How would you react to this?

Might not be a bad idea to show your director the cost savings of having you do the upgrade versus a consultant. Since you did the upgrade from 2003 to 2010, I'd be curious whether or not Exchange was considered mission critical then. I think you're director is being short-sighted considering the support scenario when something goes wrong. On one hand, we have a local person (you) doing the upgrade and can potentially address issues immediately, or we have an external person doing the upgrade, who doesn't know your network inside and out, and will have an inevitable delay with presenting a solution.On a personal note, it sounds like it's time to look for the next gig. Of course, I don't know the entire situation. I could see using a consultant as a way of validating your ideas or offering a second opinion. However, this reads as if the...

Little bit of background, been at my company for 8 years. Small IT staff: director, network admin (myself), a help desk tech, reporting/salesforce admin, and an intern. 2-3 years ago, got a title change to senior network admin.We've been investigating moving to O365. Not exactly my preferred thing to do, but we've been looking into it. Director went to a consultant to investigate cost of sticking with on-premise and having the same level of redundancy and upgrade to 2013/16+upgradingeveryone`sofficeversions, etcvs going with O365.I noticed professional fees to upgrade exchange ($10k) and inquired why this was there, as I performed the last upgrade myself (2003 to 2010) w/ no issues. I was basically told, since Exchange was a mission critical system, we would rely on the consultant to do the upgrade, since I wouldn't have done such an...
This topic first appeared in the Spiceworks Community

Similar Messages

How would you set up this network?

ingredients: Mac Pro, Macbook Pro, Apple TV, 1 G airport express, 1 N airport express, Airport Extreme Bass Station, 1 medium sized 1 floor apartment.
the current problem is that the network runs perfectly except for my main computer - the Mac Pro (1 year old) which always disconnects and gives me constant problems. would be nice for everything to work well so i can finally play music throughout the place.
wireless N? G? mixed? extend the wireless signal? interference robustness? and most importantly - how can i choose a channel that i know the neighbours aren't on?
any help appreciated! this has been driving me mad for 6 months now

thanks for the help! by going N I lose 1 airport express but it's worth it if it will fix things.
Like many people on here i have changed settings 9000 times to try and get the airport expresses from dropping out when streaming to them.
The main problem is the airport card in this Mac Pro - I think it is a bad one.
Running a cable would fix things probably although I dont really want cables running through the apartment, I think I will do this to avoid any further headaches.
Thanks for the input! Maybe in 1 week I will be able to buy a new Mac Pro with a new Airport card - depends on the expo!

Disable the pop-up message box "How would you like to open this file" to open pdf file??

Hi,
is there any way i can stop the pop-up box displaying to open pdf file in sharepoint document library? Right now whenever i am trying to open pdf file, asking "how would you like to open" Read only or edit mode. currently MIME Type is setup
but still pop-up message box.
Thanks in advanced!

Hi ,
As far as I know, This is a default feature. and is not recommended to delete or deactivate this pop up.
This is a feature of office and there is a dll called owssupp.dll which is responsible for getting the popup to open.
You can go to IE tools> addon settings and deactivate the above dll (sharepoint open document class). But if you do so, then the other office office files which are word/excel/pptx etc.. would aslo gets affected and they also wont get the popup.
Hope this helps.
Best Regards, Ashok Yadala

I need to change my apple id in my ipod (it was an old email address). How would you do this?

I need to change my apple ID in my ipod touch (it was an old email address). I have changed to setting in itunes. How would you do this? - not sure what my OS is.

Go to Settings>Store (or Settings>iTunes and App Stores for iOS 6) and sign out and sign in with the other/updated account.

Advice - how would you do this?

I have a compound path (an inner rectangle and an outer one) in an opacity mask. I have to apply an b/w gradient from the outer to the inner ractangle.
I can only find a feature to add circular an linear gradients!
How would you do this?

haemse,
Transitions like this are made with Blends; Object>Blend>Options to ensure the options you want, then Object>Blend>Make.
In this case you may:
1) Object>Compound Path>Release;
2) For each rectangle, set Stroke to the Fill Color and set Fill to None;
3) Select both and Object>Blend>Make (keep it Smooth).
In other words replace the Compound Path with a Blend.

How would you detect a ground like this:

I have made racing games in the past, but never a side scrolling type.
Im trying to make one similar to this: http://www.gamesfreak.net/games/Cyclo-Maniacs_3730.html
But how would you keep the player on the ground? well not stuck to the ground because we would want the player to be able to use things like ramps.
Would it be a hit test? hmmmmmmmm Any ideas? anyone.

