. However I do no wish to see the {p} on the page when using spry

When I use the spry table and details regions and say I have
a xml tag <p> that I join to my page by the {p}
tag.
If preview the page in the browser I see the {p} just before
the xml data is loaded. However I do no wish to see the {p} on the
page. Is there a way to stop this?

you can see an example of this happening at
http://ecommercetotal.co.uk/services.php

Similar Messages

Is there a way to remove the blurred background wallpaper effect when using the phone in iPhone 4S' iOS 7?

Hello.
A few nights ago, my picky client finally upgraded his iPhone 4S' iOS 6 to iOS 7. He doesn't like the blurred background wallpaper image when using the phone feature (e.g., calling and talking). Is there a way to disable this new visual effect like in iOS 6? I am pretty sure this is by design by Apple.
Thank you in advance.

sberman wrote:
I'm not completely sure I understand, but ...
Might Settings > General > Accessibility > Reduce Motion = "On" do what the customer wants?
I will tell him about that, but I don't think that would be it if that is related to animation.
We're talking about the wallpaper background that get blurry during the phone screens like http://www.tekrevue.com/wp-content/uploads/2013/09/20130923_ios7emergencycallfla w.jpg (left side) and http://i.i.cbsi.com/cnwk.1d/i/tim2/2013/09/20/ChangingYourTheme.png ... You can see there are background images that got blurred out.

HT1947 The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1. This seem to happen after the update. Any suggestions?

The gyro no longer works when using the remote app on my iPad. I updated to iOS 7.0.1.
This seem to happen after the update. Any suggestions?

Dear Apple friends,
I have the exact same problem with some apps.
Even when I try some websites in Safari and Chrome that require loading big chunks of data they crash.
Today it crashed in two new places. In the notification center and when I opened newstand app I no longer was able to return to the main window and the dock disappeared.
I have my ipad retina for about three months now but latelly this issue has became more frequent. What should I do?
Should I update to the latest firmware and do what raymond73 said?
Is there a fix for this issue?
Has Apple said anything about this? Because I see that this issue is happening to a lot of people.
Is it possible to downgrade to iOS 6?
Is it a firmware problem? That can be fixed in future releases? Or an hardware issue?
Should I wait or go to the place I bought it and try to get the money back?

The settings box is always in the middle of my screen when using Flash Player , Won't close?

The settings box is always in the middle of my screen when using Flash Player , Won't close ?

See:How do I do a clean install of Flash Player?
It should work ok after that.

Developing a 2 page form, username on the 1st page, password on 2nd how can i force FF to use the username from previous page when it asks to remember acct info?

I am developing a 2 page signup form, where the person enters their username on the 1st page and password on the 2nd.
When I test the form, FF asks to remember my password for the site - however it thinks the zipcode (field above the password) is the username on the account.
I have tried to put their username/email in a hidden field on the 2nd page, just above the password field - and that did not work.
How can i force FF to use the username from previous page when it asks to remember acct info?

This website is using autocomplete=off to prevent Firefox from saving and filling the name and password.
You can remove autocomplete=off with a bookmarklet to make Firefox save names and passwords and other form data.
*http://kb.mozillazine.org/User_name_and_password_not_remembered

Can I disable the "corners" that turn down when using Parallels?

Can I disable the "corners" that turn down when using Parallels?

"Auto Save" is Apple's term, I guess. Its controls are so well-hidden I'm flying blind here.
But as I put it in a note to a magazine dedicated to Apple:
I think Auto Save is one of the dumbest things Apple has ever come up with -- oh so typical of what Bill Gates used to give people: lots of extra stuff no one ever asked for, and no one at his company ever thought through.
Say there's a conflict with a program or two I'm trying to use. Machine locks up. I force quit and shut down -- probably without ever seeing the option of stopping Auto Save.
When I open up again, what am I faced with? Yup, exactly the same mess I just tried to get away from.
Boo, Apple!

