Howto change the Sender/Reply-to address and name in the broadcaster
Hello,
When I create a broadcast setting; the username and email address of the creator are used for the broadcaster.
Now I created a group account for broadcasting the reports. However, I don't want the recreate the broadcastings again, but only change the return address/name and/or the sender.
Regards,
Ernst
>
Suzanne Gravelle wrote:
But what I am trying to change is the 'from' that shows in the e-mail. I believe that is controlled by the 'owner' and not the authorization user.
correct
>
Suzanne Gravelle wrote:
So, I have to change the RSRD_SETTING. I can't go in and change a line though, the change option is not available (it was available for table RSRD_SETT_NODE_A. Should that option be active?
SAP doesn't like you to "change" table entries just like that (and that's pretty obvious too), so it's normal that the "change option" is not available. That doesn't mean you cannot change the entry though... question is just why would you change it? Especially the "owner"? Anyways, in a program you can change the table entries using the correct commands. If you have a clear logic & cannot do it any other way, than that's the way to go forward.
Similar Messages
-
Currently when I receive an email, I have the option of adding that address to my address book. However, I use groups quite a bit and I want to add the sender's address to a group, without having to later find it in my address book and moving it to a group.
Can this be done?
BudI moved the file formhistory.sqlite to another file folder. I then started Firefox up again to see if it worked or if I needed to start it in Safe Mode. No need for Safe Mode. It now works exactly as it should. Thank you so much!!
-
Hello everybody
I'm with a doubt.
I got in the business
environment Project Server 2010 and
would like to get the publication date,modification
date and name
of the person who made
the last change in
the project. It is possible
to doby the native
resources or is
there any query in
SQL Server to perform a
query of this information.
Thank you.
Obrigado por contactar o fórum Microsoft Technet!Hi Hezequias,
You can get the ProjectModifiedDate column in MSP_EPMProject_userView in the Reporting DB where you can
get the data based on the projectUID.
The "last saved" date in the draft DB (be aware that querying in the draft DB is not supported by MS).
For the "last modified by", I think it is not stored in any place.
But you can develop custom code upon publishing the project (Event BeforePublish), writing the current
date and username automatically into a custom enterprise field.
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS | -
attemped instructions in Mountain Lion to change my e mail address to the recommended i cloud.com address.
The drop down in the SEND NEW MESSAGES FROM does not have the i cloud e mail option.
How do I change it??Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
When you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again. -
My iPad, Macbook and Apple TV are all set up with the same iCloud email address. I bought the iPhone 6 and accidentally set the iCloud up with a different email. My phone will not let me change the email address to be the same as my other devices, it tells me that email is already being used. How do I delete the iPhones iCloud account and reinstall it to match my other devices.
Yes it will, just sign out, then sign back in with the correct address.
Settings>iCloud>Sign Out. -
How do I send an email with a group address and not show the addresses/names of the recipients?
Use BCC. That's blind carbon copy. And copy paste the address into the BCC field. It really depends what e-mail program you use how to enable BCC.
-
I changed my apple ID email address, and now I can't access my iCloud because it was listed with the previous email address. What can I do?
If the old ID ("email address") is an earlier version of your current ID, go to https://appleid.apple.com, click Manage my Apple ID and sign in with your current iCloud ID. Click edit next to the primary email account, change it back to your old email address and save the change. Then edit the name of the account to change it back to your old email address. You can now use your current password to turn off Find My iDevice, even though it prompts you for the password for your old account ID. Then save any photo stream photos that you wish to keep to your camera roll. When finished go to Settings>iCloud, tap Delete Account and choose Delete from My iDevice when prompted (your iCloud data will still be in iCloud). Next, go back to https://appleid.apple.com and change your primary email address and iCloud ID name back to the way it was. Now you can go to Settings>iCloud and sign in with your current iCloud ID and password.
-
I accidentally deleted the Trash Icon next to the Send/ Reply Icon in Mail and I'm using Lion 10.7.5.
Does anyone know how to retrieve it?Luigi
That worked, I knew it was something simple.
Mille Grazie!!!
Michael -
i have put in the smtp address and its rejecting the address, my i pad will receive but not send
iOS: Unable to send or receive email
http://support.apple.com/kb/TS3899
Can’t Send Emails on iPad – Troubleshooting Steps
http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
Setting up and troubleshooting Mail
http://www.apple.com/support/ipad/assistant/mail/
iPad Mail
http://www.apple.com/support/ipad/mail/
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.
Or this - Delete the account in Mail and then set it up again.
Cheers, Tom -
I recently changed my iTunes identity (email address) and password using my iMac on System 10.10.2, but my iPhone and iPad still ask for the old one. How do I switch them over?
Refer to Apple ID: What to do after you change your Apple ID - Apple Support
-
When I send a group txt and one of the reciepients replies it creates a new message. How do I keep all the replies in the same message?