Oh i apoligize. I pressumed because of the popularity of box2D you meant that. Well the code I have so far does a OK job for physics. Allthough i made it in intensions of a platform/side scroller. But its ok. I guess it could possibly be modified for a car or something.
Here is what i have so far:
package
          import flash.display.MovieClip;
          import flash.events.Event;
          import flash.events.MouseEvent;
          import flash.events.KeyboardEvent;
          import flash.geom.Point;
          public class DocumentMain extends MovieClip
                    public var _startMarker:StartMarker = new StartMarker;
                    public var _Player:Player;
                    public var _Boundaries:Boundaries;
                    public var _Wall:Wall;
                    public var _Floor:Floor;
                    public var _LButton:LButton = new LButton;
                    public var _RButton:RButton = new RButton;
                    public var _UButton:UButton = new UButton;
                    public var _DButton:DButton = new DButton;
                    private var _vy:Number;
                    private var _vx:Number;
                    public function DocumentMain()
                              stage.focus = stage;
                              //stage.addChild(_startMarker);
                              //_startMarker.x = 300;
                              //_startMarker.y = 300;
                              stage.addChild(_LButton);
                              _LButton.x = 80;
                              _LButton.y = 600;
                              _LButton.height = 75;
                              _LButton.width = 75;
                              _LButton.addEventListener(MouseEvent.MOUSE_DOWN, LMouseDown);
                              _LButton.addEventListener(MouseEvent.MOUSE_UP, LMouseUp);
                              stage.addChild(_RButton);
                              _RButton.x = 210;
                              _RButton.y = 600;
                              _RButton.height = 75;
                              _RButton.width = 75;
                              _RButton.addEventListener(MouseEvent.MOUSE_DOWN, RMouseDown);
                              _RButton.addEventListener(MouseEvent.MOUSE_UP, RMouseUp);
                              stage.addChild(_DButton);
                              _DButton.x = 140;
                              _DButton.y = 650;
                              _DButton.height = 75;
                              _DButton.width = 75;
                              //_DButton.addEventListener(MouseEvent.MOUSE_DOWN, DMouseDown);
                              //_DButton.addEventListener(MouseEvent.MOUSE_UP, DMouseUp);
                              stage.addChild(_UButton);
                              _UButton.x = 140;
                              _UButton.y = 550;
                              _UButton.height = 75;
                              _UButton.width = 75;
                              _UButton.addEventListener(MouseEvent.MOUSE_DOWN, UpMouseDown);
                              _UButton.addEventListener(MouseEvent.MOUSE_UP, UpMouseUp);
                              _startMarker.visible = true;
                              _startMarker.x = 500;
                              _startMarker.y = 300;
                              _vx = 0;
                              _vy = 0;
                              _Player.addEventListener(MouseEvent.MOUSE_DOWN, JumpDownHandler);
                              _Player.addEventListener(MouseEvent.MOUSE_UP, JumpUpHandler);
                              this.addEventListener(Event.ENTER_FRAME, enterFrameHandler);
                              stage.addEventListener(KeyboardEvent.KEY_DOWN, keyDownHandler);
                              stage.addEventListener(KeyboardEvent.KEY_UP, keyUpHandler);
                    private function JumpDownHandler(MouseEvent):void
                              _vy = -20;
                    private function JumpUpHandler(MouseEvent):void
                              _vy = 0;
                    private function LMouseDown(MouseEvent):void
                              _vx = -20;
                    private function LMouseUp(MouseEvent):void
                              trace("LMouseUp");
                              _vx = 0;
                    private function RMouseUp(MouseEvent):void
                              _vx = 0;
                    private function RMouseDown(MouseEvent):void
                              trace("RMouseDown");
                              _vx = 20;
                    private function UpMouseDown(MouseEvent):void
                              _vy = -20;
                    private function UpMouseUp(MouseEvent):void
                              trace("UMouseUp");
                              //_vx = 0;
                    private function enterFrameHandler(e:Event):void
                              _vy += 2;
                              //_vx += 20;
                              _Player.x += + _vx;
                              _Player.y += + _vy;
                              processAllTheCollisions();
                              scrollTheStage();
                    private function processAllTheCollisions():void
                              if (_vy > 0)
                                        if (_Player.y > 500)
                                                  _Player.x = _startMarker.x;
                                                  _Player.y = _startMarker.y;
                                                  _Boundaries.x = 0;
                                                  _Boundaries.y = 0;
                                                  _vy = 0;
                                        else
                                                  var collision:Boolean = false;
                                                  if (_Boundaries.hitTestPoint(_Player.x,_Player.y,true))
                                                            collision = true;
                                                  if (collision)
                                                            while (collision)
                                                                      _Player.y -= 0.1;
                                                                      collision = false;
                                                                      if (_Boundaries.hitTestPoint(_Player.x, _Player.y, true))
                                                                                collision = true;
                                                            _vy = 0;
                    private function scrollTheStage():void
                              _Boundaries.x += (stage.stageWidth * 0.5) - _Player.x;
                              _Player.x = stage.stageWidth * 0.5;
                              //_Boundaries.y += (stage.stage.stageHeight * 0.5) - _Player.y;
                              //_Player.y = stage.stageHeight * 0.5;
                    private function keyDownHandler(e:KeyboardEvent):void
                              switch (e.keyCode)
                                        case 37 :
                                        _vx = -20;
                                        break;
                                        case 38 :
                                        _vy = -20;
                                        break;
                                        case 39:
                                        _vx = 20;
                                        break;
                                        default:
                    private function keyUpHandler(e:KeyboardEvent):void
                              switch (e.keyCode)
                                        case 37 :
                                        case 39 :
                                        _vx = 0;
                                        break;
                                        default:

