Howto migrate from corrupt 10.4 server to fresh 10.4 server

Ok, I'm screwed, and I really appreciate the help in advance.
I'm not sure what happened, but my 10.4.11 server will not boot into the login screen (or beyond). I have booted from the Install DVD and backed up the HD to an external HD. Then I ran Disk Utility and repaired the disk (which needed the repair), and then repaired permissions.
But the machine still wouldn't boot into the login screen (or beyond). It just gets stuck on a blue screen with a (startup style) pinwheel. I do not have any haxies installed on this machine - its a straight-up headless server.
I can boot into single user mode, and I've tried deleting all of the caches and running the periodic tasks, and everything I can think of.
I've tried zapping the PRAM.
The machine still won't boot into the login screen (or beyond). I've resigned myself to formatting and reinstalling.
The services that I use are web and email... and I have over 100 email users. How do I migrate my users and their emails and the server settings from the backup to the freshly installed server?
Thank you in advance for your help.

Thanks for the reply. Unfortunately, that resource assumes that I'm migrating from a prior version to 10.4 (I'm migrating from a borked 10.4), and it assumes that I can export settings from a working server (again, my setup is borked, unfortunately).
I know Apple makes good stuff, but I'm surprised that this hasn't happened to anyone else.

Similar Messages

Migration from ATG Dynamo 5.1 to Weblogic 10.3 Server

Hi,
We are currently involved in a project in which the application has be
migrated from the ATG Dynamo Server 5.1 to Weblogic 10.3 application
server.
While doing this we are facing some problems related to
DynamoHttpServletRequest.
Previosly the code was written as below:
DynamoHttpServletRequest atgRequest = (DynamoHttpServletRequest)
request;
HttpSession atgSession = (HttpSession) atgRequest.resolveName("/" );
Since we are moving to the weblogic server we are planning to remove
the DynamoHttpServletRequest and use the javax HttpServletRequest.
But to do this i am unable to find the functionality that does
resolveName("/" ).
I tried writing the below 2 lines of code inplace of the 2 lines of
code above, but it is not solving the purpose.
HttpServletRequest weblogicRequest = (HttpServletRequest) request;
HttpSession weblogicSession = (HttpSession)
weblogicRequest.getSession();
Can anybody please help me in solving this problem where i can replace
DynamoHttpServletRequest with HttpServletRequest.
Any suggestions are welcome.
Thanks in advance
Shailendra

Hi Ravi,
Thanks for your response.
While migrating we have tried to remove the ATG dependency and we are getting session invalid. We are unable to find a similar method for “resolveName” in HTTPServletRequest. The method “resolveName” of the DynamoHttpServletRequest is being used to retrieve the session object by passing a String parameter (‘/’ or any URL).
Whereas the HTTPServletRequest has only two methods [getSession() or getSession(Boolean)] to retrieve the session object and here we cannot pass any String parameter. Thus we are unable the replicate the existing functionality using the HTTPServletRequest class.
Below are some code examples for your reference.
Sample1:
Below commented code is original one. we tried to as mentined below:
//import atg.servlet.DynamoHttpServletRequest;
/* DynamoHttpServletRequest atgRequest = (DynamoHttpServletRequest) request;
HttpSession atgSession = (HttpSession) atgRequest.resolveName("/" );
String atgsession = "jsessionid=" + atgSession.getId();
HttpServletRequest weblogicRequest = (HttpServletRequest) request;
HttpSession weblogicSession = (HttpSession) weblogicRequest.getSession();
String weblogicsession = "jsessionid=" + weblogicSession.getId();
Sample2:
Below commented code is original one. we tried to as mentined below:
/* ATG Dynamo for Session Last Access Time functionality */
//import atg.servlet.DynamoHttpServletRequest;
/* DynamoHttpServletRequest atgRequest = (DynamoHttpServletRequest) request;
HttpSession session = (HttpSession) atgRequest.resolveName("/atg/dynamo/servlet/sessiontracking/SessionManager/" + sessionID);
HttpServletRequest weblogicRequest = (HttpServletRequest) request;
HttpSession session = (HttpSession) weblogicRequest.getSession();
we would like to know is there any smilar functionality or methods available so we can use in HttpServletRequest or servlets.
Thanks,
Nagesh

Migrating from Crystal Enterprise 10 to Business Objects XI / Crystal Server XI

Post Author: Karthik003
CA Forum: Deployment
Hi,
Anyone please explain me which one is right,
At present we are running on Crystal Enterprise10,which is advantages
Migrating from Crystal Enterprise 10 to Business Objects XI
or
Migrating from Crystal Enterprise 10 to Crystal Server XI
Please explain me the things that needs to be had in mind while going for the migration.
Thanks
kartik

