HOWTO: accountActivation -step 1, step 2

I am really confused on how to do something. I am emailing my new users a URL with a parameter which has their account info I need to "activate" their account. I have a single session bean that is shared between two pages (registrationActivation.jsp and registrationActivation2.jsp). My first problem was getting the parameter out of the URL. The examples of
(String)this.getFacesContext().getExternalContext().getRequestParameterMap().get("parm");rarely worked (my best guess is because of which phase it was being called in?). Anyway, I finally put that code in a property getter linked to a hidden field at the bottom of my form and it is getting the value and storing it in bean (which is now (hopefully) in the session scope (managed bean setting)).
Here's the question: ra.jsp has created a session bean and populated it. Now I need to redirect to ra2.jsp and somehow trigger an action event that will do the work. If the work succeeds, the navigation has it returning to itself (ra2.jsp) which has rendered= logic that display/hides messages as appropriate.
So, just how does one do this? I've googled until I'm blind and nothing has helped. I had hoped that the <body onload="#{event}"> syntax would have been valid, but apparently it is not. :(
Thanks!

Ok, I've got the redirection working, but still no "event trigger".
    public String getExtractUrlParameter() {
        String ls_temp = (String)this.getFacesContext().getExternalContext().getRequestParameterMap().get("parm");
        if ( ls_temp != null ) {
            cs_parameter_usercn = ls_temp;
            this.triggerActivation();
        return cs_parameter_usercn;
    // action methods
    public String triggerActivation() {
        FacesContext context = this.getFacesContext();
        try {
            context.getExternalContext().redirect("/OagPortalRegistration/registrationActivation2.jsf");
        } catch (IOException e) {
            e.printStackTrace();
        context.responseComplete();
    }

Similar Messages

Step By Step Example for Application Integrator for Yahoo or any kind of

All EP Expert,
I want to create yahoo or Gmail or any kind of url iView on which I can implement SSO for learning purpose on my Local laptop.
I have installed EP SP9 on my laptop.
I go through some blog and some discussion but I am not able to find below files mentioned in those blog.
1. AppIntegrator.zip file to find two files
2. com.sap.portal.howtos.webapp.par file
3. HowToUseAppIntegrator_en.pdf file
So I am not able to perform step by step instruction as mentioned in blogs.
Can any one provide me any kind of documents for EP SP9 for Application Intigrator functionality basically I am interested to integrate JAva base application in my portal with SSO but if any one can provide for Yahoo or Gmail for EP SP9 it will be a great help.
Thanks and waiting for some help on this form all EP experts.
I will reward full points for right answer.
Thanks in Advance.
Ashish.

Hi Mona,
Thank you very much for your prompt reply. I really appreciate if you can provide me exact location from where I can download "Application Integrator" zip file from which I can extract "com.sap.portal.howtos.webapp.par" file as describe in example PDF file. I tried very hard to find on SDN and "help.sap.com" but could not find it.
If you have it with you then please send it to me on my email ID [email protected]
Or please tell me exact location from where I can download it.
I give 10 points for this help.
Thanks in Advance.
Ashish.

Step by step example

Hi,
can anybody tell me where I can find visual composer example? Any link with example step by step?
Thanks a lot.
Regards.

Hi,
You can follow the Getting Started page:
Getting Started with Visual Composer for SAP NetWeaver 7.0
or the HowTo Guides:
SAP NetWeaver Visual Composer - How to Guides

Menu Exit & Screen Exit Implementation Step by Step Implementation Needed:

Hi Experts,
I am in need of how to implement Menu Exit and Screen Exit using a simple
example.If any step by step implementation through snapshots were it will be
helpful instead just some links that doesn't work after some steps due to version
changes or not proper steply explanations.Points will be rewarded accordingly.
Thanks for your help in Advance.

Hi Sudha,
Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data.
It is determined be SAP where the sub screen will be displayed.
The syntax is: CALL CUSTOMER-SUBSCREEN
The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project, and the project has been activated.
Note:
Function codes are only processed in the main screens flow logic
You are not allowed to enter a name for the subscreens command field
You are not allowed to define GUI stauses
You are not allowed to enter a value for Next screen
The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules. These function modules belongs to the same function group as the subscreen
Subscreens are edited with transaction CMOD. When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next time you display the calling screen
The developer must create the subscreen and the corresponding PBO and PAI modules
How to identify screen exits
Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify.
Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits
MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
USER EXITS
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is: EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as: CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
xvbak = vbak
xvbuk = vbuk
xkomk = tkomk
importing
lvf_subrc = lvf_subrc
tables
xvbfa = xvbfa
xvbap = xvbap
xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD. Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements
We want to create a project to enahance trasnaction VA01
Go to transaction CMOD
Create a project called ZVA01
Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only be used i 1 project. If the enhancement is allready in use, and error message will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155"
Please check if the thread given below would be of any help.
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/menu-exits-72696#
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
Regards
KK

