Howto disable the firewall in AEBS Airport Extreme Base Station

Is there any way to do that?
Motivation: I don't want to reroute ports to a DHCP address which changes constantly. Plus: Editing the port reroute list is a pain!
I have no problems with my Asus WL500gP but this thing just doesn't get printing right while all the other funktions work flawlessly.
AEBS plus: Canon ip3000 works perfect over WLAN
AEBS minus: All services relying on ports being redirected are blocked
I have a firewall in my mac which I can switch on and allow services to whatever I want, for the Airport Extreme Base Station, this simply does not work. If I donwload a new Ubuntu torrent with the Asus it's yipiiee, with the AEBS it's 0KB/s. Great.

The only way to disable the "firewall" is to configure the AEBS to act as a bridge. In that mode it is not providing local IP addresses for local machines.
Motivation: I don't want to reroute ports to a DHCP address which changes constantly. Plus: Editing the port reroute list is a pain!
You can configure the AEBS to use DHCP. You can give one of your computers a static IP address outside the range used by the AEBS's DHCP server. Then you can configure the AEBS to recognize that computer as default host (thing DMZ) or you can forward selected ports only to that computer. Once configured you won't need to change anything since that computer is at a static IP address.

Similar Messages

How to disable the wireless section of Airport Extreme Base Station?

Is it possible to disable the wireless section of Airport Extreme Base Station?
It is because I do not want to have any high frequency radio signal which may be dangerous for small baby (no such proof for the moment, however).
Anyone using the new Airport Extreme Base Station please check and help.
Thanks!!

I think you are a little too concerned. Just for the sake of how to, here it is.
go to manual set up, airport, wireless, wireless mode, and then choose off.
good luck.

Why does the new Dual-Band AirPort Extreme Base Station act as a proxy?

The previous thread
http://discussions.apple.com/thread.jspa?threadID=1531675
has been archived and nothing came of it, but after testing, I'm certain that their findings are true.
The Dual-Band AirPort Extreme Base Station (AEBS) with firmware 7.4.1 acts as a proxy for TCP ports 21, 554, and 7070 when NAT is turned on. This can be verified by using Nmap on any external server known to NOT have the ports open and having Nmap return that the ports are open. You can telnet to these ports to verify that they're "open," even though they are not on the server.
This functionality appears to be undocumented and as far as I can tell, the only way to turn it off is to put the AEBS into bridge mode and having some other device do NAT further upstream.
As a computer professional, this functionality extremely undesirable, particularly since it is not documented and doesn't have an "off switch." I wasted a bunch of time with one of my network engineers because of this, thinking that some network router was spoofing our server. I also wasted a bunch of my time trying to detect whatever "stealthy rootkit" had opened a FTP server and some other botnet related ports on our server, when in reality, it was simply my AEBS tricking me.
Disabling NAT-PMP ("Enable NAT port mapping protocol") does not affect this.
Is it too much to ask to have a checkbox in the "Advanced" section of the AirPort Utility to turn this feature off?

Welcome to the discussions forum Michael Bennett2.
Thanks for investigating this odd behavior.
If you want your work to be noticed by those who can effect change, you'll have to tell Apple via their feedback link. It won't do any good to post it here.
http://www.apple.com/feedback/

I cannot access my network printer under AEBS(Airport Extreme Base Station)

The current network configuration of me is
1. AEBS have static IP address. (e.g., 154.123.12.54)
2. Network printer in my office have static IP address. (e.g., 154.123.12.55)
3. My iMac is connected to AEBS. And have virtual IP address. (e.g., 10.0.1.201)
The problem is that when I trying to add my network printer on my iMac,
it works. I can find my network printer in the list.
But when I trying to print with that printer, I think any packet is not sent to network printer.
I think AEBS block them.
How can I use my network printer under AEBS?
I didn't have any problem with my Belkin wireless router.

When you can, take a look at the old AirPort Express and locate the model number in the faint print on the side of the device.
If you see A1084 or A1088, this is an older Express version that is no longer supported by the current version of AirPort Utility that you are using with the new AirPort Extreme.
If that is the case, your Express is at least 6 years old...probably older...so it is about time to treat yourself to a new version with much faster speeds and more features.

How to disable Ethernet Port on 2003 Airport Extreme Base Station

I have a roommate who does not help with the cable bill. He is always plugging his computer into the ethernet port of the Airport base station (no wireless card in his computer). The Base Station sit on top of the cable box in the living where its plugged directly into the cable box for internet access. Unfortunately moving the cable box or base station is not an option. How do I disable the ethernet port or prevent him from having access to the base staion?