VI Analyzer - How Would You Configure It for This Use Case?

My group has different people working on different LVPROJs for each software deliverable we have. Each LVPROJ uses our user.libs and instr.libs, as well as an overall "framework" that is the same for most LVPROJs.
I really think the VI Analyzer toolkit would be powerful for code reviews, but only if I can configure it in a way where which tests I run and what the criteria are can be saved and used on any project. I can't seem to get this to work for me. I want to save all those configurations, and use it on new LVPROJs easily - the easier I can make this process, the more inclined others will be to use this for code review. How would you do it? (if it's even feasible)
Solved!
Go to Solution.

I suggest creating a .cfg file without a project linkage, but with all the tests selected and configured as you want...so a .cfg file with no "Items to Analyze" specified. Then, when working on an individual project, open that CFG file, add the project's top-level folder to the analysis, then save that CFG file with that project. This means you can't have the project linkage in your CFG file, but assuming your project is all within some top-level folder, that shouldn't be much of an issue, since the CFG file will be "linked" at that point to the top-level folder containing your project.
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

How would you make an effect like this?

Hi! I'm new to the forums, but hopefully it's ok if I start this new discussion. I'm very new to Photoshop as well (newbie).
Here is the image: http://sffbookreview.files.wordpress.com/2012/10/life-of-pi-banner.png
How would you make the image on the right - with the watercolor painting crop effect of the tiger? Also, how would you make the font on the left gradually turn to orange?
Thanks! Your help is much appreciated.

Hi there,
Here's a really quick tutorial on how to add the mask and gradient text over the image of a tiger.
Masking the Image
1) Open your image of the tiger. There should be two layers in your layers panel: the image and a white background.
2) With the tiger layer selected, click on the icon marked below in the layers panel to create a layer mask.
3) Being sure you have the mask you just created selected, paint with black using the brush tool to mask out the image. In your layers panel, if you look at the mask icon, you will see the areas where you were painting (on the canvas) change to black. Use a variety of brushes to recreate the effect in your example image.
Creating Text with a Gradient Effect
1) Use the Type Tool to create your basic text and reposition it on the page with the Move Tool.
2) In the layers panel, control click on the type layer and select Blending Options.
3) In the dialog box that opens, check the Gradient Overlay box and click on the "gradient overlay" text to move to the gradient options. Adjust the angle of the gradient, then click on the colored bar to select the colors you want. Click OK on each dialog to close them.
Final result:
I hope this helps, and please let me know if you need any more assistance.

Dates : How would you do this.

mx:DateChooser has a selectableRange property where you can set a rangeStart and a rangeEnd...
Is it possible, or how would you go about doing it so it's a nonSelectable range.
a user clicks on 3 days, so the calendar marks that off, so another user won't be able to select those same 3 days type of thing...

d'oh
.disabledRanges
*SIGH*

How would you use these Apple devices to create the best network?