How to extend an IDOC step by step

Howto extend an IDOC step by step
Hello,
Waiting for become a blogger at sdn.sap.com, i post here a HOWTO for IDOC extension.
1)
/nWE31
Here will create the segments for extend our idocs.
Example: 'ZDUMMY'
-> Write a short description and field name.
-> Data element = CHAR1 (will create a new field in the idoc with 1 character extension)
-> Save (developer permissions needed)
2)
/nWE30
-> At development object select 'extension'
-> Write a name for object name (8 char extension). For MATMAS IDOC extension i create ZMATEX01. Click on 'create' button.
-> Now we will select the IDOC link. Select 'create new', and link to a basic type (MATMAS05 in our example). Don't forget to write a description (will be usefull in the future for identificate correspondances).
-> Select IDOC substructure where wich will be extended. Click on header and 'create segment' (you can paste from clipboard with 'insert' button).
-> Select ZDUMMY segment created before.
-> Save and fill package and transport order for this modification.
-> Release segment from toolbar (Utilities)
/nWE82
Add Message Type (MATMAS), Basic Type (MATMAS05), Extension (ZMATEX01) and Release.
Finish
All it's done! So now you can use your new IDOC. For SAP XI, must import again to your integration scenario. Check ZDUMMY field at the segment you have selected.
Best Regards,

This wasn't was an answer

PORT FORWARDING Step by step explanation needed

I need a very easy to follow step-by-step explanation as I can't seem to work this out.
I have broadband with a static IP address, it comes through my ethernet modem (D-Link ADSL Modem DSL-300T) this is connected to my Airport BaseStation (one with the modem port).
I have three computers connected wirelessly, one desktop, and two laptops that are frequently out of the office.
I want to set up my network so that I can use Apple Remote Desktop and FTP. I understand I need to open some ports on the basestation, but don't know exactly how or what ones. Also, do I need to set the macs up with DCHP with a manual address, or can I leave it at just DCHP?
Any help would be greatly appreciated.

Port Forwarding on an apple base station comes under the 'Port Mapping' section of the airport admin setup.
I found a howto that could help you .
http://www.roadstead.com/weblog/Tutorials/airport.html

Step by step procedure to let WebLogic chech signed sopa messages

I want to know the step by step procedure, to set up Bea webLogic8.1 server, in order to let Bea WebLogic8.1 server, check a signed soap messages.
The server
- A webservice, deployed on the venerable Bea WebLogic8.1 is
deployed in a way that it can handle security information.
The client
- A signed soap message, i.e. a soap message with signatures
in it's header.
To be short, no words about the client, that's is already ok. It works, and the client sign the soapmessage.
More important is howto configure the server?
We need private keys and certificates.
For creating the private keys and the certificates we can use: openssl(www.openssl.org) and keytool (Sun). Later more on crating private keys and certificate.
Bea WebLogic8.1 can use so called 'keystores'.
The first step is thus to collect/create private keys and certificates and store these in the keystore(s). Yes keystores, beacause the private keys go in say: my_privatekey_store and the certificates go in say: my_trusted_certificates_store.
The second step is to tell Bea WebLogic8.1 server where these keystores can be found. The keystores must be put in the root directory of your deployed domain. If you domain resides in: /opt/bea/user_projects/domains/my_domain/ then
the keystores must be copied to this directory.
In the console (the webinterface) you navigate to Servers->my_server. In the Configuration you select the Keystore & SSL Tab. There the keystore path and type (JKS) and their passwords must be given.
The third step is to modify the webservice description in the web-services.xml. Most of this you can find in the BEA docs, but some items stay obscure: there can be a section <signatureKey>
<name>digSigKey</name>
<password>digSigKeyPassword</password>
</signatureKey>
Well what the hell does this mean? What is digSigKey? Is it the name of my private key? Well, my private key has NO NAME. It may be stored in a file, which has a name. But when the private key is stored in a keystore than is stored under an ALIAS and NOT under a NAME!!!
As long as it is not clear what is meant with this xml section, it is hopeless to get sign checking working in a Bea WebLogic8.1 server.
If someone like to explain this, it would be of benefit of the users of Bea WebLogic8.1.
But, ok let that be, if this section is filled in with some dummy values, what happens next?
Well, after submitting a signed soap message to Bea WebLogic8.1 server, a SOAP Fault Exception is thrown by the server. Finally this exception arrives at the client and will be displayed their: "SignatureToken invalid".
Why is the configuring of the server not clear and adequately explained in the Bea WebLogic8.1 docs?
I want to setup a good and clear document how to setup a Bea WebLogic8.1 server for checking signed soap messages.
Anyone who wants to assist me in this? You are welcome.
kind regards,
Harry

Hi,
Hussein Sawwan-Oracle, Thanks for your input. Your effort too helped a lot in having this post here, thanks a lot
Anar Godjaev, Thanks brother, for your kind words!!!
Best Regards,
Asif

Can anyone let me know the step by step procedure for creating userexits?

