Howto Export and Import CAF project
Hi,
Is there a way to export and import my CAF projects to more than one installations of NWDS? I've tried different ways but the main problem is that I can't see the "imported" projects in the Composite Application Explorer of the CAF perspective in NWDS.
The only way I've managed to do this is to create a new CAF project with the same name as the one I want to import and copy all files into the newly created structure but surely there must be an easier way to do this, or??
Best regards,
Mikael
Does this solution still apply?
I want to export a CAF project from NWDS 7.10 and import it into NWDS 7.20.
If there are any breaking API-changes, this is no problem as I can fix it later.
However I need to transport all BO and Service-Definitions and the (possibly outdated/deprecated) code.
I cant get it working with your linked document.
Any hint appreciated. Thanks alot!
Kai
Similar Messages
-
Howto export and import SLD data to different SLD's
Hi All,
I have a landcape with 4 SLD's. A central SLD within Solution Manager and 3 SLD's for resp. XI dev,qas,prd.
The central SLD is version 7.0 and the XI versions are 2.2. (model versions are the same, CR are different -> XI SAP_CR 2.18 -> Solman SAP_CR 2.0)
The idea is that all changes in Bussiness (including new products and software components) and Technical Systems take place in the Solution Manager. After a change we make an export and import it into XI dev, qas and so on.
However....
When adding, for example, an exsisting product to a technical system, export it on Solman and import it into XI dev, all entries dissapear(sapms/host/clients).
We filled Solman with a full export of XI development and that worked fine.
Does anybody has an idea about actions to be taken?
Thanks,
Sjoerd LubbersHi All,
I have a landcape with 4 SLD's. A central SLD within Solution Manager and 3 SLD's for resp. XI dev,qas,prd.
The central SLD is version 7.0 and the XI versions are 2.2. (model versions are the same, CR are different -> XI SAP_CR 2.18 -> Solman SAP_CR 2.0)
The idea is that all changes in Bussiness (including new products and software components) and Technical Systems take place in the Solution Manager. After a change we make an export and import it into XI dev, qas and so on.
However....
When adding, for example, an exsisting product to a technical system, export it on Solman and import it into XI dev, all entries dissapear(sapms/host/clients).
We filled Solman with a full export of XI development and that worked fine.
Does anybody has an idea about actions to be taken?
Thanks,
Sjoerd Lubbers -
Export and import imovie project between two mac- Help
Hi,
I am working on a imovie project in my Macbook and now want to transfer the unfinished project to my friend's Macbook so he can edit and add some songs.
What I did was click "Export Movie" and then save the movie to my destop- formated - name.m4v, draged the saved movie file to USB and transfer to my friend's Macbook. To import the file into iMovie in his labtop, I created a new project and just drag the file into the event library.
It turned out that I imported a movie vedio instead of a project and I couldn't edit it like I did in my Mac. (add things inbetween clips, change photos, change sounds, music, transitioning etc)
Is there any way in which I can transfer the iMovie project to another macbook, not appear as a vedio but will appear as a project when I actually continue work on it like I did in the original Macbook?
Thank you.Moving Event's and Project's
Hi
Moving Event's and Project's
Connection - Either connect one Mac in Target mode to the other via FireWire. Or use an external hard disk !
(Target-Mode - Start one Mac e.g. laptop - BUT keep T-key down during full up-start - Now a FW-symbol is jumping around the screen and it will work as an external hard disk when connected to the other Mac)
A. The External Hard Disk - MUST BE - Mac OS Extended (hfs) formatted to work for Video. UNIX/DOS/FAT32/Mac OS Exchange works for most other things but not for Video whatever program is used (iMovie or FinalCut)
B. Should be a FireWire one as USB/USB2 performs badly to me and especially when filling up
C. Do never Move or Alter any folder named
• iMovie Event's - or -
• iMovie Project's
on DeskTop/Finder - as this will result in iMovie losing connections to them and repair can be anything from hard to impossibly
D. Moving and Copying must be done within iMovie application and Events to Events - and - Project's to Project's.
E. Moving Project's to Event's - Do not work for me - I have to export project as a QuickTime movie then Import this into Events.
Event's window can show two faces
Like this
or like this
from one hard disk Event - You can move it to the other hard disk
You can not (at least not me) move Event to Project or other way around only
Event to Event and Project to Project
Yours Bengt W -
How to export and Import MDS project into Oracle EM console
Hi all ,
we have created a MDS project in dev environment , i need to deploy same project in to Test environment.please some one provide inputs to me .For deploying the project in to the server, following are the ways to do that...
