Howto disable direct login into DB server
Hello Experts,
I have a very old system with me(SAP 4.0B running on AIX/Oracle DB) which has 7 application servers, however there is too much load on all servers.
I wish to restrict users logging directly onto the DB server.
Is there a way to disable users login into DB servers, I know about SAP logon groups, however a user would still be able to bypass it by configuring direct connection in the saplogon.
There could be a parameter perhaps that I don't recollect right now !
Any help is appreciated.
Regards,
Siddhesh
Hi Ermanno,
I was aware of this solution, but didn't have detailed knowledge about it , cause I am primarily a Basis guy.
I have assigned some points to you currently, I will check with my ABAPers and let you know.
Meanwhile I'll keep the question open, just in case if someone has some parameter or some other easier option available..
Thanks again.
Regards,
Siddhesh
Similar Messages
-
HTTP 403 when login into SSO-Server
Hello, all!
I have RHEL 3.0 and OAS 9.0.4. and Domain (Win2003).
I have configured the synchronization between Oracle Internet Directory and Microsoft Active Directory (AD). The Oracle SSO server configured to enable Microsoft Internet Explorer users to automatically authenticate to their web applications using their desktop credentials. So I use Windows Native Authentication.
About my problem:
In some computers when user try to login into SSO-Server (as sample, press button 'Login' in page http://host:port/oiddas) he gets error 'HTTP 403'. But this user can sit into other computer and login into Windows with him domain account and can login into SSO without any problem!
In some situation the windows user profile re-creating helps to get out this error.
But sometime only re-installation of Windows can help to resolve this problem.
Maybe anybody faced same challenge... and have a solution....
Help me, please!
Best regards,
Natalia.Installed tamper data and from what I can tell, the requests go back and forth between AM server and protected resource. Here's the Request Graph output.
http://iamsys06.iamtest.com:8080/ 302 103
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 16
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 200 16
http://iamsys05:9080/favicon.ico 404 50
http://iamsys05:9080/.../Login?AMAuthCookie=AQIC5wM2LY4Sfcz... 302 183
http://iamsys06.iamtest.com:8080/ 302 30
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 17
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 10711
http://iamsys06.iamtest.com:8080/ 302 23
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 15
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 16
http://iamsys06.iamtest.com:8080/ 302 18
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 17
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 13
http://iamsys06.iamtest.com:8080/ 302 13
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 10
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 10
http://iamsys06.iamtest.com:8080/ 302 16
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 11
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 12
http://iamsys06.iamtest.com:8080/ 302 12
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 10
http://iamsys05:9080/.../Login?goto=http%3A%2F%2Fiams... 302 12
http://iamsys06.iamtest.com:8080/ 302 12
http://iamsys05.iamtest.com:9080/.../Login?goto=http%3A%2... 302 10
| | | | |
URI Status Duration 20:59:52.542 20:59:56.512 21:00:00.482 21:00:04.451 21:00:08.421 -
Unable to login into Essbase server
Hi all,
I have installed Shared services and Essbase, I did "Externalize Users" in Essbase. It happened successfully. My understanding on this Externalize user is
"Essbase runs in Shared Services mode and in this mode Essbase create, Edit User permission becomes obsolete. You must be an Essbase administrator to manage users, and you must additionally be a Shared Services administrator to manage users from Shared Services"
Is this correct please validate. If this is correct, then if you change the password in shared services and sync the native directory in shared services, Essbase should work with new password but this is not happening when i try to connect the Essbase server it is throwing the below error.
"Error: 1051293: Login fails due to invalid login credentials"
Is there any other activity that has to be done in this process. I dont have clear idea on this Externalize users can any one explain.
Can any one help me in this urgent issue.
Regards,
Ramachandran JHi All,
Thanks for the reply. I have few more doubts.
At the time of configuring the Shared services the default login will be admin and password. But when i configure the Essbase with Shared services in Configuration Utility i had given the different user name as "essadmin".
So i have followed the following steps to do Externalize users in Essbase:-
1. Just created the same "essadmin" user in shared services
2. Done externalize users in Administration services first inside Essbase console, while doing that i have given my own password.
3. Then went into the specific Essbase server and right clicked security and externalized users there, here also while doing that i have given my own password.
By doing this step externalize users worked successfully and i can sink the user with shared services.
Can you let me know whether the above steps are correct or any other procedure is available??
And i have one more doubt....
Once externalize users has been done, all the essbase sample database and Analytic services got migrated to Shared services. Then i have created new planning application which reflected in both essbase and shared services.
Then i loged into shared services and created a new user, then granted only one specific sample application and planning application to that user and sinc with database and also i loged into planning application and refreshed database.
Then i logged into essbase with the newely created username and password... but i noticed that there is no Essbase server available with the new user login. So i added the same essbase server with "external authentation" ticked.
Once this is done all the availble application appeared in his login, Here it has Not restricted only to the applicaiton which i have given access to that user, it is showing all the application and also allowing to edit the application.
I just want to restrict a particular application to one particular user to edit the outline in essbase and this has to be acheived by giving access restriction in shared services.... now i am unable to acheive the same. Can any one help me in doing so???
Regards,
Ramachandran J -
Not able to login into presentations server
Hi,
I have installed OBIEE in my local machine. As a part of report creation I have created an rpd file and changed the NQSConfig.ini file as mentioned in
http://www.oracle.com/technology/obe/obe_bi/bi_ee_1013/bi_admin/biadmin.html.
Then I have re-started the OC4J server and all the OBIEE services. Then I open the Presentation Services, I am not able to log in. The error shown is
Error Codes: WH4KCFW6:OPR4ONWY:U9IM8TAC
Odbc driver returned an error (SQLDriverConnectW).
+State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 12008] Unable to connect to port 9703 on machine . [nQSError: 12010] Communication error connecting to remote end point: address = ; port = 9703. [nQSError: 12002] Socket communication error at call=: (Number=-1) Unknown (HY000)+
I have checked the Log file (NQServer.log file in /OracleBI/Server/log folder). The Entries in the Log file are like this
2009-10-27 18:00:42
[36007] Loading repository C:\OBIEE\OracleBI\server\Repository\EventHub.rpd.
2009-10-27 18:00:42
[14055] Loading subject area: EventHub ...
2009-10-27 18:00:42
[14056] Finished loading subject area: EventHub.
2009-10-27 18:00:42
[43030] : Oracle BI Server started. Version: 10.1.3.4.1.090414.1900.
2009-10-29 14:09:42
[nQSError: 12002] Socket communication error at call=send: (Number=10038) An operation was attempted on something that is not a socket.
