Howto check my backup TAPE will work properly or not.

Hi all,
I am taking every day offline backup to my production server.
now i want check my tape, in case of restore it will work properly or not.
Thanks & Regards,
Satish kumar-k

Hi,
A point to add.
The Oracle DBVERIFY tool is available for both types of verify, that is, backup tape readability (but without a byte-by-byte comparison) and database block consistency.
To perform a backup verification, start BRTOOLS or BRGUI and choose Backup
and database copy → Verification of database backup and Backup and database
copy → Verification of archivelog backup respectively. Select the backup to
be verified from the list and select the type of verification in the option Use
DBVERIFY (use_dbv):
no means that only tape verification will be performed.
yes means that tape verification is performed and database block
consistency is checked.
Hope this helps.
Pl award suitably.
Regards

Similar Messages

[svn:fx-trunk] 13157: -revert a portion of my previous change so that asdoc will work properly - moved the proprietary automation swcs back into the libs directory .

Revision: 13157
Revision: 13157
Author:   [email protected]
Date:     2009-12-22 10:15:18 -0800 (Tue, 22 Dec 2009)
Log Message:
-revert a portion of my previous change so that asdoc will work properly - moved the proprietary automation swcs back into the libs directory. the automation projects swcs will still get compiled into the automation directory.
This should fix the build
QE notes: make sure packaging is correct
Doc notes: no
Bugs: no
Reviewer:no
Tests run: checkintests, doc targets run
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/build.xml
    flex/sdk/trunk/frameworks/projects/automation/build.xml
    flex/sdk/trunk/frameworks/projects/automation_air/build.xml
    flex/sdk/trunk/frameworks/projects/automation_dmv/build.xml
    flex/sdk/trunk/frameworks/projects/automation_flashflexkit/build.xml
    flex/sdk/trunk/frameworks/projects/automation_spark/build.xml
Added Paths:
    flex/sdk/trunk/frameworks/libs/automation_agent.swc
    flex/sdk/trunk/frameworks/libs/qtp.swc
    flex/sdk/trunk/frameworks/libs/qtp_air.swc
Removed Paths:
    flex/sdk/trunk/frameworks/libs/automation/

Revision: 13157
Revision: 13157
Author:   [email protected]
Date:     2009-12-22 10:15:18 -0800 (Tue, 22 Dec 2009)
Log Message:
-revert a portion of my previous change so that asdoc will work properly - moved the proprietary automation swcs back into the libs directory. the automation projects swcs will still get compiled into the automation directory.
This should fix the build
QE notes: make sure packaging is correct
Doc notes: no
Bugs: no
Reviewer:no
Tests run: checkintests, doc targets run
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/trunk/build.xml
    flex/sdk/trunk/frameworks/projects/automation/build.xml
    flex/sdk/trunk/frameworks/projects/automation_air/build.xml
    flex/sdk/trunk/frameworks/projects/automation_dmv/build.xml
    flex/sdk/trunk/frameworks/projects/automation_flashflexkit/build.xml
    flex/sdk/trunk/frameworks/projects/automation_spark/build.xml
Added Paths:
    flex/sdk/trunk/frameworks/libs/automation_agent.swc
    flex/sdk/trunk/frameworks/libs/qtp.swc
    flex/sdk/trunk/frameworks/libs/qtp_air.swc
Removed Paths:
    flex/sdk/trunk/frameworks/libs/automation/

How to check my RAC private interconnect working properly?

All,
Is there any way to check whether my RAC private interconnect is working properly or not?
Thanks,
Mahi

Mahi wrote:
All,
Is there any way to check whether my RAC private interconnect is working properly or not?
Thanks,
MahiCVU verifies the connectivity between all of the nodes in the cluster through those interfaces.
$cluvfy comp nodecon -n all -verbose
http://docs.oracle.com/cd/E11882_01/rac.112/e16794/cvu.htm

I have a Linksys 10/100 5 port workgroup switch attached to an Airport Extreme. Does anyone know if this setup will work properly?

I have a Linksys 10/100 5 port workgroup switch attached to an Airport Extreme to expand the number of ports. Does anyone know if this setup will work properly?

