Howto install SAP NW Windows Server with Linux Oracle 11g?
Hi !!!
In this moment i want to install a SAP Netweaver PI, but the client already has a linux database server with oracle.
I read the MasterGuide but i cannot find the section or similar situation.
Scenario
WK8-PI
192.168.1.100
Admin y passwd
Linux-Oracle
192.168.1.77
port: 3355
user y passwd
how to install SAP NW?
Levy
Hi!!!
i read the instruction with Distribution System, and continue the steps, but the time to choose SAP System Database i cannot write the linux server always show me the Windows Server, and i can write the unique field is the instance. After push the next button and send me error, not install oracle database.
thanks
Levy Gonzalez
Similar Messages
-
Install SAP ERP 6.0 with Linux and Oracle RAC
Hi Guru,
I want to install SAP ERP 6.0 with Linux and Oracle RAC. Is this possible?
Where do I find information?
Thanks,
Hugo.Hello Hugo,
You can use either RAC or dataguard. On note [105047|http://service.sap.com/sap/support/notes/105047]:
14. Data Guard
o You can use "Physical Standby".
o You cannot use "Logical Standby".
o You can use Data Guard Broker.
o You can use Maximum Performance Mode, Maximum Availability Mode and Maximum Protection Mode.
o In the case of Maximum Availability and Maximum Protection, you must pay particular attention to a fast network connection in order to avoid performance problems.
o Maximum Protection causes the primary database to terminate if problems occur in the standby database.
60. Real Application Cluster (RAC)
o You can use this feature in accordance with Note 527843.
Regards,
Eduardo Rezende -
How to install sap business one server in Linux OS
Dear all,
Please give solution for this question.....Hi,
SAP B1 will not support linux OS. Please check below guide:
http://rels.co.il/wp-content/uploads/2013/02/System-and-Hardware-Requirements-Guide-for-SAP-Business-One-8-8-and-higher.…
Thanks & Regards,
Nagarajan -
Tns time out windows client , server on linux oracle 11g R1
I have Windows 7 as the host machine and Oracle 11g R1 client installed on it.
I installed VMWare V5.5 (downloaded from oracle site) and then installed Linux on it as guest OS. I have Oracle database 11g R1 intalled on Linux.
I can ping the Linux server from Windows.
I can also ftp to the Linux server from windows and get the files locally on Windows OS.
The listener and tns files are configured correctly (i assume) on both Linux and Windows.
Listener.ora on Linux
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME =CLRExtProc)
(ORACLE_HOME = /u01/app/oracle/product/11.1.0/db_2)
(PROGRAM = extproc)
(SID_DESC=
(GLOBAL_DBNAME=orcl)
(ORACLE_HOME=/u01/app/oracle/product/11.1.0/db_2)
(SID_NAME=orcl)
SUBSCRIBE_FOR_NODE_DOWN_EVENT_LISTENER=OFF
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
(ADDRESS = (PROTOCOL = TCP)(HOST =192.168.159.132)(PORT = 1521)) ) )
Tnsnames.ora on linux
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.159.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
Sqlnet.ora on Linux
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
SQLNET.INBOUND_CONNECT_TIMEOUT = 300
SQLNET.SEND_TIMEOUT = 300
SQLNET.RECV_TIMEOUT = 300
Windows files
Tnsnames.ora on Windows
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST =192.168.159.132 )(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl) )
Sqlnet.ora on Windows
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
SQLNET.INBOUND_CONNECT_TIMEOUT = 300
SQLNET.SEND_TIMEOUT = 300
SQLNET.RECV_TIMEOUT = 300
The error on windows
ping results on windows
C:\Users\sri>ping 192.168.159.132
Pinging 192.168.159.132 with 32 bytes of data:
Reply from 192.168.159.132: bytes=32 time<1ms TTL=64
Reply from 192.168.159.132: bytes=32 time<1ms TTL=64
Reply from 192.168.159.132: bytes=32 time<1ms TTL=64
Reply from 192.168.159.132: bytes=32 time<1ms TTL=64
Ping statistics for 192.168.159.132:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 0ms, Average = 0ms
C:\Users\sri>tnsping orcl
TNS Ping Utility for 64-bit Windows: Version 11.2.0.1.0 - Production on 23-JUL-2010 19:55:56
Copyright (c) 1997, 2010, Oracle. All rights reserved.
Used parameter files:
C:\or11g\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
**Used TNSNAMES adapter to resolve the alias**
**Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST =192.168.159.132)(PORT = 1**
**521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = orcl)))**
**TNS-12535: TNS:operation timed out**# sqlnet.ora Network Configuration File: C:\or11g\product\11.2.0\dbhome_1\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
# This file is actually generated by netca. But if customers choose to
# install "Software Only", this file wont exist and without the native
# authentication, they will not be able to connect to the database on NT.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (TNSNAMES, EZCONNECT)
SQLNET.INBOUND_CONNECT_TIMEOUT = 300
SQLNET.SEND_TIMEOUT = 300
SQLNET.RECV_TIMEOUT = 300 -
Hi Oracle Gurus!
Currently, I am designing an ETL solution that transforms and loads a lot of data from flat files and sends it to an SQL Server 2008 R2 database for storage. However, at a future point of time, it may be decided to add or even replace SQL Server with an Oracle 11g database.