2009-10-29 14:29:23
[43031] : Oracle BI Server shutdown.
2009-10-29 14:29:26
[14058] Unloaded all subject areas.
2009-10-29 15:01:55
[36007] Loading repository C:\OBIEE\OracleBI\server\Repository\EventHub.rpd.
2009-10-29 15:01:55
[14055] Loading subject area: EventHub ...
2009-10-29 15:01:55
[14056] Finished loading subject area: EventHub.
2009-10-29 15:01:55
[43030] : Oracle BI Server started. Version: 10.1.3.4.1.090414.1900.
I have already gone through the forums which are already logged reporting the same error. But I dint get any pointers to the solution.
Please let me know what might have gone wrong and how I can login to the Presentation Server and continue with report creation. Please let me know if you need further information on this .
Thanks in advance for your time,
Raj KumarHi,
The following is the NQSConfig.ini file.
# NQSConfig.INI
# Copyright (c) 1997-2006 Oracle Corporation, All rights reserved
# INI file parser rules are:
# If values are in literals, digits or _, they can be
# given as such. If values contain characters other than
# literals, digits or _, values must be given in quotes.
# Repository Section
# Repositories are defined as logical repository name - file name
# pairs. ODBC drivers use logical repository name defined in this
# section.
# All repositories must reside in OracleBI\server\Repository
# directory, where OracleBI is the directory in which the Oracle BI
# Server software is installed.
[ REPOSITORY ]
Star = EventHub.rpd, DEFAULT;
# Query Result Cache Section
[ CACHE ]
ENABLE = NO;
// A comma separated list of <directory maxSize> pair(s)
// e.g. DATA_STORAGE_PATHS = "d:\OracleBIData\nQSCache" 500 MB;
DATA_STORAGE_PATHS = "C:\OBIEE\OracleBIData\cache" 500 MB;
MAX_ROWS_PER_CACHE_ENTRY = 100000; // 0 is unlimited size
MAX_CACHE_ENTRY_SIZE = 1 MB;
MAX_CACHE_ENTRIES = 1000;
POPULATE_AGGREGATE_ROLLUP_HITS = NO;
USE_ADVANCED_HIT_DETECTION = NO;
MAX_SUBEXPR_SEARCH_DEPTH = 7;
// Cluster-aware cache
// GLOBAL_CACHE_STORAGE_PATH = "<directory name>" SIZE;
// MAX_GLOBAL_CACHE_ENTRIES = 1000;
// CACHE_POLL_SECONDS = 300;
// CLUSTER_AWARE_CACHE_LOGGING = NO;
# General Section
# Contains general server default parameters, including localization
# and internationalization, temporary space and memory allocation,
# and other default parameters used to determine how data is returned
# from the server to a client.
[ GENERAL ]
// Localization/Internationalization parameters.
LOCALE = "English-usa";
SORT_ORDER_LOCALE = "English-usa";
SORT_TYPE = "binary";
// Case sensitivity should be set to match the remote
// target database.
CASE_SENSITIVE_CHARACTER_COMPARISON = OFF ;
// SQLServer65 sorts nulls first, whereas Oracle sorts
// nulls last. This ini file property should conform to
// that of the remote target database, if there is a
// single remote database. Otherwise, choose the order
// that matches the predominant database (i.e. on the
// basis of data volume, frequency of access, sort
// performance, network bandwidth).
NULL_VALUES_SORT_FIRST = OFF;
DATE_TIME_DISPLAY_FORMAT = "yyyy/mm/dd hh:mi:ss" ;
DATE_DISPLAY_FORMAT = "yyyy/mm/dd" ;
TIME_DISPLAY_FORMAT = "hh:mi:ss" ;
// Temporary space, memory, and resource allocation
// parameters.
// You may use KB, MB for memory size.
WORK_DIRECTORY_PATHS = "C:\OBIEE\OracleBIData\tmp";
SORT_MEMORY_SIZE = 4 MB ;
SORT_BUFFER_INCREMENT_SIZE = 256 KB ;
VIRTUAL_TABLE_PAGE_SIZE = 128 KB ;
// Analytics Server will return all month and day names as three
// letter abbreviations (e.g., "Jan", "Feb", "Sat", "Sun").
// To use complete names, set the following values to YES.
USE_LONG_MONTH_NAMES = NO;
USE_LONG_DAY_NAMES = NO;
UPPERCASE_USERNAME_FOR_INITBLOCK = NO ; // default is no
// Aggregate Persistence defaults
// The prefix must be between 1 and 8 characters long
// and should not have any special characters ('_' is allowed).
AGGREGATE_PREFIX = "SA_" ;
# Security Section
# Legal value for DEFAULT_PRIVILEGES are:
# NONE READ
[ SECURITY ]
DEFAULT_PRIVILEGES = READ;
PROJECT_INACCESSIBLE_COLUMN_AS_NULL = NO;
MINIMUM_PASSWORD_LENGTH = 0;
#IGNORE_LDAP_PWD_EXPIRY_WARNING = NO; // default is no.
#SSL=NO;
#SSL_CERTIFICATE_FILE="servercert.pem";
#SSL_PRIVATE_KEY_FILE="serverkey.pem";
#SSL_PK_PASSPHRASE_FILE="serverpwd.txt";
#SSL_PK_PASSPHRASE_PROGRAM="sitepwd.exe";
#SSL_VERIFY_PEER=NO;
#SSL_CA_CERTIFICATE_DIR="CACertDIR";
#SSL_CA_CERTIFICATE_FILE="CACertFile";
#SSL_TRUSTED_PEER_DNS="";
#SSL_CERT_VERIFICATION_DEPTH=9;
#SSL_CIPHER_LIST="";
# There are 3 types of authentication. The default is NQS
# You can select only one of them
#----- 1 -----
#AUTHENTICATION_TYPE = NQS; // optional and default
#----- 2 -----
#AUTHENTICATION_TYPE = DATABASE;
# [ DATABASE ]
# DATABASE = "some_data_base";
#----- 3 -----
#AUTHENTICATION_TYPE = BYPASS_NQS;
# Server Section
[ SERVER ]
SERVER_NAME = Oracle_BI_Server ;
READ_ONLY_MODE = NO; // default is "NO". That is, repositories can be edited online.
