Howto change or delete TEST_ARCHIVE_STORE in XMLDAS

Hi Experts,
we configured the archiving in the Adapter Engine of SAP XI 7.0 and used (for testing purposes) the Filesystem TESTARCHIVE_STORE
Now we want to use a WEBDAV System but unfortunatly we cannot reasign / unasign the TESTARCHIVE_STORE to WEBDAV.
In SAP Help I've found:
However, changes are only possible if you have not archived any data yet under the collection for which you want to change the archive store assignment.
But I don't believe that this isn't possible! What if I change a Archive System in future. It must be posible to migrate.
Thank's for your help!
Christian

Moreover, here are another two posts (Post A &
Post B) for reference. Hope helps.
Noya Lau
TechNet Community Support

Similar Messages

  • I am unable to change or delete my iCloud ID, it is prompting sign in using an old email address that used to be my Apple ID, others have had this same problem but the answer seems to be to delete the iCloud account but I can't do that.

    I am unable to change or delete my iCloud ID, it is prompting sign in using an old email address that used to be my Apple ID, others have had this same problem but the answer seems to be to delete the iCloud account but I can't do that, because when I select delete account it prompts me to sign in on the old email address which doesn't exist anymore!! Please help!

    Welcome to the Apple community.
    This feature has been introduced to make stolen phones useless to those that have stolen them.
    However it can also arise when the user has changed their Apple ID details with Apple and not made the same changes to their iCloud account/Find My Phone on their device before upgrading to iOS 7.
    The only solution is to change your Apple ID back to its previous state with Apple at My Apple ID, verify the changes, enter the password as requested on your device and then turn off "find my phone".
    You should then change your Apple ID back to its current state, verify it once again, delete the iCloud account from your device and then log back in using your current Apple ID. Finally, turn "find my phone" back on once again.
    This article provides more information about Activation Lock.

  • My email recently changed and so I updated my Apple ID to reflect my new email, but my Icloud account still shows the old email as the username on both my Iphone and Ipad and for the life of me I can't figure out how to change or delete it.

    My email recently changed and so I updated my Apple ID to reflect my new email, but my Icloud account still shows the old email as the username on both my Iphone and Ipad and for the life of me I can't figure out how to change or delete it.  My password doesn't work with the old email address.  When I look for my old email address in the Apple ID support area it says that the ID doesn't exist.  Help!!!

    You have to go to Settings>iCloud and tap Delete Account, then sign back in with your updated credentials.  This deletes the account and your synced data from your device, but not from iCloud.  Provided you are signing back into the same account and not changing to a different account, your data will be synced back to your device when you sign back in.

  • HOWTO: Hide the delete button in a NavigatorBar

    HOWTO: Hide the delete button in a NavigatorBar (JSP)
    Goal: Hide the delete button in a NavigatorBar or JSNavigatorBar Data Web Bean. This example works for either bean.
    Solution: Edit the .jsp file containing your NavigatorBar bean. For a generated BC4J JSP application, the file is YourView_Top.jsp.
    Find the code that instantiates the NavigatorBar. It will look something like:
    <jsp:useBean class="oracle.jbo.html.databeans.NavigatorBar" id="tb" scope="request">
    <%
    tb.initialize(pageContext, "MyProject1_bizcomp_BizcompModule.MyView");At this point, add the following line of code to hide the delete button:
    tb.getButton(tb.NAVIGATE_DELETE).setButtonVisible(false);You can find the variable names for the other navigator buttons in the javadoc for oracle.jbo.html.databeans.BaseNavigatorBar. In the online help, this is under Reference -> Business Components Reference.
    null

    Georges,
    This has come up before, and after some experimentation, there's not a straightforward way to do it.
    There are two possible solutions that I can think of:
    1. Write your own custom bean and/or extend the beans provided to modify them to your needs.
    2. Wait for the 3.2 release at the end of the month. This release provides custom data tags with much finer grained control over specific items such as the buttons.
    I think 2 is preferable, if you have the time to wait.

  • Insert ,Change and Delete  records  in OO ALV

    Hi All,
    This is regarding the functionlaties  Insert ,Change and Delete records  in OO ALV ,
    I have gone through the threads posted here and checked the standard  program BCALV_EDIT_04,
    but still I am not able to capture the Deleted and Inserted records,
    as  I am new to OO ALV,can some one help me out pls.
    Thanks and regrds,
    Sree.