1. through JDeveloper
2. Ant Scripts
3. WLST Scripts
4. through EM Console
And if understand your Question correctly, keep your MDS artifacts in the test environment and create the jar file and SOA Bundle and deploy to the test server...
Thanks,
N -
I am using Iphoto 11 ver 9.4.3 on mac using oxs 10.8.5 i want to export calendar projects to an external hard drive. my goal is to store them in an external hard drive so it doesn't use up memory on the mac hard drive. is it possible to copy the specific projects without copying the entire library? what is the easiest way to do this? i have tried export and import but it didn't seem to work.
What do you not understand?
You can duplicate the iPhoto library (command - D ) and delete everything except the project and its photos from the copy and move that
Or
However the calendar takes very little space - it is simpy database entries - it is the photos in the calendar that take space - and for most people you would wnat to keep those photos in your library
you can use a photo in 50 calendars and it still is only one photo in your library - as I explained calenders do not exist as such - they are simply database entries telling iPhotop how to display the calendar - they take almost no space at all
LN -
Export and Import of mappings/process flows etc
Hi,
We have a single repository with multiple projects for DEV/UAT and PROD of the same logical project. This is a nightmare for controlling releases to PROD and in fact we have a corrupt repository as a result I suspect. I plan to split the repository into 3 separate databases so that we have a design repos for DEV/UAT and PROD. Controlling code migrations between these I plan to use the metadata export and subsequent import into UAT and then PROD once tested. I have used this successfully before on a project but am worried about inherent bugs with metadata export/imports (been bitten before with Oracle Portal). So can anyone advise what pitfalls there may be with this approach, and in particular if anyone has experienced loss of metadata between export and import. We have a complex warehouse with hundreds of mappings, process flows, sqlldr flatfile loads etc. I have experienced process flow imports that seem to lose their links to the mappings they encapsulate.
Thanks for any comments,
BrandonThis should do the trick for you as it looks for "PARALLEL" therefore it only removes the APPEND PARALLEL Hint and leaves other Hints as is....
#set current location
set path "C:/TMP"
# Project parameters
set root "/MY_PROJECT"
set one_Module "MY_MODULE"
set object "MAPPINGS"
set path "C:/TMP
# OMBPLUS and tcl related parameters
set action "remove_parallel"
set datetime [clock format [clock seconds] -format %Y%m%d_%H%M%S]
set timestamp [clock format [clock seconds] -format %Y%m%d-%H:%M:%S]
set ext ".log"
set sep "_"
set ombplus "OMBplus"
set omblogname $path/$one_Module$sep$object$sep$datetime$sep$ombplus$ext
set OMBLOG $omblogname
set logname $path/$one_Module$sep$object$sep$datetime$ext
set log_file [open $logname w]
set word "PARALLEL"
set i 0
#Connect to OWB Repository
OMBCONNECT .... your connect tring
#Ignores errors that occur in any command that is part of a script and moves to the next command in the script.
set OMBCONTINUE_ON_ERROR ON
OMBCC "'$root/$one_Module'";
#Searching Mappings for Parallel in source View operators
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Searching for Loading/Extraction Operators set at Parallel";
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Searching for Loading/Extraction Operators set at Parallel";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
foreach mapName [OMBLIST MAPPINGS] {
foreach opName [OMBRETRIEVE MAPPING '$mapName' GET TABLE OPERATORS] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT)] {
if { [ regexp $word $prop1] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET DIMENSION OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET CUBE OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
foreach opName [ OMBRETRIEVE MAPPING '$mapName' GET VIEW OPERATORS ] {
foreach prop1 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (LOADING_HINT) ] {
if {[regexp $word $prop1] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Loading Operator: $opName, Property: $prop1"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (LOADING_HINT) VALUES ('');
OMBCOMMIT;
foreach prop2 [OMBRETRIEVE MAPPING '$mapName' OPERATOR '$opName' GET PROPERTIES (EXTRACTION_HINT) ] {
if {[regexp $word $prop2] == 1 } {
incr i
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Mapping: $mapName, Extraction Operator: $opName, Property: $prop2"
OMBALTER MAPPING '$mapName' MODIFY OPERATOR '$opName' SET PROPERTIES (EXTRACTION_HINT) VALUES ('');
OMBCOMMIT;
if { $i == 0 } {
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Not found any Loading/Extraction Operators set at Parallel";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Not found any Loading/Extraction Operators set at Parallel";
} else {
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
puts "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Fixed $i Loading/Extraction Operators set at Parallel";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Module: $one_Module, Object_type: Mapping";
puts $log_file "[clock format [clock seconds] -format "%Y%m%d %H:%M:%S"] --> Fixed $i Loading/Extraction Operators set at Parallel";
close $log_file;
Enjoy!