MAX_SESSION_LIMIT = 2000 ;
MAX_REQUEST_PER_SESSION_LIMIT = 500 ;
SERVER_THREAD_RANGE = 40-100;
SERVER_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
DB_GATEWAY_THREAD_RANGE = 40-200;
DB_GATEWAY_THREAD_STACK_SIZE = 0; // default is 256 KB, 0 for default
MAX_EXPANDED_SUBQUERY_PREDICATES = 8192; // default is 8192
MAX_QUERY_PLAN_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_INFO_CACHE_ENTRIES = 1024; // default is 1024
MAX_DRILLDOWN_QUERY_CACHE_ENTRIES = 1024; // default is 1024
INIT_BLOCK_CACHE_ENTRIES = 20; // default is 20
CLIENT_MGMT_THREADS_MAX = 5; // default is 5
# The port number specified with RPC_SERVICE_OR_PORT will NOT be considered if
# a port number is specified in SERVER_HOSTNAME_OR_IP_ADDRESSES.
RPC_SERVICE_OR_PORT = 9703; // default is 9703
# If port is not specified with a host name or IP in the following option, the port
# number specified at RPC_SERVICE_OR_PORT will be considered.
# When port number is specified, it will override the one specified with
# RPC_SERVICE_OR_PORT.
SERVER_HOSTNAME_OR_IP_ADDRESSES = "ALLNICS"; # Example: "hostname" or "hostname":port
# or "IP1","IP2":port or
# "hostname":port,"IP":port2.
# Note: When this option is active,
# CLUSTER_PARTICIPANT should be set to NO.
ENABLE_DB_HINTS = YES; // default is yes
PREVENT_DIVIDE_BY_ZERO = YES;
CLUSTER_PARTICIPANT = NO; # If this is set to "YES", comment out
# SERVER_HOSTNAME_OR_IP_ADDRESSES. No specific NIC support
# for the cluster participant yet.
// Following required if CLUSTER_PARTICIPANT = YES
#REPOSITORY_PUBLISHING_DIRECTORY = "<dirname>";
#REQUIRE_PUBLISHING_DIRECTORY = YES; // Don't join cluster if directory not accessible
DISCONNECTED = NO;
AUTOMATIC_RESTART = YES;
# Dynamic Library Section
# The dynamic libraries specified in this section
# are categorized by the CLI they support.
[ DB_DYNAMIC_LIBRARY ]
ODBC200 = nqsdbgatewayodbc;
ODBC350 = nqsdbgatewayodbc35;
OCI7 = nqsdbgatewayoci7;
OCI8 = nqsdbgatewayoci8;
OCI8i = nqsdbgatewayoci8i;
OCI10g = nqsdbgatewayoci10g;
DB2CLI = nqsdbgatewaydb2cli;
DB2CLI35 = nqsdbgatewaydb2cli35;
NQSXML = nqsdbgatewayxml;
XMLA = nqsdbgatewayxmla;
ESSBASE = nqsdbgatewayessbasecapi;
# User Log Section
# The user log NQQuery.log is kept in the server\log directory. It logs
# activity about queries when enabled for a user. Entries can be
# viewed using a text editor or the nQLogViewer executable.
[ USER_LOG ]
USER_LOG_FILE_SIZE = 10 MB; // default size
CODE_PAGE = "UTF8"; // ANSI, UTF8, 1252, etc.
# Usage Tracking Section
# Collect usage statistics on each logical query submitted to the
# server.
[ USAGE_TRACKING ]
ENABLE = NO;
//==============================================================================
// Parameters used for writing data to a flat file (i.e. DIRECT_INSERT = NO).
STORAGE_DIRECTORY = "<full directory path>";
CHECKPOINT_INTERVAL_MINUTES = 5;
FILE_ROLLOVER_INTERVAL_MINUTES = 30;
CODE_PAGE = "ANSI"; // ANSI, UTF8, 1252, etc.
//==============================================================================
DIRECT_INSERT = YES;
//==============================================================================
// Parameters used for inserting data into a table (i.e. DIRECT_INSERT = YES).
PHYSICAL_TABLE_NAME = "<Database>"."<Catalog>"."<Schema>"."<Table>" ; // Or "<Database>"."<Schema>"."<Table>" ;
CONNECTION_POOL = "<Database>"."<Connection Pool>" ;
BUFFER_SIZE = 10 MB ;
BUFFER_TIME_LIMIT_SECONDS = 5 ;
NUM_INSERT_THREADS = 5 ;
MAX_INSERTS_PER_TRANSACTION = 1 ;
//==============================================================================
# Query Optimization Flags
[ OPTIMIZATION_FLAGS ]
STRONG_DATETIME_TYPE_CHECKING = ON ;
# CubeViews Section
[ CUBE_VIEWS ]
DISTINCT_COUNT_SUPPORTED = NO ;
STATISTICAL_FUNCTIONS_SUPPORTED = NO ;
USE_SCHEMA_NAME = YES ;
USE_SCHEMA_NAME_FROM_RPD = YES ;
DEFAULT_SCHEMA_NAME = "ORACLE";
CUBE_VIEWS_SCHEMA_NAME = "ORACLE";
LOG_FAILURES = YES ;
LOG_SUCCESS = NO ;
LOG_FILE_NAME = "C:\OBIEE\OracleBI\server\Log\CubeViews.Log";
# MDX Member Name Cache Section
# Cache subsystem for mapping between unique name and caption of
# members for all SAP/BW cubes in the repository.
[ MDX_MEMBER_CACHE ]
// The entry to indicate if the feature is enabled or not, by default it is NO since this only applies to SAP/BW cubes
ENABLE = NO ;
// The path to the location where cache will be persisted, only applied to a single location,
// the number at the end indicates the capacity of the storage. When the feature is enabled,
// administrator needs to replace the "<full directory path>" with a valid path,
// e.g. DATA_STORAGE_PATH = "C:\OracleBI\server\Data\Temp\Cache" 500 MB ;
DATA_STORAGE_PATH = "C:\OBIEE\OracleBIData\cache" 500 MB;
// Maximum disk space allowed for each user;
MAX_SIZE_PER_USER = 100 MB ;
// Maximum number of members in a level will be able to be persisted to disk
MAX_MEMBER_PER_LEVEL = 1000 ;
// Maximum size for each individual cache entry size
MAX_CACHE_SIZE = 100 MB ;
# Oracle Dimension Export Section
[ ORA_DIM_EXPORT ]
USE_SCHEMA_NAME_FROM_RPD = YES ; # NO
DEFAULT_SCHEMA_NAME = "ORACLE";
ORA_DIM_SCHEMA_NAME = "ORACLE";
LOGGING = ON ; # OFF, DEBUG
LOG_FILE_NAME = "C:\OBIEE\OracleBI\server\Log\OraDimExp.Log";
One more thing is that I have kept the BI server (OC4J server) runnung.