    Hi Sree,
    A lot of material is available on SDN.
    Please see this link. This link contains good example of insertr, delete records in OOPS ALV.
    [OOPS ALV.|Re: Insert ,Delete & Add a row in ALV;
    May it helps you.
    Regards.
    DS.

  • Disabling 'Change' and 'Delete' button in Attachment List in ME52N

    Hi Friends,
    The reuqirement is this:
    A user attaches doucments  ( using the Generic Object Services to attach document ) while creating/changing Purchase Requisition (ME51N / ME52N).
    Now when any user goes to see the docuemnts attached to the PR, he selects the 'Attachement List' from the context menu, he should only be able to read it and should not be allowed to change or delete the document. For this we need to disable the 'change' and 'delete' buttons from the toolbar.
    Awaiting your response.......
    Regards,
    Fawaz

    Hi,
    Probably you have uncommented the call to super class when you reimplement the method on child class (z class)
    I just implement the same thing now and it worked for me. Take a look:
    1 - Modify the SGOSATTR table by SM30, just write a Z class (in my case CL_GOS_SRV_ATTACHMENT_CREATE) .
    2 - Create/inheridt a subclass (not a copy) in SE24 of the standard class.
    3 - Implement the method CHECK_STATUS in the z class. Note that the call to method on super class came commented. You only uncomment if you want to also execute a standard code in the super class.
    Here is my code:
    method CHECK_STATUS.
    NOTE - In my real implementation I have uncommented the code below because I want do standard code be executed before my own check.
    *CALL METHOD SUPER->CHECK_STATUS
    EXPORTING
       IS_LPORB  = IS_LPORB
       IS_OBJECT = IS_OBJECT
    IMPORTING
       EP_STATUS = EP_STATUS
       EP_ICON   = EP_ICON
      Check for BUS2012 = Bussinnes Object for Purchase Order
      IF IS_LPORB.TYPEID = BUS2012
      Check authorization and disable create attachment item if the user does not have authority...
    IF IS_LPORB-TYPEID = 'BUS2012'.
    AUTHORITY-CHECK OBJECT 'Z_MM001' ID 'ACTVT' FIELD '01'.
      IF sy-subrc <> 0.
        ep_status = mp_status_inactive.
      ENDIF.
    ENDIF.
    endmethod.
    Regards,
    Alexandre

  • Disabling 'Change' and 'Delete' buttons in Attachment List in ME52N

    Hi Friends,
    The reuqirement is this:
    A user attaches doucments ( using the Generic Object Services to attach document ) while creating/changing Purchase Requisition (ME51N / ME52N).
    Now when any user goes to see the docuemnts attached to the PR, he selects the 'Attachement List' from the context menu, he should only be able to read it and should not be allowed to change or delete the document. For this we need to disable the 'change' and 'delete' buttons from the toolbar.
    Awaiting your response.......
    Regards,
    Fawaz

    Hi,
    I have solved the issue Alhamdulillah by the foll. method:
    1. Copied CL_GOS_SRV_ATTACHMENT_LIST to ZCL_GOS_SRV_ATTACHMENT_LIST
    2. In ZCL_GOS_SRV_ATTACHMENT_LIST there is a method called: CHECK_STATUS. I overwrote with my check;
    on_mode_changed( 'D' ). --- For display
    on_mode_changed( 'E' ). --- For edit mode.
    3. In SGOS tcode, added VIEW_ATTA to point to ZCL_GOS_SRV_ATTACHMENT_LIST
    Regards,
    Fawaz

  • PO Release Strategy not changed after deletion of few line items with less

    Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
    Dear Friends
    We have issue with PO Release strategy. We have created the PO. with release strategy  with multiple approvers.  After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong. 
    Details of the PO
    PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
    PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
    Are there any OSS notes available to correct his bug.
    Please let me know if you need more details
    Thanks in Advance
    Thanks
    MVS

    Hi,
    release indicators  change it to 4.It may works. Please explore to all 6 indicators..........
    i.e,
    1-cannot be changed
    2-changable,no new determination of strategy
    3-changable,new release in case of strategy
    4-changable,new release in case of strategy or value change
    5-changable,new release if new strategy/outputted
    6-changable,new release if new strategy or value changed/ outputted......
    And check   Characteristic description and value in Classification  of Release strategies ........
    I hope this will help you. Thanking you.
    Regards,
    Venkat.