I have the following devices and want to create the best network for my 3 story home:
Time Capsule 3GB, latest generation (needs to be located on middle floor in a corner room by the Comcast modem)
Time Capsule late 2009
Airport Express 2010
More data, the devices that connect to this network:
New MacBook pro (in same room with new Time Capsule)
New iMac (in same room with Time Capsule)
2009 iMac (on second floor)
Iphone 5 and 5s
ipad Minis
ipad Airs
Apple TV second generation
I've done some testing and the signal is pretty good on the second floor (meaning that the download speeds on the second floor iMac are the same as those in the same room with the new Time Capsule). But the upstairs bedrooms have speeds cut by 50%.
There is no reasonable way to connect the new Time Capsule by ethernet to any other devices.
Would it be helpful to extend the wireless network "wirelessly" with the old Time Capsule in an area upstairs with strong signal? Would the old TC then "re-pump" the signal into the bedrooms which don't have line of sight with the new TC?
How would I best do this?
Thanks for any help you can offer.

Time Capsule 3GB, latest generation (needs to be located on middle floor in a corner room by the Comcast modem)
Time Capsule late 2009
Airport Express 2010
So, the old Time Capsule and AirPort Express are near the new Time Capsule and connected to it with an Ethernet cable.....or are the old Time Capsule and Express not even in use at all?
Would it be helpful to extend the wireless network "wirelessly" with the old Time Capsule in an area upstairs with strong signal?
While it would be better if you could connect the old Time Capsule to the new Time Capsule using a wired Ethernet connection, the old Time Capsule might help things out a bit in the bedroom area if it is located where it can receive a strong wireless signal from the new Time Capsule.
This is one of those situations where performance cannot be predicted and you simply have to try it out in your home to see how well it will work. It could not hurt to use the old TC to extend the signal wirelessly to the bedroom area, if you want to give that a try.
You did not mention the AirPort Express, but it could possibly be located downstairs if you need more wireless signal coverage in a given area. The trick again, is to find a location where the Express can both receive a strong wireless signal and also provide additional wireless coverage.
Setting up the old Time Capsule or Express will only take a few minutes if you want to give things a try. Post back if you need more details on "how" to do this.

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It does not allow you to change a password. How would you do that?

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It only allows you to view and delete site passwords. It does not allow you to change a password. How would you do that?

If you enter a new password Firefox should offer to change the password.
*You may not need to delete the old password. Try "Refreshing" the page, entering the site again, you may need to let Firefox fill in the old password, then enter the new password, and Firefox should ask to save the new password. See:
**http://kb.mozillazine.org/Deleting_autocomplete_entries
*If you delete the old password, you may need to "Refresh" the site after deleting the old password.
If you want to delete the password that has been saved do the following:
#In the Tools menu select Options to open the options window
#Go to the Security panel
#Click the "Saved Passwords" button to open the passwords manager
#Select the site in the list, then click Remove
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape 8.3.0 (''Note: this is a very old version and installing the current version may not delete it or overwrite it. To avoid possible problems with having 2 versions installed on your system, you may want to remove the old version in Windows Control Panel > Add or Remove Programs before installing the new version'').
*Shockwave Flash 10.3 r181 (''this may be current but a new version was released on 2011-06-14 with a ".26" after the "181". You can use the Plugin Check below and/or look in Add-ons > Plugins for the version of Shockwave Flash that you have installed. The newest version will be shown in Add-ons > Plugins as "Shockwave Flash 10.3.181.26"'').
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Can anyone offer some advice i am looking to upgrade the OS system on one of my macbook pro's, currently running os10.4.11, I would like to upgrade to OS10.5? how would I go about this, and is there a cost, for what is an old operating system now?

Since your Mac probably came with 10.4, there is no longer a way to get 10.5 Leopard install media. IF it has the requirements, you may be able to upgrade to 10.6 Snow Leopard by buying the boxed install media at the Apple Store for $30.
System requirements are found here: http://support.apple.com/kb/SP575
General support can be found here: http://www.apple.com/support/snowleopard/

How would YOU retype these old XM08 types for use in an ABAP OO method?