Michel -
Calling Oracle Export and Import in java
Hi,
I am trying to call oracle export and import utilites in my java application,
can anyone help me that how can i do this, plz consider the case as this is a part of my project..
Regards
AshishYou should just be able to call the "imp" and "exp" executables ($ORACLE_HOME/bin) using the Runtime class. You can setup the various parameters for export / import in a parameter file.
http://www.javaworld.com/javaworld/jw-12-2000/jw-1229-traps.html
http://www.orafaq.com/faqiexp.htm -
Export and import Oracle 10G database
Hello all
Can anyone tell me once for all how can i backup oracle 10G database and restore it in other computer (export and import)
thanks alot
RonDo you can access to metalink?
If not, I copy an paste this doc's....
Doc ID: Note:10767.1
Subject: How to perform FULL System Export/Imports
Type: BULLETIN
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 18-APR-1994
Last Revision Date: 30-AUG-2002
Purpose
This article highlights some important points to consider when performing
a Full System Export and Import.
Scope and Application
It is intended to assist users performing FULL System Exports and Imports.
A Full System Export and Import is a useful way to replicate or clean up
a database. Please note the following guidelines when performing a Full
System Export and Import:
1. When performing the import, ensure you are pointing at the correct
instance. Always check values for the SID and two task driver before
proceeding.
*Note: On Unix systems, just entering a sub-shell, such as using
C-shell, can change the database that the import would work
against.
2. When possible, it is advisable to take a physical copy of the
exported database and the database you intend to import into before
starting the import. This ensures any mistakes are reversible.
3. NEVER run a FULL SYSTEM IMPORT on a machine that has more than one
database UNLESS you are 100% sure all tablespaces have been
pre-created. A full import will create any undefined tablespaces
using the same datafile names as the exported database. There are
situations where this is very dangerous:
-> If the datafiles belong to ANY other database, they will be
CORRUPTED. This is especially true if the exported database is
on the same machine, because its datafiles will be re-used by
the database you are importing into.
-> If the datafiles have names that clash with existing operating
system files.
4. When exporting, it is advisable to also produce a report showing
information you may need before / after the import:
-> List the tablespaces and datafiles
-> List the rollback segments
-> List a count, by user, of each object type such as tables,
indexes, etc.
This enables you to ensure that tablespaces have been pre-created
and to check the success of the import after it is complete.
5. If you are creating a completely new database from an export, remember
to create an extra rollback segment in SYSTEM, and make this available
in the init.ora file before proceeding with the import.
6. There are some versions of export that do not retain sequence numbers
correctly. It is advisable to select next_value for each sequence
after the export so that these can be checked after import.
Following these guidelines will help you to avoid major problems.
Doc ID: Note:174226.1
Subject: How To Copy an Oracle Database To Another Machine
Type: HOWTO
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 12-OCT-2001
Last Revision Date: 01-OCT-2003
goal: How to copy an Oracle database to another machine
fact: Oracle Server - Enterprise Edition
fix:
Pre-requisites: The copy is between 2 machines, both have to be on the same OS
and have to have exactly the same database version installed.
1. Make sure the database you want to copy was closed with a SHUTDOWN IMMEDIATE,
SHUTDOWN NORMAL or SHUTDOWN TRANSACTIONAL.
2. Copy init.ora and control files to create instance and be able to go in
mount mode. Check the init.ora for the locations where the controlfiles have
to be, if those locations are not valid on the machine put the control files on
different places and adjust the init.ora accordingly.
3.a. Copy the datafiles (all of them).
b. Copy the redo-logfiles (all of them).