Currently, I am writing script transforms in C# to dynamically generate SSIS packages to tansform and load the data into SQL Server. But considering that in future, an Oracle 11g or 12c database might be added to, or replace the SQL Server database, how do I make my script transforms (or whatever else I am developing currently for SQL Server) reusable to the extent possible?
Or more precisely, what steps do I take, from an Oracle point of view, to ensure that any future migration of data to an Oracle database would be smooth to the extent possible?
Looking up to my Oracle Gurus for enlightenment in this matter!
Novice KidWhen you're writing your on C# code to load data into the SQL Server you have to modify the routines so that they will work with Oracle.
One approach is to use the extproc agent which would allow you to directly call external programs with all the logic in it to perform the load of your files and to put the data into the Oracle database. Another option would be to use utl_file package (or equivalents) which will allow you to open external files from your Oracle database and to directly read its content and then to pass it to the related tables. -
I've installed SAP in my PC with windows 2000 server family....... .......
I've installed SAP in my PC with windows 2000 server family... I want to upgrade my OS to XP. Can it be possible without unmounting SAP??? Please help me.
Hi Pratap,
SAP doesn't work with XP, it works only server Operating System.
But u can instal XP in the system without currupting the SAP.
Make sure that your HDD having atleast 3 partitions.
The first two partintions (Ex.C:/& D:/) may have 2000 Server and SAP respectively.
In the 3rd Partition (Ex.E:/) u can instal XP. but better to not touch 1st two Partitions
To Instal XP follow these steps.
Insert XP OS CD
Restat the System
follow installation procedure according CD
Finally select E:/ to install XP.
Pls let me know your feedback
Regards
Raveendra -
Install HRCS 9.0 R5 with Linux Issue: upgrade Database HRCS 9.0 from PT8.52 to PT8.53
Folks,
Hello. I have been installing HCM and Campus Solution 9.0 with PeopleTools8.53. Server machine is Oracle Linux 5.10 and client machine is Windows XP. My internet architecture is WebLogic11g/Tuxedo11g/OracleDatabase 11gR1. Peopletools 8.53 runs correctly in browser.
In Oracle Linux 5.10 Database Server machine, I run the scripts "createdb10.sql, utlspace.sql, hrcddl.sql, dbowner.sql, psroles.sql, psadmin.sql and connect.sql" one by one. Then I use Data Mover to load data from Windows XP into Oracle Linux 5.10 DB instance HRCS90. The Data Mover script hrcs90ora.dms completes successfully in Windows XP. Configuration Manager is set up correctly. But when I login into Application Designer, I cannot login and get the message as below:
"Security Table Manager (Get): The database is at release 8.52. The PeopleTools being run require databases at release 8.53."
I have been following the document http://docs.oracle.com/cd/E37306_02/psft/acrobat/PeopleTools-8.53-Upgrade_02-2013.pdf to upgrade HCM and Human Resources 9.0 Revision 5 Database Instance HRCS90 in Oracle Database Server with Linux. I have been following chapter 4 task by task to do. Actually, I have run 4 scripts into HRCS90 as below:
Task 4-3-5: run rel853.sql at SQL> in Linux.
Task 4-3-6: run grant.sql at SQL> in Linux.
Task 4-5-3: run ddlora.dms in Windows XP Data Mover into HRCS90.
Task 4-6: run msgtlsupg.dms in Windows XP Data Mover into HRCS90.
Then need to run Task 4-7 to copy project ppltls84cur Project in Application Designer. When login into Application Designer with Database HRCS90 and UserID and pwd PS, I get the same error message as below:
"The database is at release 8.52. The PeopleTools being run require Database at release 8.53."
Application Designer is supposed to login by Task 4-7 to copy projects but it cannot. I have tried to fing out what's wrong as below:
In task 4-1-3: I cannot run script dbtsfix.sqr in Linux and Windows XP.
In task 4-1-9: script ptupgibdel.sql does not have the string "End of PT8.53". There is no script ptupgibdel853.sql to run.
In task 4-3-6: when run script grant.sql, table PSSTATUS and PSACCESSPRFL don't exist. There is only PSOPRDEFN table.
I continue to do task by task in chapter 4 until task 4-27 that's the end, but Application Designer still cannot login. All of Application Engine Programs and SQR Programs cannot run.
My questions are:
First, does Oracle Database HRCS90 has table PSOPRDEFN only without table PSSTATUS and PSACCESSPRFL ?
Second, what's the error by task 4-7 when Application Designer still cannot login ?
Third, why Application Designer still cannot login a the end of doing chapter 4 task 4-27 ? How to solve the issue ?
Thanks.
Thanks.I'm not quite sure what you are missing, but it looks like you missed a script which could cause problems. You need to look through your logs for errors. Are you running rel853 as the AccessID user? I don't know how you would trash PSSTATUS in this process.
You don't mention running this.
Task 4-3-2: Creating Tablespaces
This step runs the PTDDLUPG script, which builds new tablespaces as part of the upgrade to the new PeopleSoft release.
It creates tablespace PSIMAGE2, which doesn't exist in the datamover load you did. Oracle moves and puts around 208 tables here when you run rel853 from what I see.
The first line of rel853 is
UPDATE PSSTATUS SET TOOLSREL='8.53',
LASTREFRESHDTTM = SYSDATE
This is what changes the tools release, sometimes people just run this one update to gain quick and dirty access to a different version.
I pulled this download and ran through it myself without incident doing all the steps you say, adding in 4-3-2 which you seemed to have skipped. I built a system database.