Hi all,
can anyone let me know the step by step procedure for creating user exits? for any transaction code like mm01 or vd01. If you have any docs send it across to my email id : [email protected]
thanxs in advance
hari

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
look in txn CMOD or SMOD, check enhancement 0VRF0001. It uses function module EXIT_SAPL0VRF_001. It is used to manipulate route determination for SD.
Here is the code
 DATA: ls_xvbpa LIKE xvbpa,
 lf_aland LIKE tvst-aland,
 lf_azone LIKE tvst-azone,
 lf_lland LIKE trolz-lland,
 lf_lzone LIKE trolz-lzone,
 ls_vbadr LIKE vbadr,
 ls_xvbap LIKE xvbap,
 ls_tvst LIKE tvst,
 lv_route LIKE trolz-route.
 LOOP AT xvbap INTO ls_xvbap.
 IF NOT ls_xvbap-vstel IS INITIAL.
 SELECT SINGLE * FROM tvst
 INTO ls_tvst
 WHERE vstel EQ ls_xvbap-vstel.
 IF sy-subrc = 0.
 lf_aland = ls_tvst-aland.
 lf_azone = ls_tvst-azone.
 ENDIF.
 ENDIF.
 READ TABLE xvbpa INTO ls_xvbpa WITH KEY vbeln = ls_xvbap-vbeln
 posnr = ls_xvbap-posnr
 parvw = 'Q1'.
 IF sy-subrc = 0.
 CALL FUNCTION 'SD_ADDRESS_GET'
 EXPORTING
 fif_address_number = ls_xvbpa-adrnr
 IMPORTING
 fes_address = ls_vbadr
 EXCEPTIONS
 address_not_found = 1
 address_type_not_exists = 2
 no_person_number = 3
 OTHERS = 4.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ELSE.
 lf_lland = ls_vbadr-land1.
 lf_lzone = ls_vbadr-lzone.
 ENDIF.
 ENDIF.
 CALL FUNCTION 'SD_ROUTE_DETERMINATION'
 EXPORTING
 i_aland = lf_aland
 i_azone = lf_azone
 i_lland = lf_lland
 i_lzone = lf_lzone
 IMPORTING
 e_route = lv_route
 EXCEPTIONS
 no_route_found = 1
 departure_error = 2
 destination_error = 3
 invalid_generic_key = 4
 customer_exit_error = 5
 OTHERS = 6.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ELSE.
 ls_xvbap-route = lv_route.
 MODIFY xvbap FROM ls_xvbap TRANSPORTING route.
 ENDIF.
 ENDLOOP.
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
Reward points
Regards

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.

I have one apple ID for multiple devices in my family. I'd like to keep it that way for itunes/app purchases. I would like a simple step 1, step 2, step 3 response on what I need to do to separate all other features like imessage, contacts, emails, etc.
I have been reasearching how to do this on the internet, but I haven't found an easy explanation yet. My family is going crazy over each others imessages being sent to others in the family and not being able to use FaceTime because of conflicting email addresses. I have read that if each person gets their own iCloud account, this would work. However, I need to know what to do after I set everyone up with their own iCloud account. Do I make that the default email address to be contacted or can they still use their hotmail email addresses. Any help- with easy explanation- would be much appreciated!!

We do this in my family now. We have one account for purchases, so it is used to share music and apps (I think that is in Settings/iTunes & App Stores). Each iDevice has this configured.
Then, each of us has our own iCloud account that is configured under Settings/iCloud. That then allows us to have our own Mail/Contacts/Calendars/Reminders/Safari Bookmarks/Notes/Passbook/Photo Stream/Documents & Data/Find My iPhone/and Backup. That Backup piece is pretty sweet and comes in handly if you replace your iDevice. You can just restore from it.
So we all share the Apple Store account but we all have our own iCloud accounts to keep the rest seperate or things like you mentioned are a nightmare.
In answer to what iCloud does for you: http://www.apple.com/icloud/features/
Think of it as an internet based ("cloud") area for all of those items listed in my response. What you need to remember is photo stream only maintans the last 1000 pictures so don't count it as a complete backup solution for your pictures. Even though I rarely sync with a computer these days, I do still try to sync my phone with iPhoto (I have an iMac) so that I have copies of all of my pictures. 1000 may not stretch as far as it sounds.
Message was edited by: Michael Pardee