+How do I disable the ethernet port or prevent him from having access to the base staion?+
You could prevent him from connecting using wireless, but not ethernet.
On second thought, you could hide his ethernet cable. For a permanent solution, you could always fill the ports with glue, but would probably regret it at some point.

I have an old airport that still works, can you use it the same way that one uses an airport express to extend the range of an airport extreme base station?

It would save me a few bucks if I could use an old airport that I have to extend the range of a new airport extreme. My concept would simply be to use the old Airport the same way I would use a newer Airport Express as a slave repeater. Is this doable?

Both the new AirPort Extreme and older AirPort Express will have to be configured using Apple's WDS settings to provide more wireless coverage.
Here are the downsides:
WDS operates only at "g" wireless speeds, so you will lose all of the faster "n" wireless capability of the new AirPort Extreme
WDS cuts the bandwidth on the entire network in half, so you will have a "g" wireless network running at half speed.
WDS is difficult for most users to configure because it is easy to make a mistake and hard to recover without starting all over again
Bottom line......Saving a few bucks will be very costly in terms of performance on your network.

How do I find the password to my airport extreme base station?

I have a flashing yellow leght on the base station and when I try to find out which one I have it asks for a password. I don't remember assigning one but it won't let me in.

Launch Keychain Access located in HD > Applications > Utilities
Select passwords on the left.
Type base station in the search field top right corner of the window.
Now double click that keychain then select the Attributes tab.
Select the box next to: Show Password
You may be prompted for your admin password before proceeding.
Now open AirPort Utility located in the same Utilities folder. Select the base stattion on the left then click Manual Setup.
Select AirPort from the menu at the top of that window then select the Base Station tab.
Type in the correct password then select: Remember this password in my keychain then click Update.

RANT: Why is there no power button on the Airport Extreme Base Station?

I know there is no solution to this until Apple updates the next generation of Airport Extrem Base Stations; hopefully they'll add a POWER BUTTON to it.
I like to turn off my base station when I'm not at home and the only choice I have is to pull the plug out of the back. Why? Two reasons: cut down on my energy bill and SECURITY.
Not that it really uses much energy, but I'm doing the environmental thing here. And my network is password protected, but I just feel more comfortable having it turned off when I'm not there.
So, does anybody feel the same as me about this?
PowerBook G4 Mac OS X (10.4.5) My first Mac was a IIcx. Those were the days!

Really an airport
being tunred off for the time you dont use it isnt
going to save the environment that much I am sure
there are plenty of environmental accidents that ruin
your hundreds of hours of energy use over the years
in mere seconds.
I'm not just thinking of myself when I speak of the environment and energy use. If everyone that has an Airport Network at home turned it off when they were not at home, I think it would make a significant difference. People need to think nore of their impact on the world instead of viewing just their one little piece of it.
It's like the people who leave their desktop computers and monitors on all the time. Turn the friggin' things off if you're not there and if it's not performing any function. Those devices are just eating up energy.
PowerBook G4 Mac OS X (10.4.5) My first Mac was a IIcx. Those were the days!

Printer that works with Airport Extreme Base Station

Hi. We are very new to Macs (2 weeks). Have a Mac Book and AEBS. Both work fine. Our HP printers, however, only work if connected directly to the Mac Book. I'm informed that we need to get a printer that works with the AEBS if we wish to have wireless printing. If anyone can recommend a printer that works with AEBS, we'd be grateful. Thanks.

Hello Jungle-cat. Welcome to the Apple Discussions!
Check out the following iFelix site to see which printers are known to work (not not) with the new 802.11n AirPort Extreme Base Station (AEBSn).

Magic Packets with AirPort Extreme base station

Ok, so I would like to be able to wake my iMac with magic packets over the internet. It is connected to the internet via an AirPort Extreme base station, and I know that it won't work over wireless networks, but the iMac is connected and gets internet via ethernet from the AirPort. Is there any way I can set up port forwarding or something like that to wake my iMac remotely?

...should I have AirPort on my iMac turned off or on...
Since you are connected via Ethernet you would turn AirPort off.
Does the connection automatically default to Ethernet, even if AirPort is set "on," because presumably Ethernet is faster.
No. It gives priority based on how they are ordered in the list of network connections.

I have a AirPort Extreme Base Station with Gigabit Ethernet 802.11n ?