My hcengs.log shows
Importing PSSTATUS
Creating Table PSSTATUS
Import PSSTATUS 1
Building required indexes for PSSTATUS
Updating statistics for PSSTATUS
Records remaining: 7686
After import, PSSTATUS is
SQL> select toolsrel from sysadm.psstatus;
TOOLSREL
8.52
After running rel853n it's now
SQL> COMMIT
2 ;
Commit complete.
SQL> SPOOL OFF
SQL> select toolsrel from sysadm.psstatus;
TOOLSREL
8.53
I ran the other 3 quick scripts. Not sure if it was necessary, but I reset the passwords and re-encrypted them with the new 8.53 datamover for the new salted encryption and fired up app designer. It works. By the way, you should probably run rel853n, it utilizes "newer" (for PeopleSoft that is) data-types than just rel853.sql that were delivered with the 9.0 application line. Since this is a new 9.0 based app build it should be used. -
Install HRCS 9.0 R5 with Linux Issue: upgrade HRCS 9.0 from PT8.52 to PT8.53
Folks,
Hello. I have been installing HCM and Campus Solution 9.0 with PeopleTools8.53. Server machine is Oracle Linux 5.10 and client machine is Windows XP. My internet architecture is WebLogic11g/Tuxedo11g/OracleDatabase 11gR1. Peopletools 8.53 runs correctly in browser.
In Oracle Linux 5.10 Database Server machine, I run the scripts "createdb10.sql, utlspace.sql, hrcddl.sql, dbowner.sql, psroles.sql, psadmin.sql and connect.sql" one by one. Then I use Data Mover to load data from Windows XP into Oracle Linux 5.10 DB instance HRCS90. The Data Mover script hrcs90ora.dms completes successfully in Windows XP. Configuration Manager is set up correctly. But when I login into Application Designer, I cannot login and get the message as below:
"Security Table Manager (Get): The database is at release 8.52. The PeopleTools being run require databases at release 8.53."
I have been following the document http://docs.oracle.com/cd/E37306_02/psft/acrobat/PeopleTools-8.53-Upgrade_02-2013.pdf to upgrade HCM and Human Resources 9.0 Revision 5 Database Instance HRCS90 in Oracle Database Server with Linux. I have been following chapter 4 task by task to do. Actually, I have run 4 scripts into HRCS90 as below:
Task 4-3-5: run rel853.sql at SQL> in Linux.
Task 4-3-6: run grant.sql at SQL> in Linux.
Task 4-5-3: run ddlora.dms in Windows XP Data Mover into HRCS90.
Task 4-6: run msgtlsupg.dms in Windows XP Data Mover into HRCS90.
Then need to run Task 4-7 to copy project ppltls84cur Project in Application Designer. When login into Application Designer with Database HRCS90 and Username PSADMIN, I get the same error message as below:
"The database is at release 8.52. The PeopleTools being run require Database at release 8.53."
Application Designer is supposed to login by Task 4-7 to copy projects but it cannot. I have tried to fing out what's wrong as below:
In task 4-1-3: I cannot run script dbtsfix.sqr in Linux and Windows XP.
In task 4-1-9: script ptupgibdel.sql does not have the string "End of PT8.53". There is no script ptupgibdel853.sql to run.
In task 4-3-6: when run script grant.sql, table PSSTATUS and PSACCESSPRFL don't exist. There is only PSOPRDEFN table.
I continue to do task by task in chapter 4 and chapter 5, but Application Designer still cannot login and all of Application Engine Programs cannot run. Windows XP cannot run SQR programs. Tuxedo Application Server cannot boot in Linux. Both Application Designer and Tuxedo Application Server gets the same error message: "The database is at release 8.52. The PeopleTools being run require Database at release 8.53."
My questions are:
First, does Oracle Database HRCS90 has table PSOPRDEFN only without table PSSTATUS and PSACCESSPRFL ?
Second, what's the error by task 4-7 when Application Designer still cannot login ?
Third, why Application Designer still cannot login and get the same error message after finish doing chapter 4 and chapter 5 ? How to solve the issue ?
Thanks.I'm not quite sure what you are missing, but it looks like you missed a script which could cause problems. You need to look through your logs for errors. Are you running rel853 as the AccessID user? I don't know how you would trash PSSTATUS in this process.
You don't mention running this.
Task 4-3-2: Creating Tablespaces
This step runs the PTDDLUPG script, which builds new tablespaces as part of the upgrade to the new PeopleSoft release.
It creates tablespace PSIMAGE2, which doesn't exist in the datamover load you did. Oracle moves and puts around 208 tables here when you run rel853 from what I see.
The first line of rel853 is
UPDATE PSSTATUS SET TOOLSREL='8.53',
LASTREFRESHDTTM = SYSDATE
This is what changes the tools release, sometimes people just run this one update to gain quick and dirty access to a different version.
I pulled this download and ran through it myself without incident doing all the steps you say, adding in 4-3-2 which you seemed to have skipped. I built a system database.
My hcengs.log shows
Importing PSSTATUS
Creating Table PSSTATUS
Import PSSTATUS 1
Building required indexes for PSSTATUS
Updating statistics for PSSTATUS
Records remaining: 7686
After import, PSSTATUS is
SQL> select toolsrel from sysadm.psstatus;
TOOLSREL
8.52
After running rel853n it's now
SQL> COMMIT
2 ;
Commit complete.
