How would you brick your iPod when you or after you jailbreak?

I would like to know how you would brick your iPod when and after you have jailbreaked your iPod? What are the chances? And how would you be able to recover it?
Thank you,
Khenu

Read this article: http://support.apple.com/kb/ht3743
Other than that we cannot help you with any jailbreaking issues.

Similar Messages

How do you get back in your ipod when you forgot the password

how do you get back in your ipod when you forgot the password?

Connect the iPod to your computer and restore. Place the iPod in recovery mode if necessary. For recovery mode:
iPhone and iPod touch: Unable to update or restore

HT1689 how do you unlock your ipod when its disabled?

how do you unlock your ipod when its disabled?

This is the same thing:
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Just what do you not understand?

HT201210 who do you unlock your ipod when you forgot the password

How do you unlcok your ipod when you forgot the password

Connect the iOS device to your computer and restore via iTunes. Place the iPod in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Backing up, updating, and restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the iPod backup that iTunes makes.
You can redownload iTuns purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It does not allow you to change a password. How would you do that?

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It only allows you to view and delete site passwords. It does not allow you to change a password. How would you do that?

If you enter a new password Firefox should offer to change the password.
*You may not need to delete the old password. Try "Refreshing" the page, entering the site again, you may need to let Firefox fill in the old password, then enter the new password, and Firefox should ask to save the new password. See:
**http://kb.mozillazine.org/Deleting_autocomplete_entries
*If you delete the old password, you may need to "Refresh" the site after deleting the old password.
If you want to delete the password that has been saved do the following:
#In the Tools menu select Options to open the options window
#Go to the Security panel
#Click the "Saved Passwords" button to open the passwords manager
#Select the site in the list, then click Remove
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape 8.3.0 (''Note: this is a very old version and installing the current version may not delete it or overwrite it. To avoid possible problems with having 2 versions installed on your system, you may want to remove the old version in Windows Control Panel > Add or Remove Programs before installing the new version'').
*Shockwave Flash 10.3 r181 (''this may be current but a new version was released on 2011-06-14 with a ".26" after the "181". You can use the Plugin Check below and/or look in Add-ons > Plugins for the version of Shockwave Flash that you have installed. The newest version will be shown in Add-ons > Plugins as "Shockwave Flash 10.3.181.26"'').
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

How would you use Aperture 3 Labels & Flags in your workflow?

Now that A3 has the ability to use Labels & Flags, I'm trying to incorporate their use into my workflow but am struggling to find the most effective way.
I've used the star rating for selections & refining the selections. In A2 I used keywords on images to indicate actions on the images, however I never thought this was an elegant solution because unless I forget to remove them they stay with the images as I export them. Fundamentally though I think of Keywords as attributes of the image, so using keywords to describe actions was always strange.
One thing I liked with this workflow though was I could place multiple "actions" on an image since there can be any number of keywords. In A3 you can only assign one labe at a time. So this made me think of how I'd use Labels.
So thus my question: how would you incorporate labels & flags into your existing workflows consisting of star ratings & keywords?

I've wanted flags for a long time just to be able to mark where I left off on a project. My inelegant solution has been to give a terrible picture 5 stars. Other uses are to quickly get back to certain images.
I don't yet know how exactly I'll use labels or what other uses I'll have for flags, but I'm happy to have the added versatility. Between flags and labels, I have 8 new ways to mark and filter images. (10 if you count no flag and no label.) Sure one can do a lot with stars, stacks and keywords, but now one can do more.
DLS

How would you configure your database?

How would you configure your disks with those specifications?
General Database Characteristics:
os is Oracle Enterprise Linux 64 bit
Enterprise Edition
180GIG size database.
High "oltp" environment.
Estimated growth of 40 to 60GIG/year
20GIG of archivelogs/Day
Flashback time is 24 hours:120GIG of flashback space in avg
Local backup. Full database copy, then incremental is the preferred method.
That way, if a datafile goes bezerk, replace with backup datafile then recover.
Or if only a few corrupt block, block recover with rman.
BTW: Backup is done locally first, then send to another server, than on tape.
Archivelogs is duplexed on another server.
General Hardware Info:
Server Platform: Dell PowerEdge 1950
16 GIG RAM
2 * 64 bit CPU's
2 * local 300G/15rpm disks
Storage: Dell PowerVault MD3000
15 * 300G/15rpm Disks
Possibility for 17 disks here.
Here is my configuration so far:
OS+ oracle binary + Online Redo Logs Copy 1 + Control File Copy 1: 2 disks raid 1
flashback + backup + Online Redo Logs Copy 2 + Control File Copy 2: 4 disks raid 1 or 10
archivelogs: 2 disks raid 1
Temporary Datafiles: 1 disk no raid
UNDO Datafiles: 2 disks raid 1
Datafiles 6 disk raid10
total 17 disks: + spare disks on the side of one ever fails
1) How would you configure it with those specs?
2) Is there missing info to make a particular decision?

Here is my reply concerning data separate from index files:
See http://www.dizwell.com/prod/node/751 for the complete article.
"Why wouldn't you keep indexes separate from their tables?! Because doing so makes no difference to performance... and I patiently explained that a table and its index are never accessed simultaneously by a single user so that contention between them cannot arise. And yes, in a multi-user system, of course the two could be accessed simultaneously -but so could two tables, or two indexes. "

I need to change my apple id in my ipod (it was an old email address). How would you do this?