Sure - just be aware that it will limit you to 100Mb/s internal network speed. If you want to be able to transfer files internally on your network faster, look into a gigabit switch.
Matt

Firefox will not open on my computer the majority of the time. If I shut down and restart it will work sometimes, but not always. This started recently in the last two weeks. Today is June 12th 2011.

Firefox will not open on my computer the majority of the time. If I shut down and restart it will work sometimes, but not always. This started recently in the last two weeks. Today is June 12th 2011.

See:
* http://kb.mozillazine.org/Browser_will_not_start_up

Button is not working properly- why not?

Hello Everyone!
I have searched the forums for the answer for my question, and I have read the "read this before you post" information, and I can't find the answer to my issue/question.
I have a Captivate 4 project I have started, and I have inserted buttons on the slides (pretty basic task!). My issue is that the buttons I put on slides don't work 25% of the time. For example, I have a slide with a "next" button. I made sure to set the button up to "continue to next slide" when clicked. I go to view the project, and click "next" and nothing. *Sigh*
Then on another slide, I have put a transparent button over an image. I click on the transparent button over the image and nothing. It does nothing. I have saved the project, closed it, reopened it, and the buttons still don't work.
I recheck the properties of the buttons, and everything seems to be configured properly, but yet they do not work. Very frustrating. I can get most of my buttons to work properly, but randomly buttons are not working. What am I missing here?
Otherwise, I have Captivate 4, and my company probably won't be upgrading to Captivate 5.5. After reading how Captivate 4 projects won't open in Captivate 5.5, I'm fine with that decision. We have too many projects created in Captivate 4, to not be able to open them with 5.
Thanks for the help anyone can provide me!
Karen

Hello again
Okay, here is a trip up spot. When you configured your button or click box, did you also maybe clear the "Visible" check box? Many users misunderstand that beastie and clear it thinking "well, I don't want the user to see the button or click box".
Clearing it is a misguided attempt. The option is used when you wish to control things using Advanced Actions.
Also, is there a question slide between where you are and where you want to be? If so, sometimes your Quiz settings will prohibit jumping to a slide beyond the unanswered question.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

My computer was wiped clean and my backup didn't work properly, can I get my purchases back?

I had a nasty virus and my computer was wiped clean.My backup didn't backup properly so I only have folders, no files Can I recover any of my itunes that I had purchased? If so how?

Yes. Set up the new iTunes on your omputer, utorize it, then just log in to the iTunes Store with the Apple ID you used and select Purchases fom the Quick Links side bar on the right. Go thru all the tabs to download again for free.

I have a 4s and it keeps saying it is in oritation lock and can not get it out so the phone will work properly. please help

how do i restore my 4s can not get nothing to work

Swipe up from the bottom on the screen to get to Control Centre...
The button on the right is the Rotation lock... Turn it off.
See > http://support.apple.com/kb/ts3805
If unable to turn it off...
First try a Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least Ten seconds... (But can take Longer)... until the Apple logo appears. Release the Buttons
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414

Tabs will not load sometimes unless I move the cursor or hold down an arrow button. If I close all tabs and reopen, it will work properly for a while then start doing the same thing. I've tried disabling add-ons but it does not help.

I've had this problem with earlier versions of Firefox. I am currently running the latest version which I think is 6.0.1. Firefox also is not responding a lot since the latest version update. I'm running Windows 7 Home Premium 64 bit.

I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

[svn:fx-trunk] 5946: restore mxml-manifest. xml so that FB will work properly when working directly off the trunk

Revision: 5946
Author:   [email protected]
Date:     2009-04-06 09:12:34 -0700 (Mon, 06 Apr 2009)
Log Message:

Revision: 5946
Author:   [email protected]
Date:     2009-04-06 09:12:34 -0700 (Mon, 06 Apr 2009)
Log Message:

Messages not working properly, conversations not syncing

Macbook Pro 15" Mid-2010, Mac OS 10.10.1; iPhone 4S, iOS 7.0.0, Messages
When I receive an iMessage on my iPhone, the message is successfully pushed to my Mac and I get a notification in Notification Center. That's fine. However, when I launch Messages either by clicking the notification when it appears or by opening the app, no conversations appear (window displays "no conversations selected") and after a while it just leaves me with a blank window and only minimize / fullscreen enabled. The majority of options on the dropdown menus are also greyed out.
Considering that the messages themselves are successfully getting pushed to my Mac, I don't think it's an account issue. It seems as though the app is getting hung up trying to load up my conversations.
Any ideas as to what's going on? I originally had this issue on 10.10.0 so I thought that it may have been a bug and updated to 10.10.1. It only started happening a few days ago, I've been running Mac OS 10.10.X since several days after launch with no issues.