SQL> SPOOL OFF
SQL> select toolsrel from sysadm.psstatus;
TOOLSREL
8.53
I ran the other 3 quick scripts. Not sure if it was necessary, but I reset the passwords and re-encrypted them with the new 8.53 datamover for the new salted encryption and fired up app designer. It works. By the way, you should probably run rel853n, it utilizes "newer" (for PeopleSoft that is) data-types than just rel853.sql that were delivered with the 9.0 application line. Since this is a new 9.0 based app build it should be used. -
Install HRCS 9.0 R5 with Linux Issue: Upgrade HRCS 9.0 Database PT8.52 to PT8.53
Folks,
Hello. I have been installing HCM and Campus Solution 9.0 with PeopleTools8.53. Server machine is Oracle Linux 5.10 and client machine is Windows XP. My internet architecture is WebLogic11g/Tuxedo11g/OracleDatabase 11gR1. Peopletools 8.53 runs correctly in browser.
In Oracle Linux 5.10 Database Server machine, I run the scripts "createdb10.sql, utlspace.sql, hrcddl.sql, dbowner.sql, psroles.sql, psadmin.sql and connect.sql" one by one. Then I use Data Mover to load data from Windows XP into Oracle Linux 5.10 DB instance HRCS90. The Data Mover script hrcs90ora.dms completes successfully in Windows XP. Configuration Manager is set up correctly. But when I login into Application Designer, I cannot login and get the message as below:
"Security Table Manager (Get): The database is at release 8.52. The PeopleTools being run require databases at release 8.53."
I have been following the document http://docs.oracle.com/cd/E37306_02/psft/acrobat/PeopleTools-8.53-Upgrade_02-2013.pdf to upgrade HCM and Human Resources 9.0 Revision 5 Database Instance HRCS90 in Oracle Database Server with Linux. I have been following chapter 4 task by task to do. Actually, I have run 4 scripts into HRCS90 as below:
Task 4-3-5: run rel853.sql at SQL> in Linux.
Task 4-3-6: run grant.sql at SQL> in Linux.
Task 4-5-3: run ddlora.dms in Windows XP Data Mover into HRCS90.
Task 4-6: run msgtlsupg.dms in Windows XP Data Mover into HRCS90.
Then need to run Task 4-7 to copy project ppltls84cur Project in Application Designer. When login into Application Designer with Database HRCS90 and UserID and pwd PS, I get the same error message as below:
"The database is at release 8.52. The PeopleTools being run require Database at release 8.53."
Application Designer is supposed to login by Task 4-7 to copy projects but it cannot. I have tried to fing out what's wrong as below:
In task 4-1-3: I cannot run script dbtsfix.sqr in Linux and Windows XP.
In task 4-1-9: script ptupgibdel.sql does not have the string "End of PT8.53". There is no script ptupgibdel853.sql to run.
In task 4-3-6: when run script grant.sql, table PSSTATUS and PSACCESSPRFL don't exist. There is only PSOPRDEFN table.
My questions are:
First, does Oracle Database HRCS90 has table PSOPRDEFN only without table PSSTATUS and PSACCESSPRFL ?
Second, what's the error by task 4-7 when Application Designer still cannot login ?
Thanks.I'm not quite sure what you are missing, but it looks like you missed a script which could cause problems. You need to look through your logs for errors. Are you running rel853 as the AccessID user? I don't know how you would trash PSSTATUS in this process.
You don't mention running this.
Task 4-3-2: Creating Tablespaces
This step runs the PTDDLUPG script, which builds new tablespaces as part of the upgrade to the new PeopleSoft release.
It creates tablespace PSIMAGE2, which doesn't exist in the datamover load you did. Oracle moves and puts around 208 tables here when you run rel853 from what I see.
The first line of rel853 is
UPDATE PSSTATUS SET TOOLSREL='8.53',
LASTREFRESHDTTM = SYSDATE
This is what changes the tools release, sometimes people just run this one update to gain quick and dirty access to a different version.
I pulled this download and ran through it myself without incident doing all the steps you say, adding in 4-3-2 which you seemed to have skipped. I built a system database.
My hcengs.log shows
Importing PSSTATUS
Creating Table PSSTATUS
Import PSSTATUS 1
Building required indexes for PSSTATUS
Updating statistics for PSSTATUS
Records remaining: 7686
After import, PSSTATUS is
SQL> select toolsrel from sysadm.psstatus;
TOOLSREL
8.52
After running rel853n it's now
SQL> COMMIT
2 ;
Commit complete.
SQL> SPOOL OFF
SQL> select toolsrel from sysadm.psstatus;
TOOLSREL
8.53
I ran the other 3 quick scripts. Not sure if it was necessary, but I reset the passwords and re-encrypted them with the new 8.53 datamover for the new salted encryption and fired up app designer. It works. By the way, you should probably run rel853n, it utilizes "newer" (for PeopleSoft that is) data-types than just rel853.sql that were delivered with the 9.0 application line. Since this is a new 9.0 based app build it should be used. -
Install HRCS 9.0 R5 with Linux Issue: upgrade HRCS 9.0 PT8.52 to PT8.53
Folks,
Hello. I have been installing HCM and Campus Solution 9.0 with PeopleTools8.53. Server machine is Oracle Linux 5.10 and client machine is Windows XP. My internet architecture is WebLogic11g/Tuxedo11g/OracleDatabase 11gR1. Peopletools 8.53 runs correctly in browser.