I need to change my apple ID in my ipod touch (it was an old email address). I have changed to setting in itunes. How would you do this? - not sure what my OS is.

Go to Settings>Store (or Settings>iTunes and App Stores for iOS 6) and sign out and sign in with the other/updated account.

You used to be able to shuffle a playlist and see the order in which the songs would sync into your iPod. I haven't been able to figure that out. Can anyone help me?

You used to be able to shuffle a playlist and see the order in which the songs would sync into your iPod. I haven't been able to figure that out. Can anyone help me?

With your playlist in "List view", click on the header over the column of numbers all the way to the left. This will then reveal the true playback (and sync) order.
However, the sort order in iTunes may not agree with the sort order on your device, but that is a separate issue and seems to have too many variables to go into here.

Has anyone experienced 4G in Spokane Wa., and if so, how would you describe your experience?

Has anyone experienced 4G in Spokane Wa., and if so, how would you describe your experience?

Tina,
There's been a change in behaviour with FM11's Find/Change (as you've noticed). The dialog now retains focus after a search has been performed and is modal. However, the focus of the field for ctrl-F should place it in the Text area, regardless of platform, not execute the last operation. This is buggy behaviour and I just confirmed this on my platform (regardless of whether your in Doc A or B).
Please file a bug report at the FrameMaker Bugs & Wish List (https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform&product=63)

How would you go about retrieving your backed up data?

How would you go about retrieving your backed up data from the Time Capsule?
I have mine on auto back up (initial back up took 3 days)

Time Machine FAQ

Problem with the Photomail option within " How would you like to share ?"

I have a PC with Windows 7 and Elements 10 installed. For the past couple of days, when I attempt to share photos using the Photomail option under "How would you like to share ?" column , after selecting the recipient, I get an error message dialogue box that says : "Elements 10 Organizer has stopped working - a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". Then the Organizer stays closed down until I reopen it. However, I am able to share photos using the "Email Attachment" option.
What could be wrong with the "Photomail" option ?
Thanks

Hi,
I have seen this sort of failure caused by a permissions problem.
Try this:
Close elements
Create a shortcut on your desktop which goes direct to the organizer
Right click on that shortcut and select "Run as Administrator" (even if you are an administrator)
Now try your Photomail again
If it does work, you only need to do this once, it seems to correct itself after that.
Good luck
Brian

How would you justify extra cost of Windows Pro Version

Well remote desktop access is only possible in the Pro version. You are also future proofing your organisation when it gets big enough to warrant AD control. The cost of Pro when bought with a PC is only very little compared to the £100+ you seem to get charged when you upgrade at a later date.
With shopping around I see no price difference between Home and Pro PC's (in fact with the host of special offers at the moment they seem to be cheaper...

So recently my friend had been asking me why would we need to purchase a pro edition if we are not running an AD. How would you guys justify the extra cost of purchasing Pro version of windows compared to home editions in a small business environment to your management?
This topic first appeared in the Spiceworks Community

How would you find the pitch period of a sound signal?

Hi
I have a few questions and i would like if somebody could help me even with the smallest comment on this.
How would someone be successfully estimate the pitch period (fundamental frequency) of a 5 second sound file?How would you successfully distinguish the voiced from the unvoiced parts and how would you make sure you dont mix voiced/unvoiced sections? Finally how can you find the exact points where the pitch is at its peak throughout the signal?
Any help/comment/suggesion would be much appreciated

Hello Madgreek,
After some thought I think I may have come up with an algorithm for what we have discussed. Basically, you are interested in knowing the time intervals over which you can observe any given frequency in your signal. As you had suggested, you can examine small windows of your signal and perform FFTs on each of the small windows to determine what frequency content is contained in that window. By examining all of the windows, you will see when particular frequencies are prevalent in the original signal. You'd want to use the smallest allowable window to give you the most resolution, but one that is large enough to cover an entire period of the lowest frequency (so that you don't miss this frequency).
I have attached an example program that performs this operation. The example performs this analysis on an array that represents audio data. I am basically performing multiple FFTs (for each window) and stacking these FFTs in time to form a 3D plot. By examining the 3D plot, I can then see when in time my frequencies of interest are at their peaks. Rather than graphing these plots, you may work out a different algorithm for programmatically determining and logging these peaks and times. I hope this is what you were looking for!
Attachments:
Time Variable FFT.vi ‏250 KB

VI Analyzer - How Would You Configure It for This Use Case?

My group has different people working on different LVPROJs for each software deliverable we have. Each LVPROJ uses our user.libs and instr.libs, as well as an overall "framework" that is the same for most LVPROJs.
I really think the VI Analyzer toolkit would be powerful for code reviews, but only if I can configure it in a way where which tests I run and what the criteria are can be saved and used on any project. I can't seem to get this to work for me. I want to save all those configurations, and use it on new LVPROJs easily - the easier I can make this process, the more inclined others will be to use this for code review. How would you do it? (if it's even feasible)
Solved!
Go to Solution.

I suggest creating a .cfg file without a project linkage, but with all the tests selected and configured as you want...so a .cfg file with no "Items to Analyze" specified. Then, when working on an individual project, open that CFG file, add the project's top-level folder to the analysis, then save that CFG file with that project. This means you can't have the project linkage in your CFG file, but assuming your project is all within some top-level folder, that shouldn't be much of an issue, since the CFG file will be "linked" at that point to the top-level folder containing your project.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

How would you brick your iPod when you or after you jailbreak?

Similar Messages

Maybe you are looking for