Windows 7 x64 on 2009 MB, step-by-step instructions and solutions

ok, after spending days on this with about 10+ clean installs on 2 different machines and searching forums about various problems, i'm going to go step by step in a flow-chart like manner to describe the steps and various pitfalls in getting windows 7 ultimate 64 bit installed correctly on a macbook (late 2009)...most of this i didn't figure out on my own, this is a compilation of solutions found by others. i'll try and link or credit anyone i can, but honestly can't remember where i saw all of this. part of this is to share my days of frustration to try and save someone some time. also, in case i have to do this again, i want a record of it so i don't have to start from scratch next time.
i don't have everything working perfectly, but i have wireless and sound, but not sure if all the drivers are up to date. i'm still working on the headphone issue, i don't have sound yet with headphones, but i got the speakers to work.
i'm going to preface this by saying that windows 7 is a horrible piece of software, i'm only helping a friend do it because she's an architect and needs autocad, but she wants a mac for daily use. also, i'm doing this from a spanish install of windows 7 (here in south america), so it's a pain to translate this cruddy convoluted OS into english as i'm not familiar with windows 7 anyway, so i'll do my best. i'm not a pc expert. also going to say that the windows 7 x86 and x64 installs i've done on a couple macbook pro 15's seems to work much better (full trackpad functionality, expose works) and without as many problems...i don't know why it doesn't seem to work as well in x64 on the macbook, i'm still investigating.
also, i want to say that a fresh (first-time) bootcamp partition with windows install after a clean mac os x install seems to produce the best results. i say this because i wasn't happy with all the hacks in my first couple attemtps, so i erased the bootcamp partitions and re-created them to re-install windows 7 again. but i started experiencing some peculiarities that never happened in the first install after a clean Mac OS X install. it's as if the computer leaves artifacts from previous installs and acts funny. also, reboots and start-up times seem to be slower now than when it was a first-time fresh install. anyway, i'll try and outline all the weirdness here, indicated by asterisks *
SO, HERE GOES:
1) Go to Bootcamp Utility > Create Bootcamp partition
2) Afterwards, this should take you to a restart into the windows install dvd....if install dvd boots fine, skip to step 3
** if you get a gray screen (happened to me after subsequent re-install attempts), you have to power off and reboot holding down "C" key to boot from the dvd...or you can hold down alt/opt key to get the icons of bootable volumes, at this point it should be mac os x and the windows dvd. the point is, force it to boot from the dvd if it hangs on re-start.
3) Windows install should start. Select language, etc....You should then get to a screen listing all the partitions (should be 3 of them). Choose the Bootcamp partition and format (erase) it to proceed with the install.
4) Windows should start installing all the files and will reboot a couple times, here's where things get weird possibly. On the first attempt at installing Windows 7, the install went smoothly on restart.
** some of you might get a blinking cursor and a black screen that goes on forever. Supposedly this is a bug in Windows 7, having to do with video drivers or something. I don't understand because my first install attempt, it rebooted just fine and the installation continued.
anyway, what you have to do here if you get the forever-black screen is power down the machine with the power button and restart holding the alt/option key. this time when you get the bootable volumes on the gray screen, choose the Windows partition, which will now appear. DON'T boot up from the DVD. upon restart into Windows, you should be back in the installation process and it will attempt to finish the install here.
it might be my imagination, but once i had to reboot into the dvd here to actually finish the install. technically Windows is not finished installing at this step, you just have to figure out how to get past the black screen to finish the install. try both.
5) Windows should go back to where it left off before the restart, then finish the install.....and restart AGAIN. On my first attempt, the restart went smoothly and started the "first time user" process...
** some of you will get the black screen YET AGAIN, this happened to me on my subsequent attempts at re-installing Windows. again, you need to power off and start up holding the alt/option key, choose the Windows partition and it should take you to the "first time user configuration" process....since at this point, windows is indeed installed.
6) Here you will fill out all your information, product key, etc...and get into Windows. Here you will have some other problems.
Problem #1: you have no drivers to run Windows on your Mac, so you will need to install Bootcamp in windows from your Mac OS X install dvd
Problem #2: you have no "right click", because you don't have drivers, so you might not be able to eject the Windows dvd to put in the Mac dvd
Solutions: you can't control-click or right click, BUT YOU CAN hover over the DVD drive ( "D:" in your computer, my PC or whatever it's called in english) and see if there's an "eject disc" option.
for some reason, my Windows dvd was spinning and not being recognized, so i just rebooted (alt/option) into Mac OS X and ejected the disc there. the point is, you need to eject the Windows disc and put in the Mac OS X install disc to access Bootcamp for Windows.
7) Reboot into Windows (if you had to boot into Mac to eject the disc). Insert Mac OS X install disc. Navigate to BootCamp setup.exe and run it.
