How Would You the Kernel's Running on 64-Bit Mode?

Hi. Is there an indicator in Snow Leopard to know if it's running the kernel in 64-Bit Mode? How would you know the kernel's running in 64-bit? Thank you in advance.
Gbu.

Open System Profiler in the Utilities folder. Click on the Software entry in the sidebar list. You will see the following:
Note the entry labeled, "64-bit Kernel and Extensions." If you are running the 64-bit kernel the entry will say, "Yes."

Similar Messages

For BPC how to enable Wow6432 compatibility to run in 32 bit mode on the 64

Dear friends
I am going to install BPC 7.0 so I want to enable following issues on my windows OS 64Bit
"If you run this on 64 bit hardware, you must configure it to enable
Wow6432 compatibility to run in 32 bit mode on the 64 bit system"
can any tell me solution as soon as possible
regarads
krishna
Edited by: krishna murthy on Feb 24, 2010 11:24 AM

hi,
as you read, your BPC was designed for NET1.1 which build under 32bit platform while NW AS ABAP needs 64 bit environments to run. wow3264 is to enable your 32 bit application to run on 64 bit platform in this case BPC NET component can run on 64 bit. wow3264 is windows registry keys. so you can find it in the registry value using regedit.msc.
may this help you.

The mainstage 3"run in 32 bit mode"

the mainstage 3 does not show the option "run in 32 bit mode" on my macbook air.
is it possible to make something to correct that?

MS3 is 64-bit only.

How do you verify if in 32 or 64 bit mode?

Just received my new 12 core Mac Pro. I understand they boot into 64 bit mode by default. How do I verify it is in 64 bit mode?

Open a terminal shell and type:
sudo systemsetup -setkernelbootarchitecture x86_64
To go back to the 32-bit kernel type:
sudo systemsetup -setkernelbootarchitecture i386
You can also hold down the 3 and 2 keys and/or 6 and 4 keys at boot but it will revert back to systemsetup setting if you do not specify at boot.
Keep in mind very few things actually benefit from running with the 64-bit kernel. I use 32 at the moment as I have some really old VPN software that wont initialize under 64-bit. 64-bit should not be confused with "It's faster".

If I download Firefox on Windows 7 64 bit, how do I get it to run in 32 bit mode?

I have noticed if I'm on a 64 bit PC ( I am remote support for a product that needs 32 bit browser/32 bit java to work correctly), and they have upgraded to Firefox 8.0 it seems to install and run natively in 64 bit mode, and will not recognize Java 6 29 32 bit plugin.

If there was not a problem, I would not have asked the question. I have encountered this on 9 different pcs this week alone, all of them Windows 7 64 bit and had to swap them to a different browser for Java 6 29 to work.

Disable the pop-up message box "How would you like to open this file" to open pdf file??

Hi,
is there any way i can stop the pop-up box displaying to open pdf file in sharepoint document library? Right now whenever i am trying to open pdf file, asking "how would you like to open" Read only or edit mode. currently MIME Type is setup
but still pop-up message box.
Thanks in advanced!

Hi ,
As far as I know, This is a default feature. and is not recommended to delete or deactivate this pop up.
This is a feature of office and there is a dll called owssupp.dll which is responsible for getting the popup to open.
You can go to IE tools> addon settings and deactivate the above dll (sharepoint open document class). But if you do so, then the other office office files which are word/excel/pptx etc.. would aslo gets affected and they also wont get the popup.
Hope this helps.
Best Regards, Ashok Yadala

Why won't 64-bit capable apps run in 64-bit mode under 10.6.8?

have application called Spartan '10, and it is 64-bit capable. i have set it to run in 64-bit mode in the app's preference pane. yet when i use Activity Monitor, it indicates that the app is running in 32-bit mode. is this because of the OS? will upgrading to lion/mtnlion make any difference? thx in advance to all knowledgable responders. btw, the iMac is late 2009, has the 64-bit EFI, and the OS and all related subroutines are running in 64-bit mode, according to Activity Monitor. the Spartan application is about the only thing NOT in 64-bit mode. why is this?

Yes. You have a 64-bit ROM since your model will run Mountain Lion. So, what you want to do is install Mountain Lion which will boot the 64-bit kernel by default. Otherwise: 32- or 64-bit Kernel Startup Mode Selector 1.6.
Note you may have problems in 64-bit kernel mode. Main worry is video drivers that are 32-bit and will not work in the 64-bit kernel. But give it a try. I would just ugrade OS X:
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer) - Model Identifier 7,1 or later
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer) - Model Identifier 5,1 or later
         3. MacBook Pro (Mid/Late 2007 or newer) - Model Identifier 3,1 or later
         4. MacBook Air (Late 2008 or newer) - Model Identifier 2,1 or later
         5. Mac mini (Early 2009 or newer) - Model Identifier 3,1 or later
         6. Mac Pro (Early 2008 or newer) - Model Identifier 3,1 or later
         7. Xserve (Early 2009) - Model Identifier 3,1 or later
To find the model identifier open System Profiler in the Utilities folder. It's displayed in the panel on the right.