4.a. (Unix only) Set the environment variables:
ORACLE_SID - set to the database name you wish to create
ORACLE_HOME - set to full pathname of the Oracle system home directory
PATH - needs to include $ORACLE_HOME/bin
b. (NT/2000 only) Do 'set ORACLE_SID=<SID>'
Use oradim to create the service for the instance. For more information
on oradim please refer to (the part that refers to creating a new instance):
Note:68720.1 Creating a new 7.3, 8.0, 8.1 Instance/Database
5. Use servermanager (check the name to use for your version of oracle) or
sqlplus (version 9i and above) to startup the database in mount mode.
Do
CONNECT INTERNAL/<PASSWORD>
then
STARTUP MOUNT
Then do a rename of the copied datafiles if they are not in the same path as on
the other machine. For all the files that are in the result of the query:
SELECT NAME FROM V$DATAFILE;
do
ALTER DATABASE RENAME FILE '<oldfullpath>\<filename>' to <
newfullpath>\<filename>';
6. Query the datadictionary for the old location of the redolog files using:
SELECT MEMBER FROM V$LOGFILE;
If the new place is not the same as the old do:
ALTER DATABASE RENAME FILE '<oldfullpath>\<redologfilename>' to &
lt;newfullpath>\<redologfilename>';
7. Now open the database:
ALTER DATBASE OPEN;
****************************************************************** -
Is it possible to export and import jsf page and application module?
Hi,
I want to export a application module and then import it to another application,so deos jsf pages.If I can do this ,then my team could do the diffent work at the same time.one group response for data model then commit as application module,one group for page create and edit and so on .Who has any good idea?
Thanks advance
lixinzhu
2007/09/19hi,frank
thank you.
You know a page include a .jspx file,a page definition file and depend faces-config.xml,faces-config.oxd_faces and other I don't know information,so if i only put the first two file into cvs,but how can i get other information in the last two file?When I get the first two file and needed information in the other file,how can i merge these into new project and let jdeveloper "reconize it"?Applicaion is more complex,it not only depend its self java class,xml and many entity object and view object,how to handle the "export" and "import" process?Just like oracle form,only a fmb is enough,database object only need to "put into database","export" and "import" are very simple,so i need jdeveloper to supply these "import" and "export" function.I'm not familar with cvs,does it can know object dependency like application module?if it can,how to let jdev "reconize" imported in object?
lixinzhu
2007/09/19 -
EDL Exporting and Importing 101 - Questions
We are testing Premiere's EDL exporting and importing capabilities for the first time, and are having issues. We set up a very simple test project with only 13 clips and a timeline with only 10 edits. This is what it looks like:
http://img819.imageshack.us/img819/760/j00s.jpg
We then exported an EDL, started a new Premiere project, and imported the EDL that we had created. It looks like this:
http://imageshack.us/scaled/landing/32/6hd9.jpg
In the bin, Premiere has now turned our 13 clips into 41. There are a lot of duplicates, some of them appear to be audio files, even though they're still listed as .mxf, and the start and end times are all over the place. Our two questions are: Why is it making all of these clips? And how do you link the media? We started linking some media manually, but because the start and end times are scrambled, the edits appear completely wrong in the sequence that we've created.There are a variety of options offered when exporting an EDL.
These options need to be considered in conjunction with how the Sequence (audio/video layers) are set up. (managed for the edl export)
Source footage management is vital in any EDL workflow and even more so when digital clip based ( as opposed to tape based linear assets). ie. Digital clips have "unusual" filenames and are buried deep in folder structures. Filenames can be duplicated in a card to cards system. (mxf would be an exception)
The EDL is usually used between systems.
In your case you are testing on the same system and assumeably the source footage resides there as well. This is a case for managing the "source" so as the links work.
Example. When I take footage to a Resolve Suite out of house. I set up all the source footage on an transfer drive in the same manner ( filenames, folder names etc) as the original local drive . -
How to export and import template and dimensions mumbers between 2 appset
hi expert:
1.How to export and import template and dimensions mumbers between two application set
2. In Our project Requirement ,
we moust be develop our planning in develop evn application set , distribute template and
dimension mumbers to another Qas applications set .
3. how can i package our template in dev application set and Anti-package to Qas application set
with BPC system tools?
4. This Requirement is from our Security control Dep. we must be change template version or dimension
mumber with system tools.
5.thanks for your help!Ian,
So, in other words, you're saying that it's not possible to export directly objects (like smart albums) that reside outside of projects?