The XM08 function group has the following type declarations:
TYPES: BEGIN OF mmcr_drseg_co.
        INCLUDE STRUCTURE cobl_mrm_d.
TYPES: cr LIKE drseg_cr    OCCURS 0,
       unpl_refwr TYPE refwr,
       END OF mmcr_drseg_co.
TYPES: mmcr_tdrseg TYPE mmcr_drseg OCCURS 0,
TYPES: BEGIN OF mmcr_drseg.
        INCLUDE STRUCTURE drseg.
TYPES: cr LIKE drseg_cr OCCURS 0,
       co TYPE mmcr_drseg_co OCCURS 0,
       sm LIKE drseg_sm OCCURS 0,
       charact TYPE rbcharact_instance OCCURS 3,
                                       "instances of characteristics
       uebgmat TYPE matnr,
       uebrblgp TYPE rblgp,
       selkz_db TYPE selkz,
       rblgp_old TYPE rblgp,           "rblgp before aggregation
       END OF mmcr_drseg.
How would YOU redeclare these types so that they work in an ABAP Objects class?
Some of the "fixes" are easy, like replacing "LIKE" with "TYPE:".
But what about the "INCLUDE STRUCTURE" and the "occurs 0" specifications?
The reason I'm asking this is that I have to call a method from ZXM08U16 and I'd like to be able to pass this method exactly what XXM08U16 gets from SAP, i.e. the table E_TDRSEG of type MMCR_TDRSEG

David,
I wonder it can be directly in ABAP (I would like to hear opinions from others as well!), I needed to use Data Dictionary as well:
TYPES: BEGIN OF mmcr_drseg_co.
        INCLUDE STRUCTURE cobl_mrm_d.
TYPES: cr TYPE z_tt_drseg_cr,
       unpl_refwr TYPE refwr,
       END OF mmcr_drseg_co.
z_tt_drseg_cr is a table type created in SE11, based on structure drseg_cr.
the way to create internal table and work area, based on the above:
DATA : gt_... TYPE TABLE OF mmcr_drseg_co.
DATA : gw_... TYPE mmcr_drseg_co.
hope this helps some
ec
UPDATE : Rich is right, it is possible to do it only in ABAP with the DEFAULT KEY addition.

How would you pass more than 255 args?

I have an SFTP program that currently is only passed a single file. I am modifying it so that it will loop though an array of files to simulate an mput command. Originally I was just going to call the program with each file to be transferred as an argument but noticed the 255 argument limit. I am looking at potentially having 1500 - 2000 files to transfer at one time. I am just looking for advice on how this should be designed. One idea that was forwarded to me was to just create a listing of the files on the server and use that list file as my argument. Would this be the best approach for this issue?

sdhalepaska wrote:
georgemc wrote:
sdhalepaska wrote:
georgemc wrote:
sdhalepaska wrote:
georgemc wrote:
I see no reason why you need an argument for every file.I would not necessarily need one for every file. Prior to our needing to use this for multiple files, it was easy enough to pass in one file as an argument. That is my question, how would you try to pass in a long list of files?Let's establish what you are concerned about. The 255 argument limit is on method signatures. From what you're saying here, you're talking about arguments being passed into your application from, say, the shell. Am I right?Correct, please see my clarified post. From what I have tested, the 255 argument limit appears to exist even for arguments passed to main.Ah, but arguments passed to main from the command line are passed into main as a single array of Strings, no matter how many of them there are. I have no idea what the limit on those is, but an array can hold millions of elements. I expect your shell will moan about that many, though.
As I see it, you have a few choices. Unless these files are all in different, arbitrary directories, you can specify a list of directories for your app to search. Or you can pass them all in one at a time, and see how you go. Or you can list them in a text file, pass that to your app and have it work them out. Or write a script that invokes your app multiple times. What you don't need, is a method that takes each file as an argument.Thank you for walking me through this. Would you mind telling me which way you would lean if you were designing this? The files will all be in a single directory on the server and I would not like to invoke the app multiple times as it creates a connection during each invocation. They're all in the single directory. Ok, are all the files in that directory to be transferred? If so, I'd just pass the directory name to the app, and have it iterate over all the files. If it's only to be certain ones, how do you know which ones? Is there some regex or filtering you can do on the command line?
If you are interested, the 255 argument limit for main that I tested was from this article:
[http://www.javaspecialists.eu/archive/Issue059.html|http://www.javaspecialists.eu/archive/Issue059.html]
It does die at 255 using Java 1.5.Like I said, arguments to a method are thus limited. But the args passed to an app are passed to main as one argument - an array. In short, that article is not relevant to your problem.

How would you go about saving an online image locally?

Say if you knew the url such as http://www.yahoo.com/img.jpg
How would you save this locally?

Read the answer in your previous posting:
http://forum.java.sun.com/thread.jspa?threadID=772451
Use the file as an InputStream to read the data and then use an OutputStream to write the file.
The logic is the same as reading and writing a file from disk once you have the InputStream.

How would you react to this?

Similar Messages

Maybe you are looking for