** the first time i did this, it ran no problem. but in subsequent attempts, it gave me the "x64 not supported by this computer" message that everyone seems to encounter. there is a bypass for this outlined here:
http://www.techulous.com/hardware/how-to-apple-boot-camp-64-bit-for-windows-7-on -unsupported-macs.html
8) Ok, so now you should have Bootcamp 3.0 installed. Now you need to update it with Bootcamp 3.1 update. Download it here and run it. This is required for 64 bit support, I believe this is the link:
http://support.apple.com/kb/dl979
** hopefully you don't have problems, i didn't, so you might have to search the forums since i can't anticipate what might happen here, it worked for me every time.
9) Ok, i think it might reboot after the update install. Now you have Bootcamp installed and most of the drivers you need, however not everything works. Some of the drivers will be out of date.
Problem #1: you may or may not have updated nvidia drivers. mine are ok, but check nvidia website if you have doubts. most of their drivers are for PC hardware, however, so the ones on the bootcamp disk and update should be fine.
Problem #2: almost everyone has wi-fi connectivity problems. it has to do with the wrong/outdated broadcom drivers from bootcamp. i will outline how i got it to work (based on someone else's solution i found in some forum or other).
Problem #3: almost everyone is having sound issues. i'll explain what i did. i still have no sound coming out of the headphone jack, i'm working on that next. but i have speaker sound and no red light coming out of the headphone jack.
** first of all, you should probably download firefox from internet explorer in windows, then update adobe flash, it's a pain....i used another computer to download the drivers, then transfered them by USB drive, but you can do it however u want.
Solution to wi-fi: ok, not sure where i got this information, but i downloaded HP drivers in a file called "sp45524.exe"....here's the link:
http://www.wireless-driver.com/download/hp/hp-broadcom-wireless-lan-windows7-dri ver-v560188.htm
apparently the broadcom drivers in Bootcamp 3.0 and 3.1 update won't install on Windows 7 x64 for some reason, lot of people are getting "code 10".
what i did is this:
9a) run the .exe file, it will create a folder called SWSetup\SP45524 that will house the drivers. there's a setup file in that folder, i didn't try it. perhaps it will install from there, but everything i read suggested a different step. ** if you run the set up file, you may have to run as administrator, or use the "troubleshoot compatibility" trick to get it to work.
9b) Go to Control Panel > Hardware and Sound > Device Manager > Network adapters
you should uninstall or deactivate any drivers you have. if it's not showing any wi-fi adapter, right click and "check for new hardware" (not sure how it's translated into english from spanish)....you should have an unknown device pop up with the yellow icon and exclamation mark. double click on that, assign it as a network adapter.
when you get to the driver tabs, you can install it from there. this is where it gets tricky. click "install driver", "check drivers on this computer", "choose from a list of drivers on this computer", "use disc", and in the dialogue box ("install from disc" that says "copy manufacturers files from", navigate to the C: SWSetup|SP45524 folder and click until you can accept. this will load up a different list of drivers.
(sorry, i'm translating the Windows from spanish to english, and i'm not familiar with exactly what they say in english, so you'll just have to use your imagination)
you should now have a small list of drivers. personally, i chose the first one on the list "Wi-Fi adapter Broadcom 43224AG 802.11a/b/g/draft-n", but the second one worked also. again, i'm doing this on a late 2009 white macbook (6.1) and it works. according to the date of the driver, it seems like it might not even be the most current and might be older than the one that's on the MAC OS X install disc, but none of the ones on the disc work. this one does. (thanks to whoever found this out, i can't find the original link of the post with this driver reference).
Solutions to sound: ok, there are multiple posts on this, everything from updating realtek to sigmatel...personally what worked for me was to download the most current Cirrus Logic drivers.
everyone has been pointing to this post:
http://www.stuffedcow.net/macbook_audio
it doesn't really tell you what to do exactly. i'm not even sure what to do, but here's what i did. actually, i downloaded what was supposed to be the CS4207 driver here:
http://www.cirrus.com/en/products/pro/detail/P1233.html
then i followed the same procedure as before with the network adapter driver...."install driver", "check drivers on this computer", "choose from a list of drivers on this computer", "use disc", and in the dialogue box ("install from disc" that says "copy manufacturers files from", navigate to the folder you just downloaded from the above link.
you should have an updated list of drivers. what i don't understand is that the Cirrus site lists the most current driver as CS4207, but the only thing that has 4207 in it starts with CDB. in any case, i chose the last one on the list, CS4206A (AB 99).
i have no idea why i chose that, it just seemed to be the most current. in any case, sound works now.
Ok, i tested all this stuff in skype. wifi, microphone and speakers work, isight works. however, still no headphone sound. so if anyone knows how to fix that, please let me know. i haven't gotten to that part yet. but i've spent like over a week trying to figure this out. windows 7 is so horrible that there seems to be so many steps to getting it just right, and i just found myself starting all over (i didn't mention the nightmare with license breaks with AutoCad due to windows reading the clock differently...that's another hack that i had to deal with...and failure meant re-installing everything).
ok, off to bed now....