  • FBE2: BAPI or FM for Changing and Deleting Payment Advice

    Hi,
    I am looking for BAPI or FM for changing & deleting payment advice as we can accomplish from FBE2.
    This is EC 6.0 upgrade issue for not be able to post using CALL TRANSACTION in background mode.
    I tried the below FM's in the Function group  FARMATCH, but all have them have the follwing code to select payment advice Header Table [AVIK].  
    SELECT * FROM AVIK INTO TABLE LT_AVIK WHERE (LT_WHERE) AND
                                                  AVSID LIKE '09%'.    "This is not the case for my requirement
    FARMATCH_CHANGE_PAYMENT_ADVICE               
    FARMATCH_DELETE_PAYMENT_ADVICE               
    I found another set of FM's  REMADV_CHANGE  &  REMADV_DELETE but I am not sure if i can
    achieve the same functionality of change and delete that we can do using FBE2.
    If anyone had similar scenario, Appreicate your feedback.

    Below is a sample code.
    I am able to delete the details....
    Take a look...:)...imp to add wait for few seconds
    REPORT z.
    PARAMETER: vbeln TYPE vbak-vbeln.
    PARAMETERS: fplnr TYPE fplnr.
    DATA: t_zfpla TYPE STANDARD TABLE OF fplavb WITH HEADER LINE.
    DATA: t_zfplt TYPE STANDARD TABLE OF fpltvb WITH HEADER LINE.
    DATA: t_fpla_new TYPE STANDARD TABLE OF fplavb WITH HEADER LINE.
    DATA: t_fpla_old TYPE STANDARD TABLE OF fplavb WITH HEADER LINE.
    DATA: t_fplt_new TYPE STANDARD TABLE OF fpltvb WITH HEADER LINE.
    DATA: t_fplt_old TYPE STANDARD TABLE OF fpltvb WITH HEADER LINE.
    *DATA fplnr TYPE fplnr.
    IF NOT vbeln IS INITIAL.
      SELECT SINGLE rplnr INTO fplnr FROM vbak WHERE vbeln = vbeln.
    ENDIF.
    CALL FUNCTION 'BILLING_SCHEDULE_READ'
      EXPORTING
        fplnr = fplnr
      TABLES
        zfpla = t_zfpla
        zfplt = t_zfplt.
    LOOP AT t_zfpla.
      MOVE-CORRESPONDING t_zfpla TO t_fpla_old.
      t_fpla_old-updkz = 'D'.
      APPEND t_fpla_old.
    ENDLOOP.
    LOOP AT t_zfplt.
      MOVE-CORRESPONDING t_zfplt TO t_fplt_old.
      t_fplt_old-updkz = 'D'.
      APPEND t_fplt_old.
    ENDLOOP.
    BREAK-POINT.
    *CALL FUNCTION 'BILLING_SCHEDULE_SAVE'
    TABLES
       fpla_new = t_fpla_new
       fpla_old = t_fpla_old
       fplt_new = t_fplt_new
       fplt_old = t_fplt_old.
    DATA fpltr TYPE fpltr.
    CALL FUNCTION 'BILLING_SCHEDULE_MAINTAIN'
      EXPORTING
      I_FPLA           =
      I_FPLT           =
       i_upd_fpla       = 'X'
       i_upd_fplt       = 'X'
        i_fplnr          = fplnr
    IMPORTING
      E_DATALOSS       =
      E_UPD_FPLA       =
      E_UPD_FPLT       =
       e_fplnr          = fplnr
       e_fpltr          = fpltr
    TABLES
        fpla_new = t_fpla_new
        fpla_old = t_fpla_old
        fplt_new = t_fplt_new
        fplt_old = t_fplt_old.
    WAIT UP TO 2 SECONDS.

  • How do I change or delete album art?