Does the time of the error in NQSServer.log match with when you try to login to Presentation Services?
I donot see any error matching the time of loginto presentation services. -
Direct login into a CIVS-IPC-2500: username & password required
Hi,
I'm integrating a couple of CIVS-IPC-2500 in a domotics project.
So far, I've setup the cams, I'm able to see a picture with a browser and http://<ip>/img/video.mjpeg.
I'm unable to get the picture in the domotics supervisor. I realize now that when I use the http://<ip>/img/video.mjpeg syntax on a new PC, I get a pop-up asking for username & password. On my "work" PC, this syntax works because I've already done a logon, so username & password are cached.
Is it possible to login directly into the cam without supplying any username & password ?
I've reset the cam to factory defaults and done the setup again, trying blank password, but it's not allowed
Any hint ?
ThanksHi,
Thanks for the quick reply.
Indeed, security isn't a concern, so I thought about the trick to embed the username & password.
The problem: the domotic supervisor doesn't allow me to do that.
I'm stuck -
Login to BI Server using Oracle BI Publisher Desktop 11g
I have been trying to login into Bi Server using Oracle Bi Publisher Desktop. Once I try to login, a credentials error pops-up saying 'Please Contact your administrator for userid/password'. I am sure the credentials are correct because I used them on a different computer of the same specifications as mine for another user. Please help me.
I am having the same issue.
BI Publisher Desktop 11.1.1.6 32-bit
Office/Word 2010 32-bit
Windows 7 32-bit
Just found a solution that worked for me:
uninstalled BI Publisher Desktop 11.1.1.6 32-bit
manually deleted old installation directory
renamed all .exd files on harddisk to .exd.bak
deleted all temorary files
installed BI Publisher Desktop 11.1.1.5 as administrator
started word 2010 as administrator
Edited by: statra on 14.06.2012 14:30 -
How to disable automatic login and to see other accounts?
I bought MacBook Pro Retina with Mac OS X 10.8.2 in a shop, where there already was account "kiosk".
I created new account, gave him Administrator priviliges.
In the Preferences / Users & Groups I see kiosk account as "Managed", and my new account as "Admin".
I set:
System Preferences / Security & Privacy / General / Disable automatic login = Checked.
System Preferences / Users & Groups / Login Options / Automatic login = Off.
But still I have two issues:
1) After start the laptop automatically logins into kiosk account, while I explicitly switched off this option
2) Apart from kiosk account, the OS doesn't see any other accounts, for example my new account.
For example, when I changed login shell for kiosk account into /usr/bin/false, I couldn't login at all. The OS said something like, there are no active accounts. So I had to set login shell back to /bin/bash using single-user mode.
The questions are:
How to disable automatic login into kiosk account?
How to see a choice between kiosk account and my new account in the login dialog?
How to delete kiosk account? Currently the delete option is disabled for kiosk in System Preferences / Users & Groups.
So far after laptop start I automatically login into kiosk, then switch into my new account with entering a password, which is weird.
Thanks in advance.It is your only option if you want to get rid of that other user account. It seems the system is Hard Set to boot to that account. How and why I have not Idea but the first thing you should of done was Restoring it to the Original OS, if it was not Mt Lion to begin with, in doing so getting rid of all other accounts and files from that other account.
Time to Bit the Bullet and Erase the drive completely and reinstall the original shipping version of OS X on that system.
Anton Mironenko wrote:
Reinstalling the OS would be too extreme. I already have many programs installed, and I tuned a lot of params. Data migration is another pain.
I hope, it is possible to solve this issue in another way. -
Hi ,
I know how to disable direct root login. but i have to disable direct root login for oracle.i am using Red Hat Enterprise Linux Server release 5.5 (Tikanga).
Can some one help me ...
Regards,
AniYou might want to keep in mind though that "su" will break X11 xauth authentication (ssh -X). Having to login as another user is another password layer, but does not necessarily give you more control who gets access. It depends on your password policies and the users maintaining them. It might be a good idea to be careful who receives the Oracle password. Not every access to Oracle requires the Oracle account password or SYSDBA access.
-
To disable user login on a solaris 10 server
Hello Everybody
I want to know how to disable further users login, if suppose there are 10 users already login on a server & I don't want any more user to login on a server without getting those exsisting users to logoff.
RegardsI suppose you could write a wrapper script that uses who to count the number of connections and then:
touch /etc/nologin
to disable further logons at some arbitrary number. Then you could stick the script into cron and let it do it's thing.
alan -
Logging into 'Other' (Server) login doesn't show though bind does
Working on an OS 10.5.6 Advanced server that was set and users were only using AFP, but no DNS and Open Directory. So carefully went through and set these up.The standard testing 'checkhost' and all, shows DNS is working correctly. Client computers had the DNS pointer changed and went through Dirctory Utility and did the binding. Server indicates these computers are bound. One of four client computers works as expected, "Other" shows as a login choice and can log into the server. All the different client accounts work throught this station. Three computers show as Bind being setup, but the "Other" login simply doesn't appear. All but one are running 10.5.6, with one computer running 10.4.11. All three computers that show as bound, can sign in via Go > to the AFP share(s) just fine, only the server/network login doesn't appear. Have checked everything we can think of and need further suggestions on how to resolve this issue? - Lewis
LDAP is indeed listed and home folders have been created in an Auto-Mount directory. Everything appears just like the computers on this network that are binding OK and show an "Other" login. Now I have noticed one thing... every so often when I open Directory Utility - it shows the staus as "nonresponding" with a red dot. If I hit "Connect" it changes to a green OK dot, but upon logout/login the "Other" is still not a choice. Ran Disk Repair, Repair Permissions, re-ran the combo updater of the current system - 10.5.6. Ran the unbind on the computer and removed computer from Workgroup manager... still no joy. Just do not see a way to get a reliable Bind and network login? Bind seems to be happening... but "Other" as a network login just doesn't show.
-
How to login as a non root user into linux server after rebooting
Hi,
Even though it is not related to Oracle, but i assume that all you are aware about linux.
I wrote a script to make DB up automatically when i reboot the server. But i have to login into the sever as the nonroot user instead of root user automatically.
How can i do this?
Thanks
MahiSee "How do I get Oracle to automatically start when my server boots up?" in http://orafaq.com/faqunix.htm
-
Possible to retrieve Hyperion data directly into SQL Server?