Windows 7 x64 all updates
Just doublechecking. Does that include the recent chkdsk hotfixes?
[The Chkdsk.exe program does not start correctly on a Windows 7-based computer|http://support.microsoft.com/kb/975778]

I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have. Can I uninstall it and go back to an older version that would have screen recording? If so, how? Step by step needed. Thank you for your time.

I have quicktime pro and it does NOT have the screen record mode that Quicktime is suppose to have. Can I uninstall it and go back to an older version that would have screen recording? If so, how? Step by step needed. Thank you for your time.

Did you remove Quicktime X?
On a normal install Quicktime 7 is installed in the Utilities folder and Quicktime Pro in the main Applications folder.
You will need to reinstall OS X to get Quicktime X back if you have deleted it.
I notice yor profile says 10.5.8. Quicktime X is only available on 10.6 and above.

How to migrate from exchange 2007 to 2013 step by step tutorials please

Hi
I am running Windows Server 2008 standard, with exchange 2007 SP2 on it.
We have 800 mailbox in total
Our domain controllers are
Win2012 R2 and I would like to upgrade to Exchange 2013 on Windows server 2012 R2.
I am running a VM, on VMware environment, so my Windows 2012 R2 is a VM.
Is there a website or document that explains in detail, step by step how to upgrade from 2007 to 2013.
I currently only have 1 exchange server 2007, with all the roles on the one server. I would like to keep that same as
well with exchange 2013.
Thanks

Exchange server deployment assistant is always a good service provider to achieve this task as it simply ask few questions about your current environment and proceed further accordingly.
You can refer to this blog explained by technet team that will assist you further to gather more information in depth : http://blogs.technet.com/b/meamcs/archive/2013/07/25/part-1-step-by-step-exchange-2007-to-2013-migration.aspx
Moreover, to avoid the interruptions and proceed a hassle-free migration from exchange 2007 to 2013, this application (http://www.exchangemigrationtool.com/) could also be a good approach to accomplish
migration task in more secure way.

Step by step complete setup for WRT54G ver.6 with Laptop and XBOX 360

Hello. I am sorry to post this, I am sure it is a juevenile and redundent question...but I have tried to look for the set up cd (I can find where to download it...though I can find the firmware upgrade or whatever). My friend at work said it would do all the setup pretty much automatically for me.
I somewhat know computers, but you might go ahead and make your replies VERY lamen's terms or I might not be able to follow. Anyways, what I need, is a step by step/screen by screen directions for a secure network. I have made a partial attempt at setting it up and it technically works, but I would feel better if I did the steps a-z in order, so I know that it is done correctly. I also am not totally confident in its security as it is now. (Also, technically, I did not check the XBOX again after getting the new laptop, I am just assuming it is still working because it was before).
My problem is I can't seem to find very good directions for setting up the router...I only find partials or confusing directions.
So here are the things I am trying to connect:
Liksys WRT54G ver. 6
Gateway Laptop running Windows Vista
XBOX 360 - WIRED
(I had a PC and a laptop, but they both died at the same time and I have only been able to replace the laptop at this point...the PC will come later and not sure at this point if it will be Wired or not).
I have a cable Modem between the Router and the wall...I didn't look at that for brand/etc...but I can get it ASAP if needed.
Here are the settings that I have so far:
Changed the Router Name
Changed the SSID
Have DHCP set to 3 (XBOX, PC, Laptop)
Wireless SSID Broadcast: Disable
Username and Password changed to my own info
UPnP: Enable
I may have changed other things without knowing it. So like I said, a complete, step by step screen by screen set up would be totally appreciated. I haven't done anything in the security tab, all that is totally foreign to me, so I am just not broadcasting for now until I can get some help setting things up with you guys.
And if someone is familiar with the Laptop/XBOX 360 setup, and I need to change any of the settings on the XBOX itself, could you please include that in your directions? I know that isn't technically what THIS forum is for, but it would sure be helpful to me if you happen to know both parts anyways.
Thanks a lot (in advance)!