In Oracle Linux 5.10 Database Server machine, I run the scripts "createdb10.sql, utlspace.sql, hrcddl.sql, dbowner.sql, psroles.sql, psadmin.sql and connect.sql" one by one. Then I use Data Mover to load data from Windows XP into Oracle Linux 5.10 DB instance HRCS90. The Data Mover script hrcs90ora.dms completes successfully in Windows XP. Configuration Manager is set up correctly. But when I login into Application Designer, I cannot login and get the message as below:
"Security Table Manager (Get): The database is at release 8.52. The PeopleTools being run require databases at release 8.53."
I have been following the document http://docs.oracle.com/cd/E37306_02/psft/acrobat/PeopleTools-8.53-Upgrade_02-2013.pdf to upgrade HCM and Human Resources 9.0 Revision 5 Database Instance HRCS90 in Oracle Database Server with Linux. I have been following chapter 4 task by task to do. Actually, I have run 4 scripts into HRCS90 as below:
Task 4-3-5: run rel853.sql at SQL> in Linux.
Task 4-3-6: run grant.sql at SQL> in Linux.
Task 4-5-3: run ddlora.dms in Windows XP Data Mover into HRCS90.
Task 4-6: run msgtlsupg.dms in Windows XP Data Mover into HRCS90.
Then need to run Task 4-7 to copy project ppltls84cur Project in Application Designer. When login into Application Designer with Database HRCS90 and UserID and pwd PS, I get the same error message as below:
"The database is at release 8.52. The PeopleTools being run require Database at release 8.53."
Application Designer is supposed to login by Task 4-7 to copy projects but it cannot. I have tried to fing out what's wrong as below:
In task 4-1-3: I cannot run script dbtsfix.sqr in Linux and Windows XP.
In task 4-1-9: script ptupgibdel.sql does not have the string "End of PT8.53". There is no script ptupgibdel853.sql to run.
In task 4-3-6: when run script grant.sql, table PSSTATUS and PSACCESSPRFL don't exist. There is only PSOPRDEFN table.
My questions are:
First, does Oracle Database HRCS90 has table PSOPRDEFN only without table PSSTATUS and PSACCESSPRFL ?
Second, what's the error by task 4-7 when Application Designer still cannot login ?
Thanks.I'm not quite sure what you are missing, but it looks like you missed a script which could cause problems. You need to look through your logs for errors. Are you running rel853 as the AccessID user? I don't know how you would trash PSSTATUS in this process.
You don't mention running this.
Task 4-3-2: Creating Tablespaces
This step runs the PTDDLUPG script, which builds new tablespaces as part of the upgrade to the new PeopleSoft release.
It creates tablespace PSIMAGE2, which doesn't exist in the datamover load you did. Oracle moves and puts around 208 tables here when you run rel853 from what I see.
The first line of rel853 is
UPDATE PSSTATUS SET TOOLSREL='8.53',
LASTREFRESHDTTM = SYSDATE
This is what changes the tools release, sometimes people just run this one update to gain quick and dirty access to a different version.
I pulled this download and ran through it myself without incident doing all the steps you say, adding in 4-3-2 which you seemed to have skipped. I built a system database.
My hcengs.log shows
Importing PSSTATUS
Creating Table PSSTATUS
Import PSSTATUS 1
Building required indexes for PSSTATUS
Updating statistics for PSSTATUS
Records remaining: 7686
After import, PSSTATUS is
SQL> select toolsrel from sysadm.psstatus;
TOOLSREL
8.52
After running rel853n it's now
SQL> COMMIT
2 ;
Commit complete.
SQL> SPOOL OFF
SQL> select toolsrel from sysadm.psstatus;
TOOLSREL
8.53
I ran the other 3 quick scripts. Not sure if it was necessary, but I reset the passwords and re-encrypted them with the new 8.53 datamover for the new salted encryption and fired up app designer. It works. By the way, you should probably run rel853n, it utilizes "newer" (for PeopleSoft that is) data-types than just rel853.sql that were delivered with the 9.0 application line. Since this is a new 9.0 based app build it should be used. -
HP Office Jet Pro 8600 Plus 910 n printer driver does not install on a windows server 2008R2 OS
I recently had a new server installed, a Proliant with a Windows Server 2008R2 operating system. I now just discovered that my All in One Office Jet Pro 8600 Plus A 910 will not install on the Windows Server 2008 R2, ïncompatible operating system. Does anybody have a workaround or solution?
Hello dawnp,
Welcome to the HP Forums.
I see that you are having an issue with installing the printer on to your Windows 7 computer.
I suggest that we start off by running the HP Print and Scan Doctor. If the Doctor fails, please let me know where it failed as well as any error codes you may see.
Write me back when you have time and I will be happy to help.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Is it possible to install Firefox on Windows Server 2008?
I try to install Firefox 3.6 on Windows server 2008 but it says that the file is corrupted.
Is it possible to install Firefox on Windows Server 2008?From the Parallels website:
32-bit Operating Systems
Windows 8 with: Windows 8, 8.1 (when available)
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2008 R2, SP2, SP1, SP0
64-bit Operating Systems
Windows 8
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2012
Windows Server 2008 R2, SP2, SP1, SP0
I do suggest that you upgrade RAM to at least 8gig
if you haven't already.