Safari won't run in 32-bit mode?

Hi, until yesterday I was able to run Safari in 32-bit and some applications/utilities such as LiveDictionary and WebSnapper could run in this manner. Suddenly this morning the above mentioned applications don't work any more and I think the problem is that Safari for some strange reason is not running any longer in 32-bit mode. Its setting in 32-bit mode is OK. I have toggled on/off the 32-bit setting. I have reset safari. I have re-installed Livedicionary and WebSnapper, but they don't work any more. Any idea about this issue? Is there any tools to verify run-time in which mode Safari is running?
Thank you.

G'day Enzo - and welcome to the forums!
To confirm the mode of an application, simply open Activity Monitor. It will tell you what you need to know.
Personally, I am running Safari in 64bit mode... and waiting for the developers of 1Password to finally release the updated version that is fully compatible. The benefits of running in 64 bit mode are many!
Cheers,
Rodney

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It does not allow you to change a password. How would you do that?

In Security, clicking on the "Saved Password" button displays your current saved password for each site. It only allows you to view and delete site passwords. It does not allow you to change a password. How would you do that?

If you enter a new password Firefox should offer to change the password.
*You may not need to delete the old password. Try "Refreshing" the page, entering the site again, you may need to let Firefox fill in the old password, then enter the new password, and Firefox should ask to save the new password. See:
**http://kb.mozillazine.org/Deleting_autocomplete_entries
*If you delete the old password, you may need to "Refresh" the site after deleting the old password.
If you want to delete the password that has been saved do the following:
#In the Tools menu select Options to open the options window
#Go to the Security panel
#Click the "Saved Passwords" button to open the passwords manager
#Select the site in the list, then click Remove
 
 
'''You need to update the following.''' The Plugin version(s) shown below was/were submitted with your question and is/are out of date. You should update to avoid known security issues with the version(s) you have installed. Click on "More system info..." to the right of your question to see what was included with your question.
*Adobe PDF Plug-In For Firefox and Netscape 8.3.0 (''Note: this is a very old version and installing the current version may not delete it or overwrite it. To avoid possible problems with having 2 versions installed on your system, you may want to remove the old version in Windows Control Panel > Add or Remove Programs before installing the new version'').
*Shockwave Flash 10.3 r181 (''this may be current but a new version was released on 2011-06-14 with a ".26" after the "181". You can use the Plugin Check below and/or look in Add-ons > Plugins for the version of Shockwave Flash that you have installed. The newest version will be shown in Add-ons > Plugins as "Shockwave Flash 10.3.181.26"'').
*Next Generation Java Plug-in 1.6.0_24 for Mozilla browsers
#'''''Check your plugin versions''''' on either of the following links':
#*http://www.mozilla.com/en-US/plugincheck/
#*https://www-trunk.stage.mozilla.com/en-US/plugincheck/
#*'''Note: plugin check page does not have information on all plugin versions'''
#*There are plugin specific testing links available from this page:
#**http://kb.mozillazine.org/Testing_plugins
#'''Update Adobe Reader (PDF plugin):'''
#*From within your existing Adobe Reader ('''if you have it already installed'''):
#**Open the Adobe Reader program from your Programs list
#**Click Help > Check for Updates
#**Follow the prompts for updating
#**If this method works for you, skip the "Download complete installer" section below and proceed to "After the installation" below
#*Download complete installer ('''if you do NOT have Adobe Reader installed'''):
#**SAVE the installer to your hard drive (save to your Desktop so that you can find it after the download). Exit/Close Firefox. Run the installer you just downloaded.
#**Use either of the links below:
#***https://support.mozilla.com/en-US/kb/Using+the+Adobe+Reader+plugin+with+Firefox ''(click on "Installing and updating Adobe Reader")''
#***''Also see Download link''': http://get.adobe.com/reader/otherversions/
#*After the installation, start Firefox and check your version again.
#'''Update the [[Managing the Flash plugin|Flash]] plugin''' to the latest version.
#*Download and SAVE to your Desktop so you can find the installer later
#*If you do not have the current version, click on the "Player Download Center" link on the "'''Download and information'''" or "'''Download Manual installers'''" below
#*After download is complete, exit Firefox
#*Click on the installer you just downloaded and install
#**Windows 7 and Vista: may need to right-click the installer and choose "Run as Administrator"
#*Start Firefox and check your version again or test the installation by going back to the download link below
#*'''Download and information''': http://www.adobe.com/software/flash/about/
#**Use Firefox to go to the above site to update the Firefox plugin (will also install plugin for most other browsers; except IE)
#**Use IE to go to the above site to update the IE ActiveX
#*'''Download Manual installers'''.
#**http://kb2.adobe.com/cps/191/tn_19166.html#main_ManualInstaller
#**Note separate links for:
#***Plugin for Firefox and most other browsers
#***ActiveX for IE
#'''Update the [[Java]] plugin''' to the latest version.
#*Download site: http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
#**'''''Be sure to un-check the Yahoo Toolbar option during the install if you do not want it installed.
#*Also see "Manual Update" in this article to update from the Java Control Panel in Windows Control Panel: http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates
#* Removing old versions (if needed): http://www.java.com/en/download/faq/remove_olderversions.xml
#* Remove multiple Java Console extensions (if needed): http://kb.mozillazine.org/Firefox_:_FAQs_:_Install_Java#Multiple_Java_Console_extensions
#*Java Test: http://www.java.com/en/download/help/testvm.xml