    I put the wrong album jpg in the iTunes library for a song and want to change or delete it. How can I do this?
    iMac G5   Mac OS X (10.4.6)  

    I put the wrong album jpg in the iTunes library for a
    song and want to change or delete it. How can I do
    this?
    iMac G5   Mac
    OS X (10.4.6)  
    You might want to try iTunify
    http://mistatree.org/Shareware/iTunify/index.html
    Features:
    Find duplicate tracks
    Find & Replace in ID3 tags with support for Regular Expressions
    Change the case of ID3 tags (upper, lower, word, sentence)
    Exchange ID3 tags
    Import & Export artwork with advanced options
    Import & Export ID3 tags with advanced options
    Toggle bookmarkability of AAC tracks
    Remove dead tracks from library
    Remove checked tracks from library
    Remove unchecked tracks from library
    Invert Check Marks
    iBook G4   Mac OS X (10.4.6)  

  • I want to change or delete Username.

    I want to change or delete Username.

    Those names will not be changed or deleted unless there is some sort of security issue.
    If you do not want to use it, simply make a new one. The old name will fade to the archives.
    Barry

  • Function Module to Create or Change or Delete

    Hi Friends,
       Is there any function module to create or change or delete the business partners, there is a possiblity to do with CRMXIF_PARTNER_SAVE, but we are having some issue while calling in ISA applications.
    So please let me know is  there any possibility to get the functionality.
        We need to create the BP with all the details means central data, address data and communication data as well as some sales area data.
    Please share the helpful suggestions.
    Thanks,
    Bhaskar

    Try following Functions:
    BAPI_BUPA_FS_CREATE_FROM_DATA2
    BAPI_BUPA_CENTRAL_CHANGE
    or combination of both these FMs.
    Good Luck.

  • Issue with member move, change or delete from Planning web application

    Hi
    We need to make some basic editing (move, change or delete) of level 0 members of the cost center dimension from Planning web application instead of from essbase database outline. But everytime, we tried from the web Admininstration/Dimension drill down and did a Cut or Delete of a base member, the screen either becomes blank or hangs. And we would have to stop and restart the Planning web application server to bring it back.
    Is this a bug or is there something we missed? We are using Planning 4.0.1 and essbase 7.1.1. Any advice on workaround is greatly appreciated. Thanks.

    Hi,
    Have you tried running the planning server in the foreground from the start menu and check the output to see if there are any issues.
    Also it might be worth trying to increase the java heap size, maybe you have a complex hierarchy and this is causing the heap size to max out.
    Have you tried using another method to make changes to the hierarchy such as HAL ?
    Cheers
    John

  • Changing or deleting the user name administrator folder in Mac OS X system preferences

    Hello!
    Does changing or deleting the user name administrator folder in Mac OS X system preferences affects my Creative Cloud license?
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    [If you are posting using email, please turn your 'sig file' function OFF for posting]

    Moving this discussion to the Creative Cloud Download & Install forum.
    Rodrigolima74 at minimum it is likely you will need to sign back in after changing the name.  I have not personally tested the behavior so please feel free to update this discussion after you have made the change.

  • Bapi or FM to create,change and delete Contact persons for vendors

    Dear Experts,
    We are replicating the Contact persons details from SUS(SRM) to ECC, When a Contact person is create,changed or deleted the data should be replicated in ECC. We are doing custom development to do this, I need to know is there any function module or Bapi which I can use to create , change or delete the contacts persons for a vendor.
    I tried using BAPI_ADDRESSCONTPART_CHANGE, BAPI_ADDRESSORG_SAVEREPLICA for changing but its doesn't covers few fields like time zone etc. For deletion I tried  WY_KNVK_SINGLE_DEL_FROM_BUFFER its too not helping me .
    Please let me know is there any bapi or fm to do these process or we can go for BDC.
    Thanks & regards,
    Santhosh.R

    Hi Santosh,
    Can you please tell me what Business Scenario is asking you to consider the Time Zones .
    If you know the Customer Number you can very well get the country and there are various FM's to get the time zone based on a country .
    Now Call the FM (as wrote by you ) based on the TIme Zone condition,
    Please enlighten me if i am incorrect.
    Thanks
    Sri

Maybe you are looking for