Howto find firmware for WLC 4402

We just bought out first piece of Cisco equipment, an AIR-WLC4402-25-K9 (a WLAN controller). Now I?m looking to find if I have the latest firmware (or whatever it?s called on Cisco) on it.
I have registered for an account on cisco.com (as you see) and when I go in to techsupport and check the download section for software for WLC 4402 I can?t find anything. Is this because there is nothing to download or is it because I need to register my products serial number on my account some where ?

Hello Daniel
What is the software u have running now.. I can see the latest software for WLC 4400 as 4.0.206.0 on the download page...
With a normal cisco.com account, u will not have access to download softwares/TAC etc.. you need to have special permissions for that.. to download IOS, u can either contact your cisco partner, who supplied you the box or ask them to make a PICA ID for you.. PICA is a special partner Initiated access ID, which can enable features like IOS downloads for specific product which u have procured. You can talk to your Integrator to get this acccess..
Hope this helps.. all the best.. rate replies if found useful..
Raj

Similar Messages

WLAN override option not available for WLC 4402 - 6.0.196.

Hi All,
Its kind of weird BUT it seems that the option for WLAN override is missing.u.
I could find it on the lower version BUT not on the 6.0.196.
Please help.
Does this mean I could only set it up via the WCS and not the WLC directly.
Thank you.
Warmest Regards,
Azzafir Ariff Patel.

Hi Scott,
Thank you so much for the clarification.
Thanks again.
Quoting fella5 :
azzafir,
>
A new message was posted in the Discussion thread "WLAN override
option not available for WLC 4402 - 6.0.196.":
>
https://supportforums.cisco.com/message/3042635#3042635
>
Author : Scott Fella
Email : [email protected]
Profile : https://supportforums.cisco.com/people/fella5
>
Message:

I can't find firmware for my macbook6,1 2009late!

hey guys, i have some problem here.
when i turn a boot camp assistant it says that i should update my firmware to continue.
so, i went to the apple site to get firmware but i can't find firmware for my macbook!
i tried to update my software latest. what should i do for it?
anybody give me some advice!! plz

While I've found reference to a Firmware update for the MacBook versions immediately
earlier than your model and immediately later than your model (you cite MacBook6.1)
there was no listing where I commonly find that information on yours.
How and where was your MacBook identified as 6.1? In the system profile inside?
Very odd that it would ask for a Firmware update for BootCamp, unless there is an
issue with either BootCamp or the computer.
If you cannot discover what is going on, that would be an item to consult a Genius
at an Apple Store, should there be one within reasonable distance of your location.
At many Apple Stores that have an expert or Genius on staff, you can ask. Several
allow you to set an appointment ahead of a visit so you have scheduled time there.
A visit to see the Genius should be of no charge, and they can diagnose issues
even though your device may not have any AppleCare or warranty plan.
You could contact Support to set reservation:
http://www.apple.com/retail/geniusbar/
•Find an Apple Authorized Service Provider
Sorry that isn't an answer to your question.
Good luck & happy computing!

Can't find firmware for BEFW11S4 v2

I'm having trouble finding a firware update for v2 of my BEFW11S4 router. The support page for this model offers a firmware update for v4 only. My current firmware v. is 1.45, which may be the latest version, but I can't seem to find this out anywhere on the Linksys website.
The reason for the update is that my neew iPod 2G won't connect to the internet and I'm guessing an update might help.
Thanks in advance for any assistance.

You can Download 740 KB firmware for BEFW11S4 V2 and save it on the dekstop
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Help' tab- Then click on the 'Firmware Upgrade' .... Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Can't Find Firmware for WRT54G V5.1

Purchased the WRT54G week ago, looked for latest firmware (just wanted to have the latest one). Looked on linksys, couldn't find the firmware for version 5.1 (i saw the version of the router on the sticker on the bottom underneath the Linksys logo, it says model no: WRT54G V 5.1). Do i have to use another firmware type instead of searching for the 5.1 ?

the version 5 firmware will work with the version 5.1

Problem finding firmware for Creative MuVo2

Yes as the topic has said , im having problems finding the firmware for this mp3 player which i just bought a few months ago overseas. I was wondering if anyone has them can post em here or give me a link to it so i can download. I kinda accidentally delete it while fixing a problem but instead i created a bigger problem. For 2 days straight i've been surfing around the net just to find it but still no site that has the firmware for it Pls anyone out there , really need your help.. thanx.Message Edited by Ryzcvk on 03-3-2005 07:39 AM

How about this?

Where find firmware for WRT160N: v2.0.02_008?

Where can I find revision 8 of the WRT160N version 2 firmware?