Thin flickering white line at the very top of screen when using mail

using an imac 27 inch, new...
there is a thin flickering white line at the very top of screen when using mail.
usually when sending a mail or when the cursor moves over a link ( in apple mail )
the flickering line is just under the very top menu bar which has the date on etc...
anyone else had this or know how to fix it?
cheers

I am facing the same problem. In fact mac book pro 13 retina was in the 14 day period so I got it retuned today, after directions from the apple telephone support. However, the new machine I got in exchange has the same problem or flickering line under the menu tab.
The only relief it seems is the fact that it's not a hardware problem probably. I also think so because if I do a full screen which essentially means there is no menu bar, then there is no flickering white line.
Hope apple fixes this. Sad to notice this drop in apple quality, and yet not fixed.

When using my ipad air it keeps coming off the page I'm on or app and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping

When using my ipad air it keeps coming off the page I'm on or app I am using and going back to the home screen. Also when using my ipad the screen will go white with a black apple icon in the middle for about 20 seconds then it makes a ping sound and goes to the home screen. Could anyone help please. Thank you :-)

Read here:
http://help.apple.com/ipad/8/#/iPad9a245e3e

How can I make the status bar hide automatically when using safari?

How can I make the status bar hide automatically when using safari?

When Safari is in FullScreen mode, menu bar will be hidden.
Safari window to fit the screen?
Move the mouse pointer to the bottom right corner of the Safari window.
Double arrows will appear. Drag it to resize the window to fit the screen.

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

How do I set up a mail group on mac mail? All the advise on line seems to refer to 'address book' and I only have 'contacts'. The guidance does not work when using 'contacts' - can anyone help me?

Create a group and send mail
http://www.dummies.com/how-to/content/how-to-create-a-basic-contact-group-in-mac -os-x-li.html
http://www.macworld.com/article/1165582/how_to_email_groups_with_mail.html
Best.

How can I decide the size of HANA server when using DMO of SUM ?

Hi expert,
I want to execute DB migration from MS SQL to SAP HANA by using DMO of SUM.
So I have a question.
How can I decide the size of HANA server when using DMO of SUM ?
Now I have MS SQL in windows server.
But in order to use HANA , I have to prepare Linux server.
I want to know How can I decide the size of this Linux server.
Can I expect the function of data compression in HANA ?
Thanks in advance .
Kazuki.

Kazuki,
Please take attetion:
Your linux box already created = Application server:
Application Server
Based on the measurements SAP doesn't expect any changes concerning CPU, memory and network requirements for the ABAP application server. This means that the existing hardware and network infrastructure can still be used. Please check the PAM (www.service.sap.com/pam) for further details.
SAP HANA Appliance ( porvided by your hardware partner)
Consider SAP Note recommendation for HANA Main Memory, HANA CPU and HANA Disk Space.
Regards,
Edinaldo Junior

[svn:fx-trunk] 10545: Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts

Revision: 10545
Author:   [email protected]
Date:     2009-09-23 13:33:21 -0700 (Wed, 23 Sep 2009)
Log Message:
Make DataGrid smarter about when and how to calculate the modulefactory for its renderers when using embedded fonts
QE Notes: 2 Mustella tests fail:
components/DataGrid/DataGrid_HaloSkin/Properties/datagrid_properties_columns_halo datagrid_properties_columns_increase0to1_halo
components/DataGrid/DataGrid_SparkSkin/Properties/datagrid_properties_columns datagrid_properties_columns_increase0to1
These fixes get us to measure the embedded fonts correctly when going from 0 columns to a set of columns so rowHeight will be different (and better) in those scenarios
Doc Notes: None
Bugs: SDK-15241
Reviewer: Darrell
API Change: No
Is noteworthy for integration: No
tests: checkintests mustella/browser/DataGrid
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-15241
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/DataGrid.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridBase .as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/controls/dataGridClasses/DataGridColu mn.as

Hi Matthias,
Sorry, if this reply seems like a products plug (which it is), but this is really how we solve this software engineering challenge at JKI...
At JKI, we create VI Packages (which are basically installers for LabVIEW instrument drivers and toolkits) of our reusable code (using the package building capabilities of VIPM Professional). We keep a VI Package Configuration file (that includes a copy of the actual packages) in each of our project folders (and check it into source code control just as we do for all our project files). We also use VIPM Enterprise to distribute new VI Packages over the network.
Also, as others have mentioned, we use the JKI TortoiseSVN Tool to make it easy to use TortoiseSVN directly from LabVIEW.
Please feel free to contact JKI if you have any specific questions about these products.
Thanks,
-Jim

What is the type of backup file when using ovi sui...