If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
This one will create the form, database and send out the emails...
http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
"I may receive some form of compensation, financial or otherwise, from my recommendation or link." -
The server rejected the sender's email address.
The message could not be sent because the server rejected the sender's email address. The sender's email address was '[email protected]'.
Subject 'Fw: trade brochure'
Server Error: 530
Server Response: 530 authentication required - Your email could not be sent. To fix this you must make a simple change to your email client (known as SMTP authentication). For advice visit http://www.bt.com/smtp
Server: 'smtp.btinternet.com'
Windows Live Mail Error ID: 0x800CCC78
Protocol: SMTP
Port: 25
Secure(SSL): No
this message keeps appearing every time i try to send an email from my account, please could you help me xHi,
You need to
check the box next to "My outgoing server (SMTP) requires authentication"
on the Outgoing Server tab and select the radio button for "Use same settings as my incoming mail server."
Since I don’t know which version of Outlook you are using, the third-party link below may be helpful to you:
Setting up Business Mail in Microsoft Outlook 2010 and 2013
In addition, you can ask in the forum below for further assistance:
http://answers.microsoft.com/en-us/office/forum/office_2013_release-outlook?sort=lastreplydate&dir=desc&tab=Threads&status=&mod=&modAge=&advFil=&postedAfter=&postedBefore=&threadType=All&tm=1386067216493
Best regards,
Susie -
When I try to reply to an e-mail, I get the message that the recipents e-mail address was rejected by the server because it does not allow relaying. How do I fix this?
Try this. Sometimes this is all that you need to do to fix that issue. Check the outgoing mail server setting. Make sure that your username and password are in there.
Settings>Mail, Contacts, Calendars>Your email account>Account>Outgoing mail server - tap the server name next to SMTP and check in the primary server and make sure your username and password are entered and correct - even if it says that the password is optional. -
How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated.How do I get messages to go back to an AIM account? It's only seeing the iPad's Facetime email address and not seeing the old AIM account name that is on my desktop. I am using my iMac using iChat to talk to a newer iMac that doesn't have iChat. We had this working using Messages and Facetime (on the new machine) talking to my existing iChat account. One day last week, when Facetime rang, my kids answered on the iPad. Dang! Now it's all fouled up! The new iMac won't see my AIM account name and shows that I'm offline, because the iPad is off. We were able to call using "most recent call" in Facetime, but now I can't go and control that new iMac remotely to help with some email concerns the user is having. I'm trying to not personalize this too much, but it's grandkids talking to Grandma and Mom and Dad trying to solve new machine hiccups. Normally, I could just go in via iChat and control the other machine and troubleshoot, but I can't do it with Facetime only. My buddy list doesn't see the other computer even though we are connected on Facetime right now. My name is not highlighted for the other computer. What could have gone so wrong?
Any help would be appreciated. -
My husband and I share a computer, have the same e-mail address, and have one iTunes account. Can we have different Apple ids on our individual iPhones or do we have to use the same one?
For purchasing from the iTunes and App stores, you will probably want to share the same Apple ID. But for other services such as iMessage, FaceTime and iCloud, you should use separate IDs. For example, if you use the same ID for iMessage you'll start getting each other's text messages. If you use the same ID for FaceTime you may get each other's FaceTime calls. If you set up the same iCloud account with the same ID, and data you sync with the account will be merged and the merged data will appear on all devices (i.e., you'll end up with each other's contacts and calendar events). You would also be sharing the same 5GB of free iCloud storage rather than each having your own 5GB of space.
This article may be of interest in this regard: http://gigaom.com/apple/itunes-101-multiple-devices-one-itunes-account/. Also, see this video:http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l.
Maybe you are looking for
-
I have purchased 4 books from Google Books, which are all DRM protected, and opened them in Adobe Digital Editions. The metadata for each book as far as pages is showing 168, though the books are far longer than 168 pages. When opened in ADE I can
-
My app store icon is gone as well as my safari app
My App Store and Safari apps are gone
-
Modifying A Final Cut Pro 6 Video Frame (Or Frames) In Photoshop CS3 ?
My method of doing this is very clumsy and I am sure there must be some more elegant way. I export the frame as a still image and modify it in PS after which I import it back into FCP and put it on the track immediately above the original frame. This
-
LSO - XI - Skillsoft integration, how to launch external course
Hi Gurus, I am working on a scenario where we are launching and tracking web based courses (Skill soft a third party). Let me give you more details of my scenario. 1) Commnication is from SAP LSO System to Third Party(Skill Soft) through PI(XI). 2) W
-
How to maintain a input tax code as a Fixed amount and not as a percentage
Hello all, I want to create a tax code which is not a % but a fixed amount. I created a new condition ZIPC copying JIPC but kept the calculation type as B i.e. Fixed Amount. I created a new Input tax code in FTXP. Now when i try to maintain the amou