That isn't malware but if you want you can PM & I'll email you the same file that I received from LinkSys in January. Ths has been circulated around here for serveral months so its not malware.
WRT160N v2 users --- 1) Get BUILD 08 if you don't have it already 2) A fix IS in the works.
Where can I get this fine firmware?
1) http://audipages.com/router/
2) PM me so I can email you a zip of the firmware if necessary. Be sure to use OpenDNS if reverting to build 8.

Can WLC 4402 support AIR-CAP1602E-S-K9?

Hi
I had 1 end of life WLC 4402 controller. Can it support AIR-CAP1602E-S-K9 access point? If cannot, what is the supported access points for WLC 4402.
Thanks

Hi Steve
Thanks for the reply. Another question if i use the below access point with smartnet and configure as standalone AP. But in future if I want to configure to lightweight AP, can i request the firmware from CISCO TAC to flash the AP and make it lightweight? Thanks
AIR-SAP1602E-S-K9
802.11a/g/n Standalone AP, Ext Ant, S Reg Domain

Firmware for Ipod 20 GB....help please

Where can I find firmware for my Ipod 20GB? When I go on to apple.com all I find is the Ipod Shuffle firmware information. My Ipod is frozen and will not do anything. Please help. Thank!

Yes under singapore downloads page. Firmware version is .00.02 It is kinda of surprising the firmware has not undergo any updates since the version that came bundled with the player in the box. Zen firmware is less buggy than others?
Make me wonder are all firmware of all models written by the same engineer team? If it is not, I guess I know why certain model firmware always have problems and updates whereas some remain unchanged since launch :smileytongue:

Help to find Gingerbread for MT15a not to MT15i

My mt15a phone originally had Gingerbread OS.
I changed it to 4.0.4 ICS 4.1.B.0.431
But it is some what slow as i feel.
I need re-flash to GB.
But i cant find firmware for Gingerbread to MT15a. But MT15i having the OS every where.
Please Help me to find Gingerbread to MT15a not to MT15i.
Thank You...

Thread moved to better sub forum.
- Community Manager Sony Xperia Support Forum
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

How do I find firmware upgrades for a 1.66 Mac mini, or any mac

We have a Mac Mini 1.66 processor. I have updated all of the software, but notice that there are no firmware updates. How do you find applicable firmware updates? I looked at my son's Macbook Pro and see that there is a Mac Mini firmware update listed and when you click on it, it says that it is not applicable to that machine. He used the migration utility to move from the Mac Mini to the Macbook Pro. My guess is that the Mac Mini is marked somewhere as having the firmware upgrade even though we did a complete install from scratch of the OS after he moved to his Macbook Pro. The re-install took the Macbook back to Tiger and then up to Leopard. I would like to get everything up to date before upgrading to Snow Leopard. As an aside, I would assume I can delete the file if it is allowed on the MacBook Pro that references the firmware for the Mac Mini since it says it is not applicable.

If no firmware updates appears via Software Update, then it's probable that there are none applicable to your model of Mac. The most recent firmware update, probably the one your son is seeing, applies only to the 2009 Mac mini. You can, if you wish, look up a list of all updates released for any model of Mac mini here:
http://support.apple.com/downloads/#Mac%20mini
Regards.

Need Information For Connecting Access point to WLC 4402

Hi Friends
I need Some information for Connecting my New Access point ( Cisco AIRLAP 1242AG) with WLC(4402) Controller
In our network set up we have two WLC(4402) we needs to Connect this New Accesspoint To one of our WLC
My Access point is brand New. I need to Know what all i have to do inorder to connect this AP to the controller (from Acesspoint perspective & WLC perspective)
I need to Know what I need to do in AP to connect to the Controller
Do i need to Assign Static IP Address forAP or after connecting to the switch it automatically gets ip from DHCP and regsiter with controller??
Do i Need to Configure my AP with default gateway(the switch to which is connected ?) & DO i need to configure the AP with Controller Ip address ??
Pls Assist
Regards
Safwan

