How you make recend uploads appear in the recently added folder

When adding to itunes library, how do you make the selections appear in the recently added folder. The folder was deleted but rebuilt.

It is a mixed playlist and finally I came up with an answer; it might sound strange but I woke up from a nap with all correct settings figured out.
This is what I did:
I had to specify a subset for every podcast or I would end up with every episode available on my library which in turn would reach the limit I set but that's OK. I noticed though, that podcast won't sync to iTunes Match, which is a bummer, but still they sync over Wi-Fi. This is what I got finally:
Thanks for all your help!

Similar Messages

Today I imported quite a lot of Audio CDs. When I wanted to listen to them I realised that most of them aren't in my library. And they did not appear in the recently added list either. Can anyone tell me what happened and where to find them? Thanks!

Today I imported quite a lot of Audio CDs. When I wanted to listen to them I realised that most of them aren't in my library. And they did not appear in the recently added list either. Can anyone tell me what happened and where to find them? It's really strange because all the imorts definitely finished. Thanks!

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

Yesterday i sync music to my ipod touch from iTunesn but nothing showed up in the 'recently added' folder. now today neither my computer or iTunes is recognizing the ipod. I uninstalled iTunes and reinstalled it and restart the computer

Yesterday i synced my music to my ipod touch from iTunes. the musice went on but nothing showed up on the ipod in the 'recently added' folder. now today i went to connect it to the laptop and neither my computer or iTunes recognized the ipod. 1st a message showed up saying an ipod was detected but cuddn't be identified so reconnect and when i did nothing showed up again. i have uninstalled and reinstalled iTunes and restarted the computer a number of times but the ipod still wont show up. Can anybody help?

Here:
iOS: Device not recognized in iTunes for Windows
or
iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X
Does the iPod charge?
Have you tried another cable?
Another computer to help determine if you have an iPod or computer problem?

I cannot access the recently added folder in Instagram on my iPad. Any ideas why?

when trying to access photos on my iPad in Instagram I can access my shared photo streams but not the recently added folder and the photos taken on my iPhone. Any ideas?

Hello wintergreenchip,
The troubleshooting steps detailed below can help get your Photo Stream working correctly.
Your device will keep up to 1000 photos, even if they're older than 30 days. Photos older than 30 days are removed from the iCloud server, so your devices might not have the same photos, depending on when you enabled My Photo Stream. Due to storage limitations, your Apple TV might display only your most recent photos.
If you want to have the most current photos in My Photo Stream on each of your devices and delete the older photos:
If there are any photos in My Photo Stream that you want to keep, save them to your Camera Roll, then back up your Camera Roll and other data using iCloud or iTunes.
Turn My Photo Stream off in Settings > iCloud > Photos (or Photo Stream in iOS 6).
Confirm that you wish to Delete Photos.
Turn My Photo Stream back on. iCloud will automatically push your stored photos to your device.
Repeat these steps for each device.
iCloud: Get help using My Photo Stream
http://support.apple.com/kb/TS3989
Cheers,
Allen

How do I add specific podcasts to the Recently Added Smart Playlist?

Well,
I guess the question is very self-explanatory, still; I subscribe to several podcast, most of them are news and I have a couple of them that are music that I'd like to add to the Recently Added Smart Playlist.
By default the this playlist has the criteria Media Kind is not Podcast, so when I specify a podcast it'll not appear and if I remove this criteria, all the podcasts will appear which of course I don't want. I could just specify every single podcast I don't want but the problem would be that I'd have to keep editing the playlist everytime I subscribe to a new one; a thing I don't feel very comfortable with.
I tried using subcriteria but the Media Kind is not Podcast just overrules everything I add afterwards.
I'll really appreciate any help you can give me. I'm attaching a screenshot with the lastest config I put in–which doesn't work–so you can give yourselves an idea of what I'm doing.

It is a mixed playlist and finally I came up with an answer; it might sound strange but I woke up from a nap with all correct settings figured out.
This is what I did:
I had to specify a subset for every podcast or I would end up with every episode available on my library which in turn would reach the limit I set but that's OK. I noticed though, that podcast won't sync to iTunes Match, which is a bummer, but still they sync over Wi-Fi. This is what I got finally:
Thanks for all your help!

Importing cd's and suddenly can't see the recently added folder, have been unable to figure out how to re-display it, know the songs are going somewhere

Was importing cd's and suddenly can't see recently added folder, been unable to figure out how to re-display it, know the songs are going somewhere

See Restore Original Smart Playlists.
tt2

How to make my addon appear on the menuitem list on sap b1 startup?

Hi,
I developed a sample "ui addon" that is supposed to create a new menuitem and display a form when clicked.
I was able to install it using the b1de installation wizard and everything appears to be working...
The problem:
After installing the addon, the only way for it to start is to set the "Default Group", in the "Add-on Admnistration window", to "manual" and than go to the "Add-on Manager" select it from the list and hit "Start" to make it run. The problem is that i have to do this everytime i want the addon to run and what i wanted to know is how to make it start automatically everytime i start sap b1.
I already tried setting the default group to automatic, but sap changes it to manual in the Add-on Manager. Am i doing something wrong?
Thank you for your time,
Patricia

HI Patricia,
The the user settings, and set the at the user settings to automatic.
The best way is mandatory, if you have any required functionality inside. (this can be set at ard file generation using the Mandatory check box).
Regards,
J.