FWIW, I currently use Win8/64 bit with Parallels on a 2011 Mini Server
using the windows environment for engineering applications and have
had no issues. I am running Mountain Lion but do not have the
Server app installed. -
I am wondering if it is possible to install and run Windows Server 2008 on a Mac Mini Server as a VM as my main application uses Windows VisualBasic and Fox Pro and requires a Static IP to connect to it, My other offices connects to Windows Server via RDP.
Basically I am researching a Server for the same purpose and since Mac Mini and OsX both are robust in nature it can fit the bill if every thing work fine.
ThanksFrom the Parallels website:
32-bit Operating Systems
Windows 8 with: Windows 8, 8.1 (when available)
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2008 R2, SP2, SP1, SP0
64-bit Operating Systems
Windows 8
Windows 7 SP1
Windows Vista SP0, SP1, SP2
Windows Server 2012
Windows Server 2008 R2, SP2, SP1, SP0
I do suggest that you upgrade RAM to at least 8gig
if you haven't already.
FWIW, I currently use Win8/64 bit with Parallels on a 2011 Mini Server
using the windows environment for engineering applications and have
had no issues. I am running Mountain Lion but do not have the
Server app installed. -
As we all know,
the Windows Server Essentials Experience role is available in Windows Server 2012 R2 Standard and Windows Server 2012 R2 Datacenter. We can add the Windows Server
Essentials Experience role in Server Manager or via Windows PowerShell.
In this article, we introduce the steps to install and configure Windows
Server Essentials Experience role on Windows Server 2012 R2 Standard via PowerShell locally and remotely. For better analyze, we divide this article into two parts.
Before installing the Windows Server Essentials Experience Role, please use
Get-WindowsFeature
PowerShell cmdlet to ensure the Windows Server Essentials Experience (ServerEssentialsRole) is available. (Figure 1)
Figure 1.
Part 1: Install Windows Server Essentials Experience role locally
Add Windows Server Essentials Experience role
Run Windows PowerShell as administrator, then type
Add-WindowsFeature ServerEssentialsRole cmdlet to install Windows Server Essentials Experience role. (Figure 2)
Figure 2.
Note: It is necessary to configure Windows Server Essentials Experience (Post-deployment Configuration). Otherwise, you will encounter following issue when opening Dashboard.
(Figure 3)
Figure 3.
2. Configure Windows Server Essentials Experience role
(1) In an existing domain environment
Firstly, please join the Windows Server 2012 R2 Standard computer to the existing domain through the path:
Control Panel\System\Change Settings\”Change…”\Member of. (Figure 4)
Figure 4.
After that, please install Windows Server Essentials Experience role as original description. After installation completed, please use the following command to configure Windows
Server Essentials:
Start-WssConfigurationService –Credential <Your Credential>
Note: The type of
Your Credential should be as: Domain-Name\Domain-User-Account.
You must be a member of the Enterprise Admin group and Domain Admin group in Active Directory when using the command above to configure Windows Server Essentials. (Figure 5)
Figure 5.
Next, you can type the password for the domain account. (Figure 6)
Figure 6.
After setting the credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 7)
Figure 7.
By the way, you can use
Get-WssConfigurationStatus
PowerShell cmdlet to
get the status of the configuration of Windows Server Essentials. Specify the
ShowProgress parameter to view a progress indicator. (Figure 8)
Figure 8.
(2) In a non-domain environment
Open PowerShell (Run as Administrator) on the Windows Server 2012 R2 Standard and type following PowerShell cmdlets: (Figure 9)
Start-WssConfigurationService -CompanyName "xxx" -DNSName "xxx" -NetBiosName "xxx" -ComputerName "xxx” –NewAdminCredential $cred
Figure 9.
After you type the commands above and click Enter, you can create a new administrator credential. (Figure 10)
After creating the new administrator credential, please type “Y” to continue to configure Windows Server Essentials. (Figure 11)
After a reboot, all the configurations will be completed and you can open the Windows Server Essentials Dashboard without any errors. (Figure 12)
Figure 12.
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.Part 2: Install and configure Windows Server Essentials Experience role remotely
In an existing domain environment
In an existing domain environment, please use following command to provide credential and then add Server Essentials Role: (Figure 13)
Add-WindowsFeature -Name ServerEssentialsRole
-ComputerName xxx -Credential DomainName\DomainAccount
Figure 13.
After you enter the credential, it will start install Windows Server Essentials role on your computer. (Figure 14)
Figure 14.
After the installation completes, it will return the result as below:
Figure 15.
Next, please use the
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with a remote computer. You can use the commands below:
Enter-PSSession –ComputerName
xxx –Credential DomainName\DomainAccount (Figure 16)
Figure 16.
Then, please configure Server Essentials Role via
Add-WssConfigurationService cmdlet and it also needs to provide correct credential. (Figure 17)
Figure 17.
After your credential is accepted, it will update and prepare your server. (Figure 18)
Figure 18.
After that, please type “Y” to continue to configure Windows Server Essentials. (Figure 19)
Figure 19.
2. In a non-domain environment
In my test environment, I set up two computers running Windows Server 2012 R2 Standard and use Server1 as a target computer. The IP addresses for the two computers are as
below:
Sevrer1: 192.168.1.54
Server2: 192.168.1.53
Run
Enable-PSRemoting –Force on Server1. (Figure 20)
Figure 20.