I have the 802.11n Airport Extreme Base it went bad so Apple Sent me a new one to put into my
office where I have a iMac 24" 2.4ghz with really fast internet
I also HAD a AirPort Express Base Station with 802.11g and AirTunes G not N so when I received the
new 802.11n Airport Extreme I sold the Airport Express 802.11g now my Macbook Pro 17" 2.33mhz
which is in my family room and that is also where the Airport Express with iTunes was located
now my internet is like really slow on the MBP 17" I have 5 bars in the pizza menu bar but my
internet speed is really BAD on the MBP 17" and I have 16mg speed on the net
+BIG ? DO I NEED TO BUY A 802.11n AirPort Express Base Station with 802.11n and AirTunes??????+
TO EXTEND THE RANGE OF MY AirPort Extreme Base Station with Gigabit Ethernet Which is in my
Office where my iMac 24" 2.4ghz is located and the internet zooms on the iMac but not my
my Macbook Pro 17"
Please help as I don't want to spend money on another 802.11n if it will not extend
I
Message was edited by: macman60

So you agree to the lose of the Airport Express removal has caused me to lose enough of a signal to make the Internet...
Sorry but I'm not sure what this long run-on sentence is trying to say.
You asked if the network could be wirelessly extended and that is what I replied to.

AirPort, older AirPort Extreme Base Station, AirPort Express, Newer AirPort Extreme Base Station

This may sound like a fairly dumb question, but here goes anyway:
I have a 27" iMac with the following AirPort Extreme card:
Card Type: AirPort Extreme (0x168C, 0x8F)
Firmware Version: Atheros 9280: 2.1.14.6
For a Base Station, I'm currently using a pretty long-in-the-tooth M8799LL/A AirPort Extreme Base Station (with modem and antenna port)
I recently bought an Airport Express:
AirPort Express MB321LL/A (A1264) to
A. Use AirTunes to send iTunes from my Man Cave on the first floor at one end of the house to the family room on the first floor at the other, where it will connect to an A/V setup, and, probably, one of my USB printers
B. Act as a repeater for the AirPort Extreme Base Station, which is physically closer to the Man Cave than to the family room. My wife and I use our ancient-but-hangin'-in-there iBook G4s in the family room (and upstairs) to check email, eBay, etc. Both in the family room and especially upstairs, we sometimes get only 2-3 bars on the AirPort signal strength indicator in the menu bar.
I see that I can get, from a well-known third-party retailer, an AirPort Extreme 802.11n A1143 (1st Generation), for an exceptionally reasonable price.
My question is, what would getting the AirPort Extreme 802.11n A1143 do for me, if anything? I know it would give me one more signal source in the repeater chain, and I could probably put the Auld Nyle M8799LL/A in the stairway or upstairs to boost the signal upstairs, and I could use the USB port in the AirPort Extreme A1143 for connecting another USB printer or USB external hard drive (would this drive be available to any Mac on the AirPort network?)
Any other configuration possibilities and suggestions greatly appreciated!
Peace & Love
Bart Brown

Thank you for the prompt reply and the very helpful links. I'm going through all the support docs right now, but from your explanation and what I've seen in the support docs so far, it would appear that the maximum bandwidth is achieved by a physically-connected "Roaming Network."
I'm so out of it, I'm afraid I'd never heard of "Powerline adapters," but I looked them up, and I guess this is the system that uses "Romex" - style standard house wiring to carry signal, which cuts down on each individual Base Station's power overhead (does it also affect bandwidth?).
I see a lot of names selling these adapters -- Western, D-Link, NETGEAR, ZyXEL, Monster, Sling Media, PowerNet, Cisco-Linksys, Actiontec, Medialink, Rosewill, TRENDnet -- and a lot of different configurations: 1 port, 2 ports, 4 ports. Basically I have one 27" iMac that doesn't go anywhere (it's not too portable!), a couple iBook G4s, and a point where I want to run 1/8" mini-jack-to-RCA L/R audio cable from the AirPort Express to an A/V receiver. I doubt this configuration is going to change, as I'm 63, and too lazy to lug stuff around if I don't have to. What do you think would be the best solution for me, considering I just ordered the AEBSn and I already have a brand-new AXn. Should the 27" iMac, since it ain't movin', be connected by ethernet/"Powerline adapter", rather than relying on the internal Airport Extreme card? I guess what I'm asking is, given what I want to do, how many of these Powerline adapters, what kind (do you recommend), with how many ethernet ports do I need?
Thank you again for your prompt and informed help.
Bart Brown