So all you just need to do is, secure your Wireless Network. Follow the setps bellow and change the settings on your Router.
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Wireless channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WPA, For Encryption, select TKIP...For Passphrase input your desired WPA Key. For example , MySecretKey , This will serve as your network key whenever you connect to your wireless network. Do NOT give this key to anyone and remember the key.
NOTE : Passphrase should be more that 8 characters...
Now see if you can locate your Wireless Network and attempt to connect...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
Now see if you can locate your Wireless Network and attempt to connect...

Step by Step Guide Details for RFC to File and File to RFC scenario

Hi Guru's
Good day to you. I am tyring to develop some scenarios based on RFC adaptor. so i want to start up with basic scenarios like RFC to File scenario(Here i just want to pull some data from SAP using RFC and put it in destination folder as an text file) and FILE to RFC scenario (Here i just want to take some data from the file and update into SAP).
For doing these scenarios i would like to request you people to send me the step by step guide which explains me about the complete steps of configurations required to do the RFC to FILE scenario and FILE to RFC scenario.
I found some scenarios and i am in confused state. so i request you to please put your experience to help me out.
thanks in advance.
Regards
Raj

Hi Aaron,
I don't know your scenario and your ECC and PI versions but I learned how to use ABAP Proxy more than 1 year ago with the following tutorial:
Edit--> The forum doesn't allow me to post external link, just search "ABAP Proxy Communication Scenario" in google and visit the 1st result
The way to develop ABAP Proxys has changed a little if your PI is 7.1. In the ECC side, the transaction SPROXY looks much better too if you have a recent version of the ECC.
Edited by: Marshal on Oct 8, 2009 5:08 PM
I've found that SDN Document. Maybe the scenario is not the most simple to start with ABAP Proxy but is very well documented and is for PI 7.1. The document also handles the inbound and outbound proxys
[http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/c00ca32e-f991-2b10-f5be-97114bd2b08f&overridelayout=true]
Edited by: Marshal on Oct 8, 2009 5:22 PM

Step By Step Instructions !!!! HELP NEW USER!

Step by step tutorial on how to create a project from A to Z. I am a new user, and i am tired of all the tutorials NI provides, they all talk about creating some bullshit waveform or making some easy calculator vi. They never talk about the real stuff, example, how to start a project, create your vi, compiling or putting together all the vi's, compile everything together and than creating an EXE. Holly shit that's all i am asking for is an idiots guide is it that hard for NI to make ! Can anyone out there direct to something to figure this out maybe a book, article, web page something!!! And no thank you i don't need some sales guy calling me trying to sell NIN bullshit training classes, i have been to them and all the instructor could talk about is creating a ridicolous sine wave genarator (WoW)

I am sure NI would be very happy to hear about any issues with the LabVIEW help that could be confusing to new users.
Here's a link to the LabVIEW help on organizing an managing projects:
http://zone.ni.com/reference/en-XX/help/371361D-01/TOC16.htm
Have you read it and do you still have problems? What was not clear?
Genci wrote:
..., compile everything together and than creating an EXE.
How to built an application Step by step.: http://zone.ni.com/devzone/cda/tut/p/id/3303
You should also be aware that you cannot buit an application using LabVIEW base or full.
You need LabVIEW professional or you need to purchase the application builder.
Genci wrote:
...tired .. bullshit ... Holly shit ...idiots ...bullshit ..ridicolous ...
These are all non-techical terms and not very descriptive in the context of LabVIEW. Could you be a bit more specific on what kind of problems you encountered?
It would also be important to know your programming background? Are you experienced in any other programming environment? Is labVIEW your first attempt at programming? Are you familiar with general programming terms? Are you trying to program for personal enjoyment, for school, or as part of a job. If your employer forces you to switch to LabVIEW, maybe he could send you to some NI classes.
What is your LabVIEW version?
As anything, there is always an initial hurdle that needs to be overcome before becoming familiar in a new environment. Fortunately, this threshold is very low in the case of LabVIEW and you should be up and running after a couple of hours. Mastery takes a bit longer, of course.
Your best bet is to ask a more specific question here in the forum whenever you get stuck. Good luck and enjoy the ride.
LabVIEW Champion . Do more with less code and in less time .