Currently we retrieve data into Excel spreadsheets and then often import it into SQL Server. It would simplify things if it was possible to call HPVAL from within SQL.
Is anyone doing this?
Any suggestions on where to research this further?
Thx.
BrooksHello Amith,
Have a look at the following from the documentation.
SET DATAEXPORTOPTIONS
DataExportRelationalFile ON | OFF;
DataExportRelationalFile ON | OFF
ON—The output text export file is formatted for import to a relational database.
For direct export to a relational database using ODBC:
DATAEXPORT "DSN" "dsnName" "tableName" "userName" "password"
I hope this helps.
Regards,
Philip Hulsebosch. -
SOLVED - Unable to login into xfce after upgrade
I upgraded my Arch computer. When rebooting I get SLIM and can enter my login/password but can go any further as it loops back to SLIM. I've read another post on consolekit & HAL.
I have consolekit 0.4.1-2 and HAL 0.5.14-1. SLIM gets started via /etc/inittab
id:5:initdefault:
x:5:respawn:/usr/bin/slim >& /dev/null
And my .xinitrc looks like:
#!bin/sh
exec ck-launch-session startxfce4
It has been working for months this way. Too bad to be stuck today.
Any hint on how I can debug this issue?
Thanks
Alphazo
---> ANSWER IS HERE:
http://bbs.archlinux.org/viewtopic.php?id=86747
Just had to
sudo rm ~/.ICEauthority
and rebooted.
COOL... That didn't even give me enough time to get nervous.
EDIT
I killed SLIM and tried to launch 'startx'. I don't know how to copy/paste from the command line but what I see is :
(EE) Failed to load module "fbdev" (module does not exist, 0)
xf86TokenToOptInfo: table is NULL
(EE) config/hal: couldn't find input devices: org.freedesktop.DBus.Error.AccessDenied (Rejected send message, 1 matched rules; type="method_call", sender.........
<stdin>3: error: Unknown #directive "Xft"
EDIT2
Here is a copy of the log files after rebooting:
/var/log/slim.log
/usr/bin/xauth: creating new authority file /var/run/slim.auth
slim: waiting for X server to begin accepting connections
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux ARCH-DN 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/046d7122-21a4-47df-8f19-3fb5ebec9192 ro vga=773
Build Date: 12 December 2009 12:59:40PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 24 19:46:20 2009
(==) Using default built-in configuration (30 lines)
.(EE) Failed to load module "fbdev" (module does not exist, 0)
xf86TokenToOptinfo: table is NULL
xf86TokenToOptinfo: table is NULL
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
Errors from xkbcomp are not fatal to the X server
/usr/bin/xauth: creating new authority file /home/dnativel/.Xauthority
/usr/bin/startxfce4: X server already running on display :0.0
<stdin>:1: error: Unknown #directive "Those"
# Those are fallback settings, use the ui plugin to change it
<stdin>:2: error: Unknown #directive "or"
# or add your overrides to ~/.Xresources
<stdin>:3: error: Unknown #directive "Xft"
# Xft.hintstyle: hintnone/hintslight/hintmedium/hintfull
<stdin>:4: error: Unknown #directive "Xft"
# Xft hinting: 1/0
4 errors in preprocessor.
xrdb: "Xft.hinting" on line 9 overrides entry on line 6
xrdb: "Xft.hintstyle" on line 11 overrides entry on line 7
Agent pid 3015
xfce4-session: Unable to access file /home/dnativel/.ICEauthority: Permission non accordée
Agent pid 3015 killed
slim: waiting for X server to shut down.
/usr/bin/xauth: creating new authority file /var/run/slim.auth
slim: waiting for X server to begin accepting connections
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux ARCH-DN 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/046d7122-21a4-47df-8f19-3fb5ebec9192 ro vga=773
Build Date: 12 December 2009 12:59:40PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 24 19:46:56 2009
(==) Using default built-in configuration (30 lines)
(EE) Failed to load module "fbdev" (module does not exist, 0)
xf86TokenToOptinfo: table is NULL
xf86TokenToOptinfo: table is NULL
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Type "ONE_LEVEL" has 1 levels, but <RALT> has 2 symbols
> Ignoring extra symbols
Errors from xkbcomp are not fatal to the X server
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Duplicate shape name ""
> Using last definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
> Warning: Multiple doodads named ""
> Using first definition
Errors from xkbcomp are not fatal to the X server
/var/log/Xorg.0.log
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.3.901 (1.7.4 RC 1)
Release Date: 2009-12-11
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32-ARCH i686
Current Operating System: Linux ARCH-DN 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:48:17 CET 2009 i686
Kernel command line: root=/dev/disk/by-uuid/046d7122-21a4-47df-8f19-3fb5ebec9192 ro vga=773
Build Date: 12 December 2009 12:59:40PM
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 24 19:46:56 2009
(II) Loader magic: 0x81e4c60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:27a2:1028:0201 Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xeff00000/524288, 0xd0000000/268435456, 0xefec0000/262144, I/O @ 0x0000eff8/8
(--) PCI: (0:0:2:1) 8086:27a6:1028:0201 Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xeff80000/524288
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default intel Device 0"
Driver "intel"
EndSection
Section "Screen"
Identifier "Builtin Default intel Screen 0"
Device "Builtin Default intel Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default intel Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AutoAddDevices.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 2.2.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(WW) Falling back to old probe method for vesa
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) intel(0): Creating default Display subsection in Screen section
"Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xEFF00000 size 524288
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(II) intel(0): the SDVO device with slave addr 70 is found on DVO 1 port
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LCD", prod id 14086
xf86TokenToOptinfo: table is NULL
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): I2C bus "SDVOB DDC Bus" initialized.