Comcast HSI, AirPort Extreme Base Station issues

Recently, I've been having some connection issues with my Comcast High-Speed Internet and my AirPort Extreme Base Station. I'll be connected fine one minute, and the next my AirPort monitor drops to 2 bars of signal and nothing will connect. Resetting the base station and the modem works about 50% of the time, while just sitting here "dealing with it" works the other half of the time.
I rent my cable modem from Comcast, and I believe it is the Terayon TJ715. I went to the Apple Store San Francisco and had my base station replaced, thinking it was the culprit, but alas, the problem is continuing, only less frequently.
I've replaced all my ethernet cables, tried it with my AirPort Express (which works more often, yet has the same problem occasionally), yet my connection uptime and signal still drops to 2 bars and essentially disconnects.
Even stranger, the computer I have connected to the LAN port seems to work fine even when the computers connecting wirelessly are having issues.
I'm going down to a Comcast Support Center on Friday to (hopefully) replace my modem with a newer model (someone told me that older Comcast modems "kill" AirPort Base Stations), but other than that, any ideas? Anyone have this type of issue with Comcast in the past?
The 3 machines im running are:
Dual-Core 2.3Ghz Power Mac G5 via AirPort
867MHz PowerBook G4 (Titanium) via AirPort
800MHz iMac G4 (Flat-Panel) via Ethernet
Thanks,
Alexis
Dual-Core 2.3GHz Power Mac G5 Mac OS X (10.4.3)

Don,
Thank you for the link. However, it did not seem to solve my issue.
It's not that I haven't been able to connect to the internet at all using wireless. I will be connected fine (all 3 computers connecting to the internet simultaniously) when suddenly, any machine connected via AirPort (specifically my Dual-Core Power Mac G5) will receive two bars of signal and will no longer connect to the internet. The only remedy I've found is to reset both the cable modem and AirPort Extreme Base Station, and this only works about 50% of the time.
I am going to have Comcast replace the modem (and in the meantime, get new Ethernet cables) tomorrow, so hopefully I won't be having this issue anymore, but I'm more curious what may be causing the issue. Have you heard anything about older Comcast modems causing latency issues with AirPort Extreme Base Stations?
Thanks again,
Alexis

Registering New Airport Extreme Base Station

I tried registering my new Airport Extreme Base Station, but the following statement keeps coming up:
We could not recognize the serial number you entered. Please re-enter it, making sure each letter or number is correct.
I have double checked the serial number several times on the bottom of my Airport Extreme Base Station and I still get the same message when I enter it on Apple’s site.
Does anyone know how to contact Apple by e-mail about this? I can find no e-mail contact information for this on their support site.
Thanks

Does anyone know how to contact Apple by e-mail about this? I can find no e-mail contact information for this on their support site.
I'm sorry, but I don't believe Apple provides support via email, only call-in or directly by visiting the Apple Stores or Apple-Authorized Dealers.
(ref: http://www.apple.com/support/contact/)

How do I open the same ports on an Airport Extreme Base Station for multiple computers at the same time?

As the title suggests...
I have a mix of five Mac and PC's at home using an Airport Extreme Base Station as the router.   I need many ports opened on the AEBS for all of the computers- not just one computer. (for example: three people want to play TF2 on Steam at the same time; each machine needs the correct ports open on the router).   Port forwarding only allows me to forward a given port to a single IP, yet I need that port open for five differnt IP's, all at the same time.
How do I do that on an AEBS?
In the same way, I have a small office of four iMacs using an old airport with the same exact issue.   I would like to be able to connect to all of them remotely with Apple Remote Desktop, but the port forwarding on the airport only allows a port to forward to a single IP.   I want to be able to tunnel into the office network and log onto any machine behind the Airport extreme... not just a single IP.    I currently have it set up where I can tunnel into the office from my house, I can find the one machine that the port forwarding has been assigned to, I can log on and everything is just fine... with one machine.    How do I open the firewall for the other machines?
TL,DR version: How do you open ports on an Airport Extreme Base Station instead of forwarding ports?   Forwarding ports doesn't work for multiple IP's.

You can open a single or multiple ports to a single device or different ports to different devices, but you cannot open the same port to multiple devices via the AirPort Utility for the Apple routers.

Howto disable the firewall in AEBS Airport Extreme Base Station

Similar Messages

Maybe you are looking for