Step by Step guide for upload iPad only apps

Please note that this is not derived from me alone.
This Knowledge is derived from three forum members, DutyFarm, ChoosingNameCanBeSoXXX & Dei_Machiavelli.
I just add the solution for generate the .xcent file.
[Atleast enough for me to make it work.]
Welcome that if anyone find that this step by step guide not detail enough, you can copy and add more points and post again.
Step 1:
Make sure that all the Icons for the iPad are accounted for because if you don't, Application Loader will Scream
[For some strange reason, you have to add the Old iPhone Icon Size as well]:
 Old iPhone: 57 by 57 [Icon]
 Start Up Icon for iPad: 72 by 72 [Icon-iPad.png].
SpotLight Search for iPad Must Have: 48 by 48 [Icon-iPad-spot.png]
Step 2:
Load the Mac, unzip your *.ipa file, place the *.app file on your desktop and modify its internal Info.plist file.
Change 3.0 to 3.2 here:
<key>MinimumOSVersion</key>
<string>3.2</string>
Step 3:
Because after you change the Info.plist file by your own way, the file will changed to wrong codesign.
So that will need this step to change it back to right codesign which can success upload to apple store.
Create this weird NameOfYourApp.xcent file on your desktop:
That strange 10 digit is the App ID:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
 <key>application-identifier</key>
 <string>APP_ID_Letters_&_NUMBER_HERE.com.whatever.YourAppName</string >
 <key>get-task-allow</key>
 <true/>
</dict>
</plist>
Step 4:
Now Type this in Terminal:
/usr/bin/codesign -f -s "iPhone Distribution: Yours Distribution Cert Name" "--resource-rules=/Users/ABC/Desktop/YourAppName.app/ResourceRules.pl ist" --entitlements "/Users/ABC/Desktop/YourAppName.xcent" "/Users/ABC/Desktop/YourAppName.app"
iPhone Distribution: Yours Distribution Cert Name << This you can check back at your Cert in Keychain.
/Users/ABC/Desktop/ : here is assume that your username in you Mac OS is ABC. But more easily, you can put all the file at any path you want.
I just put all files at the iPad folder at system disk root. so that the path just /iPad/ .
OK, if no error come out, congrats that you are done. You can upload the app by Application Loader. (Assume that you know what is it, and need to zip you .ipa before upload)
BUT, LIKE ME and some member here, we see two error after the Step 4 command as below:
/Users/kevs/Desktop/MyApp.xcent: unrecognized blob type (accepting blindly)
/Users/kevs/Desktop/MyApp.xcent: invalid length in entitlement blob
After few night try..... finally I found out the solution and just successfully submit the iPad App!!!
The main problem was we used a wrong method to create that stupid MyApp.xcent file!!!!
I used many many method, use Mac text editor, Window notepad, Mac/ Window Dreamweaver as .xml......
but all facing the strange "invalid length in entitlement blob"
why invalid length?!?! so I try to search for what is .xcent..... finally I found the following webpage
http://www.246tnt.com/iPhone/
it's talk about codesign and entitlement files.
then..... I FOUND .xcent NOT ONLY A SAMLPE TEXT FILE!!!!!
in the middle of the link above, there are a highlighted simple script , which is a python script to help us generate a .xcent entitlement file!!!!!
Here is step by step solution to solve this error:
1) just download the .py file here: simple script
2) put the .py file anywhere you like, or just simply put in the root of you mac
3) turn on the Terminal (in /Applications/Utilities), goto the folder where you put the .py
4) TYPE: python gen_entitlements.py 5C297XXXXX.com.yourdomain.MyApp myApp.xcent
 Where 5C297XXXXX.com.yourdomain.MyApp is your AppID with BundleID,
 myApp.xcent is the file will be generate to you
5) Finally you can see the .xcent which make me nearly crazy for a week!!!!!!!!
6) Use this .xcent file to run that codesign script (Step 4 above)
7) Congratulation the codesign changed and you can zip your app and upload it
I have spent many hours for this simple stuff.........so sad........>.<
Hope this post can help all guys who still mad on this error when trying to upload a iPad only apps.
Good luck!!

I think I followed everything very closely, but I am getting these errors when trying to run the codesign script
here is my script command:
/usr/bin/codesign -f -s "iPhone Distribution: Nethercottage Games, LLC" "--resource-rules=/Users/BATC/Desktop/book1.app/ResourceRules.plist" --entitlements "/Users/BATC/Desktop/book1.xcent" "/Users/BATC/Desktop/book1.app"
Here is the error I get:
/Users/BATC/Desktop/book1.app: replacing invalid existing signature
codesign_allocate: object: /Users/BATC/Desktop/book1.app/book1 malformed object (unknown load command 9)
/Users/BATC/Desktop/book1.app: object file format invalid or unsuitable
Any help on this please?

HOWTO: accountActivation -step 1, step 2

Similar Messages

Maybe you are looking for