I know, for example, you can "export" anything created inside a folder by dragging and dropping the folder to another library; but you then have to rebuild the library to get the new folder and its contents to be recognized. For my library, this takes too much time to do. -
How to export and import the lsmw
Hi Friends,
How to export and import the objects in lsmw
from dev to qas(quality) systems........
its urgent.........
regards,
venu.best way is to create a transport and move it to other enviroments
There are two ways of Transporting for this. Can choose any one.
Goto the LSMW Transaction
1)Extras>Export Projects>(Give the Project name)
In next screen(Choose what subproject, routines, etc.. you wan to copy then, Export Rules-->Export((Will prompt for file name)
A text file will be downloaded.
In the Target System
Goto LSMW Extras-->Import Projects and give the text file which was downloaded.
2)Extras-->Generate Change Request
Assign a change request which is basically a transport request and you can then get this transported from one system to another through the basis route. -
Hi all,
How i do to export and import ADF-BC, of one project to other ?
Thank's
AlexandreHi,
may be this thread helps:
Linking two projects
Timo -
Possible to convert Raw to JPEG without exporting and importing?
I have about 4,500 raw photos that I need to print on contact sheets (or print contact sheets to a PDF). I took the photos all in Raw format. Aperture, or my computer, is not powerful enough to process all of these photos onto contact sheets from the Print Images menu item; it takes several hours. I suspect I need to convert the files to a low-quality JPEG and print the contact sheets from those, which should be fine because the thumbnails are so small.
Here's the question: I know that I can create JPEGs from these raw files by exporting as JPEG and then reimporting them into Aperture, but this seems overly complicated. Is there a way I can select a number of photos within Aperture, and then select to convert them to JPEG of a particular quality, without leaving the application? Or are the multiple steps - exporting and importing - necessary?
Next time I'm shooting Raw+JPEG to avoid this, by the way...So my workaround actually worked. I exported the photos as low-quality JPEGs, reimported them into a new project, and processed a Contact Sheet off of those. To process a Contact Sheet with the raw files would have taken Aperture about 12 hours or so. To process a Contact Sheet using the low-quality JPEGs took about 10 minutes. I'm glad this worked, though I wish there were a way in Aperture to create JPEGs from the raw files without leaving the application.
-
Exporting and Importing Virtual servers with Windows 2012 R2 Hyper V
Hi
We are looking for various options / best practice in exporting and importing VSs between Windows 2012 R2 servers. Live migration we tested between servers in same VLAN and it's fine, but some servers are in different VLAN and hardware firewall is there
in between. So we exported the VS and while importing it, there is no option to export each Virtual disk to separate partitions / LUNs. Is it fine to create a new VS in the new server and just copy the VDs from the other HV host server, or exporting and importing
is the only proper method?
Thanks in advance
LMSHi Laljeev,
Please allow me to state my understanding of the two methods :
1.when you want to copy vhd you may need to shutdown the VM , further more if there is some snapshots I think it will be a trouble .
2. "export" you still need to shutdown VM but it doesn't have the trouble with snapshots .
The other way I will use is , "move" all of the VM's data to external disk then import it into destination hyper-v server (it can decrease the off-line time of VMs).
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.
Elton, in Windows Server 2012 R2, we do not need to show down the VM to export it via the Hyper-V Manager GUI or Powershell...
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx
Maybe you are looking for
-
Ever since I installed Windows 7 months ago on my T400, I've noticed (when docked, with external speakers) it makes a speaker hiss that is correlated to mouse movement (external wireless mouse), and particularly, scrolling with the mouse wheel. I've
-
i downloaded firefox update, had nothing but troubles since, computer crashing when i try to open, or cursor lag for a long time ie. i try to move to do something it has to think about for 30 seconds to having to pushing reset to get anthing hapening
-
Where is 1.9 bios for KT4V ?
Should be available whats up ? ?(
-
How to update values in the table control at Cat2 transaction,
Hi, i am working on cat2 transaction, here i am using the exit_saplcats_006 and updating values at catsdb table, but i want to display this values at the table control in the cat2 transaction. can any one provide me solution for this same. Regards
-
Open old library in aperture 3.5 fails
I upgraded to 3.5 on my mac mini, but now I can't open my existing libraries (from 3.2) : it says the lib has to be converted, that I have to reload aperture for that to happen, that it will reload and convert my lib... but then I just reloads my cur