Since there is no existing domain, it is necessary to add the target computer (Server1) to a TrustedHosts list (maintained by WinRM) on Server 2. We can use following command
to
add the TrustedHosts entry:
Set-Item WSMan:\localhost\Client\TrustedHosts IP-Address
(Figure 21)
Figure 21.
Next, we can use
Enter-PSSession
cmdlet and provide the correct credential to start an interactive session with the remote computer. (Figure 22)
Figure 22.
After that, you can install Windows Server Essentials Experience Role remotely via Add-WindowsFeature ServerEssentialsRole cmdlet. (Figure 23)
Figure 23.
From figure 24, we can see that the installation is completed.
Figure 24.
Then you can use
Start-WssConfigurationService cmdlet to configure Essentials Role and follow the steps in the first part (configure Windows Server Essentials Experience in a non-domain environment) as the steps would be the same.
The figure below shows the status of Windows Server Essentials.
Figure
25.
Finally, we have successfully configured Windows Server Essentials on Server1. (Figure 26)
Figure 26.
More information:
[Forum
FAQ] Introduce Windows Powershell Remoting
Windows Server Essentials Setup Cmdlets
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread. -
Steps to install SAP 4.7 EE with MS SQL 2000: URGENT
Hi all Basis Guru's
We are planning to install SAP 4.7 EE with DB: MS SQL 2000 on our new IBM server, we are already running a SAP server on our OLD SERVER and we just want to install the same in the NEW IBM SERVER for which i am seeking some expert help.
I wanted a document which can show me the steps to install SAP 4.7 and also MS SQL 2000,
I have pdfs released by SAP which i got from service market place under instguides section, but they are not soo helpful as i am a jr consultant the termninology used by them is not in my understanding..
So i request all, to send in a document which can easily assist me in installing SAP 4.7 and Ms SQL 2000 in step by step process
Also is it neessary for me to install the SP3 for Ms SQL 2000.
Reward points for sure...
Plz do help me in this as, this task has to be completed by 03-08-07 EOD.
Million Thanks in Advance
Regards
Hari Haran.VHi Juan,
I have done all the pre-installation steps accoring to the SAP released doc from the service market place...
but i get an error during the installation of the CI...(this is happening at the time of <i><b>EXTRA SAP SYSTEM KERNAL ARCHIVES</b></i>)
Here is the detailed LOG of the error.....
INFO 2007-08-02 18:50:39
Processing of host operation t_HostInfo_SHARED succeeded.
INFO 2007-08-02 18:50:47
The 'saploc' share exists at directory 'C:\usr\sap'. Choosing drive C: as SAP System drive.
INFO 2007-08-02 18:51:13
Successfully connected to PDPLMAIN\PDPLMAIN
INFO 2007-08-02 18:51:13
Executing check Product Version ...
INFO 2007-08-02 18:51:13
Script "Product Version" successfully executed
INFO 2007-08-02 18:51:13
Executing check Product Patch ...
INFO 2007-08-02 18:51:13
Script "Product Patch" successfully executed
INFO 2007-08-02 18:51:13
Executing check Product Edition ...
INFO 2007-08-02 18:51:13
Script "Product Edition" successfully executed
INFO 2007-08-02 18:51:13
Executing check Collation ...
INFO 2007-08-02 18:51:13
Script "Collation" successfully executed
INFO 2007-08-02 18:51:13
Executing check SysAdmin Rights ...
INFO 2007-08-02 18:51:13
Script "SysAdmin Rights" successfully executed
INFO 2007-08-02 18:51:13
Successfully connected to PDPLMAIN\PDPLMAIN
INFO 2007-08-02 18:51:13
Executing check Database existance ...
INFO 2007-08-02 18:51:13
Script "Database existance" successfully executed
INFO[E] 2007-08-02 18:51:36
Account group="pdplmain\SAP_LDAP" does not exist. <#1>
INFO[E] 2007-08-02 18:51:37
Account group="ORA_PD0_DBA" does not exist. <#1>
INFO[E] 2007-08-02 18:51:37
Account group="ORA_PD0_OPER" does not exist. <#1>
INFO[E] 2007-08-02 18:51:49
Account group="pdplmain\dbpd0ctl" does not exist. <#1>
PHASE 2007-08-02 18:57:16
SAP Web Application Server
PHASE 2007-08-02 18:57:16
Request common parameters of SAP System
PHASE 2007-08-02 18:57:17
Collecting information on database configuration
PHASE 2007-08-02 18:57:17
Create operating system accounts
INFO 2007-08-02 18:57:17
Copying file C:/SAPinst MSSQL SAPINST/keydb.xml to: C:/SAPinst MSSQL SAPINST/keydb.1.xml.
INFO 2007-08-02 18:57:17
Creating file C:\SAPinst MSSQL SAPINST\keydb.1.xml.
INFO 2007-08-02 18:57:18
Copying file C:/SAPinst MSSQL SAPINST/product.xml to: C:/SAPinst MSSQL SAPINST/product.1.xml.
INFO 2007-08-02 18:57:18
Creating file C:\SAPinst MSSQL SAPINST\product.1.xml.