How would you determine the total ram used by applets?

hi guys;
I have 2 applets.
One applet runs in a browswer. - in the microsoft jvm.
Another applet on another browser (or another page) - in the sun plugin.
How would you guys determine the total RAM (not just heap memory) used by these applets.
my strategy would be to open up the browser. and look at the memory next to that internet explorer process. Then I would open up another browser with applet and see total memory taken. Then I would subtract to determine the difference.
Does this sound correct?
Each applet has multiple jar files associated with it.
Stev

What you really should do is test your applet on a bunch of machines, like a 32 meg ram win 98, 64 meg ram win NT, and a 256 meg ram win 2000, and then give them a performance report under the different configurations. That's really what they're after (probably)

Problem with the Photomail option within " How would you like to share ?"

I have a PC with Windows 7 and Elements 10 installed. For the past couple of days, when I attempt to share photos using the Photomail option under "How would you like to share ?" column , after selecting the recipient, I get an error message dialogue box that says : "Elements 10 Organizer has stopped working - a problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available". Then the Organizer stays closed down until I reopen it. However, I am able to share photos using the "Email Attachment" option.
What could be wrong with the "Photomail" option ?
Thanks

Hi,
I have seen this sort of failure caused by a permissions problem.
Try this:
Close elements
Create a shortcut on your desktop which goes direct to the organizer
Right click on that shortcut and select "Run as Administrator" (even if you are an administrator)
Now try your Photomail again
If it does work, you only need to do this once, it seems to correct itself after that.
Good luck
Brian

How would you describe the function of 'Camera roll'?

How would you describe the function of 'Camera roll'?

ITs the folder that stores pictures taken with the camera or downloaded from the web. Or stored from Apps running on the iPad.
Basically any picture or image created on the iPad will reside in there.

I recently developed an application for my company and now they would like the applications to run on all their ipads and samsung galaxies. I was able to put the app on the Samsungs however though I have no idea how I can get it on the ipad

I recently developed an application for my company and now they would like the applications to run on all their ipads and samsung galaxies. I was able to put the app on the Samsungs however though I have no idea how I can get it on the ipad

Go to this website and read the information. If you can't find a link to anything that's appropriate for your needs, click on the support link at the top.
https://developer.apple.com/programs/ios/

How would you capture the stdout of Runtime.getRuntime().exec())?

How would you capture the stdout of Runtime.getRuntime().exec())?
Say you wanted to execute PKZIP25.exe from java using Runtime.getRuntime().exec(). How would you capture the output of PKZIP25 (the console IO) in a file so you could check the results?
Thanks
Bill Blalock

Thanks.
Could you explain a little more?
The program I am calling seems to be executing, as far as Java is concerned, but nothing happens. I imagine I have made mistakes in calling it but can't see the output to the console.
Should I use Runtime.getRuntime().exec() or Runtime.exec() for something like this?
I appreciate the help!
Bill B.

How would you find the pitch period of a sound signal?

Hi
I have a few questions and i would like if somebody could help me even with the smallest comment on this.
How would someone be successfully estimate the pitch period (fundamental frequency) of a 5 second sound file?How would you successfully distinguish the voiced from the unvoiced parts and how would you make sure you dont mix voiced/unvoiced sections? Finally how can you find the exact points where the pitch is at its peak throughout the signal?
Any help/comment/suggesion would be much appreciated

Hello Madgreek,
After some thought I think I may have come up with an algorithm for what we have discussed. Basically, you are interested in knowing the time intervals over which you can observe any given frequency in your signal. As you had suggested, you can examine small windows of your signal and perform FFTs on each of the small windows to determine what frequency content is contained in that window. By examining all of the windows, you will see when particular frequencies are prevalent in the original signal. You'd want to use the smallest allowable window to give you the most resolution, but one that is large enough to cover an entire period of the lowest frequency (so that you don't miss this frequency).
I have attached an example program that performs this operation. The example performs this analysis on an array that represents audio data. I am basically performing multiple FFTs (for each window) and stacking these FFTs in time to form a 3D plot. By examining the 3D plot, I can then see when in time my frequencies of interest are at their peaks. Rather than graphing these plots, you may work out a different algorithm for programmatically determining and logging these peaks and times. I hope this is what you were looking for!
Attachments:
Time Variable FFT.vi ‏250 KB

How Would You the Kernel's Running on 64-Bit Mode?

Similar Messages

Maybe you are looking for