(II) intel(0): Output TMDS-1 has no monitor section
(II) intel(0): SDVOB: device VID/DID: 04:AA.03, clock range 25.0MHz - 165.0MHz
(II) intel(0): SDVOB: 1 input channel
(II) intel(0): SDVOB: TMDS0 output reported
xf86TokenToOptinfo: table is NULL
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): EDID vendor "LCD", prod id 14086
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TMDS-1 disconnected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.3.901, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000000 to 0x00000020
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000400
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x00000203
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000202
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): Kernel reported 488960 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1955836 kB available
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): Current clock rate multiplier: 1
(II) intel(0): adjusting plane->pipe mappings to allow for framebuffer compression
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x005fffff: compressed frame buffer (6144 kB, 0x000000007f800000 physical
(II) intel(0): 0x00600000-0x00600fff: compressed ll buffer (4 kB, 0x000000007fe00000 physical
(II) intel(0): 0x00601000-0x0060afff: HW cursors (40 kB, 0x000000007fe01000 physical
(II) intel(0): 0x0060b000-0x0060bfff: overlay registers (4 kB, 0x000000007fe0b000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x007bf000-0x0f9f3fff: DRI memory manager (248020 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): BO memory allocation layout:
(II) intel(0): 0x007bf000: start of memory manager
(II) intel(0): 0x00800000-0x00ffffff: front buffer (8192 kB) X tiled
(II) intel(0): 0x0f9f4000: end of memory manager
(II) intel(0): using SSC reference clock of 96 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane B is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane A is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TMDS-1 is connected to pipe none
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: DRI2 Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 338 x 211
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device AlpsPS/2 ALPS DualPoint TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.3, module version = 1.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.1
(**) Option "Device" "/dev/input/event8"
(II) AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023
(II) AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767
(II) AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
(II) AlpsPS/2 ALPS DualPoint TouchPad: finger width range 0 - 0
(II) AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
(II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD)
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
(**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 0
(--) AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
(II) config/hal: Adding input device DualPoint Stick
(**) DualPoint Stick: always reports core events
(**) DualPoint Stick: Device: "/dev/input/event7"
(II) DualPoint Stick: Found 3 mouse buttons
(II) DualPoint Stick: Found relative axes
(II) DualPoint Stick: Found x and y relative axes
(II) DualPoint Stick: Configuring as mouse
(**) DualPoint Stick: YAxisMapping: buttons 4 and 5
(**) DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "DualPoint Stick" (type: MOUSE)
(**) DualPoint Stick: (accel) keeping acceleration scheme 1
(**) DualPoint Stick: (accel) acceleration profile 0
(II) DualPoint Stick: initialized for relative axes.
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event4"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "fr"
(II) AIGLX: Suspending AIGLX clients for VT switch
Last edited by alphazo (2009-12-25 00:04:20)Hi John,
Thanks for reply
I got error while doing following steps in few procedures
Change directory to c:\oraclexe\apex\owa, open the README.TXT file and follow the instructions within to complete the installation
Before doing the above step i was able to login into my application but without images
Can you please help that how to check those errors and any particular procedure you know which is responsible for the Login problem.
Thanks a Lot for help John
Thanks & Regards
Sanjay -
Howto deploy a temporary exchange 2013 server for migration between two Office 365 accounts?
Objective:
We plan to migrate our office 365 from our current tennant (E3) to a new tennant (M) to drastically cut our annual costs for the same services, while retaining the mail and group memberships of all our users. This will involve installing an exchange server
to download and upload mail from the old tennant to the new tennant.
Background:
We are a longtime O365 customer, and have been a customer since before the "Midsize business" plans existed. There is no "cookie cutter" migration path from E3 to M. Microsoft currently recommends deploying an MS exchange server and off-boarding
the mailboxes from your E3 subscription and then On-boarding them to a new account under the M plan. As ridiculous as this is, this is indeed the path our company has decided to go. It isn't cool/fair that we're being shackled to the E plans (that are
vastly more expensive) when we're a small/midsize business that has been a longtime customer of O365, while new customers of equal size to us can expect to save over $4000 annually. The services (when compared) offered are nearly identical.
After calling MS support several times for guidance for this issue, I am advised that we should contact a 'partner' and ask for their support in doing this migration. We did as requested and were provided a quote to the tune of approximately $15,000 to do this
migration for us. Obviously this is unacceptable, and thus our business has decided to rely on my abilities to get it done. Again, involving an MS partner is not an option.
Environment:
1 MS AD domain:
- Original FQDN was @contoso.ca of this domain and UPNs were [email protected]
- UPN has been changed to [email protected] to allow for ADFS
- ADFS has been deployed and SSO works for all users with UPN [email protected]
- An "On-Prem exchange server" does not yet exist
1 O365 Account where main tennant FQDN is @corp.com
- There are 5 registered domains
-contoso.ca
-corp.com
- contoso.legacy.ca
-deprecated/will be deleted
-deprecated/will be deleted
- There are 40 E3 licenses, all using a @corp.com UPN
- There are 5 E1 licenses (we acknowledge that these will be upgraded to an M following the migration) that use the UPN contoso.legacy.ca
- No accounts currently use contoso.ca for email
- O365 was upgraded to 'the latest version' sometime in summer 2013.
Migration Plan (High Level):
Setup a local windows server (trial license)
Deploy an exchange 2013 server (trial license) on the aforementioned windows server http://technet.microsoft.com/en-us/evalcenter/hh973395.aspx
Prepare and deploy Dirsync Deployment
of Dirsync
Add exchange to office 365 and begin replicating the mailboxes from the cloud to the exchange server. Wait for synchronization to complete.
More information: http://technet.microsoft.com/en-us/library/hh534377(v=exchg.150).aspx
http://help.outlook.com/en-us/140/ff633682.aspx
Evaluate total time it took to sync data.
Time it takes to download data to exchange should be relatively similar to time it takes to restore mail to the new service.
Open a new office365 account under the M plan.
Plan a 1 hour mail & contoso.ca domain login outage
temporarily change all user UPN's to match the new tennant
perform a dirsync to the new tennant
disable dirsync after all accounts have been auto-created/provisioned
re-establish UPN + mail access.
Plan a date and time for the cut over.
remove the exchange hybrid server from the old tennant.
Point MX records directly to the exchange server.
Cut office 365 service.
After the 30 minutes ~ 1 hour 'mandatory' wait time imposed by MS to 'register' the domain with O365, add @corp.com to
the new tennant
fix all user UPN's in the cloud to match their real UPN's.
This can be done with powershell.
attach exchange hybrid server to new tennant
Point MX records to the new tennant
Migrate all data from the local exchange server to the cloud under the new plan.
Current progress (Lab):
I have created a sandbox (Lab with no internet access or connectivity to production) environment in VMware and cloned the following servers to it:
1x Domain Controller (DC) running windows server 2012 (named DC02)
1x DC running windows server 2008 R2 (named DC01)
1x windows server 2012 R2 - prepped with all the pre-requisites to install exchange 2013. (named EXC01)
Where I am stuck / Problem:
I have installed exchange on the server EXC01 in the lab environment using my account. I am a domain administrator in the contoso.ca domain, but my UPN is [email protected].
After the installation of exchange, I notice that my email address in Active Directory changed from @corp.com to @contoso.ca. By default, I do not see @corp.com to be an available email address to select as my email address, and changing it in AD does not resolve
the problem.