How to make a JDialog appear in the middle of screen

hi,
how does one make a JDialog or JFrame appear in the middle of the screen, instead of on the (default?) left upper corner?

http://forum.java.sun.com/thread.jsp?forum=257&thread=117138
Søren

Restore the "recently added" folder

In iTunes I deleted the icon/folder "recently added" for some strange reason so I tried to get it back by adding a custom folder by the same name but iTunes won't put recently added stuff in there [i understand that] I can't figure out how to restore the default folder. I bet others have done this with other folder icons too so you could kill a couple of birds with a couple of clicks.
Custom Built Windows XP Pro AMD 3000+ Sempron - 200 gig HDD - 1 gig Ram - 512 mg Graphics - FX128 Sound - WiFi DSL - 60 gig Video iPod

You need to make a smart playlist.
File -> New Smart Playlist
Pick "Date Added" "is in the last" 2 "weeks"
Make sure "Live Updating" is checked

After rotobrush, how to make background picture appear in the video when exporting it to PremierePro

I seem to have problems saving/using it with premiere pro. it's a 10 second video of myself with 3 pics: 2 that I put in front of the video and one as a background. In after effects, in the bottom left corner box, the 2 pics are above the video file and the background picture is below it. Still in after effects, the background pic is there behind me and the 2 other pictures are in front of my video which is where everything should be, great. When i save it, then export it to premiere pro, the 2 pics in front are there but not the background pic, the background is just my full video as if I didn't rotobrush it. Help??
Also, how can i export the project as a file in Avi, mpeg, mp4...?
Thanks in advance

Hello Mylenium, i do apologize about my ambiguous question. I'm starting to learn how to use it and in some way, i didn't even know what i was talking about myself. But thanks to your help, i now got it.
"When you export an After Effects project as an Adobe Premiere Pro project, Adobe Premiere Pro uses the settings from the first composition in the After Effects project for all subsequent sequences. Keyframes, effects, and other properties are converted in the same way as when you paste an After Effects layer into an Adobe Premiere Pro sequence."
so as it says above, it only uses the initial video. What i did was only render using the rotobrush and i didn't "render queue" the whole project afterwards simply because i didn't know i had to do that. I thought rendering it from rotobrushing it and adding the background effects would be enough.
Again, thank you. and i also learned how to save it in different format, since AVI outputs a huge file size.

How to make NetBoot images appear in the option boot screen?

So I have a NetBoot server. Yay! Everything works great, but I want certain images to appear when you option boot the machine. Is this possible?

Hi C.Slagel, As far as I'm aware the only way to do this is with multiple netboot servers. You can get the netboot server icon up from option booting by pressing the n key at the boot manager screen.
Hope this helps.
Cheers

How to make an UDF appear in the CFL list?

Hi,
I am wondering if CFL can display my UDF on an system object. For example, I add an UDF called my_udf in Item Master. When user select item master in other form from an CFL window, how i can let user to be able see my UDF in the CFL window?
Thanks!
Lan

Hello
>I am wondering if CFL can display my UDF on an system object.
Yes it is possible
I add an UDF called my_udf in Item Master. When user select item master in other form from an CFL window, how i can let user to be able see my UDF in the CFL window?
1.open Item Master data form in find mode
2. enter * into itemcode, press find
3. press form settings after the CFL has opened
4. select your UDF from the list of avaiable fields
5. press update
6. close CFL and open it again, your UDF of Item Master will be displayed
You can use SDK to add a UDF into an existing / new CFL. DI API oject name: ChooseFromList (same as UI API)
sample code:
Private Sub AddCFL_DI(ByVal objectType As String, ByVal FieldName As String)
        Dim oCFL_DI As SAPbobsCOM.ChooseFromList = oCompany.GetBusinessObject(BoObjectTypes.oChooseFromList)
        Try
            If oCFL_DI.GetByKey(objectType) = False Then
                Throw New Exception("CFL not defined")
            End If
            oCFL_DI.ChooseFromList_Lines.Add()
            oCFL_DI.ChooseFromList_Lines.SetCurrentLine(oCFL_DI.ChooseFromList_Lines.Count - 1)
            oCFL_DI.ChooseFromList_Lines.FieldNo = "UDFNAME"
            If oCFL_DI.Update <> 0 Then
                Throw New Exception(oCompany.GetLastErrorDescription)
            End If
        Catch ex As Exception
            sbo_application.StatusBar.SetText(ex.Message)
        End Try
    End Sub
Regrads
János

How to make copied text appear in the correct order?

I have a PDF document with text created from a Photoshop file.
There were multiple text layers in this Photoshop document.
Problem:
When I do "select all text" in Acrobat and then "copy" and then paste it into a text editor the text is pasted out of order.
This is somewhat expectable because of the multiple text layers in the original Photoshop file.
Question:
How can I tell Photoshop the desired order of the text layers when creating the PDF file?
The layers are stacked in the correct order in the layer panel in Photoshop. I was hoping that was the issue, but it's not. Is there any other way in which I can specify the text order?
Your help will be much appreciated!

This is a screen capture taken of Acrobat XI Pro. In the left-hand side try right-clicking (or Ctrl-click on the Mac) ont he navigation pane and then choosing Content.

How do I extend the lifetime of the Recently Added playlist?

When songs are downloaded into iTunes they appear in the "Recently Added" playlist for a while. After an unknown (by me at least) period of time, they disappear. Can I adjust the period of time, say to three, six, nine or twelve months, whare the songs would still appear in the "Recently Added" playlist?

Control-click the playlist, choose Edit Playlist, and change the Date Added cutoff.
(36412)

Recently Added Folder Deleted...How Do I Get It Back???

I mistakenly deleted the "recently added folder" on my iTunes page. Does anyone know how I can retrieve it, or re-add it????
Thanks....
Kevin.

I think you can re-add it in File > New Smart Playlist at the top left of iTunes
hope I could help
Message was edited by: Westlife_Lillix21

How you make recend uploads appear in the recently added folder

Similar Messages

Maybe you are looking for