Hi Scot...
We tried Connecting the Access Point yesterday, but it failed....
We are using Cisco 3500 Access point ...
when we connected , first it automatically got an ip address using DHCP but following error occurred
P70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
Not in Bound state.
*Mar 1 00:13:56.539: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 2 combination
*Mar 1 00:13:56.555: %DHCP-6-ADDRESS_ASSIGN: Interface GigabitEthernet0 assigne
d DHCP address 10.50.11.26, mask 255.255.0.0, hostname AP70ca.9bd5.77c6
*Mar 1 00:14:04.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported version 6.0
.182.0 on WLC USSTLController01
*Mar 1 00:14:14.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported version 6.0
.182.0 on WLC USSTLController01
*Mar 1 00:14:24.564: %CAPWAP-3-UNSUPPORTED_WLC_VERSION: Unsupported
version 6.0
.182.0
version 6.0
.182.0
on WLC USSTLController01
version 6.0
.182.0
Then I COnfigured Ap with Static ip address & default gateway & controller Ip but tht too didnt work...
.182.0 on WLC USSTLController01
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
*Mar 1 00:13:40.908: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C
3750X-48P (e05f.b907.9a20)
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>en
Password:
AP70ca.9bd5.77c6#
*Mar 1 00:13:48.033: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
AP70ca.9bd5.77c6#
P70ca.9bd5.77c6>
*Mar 1 00:13:40.908: %CDP_PD-2-POWER_LOW: All radios disabled - NEGOTIATED WS-C
3750X-48P (e05f.b907.9a20)
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>
AP70ca.9bd5.77c6>en
Password:
AP70ca.9bd5.77c6#
*Mar 1 00:13:48.033: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP
. Renewing DHCP IP.
I also Need to Know Cisco Access point 3500 can be associated with WLC 4402 ( version 6.0.182.0) ??
Pls Advice How to proceed further

Cannot find the latest firmware for the Toshiba 40TL838G

Hi,
I'm trying to download the last firmware for the model 40TL838G but I can't find it.
Where can I find it?
Thank you.

Are you sure that TV is connected to internet properly?
How did you connect it? LAN / WLan stick (TOSHIBA Dual Band WLAN-Adapter WLM-20U2)?
In some cases it could be possible that some routers dont pass the firmware update due to locked ports. In such case you should check your router configuration. As additional option you could try to test the TV in connection with another network

Where I can Find any Firmware for MuVo^2 5gb

...subj
I can't Find It anywhere but i need it very much... Thanx
please answer here or write 2 my icq 8729000

I don't see any firmware for the 5Gb there, unless I'm mistaken. It also doesn't seem to be at Nomadworld.com downloads. I think in the past it was said to contact Creative Support direct.

WLC 4402 & 1131AG - "grouping" ap's for different radio standards?

Hi!
I've just bought a WLC 4402 Wireless controller and 20 APs running WLAPP.
I'm not sure how to define my question, so I'm serving you the whole story.
I work as an IT-apprentice on a school, and this school is located more or less nearby other institutions and private buildings, all running their private WLANs.
My plan is to deploy 1131AG ap's over a larger area. In some places, it's allready crowded with private ap's running on 802.11b/g. In those areas, my plan is to use only 802.11a for my ap's.
But some places, it would also be usefull having both, or only 802.11g (and maybe 802.11b).
I've just used the 4402 and ap's for about a week, so I'm no expert yet.
I can create different WLANS, and limit those wlans to different radio standards, but then I'll have to use different SSID's.
Now, i'm running two Wlans, sending out each their Vlan over two different SSID's. This works perfectly.
So my problem now is: how to make for instance a separate group of AP's (i.e. in a specific building) to run only on 802.11a without having to use a third SSID.
Is this possible, and if so, how?
Please awnser quickly, because I need this to work within monday :P
(I'm sorry for my bad english).
-John-

Hi John,
For the specified AP's why don't you set only the appropriate Data rates for the A Radio to enabled, and disabled for all the b/g Data rates?
Have a look;
Configuring Radio Data Rates
You use the data rate settings to choose the data rates the wireless device uses for data transmission. The rates are expressed in megabits per second. The wireless device always attempts to transmit at the highest data rate set to Basic, also called Require on the browser-based interface. If there are obstacles or interference, the wireless device steps down to the highest rate that allows data transmission. You can set each data rate to one of three states:
Basic Allows transmission at this rate for all packets, both unicast and multicast. At least one of the wireless device's data rates must be set to Basic.
Enabled The wireless device transmits only unicast packets at this rate; multicast packets are sent at one of the data rates set to Basic.
Disabled The wireless device does not transmit data at this rate.
Note At least one data rate must be set to basic.
You can use the Data Rate settings to set an access point to serve client devices operating at specific data rates. For example, to set the 2.4-GHz radio for 11 megabits per second (Mbps) service only, set the 11-Mbps rate to Basic and set the other data rates to Disabled. To set the wireless device to serve only client devices operating at 1 and 2 Mbps, set 1 and 2 to Basic and set the rest of the data rates to Disabled. To set the 2.4-GHz, 802.11g radio to serve only 802.11g client devices, set any Orthogonal Frequency Division Multiplexing (OFDM) data rate (6, 9, 12, 18, 24, 36, 48, 54) to Basic. To set the 5-GHz radio for 54 Mbps service only, set the 54-Mbps rate to Basic and set the other data rates to Disabled.
Hope this helps!
Rob
Please remember to rate helpful posts.......

Howto find firmware for WLC 4402

Similar Messages

Maybe you are looking for