In the exchange portal, I found "Mail flow ---> Accepted Domains", and believe I should add @corp.com to the accepted domain list. Questions:
1) Must I add corp.com and the other domains that exist in office 365 to the local exchange before I go through with the hybrid wizard?
2) If I must add them to exchange, I am provided with three choices:
- Authoritative Domain
- Internal Relay Domain
- External Relay Domain
Given that the domain is currently in office365 and is authoritative there, which of these applies?
3) Most documentation I have found has been about a one way migration from on-prem to the cloud. I have had a hard time finding a step by step guide for cloud to local (new server) and then back to cloud. Does anyone here have any good documentation for this
process? Would love it if it took into consideration multiple UPN/email addresses.Hi,
Here are my answers you can refer to:
1. Yes, we should select the primary SMTP domain for our organization and any other accepted domains that will be used in the hybrid deployment:
http://technet.microsoft.com/en-us/library/jj200787(v=exchg.150).aspx
2. It depends on the usage of the specific accepted domain. And Exchange version has no influence.
To determine it, you can firstly check the function of the three types in the following article:
http://technet.microsoft.com/en-us/library/bb124423(v=exchg.150).aspx
3. Here are some reference about the migration from on-premise Exchange server to Office 365:
http://www.msexchange.org/articles-tutorials/office-365/exchange-online/configuring-exchange-2013-hybrid-deployment-migrating-office-365-exchange-online-part1.html
Additionally, since the issue is related to Exchange online, I recommend you ask for help on our Exchange online forum to get more professional help:
http://social.technet.microsoft.com/Forums/msonline/en-US/home?forum=onlineservicesexchange
If you have any question, please feel free to let me know.
thanks,
Angela Shi
TechNet Community Support -
Can't login into NW after a new patch.
Hi experts.
Yestoday I installed a new patch KB70010,after that use command SGEN to compile all source in component BASIS.This process began and said theres 2 hours left to complete.
But this morning i can't login into the system,seems the SGEN not successful or sth else.....
disp+work is in yellow status with a message: Running but not connected to Message Server.J2EE status info unavailable.
here's the developer trace.
trc file: "dev_disp", trc level: 1, release: "700"
sysno 01
sid ER1
systemid 560 (PC with Windows NT)
relno 7000
patchlevel 0
patchno 75
intno 20050900
make: multithreaded, Unicode, optimized
pid 6112
Tue Jun 03 10:51:31 2008
kernel runs with dp version 217000(ext=109000) (@(#) DPLIB-INT-VERSION-217000-UC)
length of sys_adm_ext is 572 bytes
SWITCH TRC-HIDE on ***
***LOG Q00=> DpSapEnvInit, DPStart (01 6112) [dpxxdisp.c 1237]
shared lib "dw_xml.dll" version 75 successfully loaded
shared lib "dw_xtc.dll" version 75 successfully loaded
shared lib "dw_stl.dll" version 75 successfully loaded
shared lib "dw_gui.dll" version 75 successfully loaded
shared lib "dw_mdm.dll" version 75 successfully loaded
rdisp/softcancel_sequence : -> 0,5,-1
use internal message server connection to port 3901
Tue Jun 03 10:51:36 2008
WARNING => DpNetCheck: NiAddrToHost(1.0.0.0) took 5 seconds
***LOG GZZ=> 1 possible network problems detected - check tracefile and adjust the DNS settings [dpxxtool2.c 5273]
MtxInit: 30000 0 0
DpSysAdmExtInit: ABAP is active
DpSysAdmExtInit: VMC (JAVA VM in WP) is not active
Tue Jun 03 10:51:41 2008
ERROR => OpenProcess PID 3180 failed for checking semaphore 4
ERROR_INVALID_PARAMETER: The parameter is incorrect. [semnt.c 1892]
DpIPCInit2: start server >EXXEPT01_ER1_01 <
DpShMCreate: sizeof(wp_adm) 26752 (1408)
DpShMCreate: sizeof(tm_adm) 3994272 (19872)
DpShMCreate: sizeof(wp_ca_adm) 24000 (80)
DpShMCreate: sizeof(appc_ca_adm) 8000 (80)
DpCommTableSize: max/headSize/ftSize/tableSize=500/8/528056/528064
DpShMCreate: sizeof(comm_adm) 528064 (1048)
DpFileTableSize: max/headSize/ftSize/tableSize=0/0/0/0
DpShMCreate: sizeof(file_adm) 0 (72)
DpShMCreate: sizeof(vmc_adm) 0 (1440)
DpShMCreate: sizeof(wall_adm) (38456/34360/64/184)
DpShMCreate: sizeof(gw_adm) 48
DpShMCreate: SHM_DP_ADM_KEY (addr: 073F0040, size: 4661816)
DpShMCreate: allocated sys_adm at 073F0040
DpShMCreate: allocated wp_adm at 073F1E40
DpShMCreate: allocated tm_adm_list at 073F86C0
DpShMCreate: allocated tm_adm at 073F86F0
DpShMCreate: allocated wp_ca_adm at 077C7990
DpShMCreate: allocated appc_ca_adm at 077CD750
DpShMCreate: allocated comm_adm at 077CF690
DpShMCreate: system runs without file table
DpShMCreate: allocated vmc_adm_list at 07850550
DpShMCreate: allocated gw_adm at 07850590
DpShMCreate: system runs without vmc_adm
DpShMCreate: allocated ca_info at 078505C0
DpShMCreate: allocated wall_adm at 078505C8
MBUF state OFF
DpCommInitTable: init table for 500 entries
EmInit: MmSetImplementation( 2 ).
MM global diagnostic options set: 0
<ES> client 0 initializing ....
<ES> InitFreeList
<ES> block size is 1024 kByte.
Using implementation flat
<EsNT> Memory Reset disabled as NT default
<ES> 511 blocks reserved for free list.
ES initialized.
J2EE server info
start = TRUE
state = STARTED
pid = 1632
argv[0] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1351
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=ER1
argv[7] = -DSAPMYNAME=EXXEPT01_ER1_01
argv[8] = -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTED
rdisp/http_min_wait_dia_wp : 1 -> 1
***LOG CPS=> DpLoopInit, ICU ( 3.0 3.0 4.0.1) [dpxxdisp.c 1623]
***LOG Q0K=> DpMsAttach, mscon ( EXXEPT01) [dpxxdisp.c 11586]
DpStartStopMsg: send start message (myname is >EXXEPT01_ER1_01 <)
DpStartStopMsg: start msg sent
CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
CCMS: Initalizing shared memory of size 60000000 for monitoring segment.