Hi there....
Where is the backup file usually stored when using ovi suite??
what is the type of the file when i want to search in windows viasta???
THANK YOU
Solved!
Go to Solution.

The backup file will have a ".nbu" file extension. You can view (and edit) the default saving location by going to Tools>Options>My devices.
Attachments:
ovi_suite_backup.jpg ‏93 KB

How can i turn off all the mails that i recive when use any program form my iPad?

How can i turn off all the mails that i recive when use any program form my iPad?

Everytime i use the my ID recive an e Mail to inform me.

Why is the Tick Count function slow when used with a .dll but fine with normal lab view code?

when using the Tick Count millisecond timer with a .dll I've written in C, I'm getting some odd timing issues.
When I code the function I want (I'll explain it below in case it helps) in LV and run it as a subVI, feeding it the Tick count as an argument, the function runs quickly, but not quite as quickly as I would like. When I feed this same subVI just an integer constant rather than the Tick Count, it takes about the same amount of time, maybe a tiny bit more on average.
When I bring in my function from a .dll, however, I start to run into problems. When I feed my function an integer constant, it is much faster than my subVI written in LV. When I feel my .dll the Tick Count, however, it slows down tremendously. I'm including a table with the times below:
             | Clock   |   Constant   |
SubVi:   | 450ms | 465ms       |
.dll         | 4900ms| 75ms         |
This is running the function 100,000 times. The function basically shifts the contents of a 2-dimensional array one place. For this function, it probably won't be a huge deal for me, but I plan on moving some of my other code out of LV and into C to speed it up, so I'd really like to figure this out.
Thanks,
Aaron

Hi Aaron,
Thanks for posting the code -- that made things a lot clearer for me. I believe I know what's going on here, and the good news is that it's easy to correct! (You shouldn't apologize for this though, as even an experienced LabVIEW programmer could run into a similar situation.) Let me explain...
When you set your Call Library Function Node to run in the UI Thread you're telling LabVIEW that your DLL is not Thread-safe -- this means that under no circumstances should the DLL be called from more than one place at a time. Since LabVIEW itself is inherently multithreaded the way to work with a "thread-unsafe" DLL is to run it in a dedicated thread -- in this case, the UI thread. This safety comes at a price, however, as your program will have to constantly thread-swap to call the DLL and then execute block diagram code. This thread-swapping can come with a performance hit, which is what you're seeing in your application.
The reason your "MSTick fine behavior.vi" works is that it isn't swapping threads with each iteration of the for loop -- same with the "MSTick bad behavior.vi" without the Tick Count function. When you introduce the Tick Count Function in the for loop, LabVIEW now has to swap threads every single iteration -- this is where your performance issues originate. In fact, you could reproduce the same behavior with any function (not just TIck Count) or any DLL. You could even make your "MSTick fine behavior.vi" misbehave by placing a control property node in the for loop. (Property nodes are also executed in the UI thread).
So what's the solution? If your DLL is thread-safe, configure the call library function node to be "reentrant." You should see a pretty drastic reduction in the amount of time it takes your code to execute. In general, you can tell if your DLL is thread-safe when:
The code is thread safe when it does not store any global data, such as global variables, files on disk, and so on.
The code is thread safe when it does not access any hardware. In other words, the code does not contain register-level programming.
The code is thread safe when it does not make any calls to any functions, shared libraries, or drivers that are not thread safe.
The code is thread safe when it uses semaphores or mutexes to protect access to global resources.
The code is thread safe when it is called by only one non-reentrant VI.
There are also a few documents on the website that you may want to take a look at, if you want some more details on this:
Configuring the Call Library Function Node
An Overview of Accessing DLLs or Shared Libraries from LabVIEW
VI Execution Speed
I hope this helps clear-up some confusion -- best of luck with your application!
Charlie S.
Visit ni.com/gettingstarted for step-by-step help in setting up your system

. However I do no wish to see the {p} on the page when using spry

Similar Messages

Maybe you are looking for