PHASE 2007-08-02 18:57:33
Preparing OS account for MCOD installation
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:33
Request operating system user information
PHASE 2007-08-02 18:57:34
Request operating system user information
PHASE 2007-08-02 18:57:34
Request operating system user information
PHASE 2007-08-02 18:57:34
Request operating system user information
PHASE 2007-08-02 18:57:34
Request operating system user information
INFO 2007-08-02 18:57:35
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
INFO 2007-08-02 18:57:35
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
INFO 2007-08-02 18:57:35
Successfully added privileges 'SeTcbPrivilege SeAssignPrimaryTokenPrivilege SeIncreaseQuotaPrivilege' to account 'S-1-5-21-1801674531-606747145-839522115-500' on host 'pdplmain'!
INFO 2007-08-02 18:57:36
Evaluating all 'tNT_RegistryEntries' table rows succeeded.
PHASE 2007-08-02 18:57:38
Preparing DBMS-specific environment variables
WARNING 2007-08-02 18:57:38
Error 1332 (No mapping between account names and security IDs was done.
) in execution of a 'SetEntriesInAcl' function, line (661), with parameter ().
INFO 2007-08-02 18:57:38
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:39
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:41
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:42
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:44
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:45
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:46
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:47
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:48
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:49
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:50
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:51
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:51
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:52
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:53
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:53
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:54
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
INFO 2007-08-02 18:57:55
Creating or updating all NT registry entries from the tNT_RegistryEntries table succeeded.
PHASE 2007-08-02 18:57:55
Adapt filesystem
PHASE 2007-08-02 18:57:55
Prepare check/adapt SAP instance filesystem
INFO 2007-08-02 18:57:55
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/prfclog exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0 exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00 exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/data exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/data/cache exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/exe exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/log exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/sec exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/DVEBMGS00/work exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/exe exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/exe/opt exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/exe/dbg exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/exe/run exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/gen exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/gen/dbg exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/gen/opt exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/global exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/profile exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/PD0/SYS/src exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap/tmp exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/tmp exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/EPS exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/EPS/in exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/EPS/out exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/EPS/log exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/bin exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/buffer exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/cofiles exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/data exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/etc exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/log exists already. Nothing to do.
INFO 2007-08-02 18:57:56
File system node C:\usr\sap\trans/sapnames exists already. Nothing to do.
INFO 2007-08-02 18:57:56
Copying file H:/sapinst_mssql/NT/I386/UNINSAP.EXE to: C:\usr\sap\PD0\SYS\exe\run\..\UNINSTSAP.EXE.
INFO 2007-08-02 18:57:56
Copying file system node H:/sapinst_mssql\NT\I386\UNINSAP.EXE with type NODE to C:\usr\sap\PD0\SYS\exe\run\..\UNINSTSAP.EXE succeeded.
INFO 2007-08-02 18:57:56
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2007-08-02 18:57:57
Processing of all file system node operations of table t_SAPComponent_Filesystem_Action_SHARED succeeded.
INFO 2007-08-02 18:57:58
Creating of all NT shares while processing the table 'tNT_SHARE' succeeded.
INFO 2007-08-02 18:57:58
Creating of all NT shares while processing the table 'tNT_SHARE' succeeded.
WARNING 2007-08-02 18:57:59
The specified service does not exist as an installed service.
! Error in execution of a 'OpenService' function, line (286), with parameter(s) (SAPPD0_00).
WARNING 2007-08-02 18:57:59
The specified service does not exist as an installed service.
! Error in execution of a 'OpenService' function, line (286), with parameter(s) (SAPOsCol).
PHASE 2007-08-02 18:57:59
Extract archives
INFO 2007-08-02 18:58:00
Processing of all file system node operations of table t_SAPComponent_Archives_FORMS_SHARED succeeded.
PHASE 2007-08-02 18:58:01
Extract SAP System kernel archives
INFO 2007-08-02 18:58:01
Creating file C:\SAPinst MSSQL SAPINST\SAPEXE.SAR.log.
ERROR 2007-08-02 18:58:01
MOS-01021 PROBLEM: .\sapcar.exe -xvgf H:\SAP_KERNEL_MSSQL_IA64/NT/I386/SAPEXE.SAR, -R C:\usr\sap\PD0\SYS\exe\run returned with '29'. CAUSE: See output './SAPEXE.SAR.log'. SOLUTION: Solve the CAUSE and retry.
ERROR 2007-08-02 18:58:01
FJS-00012 Error when executing script.
Waiting to hear from at the earliest
Regards
Hari haran.v
Maybe you are looking for
-
Return to Vendor with Shipping - Help with the credit memo
Hey guys, I've configured return deliveries to vendors, using a return PO with shipping, then creating an RL delivery type > transfer order> post goods issue. All that works fine. My trouble is trying to set up the credit memo. I'm not an SD consulta
-
My photo album is not in order by date taken
my photo album is not in order by date taken, how do I get it in order?
-
Solution Manager_document URL link
Dear friends, I have uploaded project documents in SOLAR01. If i get into document attributes, i am finding option "generate". If i click on that, message has shown as "URL buffered". But i could not find the URL link for my document. How to get a
-
After update of Nightly to ver 36. appears problem with flash animation/games Downloaded (from adobe.com) and installed adobe flash player ver.15.0.0.189 appears in list of plug-ins as "Shockwave player 15.0.0.189" - and non flash animation(games) wo
-
I recently bought a 2011 Macbook pro, and here are the specs. 2.3 Ghz i7 quad core 8gb ram and 500 gb HDD (7200) I had restored the laptop and formatted the HDD, and then installed Maverick on it. The bootup time is about 2-3 minutes before I get to