CCMS: start to initalize 3.X shared alert area (first segment).
DpMsgAdmin: Set release to 7000, patchlevel 0
MBUF state PREPARED
MBUF component UP
DpMBufHwIdSet: set Hardware-ID
***LOG Q1C=> DpMBufHwIdSet [dpxxmbuf.c 1050]
DpMsgAdmin: Set patchno for this platform to 75
Release check o.K.
Tue Jun 03 10:52:21 2008
DpJ2eeEmergencyShutdown: j2ee state = SHUTDOWN
Tue Jun 03 10:52:41 2008
J2EE server info
start = TRUE
state = STARTED
pid = 2056
argv[0] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[1] = D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
argv[2] = pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[3] = -DSAPSTART=1
argv[4] = -DCONNECT_PORT=1407
argv[5] = -DSAPSYSTEM=01
argv[6] = -DSAPSYSTEMNAME=ER1
argv[7] = -DSAPMYNAME=EXXEPT01_ER1_01
argv[8] = -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
argv[9] = -DFRFC_FALLBACK=ON
argv[10] = -DFRFC_FALLBACK_HOST=localhost
start_lazy = 0
start_control = SAP J2EE startup framework
DpJ2eeStart: j2ee state = STARTEDI found a suspicious log dev_jcontrol, maybe it will do some help.
There's some deadlock at end....
trc file: "D:\usr\sap\ER1\DVEBMGS01\work\dev_jcontrol", trc level: 1, release: "700"
node name : jcontrol
pid : 2612
system name : ER1
system nr. : 01
started at : Tue Jun 03 14:13:53 2008
arguments :
arg[00] : D:\usr\sap\ER1\DVEBMGS01\exe\jcontrol.EXE
arg[01] : pf=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
arg[02] : -DSAPSTART=1
arg[03] : -DCONNECT_PORT=3675
arg[04] : -DSAPSYSTEM=01
arg[05] : -DSAPSYSTEMNAME=ER1
arg[06] : -DSAPMYNAME=EXXEPT01_ER1_01
arg[07] : -DSAPPROFILE=D:\usr\sap\ER1\SYS\profile\ER1_DVEBMGS01_EXXEPT01
arg[08] : -DFRFC_FALLBACK=ON
arg[09] : -DFRFC_FALLBACK_HOST=localhost
[Thr 4756] Tue Jun 03 14:13:53 2008
[Thr 4756] *** WARNING => INFO: Unknown property [instance.box.number=ER1DVEBMGS01exxept01] [jstartxx.c 841]
[Thr 4756] *** WARNING => INFO: Unknown property [instance.en.host=EXXEPT01] [jstartxx.c 841]
[Thr 4756] *** WARNING => INFO: Unknown property [instance.en.port=3202] [jstartxx.c 841]
[Thr 4756] *** WARNING => INFO: Unknown property [instance.system.id=1] [jstartxx.c 841]
JStartupReadInstanceProperties: read instance properties [D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties;D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties]
-> ms host : EXXEPT01
-> ms port : 3902
-> OS libs : D:\usr\sap\ER1\DVEBMGS01\j2ee\os_libs
-> Admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Used property files
-> files [00] : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> files [01] : D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
Instance properties
-> ms host : EXXEPT01
-> ms port : 3902
-> os libs : D:\usr\sap\ER1\DVEBMGS01\j2ee\os_libs
-> admin URL :
-> run mode : NORMAL
-> run action : NONE
-> enabled : yes
Bootstrap nodes
-> [00] bootstrap : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] bootstrap_ID11381200 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] bootstrap_ID11381250 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
Worker nodes
-> [00] ID11381200 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [01] ID11381250 : D:\usr\sap\ER1\DVEBMGS01\j2ee\cluster\instance.properties
-> [02] sdm : D:\usr\sap\ER1\DVEBMGS01\SDM\program\config\sdm_jstartup.properties
[Thr 4756] *** WARNING => JsfOpenShm: ShmCreate (69, 295952, CREATE) failed(rc = 4 SHM segment already exists) [jsfxxshm.c 715]
[Thr 4756] *** ERROR => JsfOpenShm: Shm version mismatch (shm "JSF-ADM-CORRUPT", code "JSF-ADM-015") [jsfxxshm.c 761]
[Thr 4756] *** ERROR => Can't create shared memory segment 69 (rc = 8) [jcntrxx.c 1714]
[Thr 4756] *** ERROR => Can't initialize JControl Administration [jcntrxx.c 271]
[Thr 4756] JControlCloseProgram: started (exitcode = -1)
[Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(SESSION) failed (rc = 6 invalid argument) [jsfxxshm.c 1243]
[Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(ALIAS) failed (rc = 6 invalid argument) [jsfxxshm.c 1250]
[Thr 4756] *** ERROR => JsfCloseShm: FiDetachIndex(SERVICE) failed (rc = 6 invalid argument) [jsfxxshm.c 1257]
[Thr 4756] JControlCloseProgram: good bye... (exitcode = -1)
[Thr 3152] Tue Jun 03 14:22:52 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 14:37:56 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 14:53:01 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 15:08:05 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
[Thr 3152] Tue Jun 03 15:23:09 2008
[Thr 3152] WARNING: MtxLock 02550988 JSF-PROC -2 deadlock ?
Maybe you are looking for
-
Error occurred during exporting ssrs report as pdf
an error occurred during local report processing. Object reference not set to an instance of an object Thanks in advance
-
PLEASE Help!!! - G4 keeps crashing on me!
this has never happened to me with my mac before so i really dont know what to do! i boot up and sometimes it runs fine for about 20 minutes before it freezes up and crashes! then i re-boot and sometimes it runs fine but most of the time it doesnt re
-
Iphone 4 won't open after installing ios 7.1
Please help. My iphone 4 won't open after installing ios 7.1.. I already connected it to my pc but still didn't open. I waited for a long time, press the on/off, home buttons but still didn't work. Thanks Jah bless all..
-
I purchased an app called camcorder pro which it says was compatible with my iPad I can't get it to open or do anything any suggestions.. My ipad has no camera on it I thought this app made a camera lens...Please help me fix or let me no how can I ge
-
Imovie 11 crashes when i choose 'import from camera'.
suddenly, imovie 11 9.0.4 crashes when i choose 'import from camera'. never happened before, always worked fine. driving me crazy! can anyone help? i tried to delete the plists, did disk permissions, etc etc. am running 10.6.8, haven't changed anythi