Hi,
In the Font Book app it does not appear alphabetically and is well down the list.
In my list there are only four fonts below it.
You can also check the Folder it is supposed to be in Manually.
Open the Hard Drive icon on the Desktop then /Library/Fonts
This is an unusual place for a "required" Font which normally are found in Hard Drive Name/System/Library/Fonts
It will be easier to reinstall the OS if it is Missing.
7:12 pm Wednesday; December 10, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Gmail is not working properly. gchat not loading. cannot write emails.

gchat won't load. when I click on box to write email, nothing will write. when I click on "settings" I get a "Loading" message. everything works fine using IE or Chrome. Gmail works fine using standard html

Any external USB CD/DVD drive will be compatible with your laptop.
However you wont be able to boot of CD's (Run Recovery for example) if you use an external drive.
So your best option would be to replace the internal drive with a Toshiba drive designed for the laptop. Call an ASP and ask for a quotation.

Safari not responding on ipad 2. Checked wi-fi, it's working. Ipad not receiving or sending mail, either.

I recently uploaded the new iOS6 operating system. My ipad worked fine until this morning. Watched video podcast, received early mail, but when I wrote 4 email messages I found them remaining in my inbox, and I was unable to get new mail, or to update facebook, or find webpages on Safari. Got the message 'server not responding.' I rebooted my wi-fi modem. Didn't help. Called wi-fi tech server. They couldn't find a problem. Wi-fi works on my computer and iphone. Checked settings. Wi-fi on and connected. Closed all apps, and re-booted ipad. Held down home botton and off button on ipad until the applea appeared, and waited. Problem remains. What else can I try?

I was unable to fix it on my own. My son suggested that I take it to the Genius Bar at an Apple Store. Fortunately I was going to be in the city, and was able to make an appt. with the store closest to me. A very helpful young 'genius' took my iPad in the back room and fixed it. I don't know what he did, but he said something about 'firmware'. I don't even know what firmware is, but he said it was unlikely that the problem would recur. There was a sense that it had to do with the new IOS6. If you are able to visit an Apple Store that is what I recommend. Make an appointment first online at Apple.com. The service is free and I was VERY grateful to have my iPad restored!

SMTP SSL - Don't know if it's working properly or not (newbie)

Mail is currently working. I can send and receive with no problems at all.
In Mail>Advanced>Security I have these settings: IMAP/POP "Require" for SSL and SMTP to "USE".
But, if I change SMTP to "Require", addresses outside my domain cannot send to me.
User receives "Delivery Notification Failed", Diagnostic code: smtp;530 5.7.0 Must issue a STARTTLS command first.
Addresses on my domain, however, can send with no problem.
I get these messages in IMAP>Log:
TLS server engine: cannot load CA data
and:
starttls: TLSv1 with cipher AES128-SHA (128/128 bits reused) no authentication
I don't know what to make of this or how to fix.

But, if I change SMTP to "Require", addresses outside my domain cannot send to me.
Sure. You can't expect every other mail server to support SSL. Those that don't (probably the majority) won't be able to send mail to your domain since they can't initiate an SSL session.
You should either have SSL set to 'USE' and trust that your clients are setup correctly, or use a different port for your clients and leave the public port set to 'Use'.
TLS server engine: cannot load CA data
This is a separate, unrelated issue. It isn't clear from your post whether this happens when the server starts, when specific clients connect, or when any client connects. Can you post more of the log?

How to check if my battery is working perfect or not ?

cycle count is 124.please help
thanks

Since you know your charge count, you also know the other battery-related statistics. What's the problem? You should familiarize yourself with the online documentation that is available.

Howto check my backup TAPE will work properly or not.

Similar Messages

Maybe you are looking for