Post Author: TAZ
CA Forum: Deployment
CRS is limited to single server installs, it has less functionality such as no auditing. Enterprise can be clustered across many servers, has auditing and webi/deski from E6. So which one is best would depend on the size of your planned implementation and the features that you want.
Regards,
Tim

Howto migrate from ora7.3.4 to 9i

Hi,
We've planned a db migration from an oracle 7.3.4 to a 9i.
All the creation scripts are ready for the 7.3.4, backups as well.
Should I apply those scripts directly and import my backup?
Specific things to change int the mydbinit.ora?
Any help highly appreciated.
Thanks
JMaxime

Suggest you look through the Oracle9i Migration Guide. It is rather complete and works well. Includes the desupport init parameters. The URL is
http://download-east.oracle.com/otndoc/oracle9i/901_doc/server.901/a90191/toc.htm

HowTo migrate from iMac to Macmini

Hi
I just bought a new Mac Mini with 240 SSD + 750 HD storage memory.
I want to use migration assistent to move all data from my old iMac to this Mini Machine.
Of course, to less memory on SSD wich is marked as only choice to migrate data to.
What must I do to migrate all data from iMac to Mac Mini ?
Thanks
Jan

Tom in London wrote:
Then I would use Carbon Copy Cloner to clone the entire HD of the iMac to the HD of the MacMini. While this is happening I would go to lunch.
Job done!
Job not done. Come back and barf your lunch, your machine is hosed.
1: CCC clones the OS X partition, he will wind up with a iMac's Snow (or Leopard) on the Mini with a Lion Recovery Partition.
2: Hardware drivers on the iMac OS X are not on the Mini, the Mini could have video or overheating issues, if it boots at all.
You can't clone any old OS X to different type Mac unless you have all the hardware drivers and Apple has tied those to certain disks, and the firmware won't boot from earlier OS X install disks.
In fact it's possible to get Snow Leopard on the new Mac Mini's but latest reports it runs at a reduced speed.
https://discussions.apple.com/thread/3264421?start=0&tstart=0

Migration of the database from Microsoft SQL 2014 Express to Microsoft SQL 2012 Server

I posted a similar thread yesterday, and I realized that there was a serious typo.
Link: https://social.msdn.microsoft.com/Forums/sqlserver/en-US/b3e201ea-6c7c-43a4-8908-842b714ea451/migration-of-the-database-from-microsoft-sql-2014-express-to-microsoft-sql-2012-server?forum=sqlservermigration
Therefore, I made a decision to post another thread right now.
I am
writing to ask if there are any known issues when migration from MS SQL 2014 Express to MS SQL 2012 Server version. Are there any step-by-step instruction on how I can go about doing this?
Looking forward to your response. Thank you for your time.
Regards,
Jeff Yoo

Hello,
SQL Server 2012 setup program won’t allow you to perform a downgrade from SQL Server 2014 Express Edition. Backup/Restore
and Detach/Attach won’t help you either.
One option you have left is using SQL Server Import/Export Wizard as explained on the following article.
http://www.mytechmantra.com/LearnSQLServer/Downgrade_SQL_Server_Database_P1.html
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Migrating From IMAP to Exchange 2013

Hi
I'm looking to migrate from a hosted imap email provider to racked exchange server 2013
we have about users, but also some of the services we provide generate and send mail
We are looking to just migrate the users for now, but at the risk of sounding stupid, I don't think this is possible due to the domain and the mx records, as in we don't want to change the email address' and we would be able to have both hosted and in house,
using the same domain
Any help and advice is very much appreciated

Do you have access to hosted environment to move the mailboxes?
What is the number of users you are talking about?
To move the mailbox you would require some third party tool.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

How do I set up a proxy server for webmail services to assist in migrating from NMS 4.15p6 on NT to iMS 5.1 on HP-UX.

I want to have minimal if no downtime at all when moving the message store. iPlanet support hinted at an "unsupported" proxy server solution, and would give no further information. I am running the MMP with 5.1 and that supports IMAP and POP migration, but I need support for webmail services as well to complete the migration from NT to UNIX with minimal distruption of thousands of users. I am using the MoveUser utility to move the message store in hopes that will clear up some store corruption we have been seeing.

To get this in a 'supported' fashion you might want to wait until the iMS 5.2 release. iPlanet has said this release would include a webmail proxy/mmp server to do exactly what you desire.
A proxy server would not be a solution to your problem as it would have to have access and knowledge to the users mailhost attribute to determine to which host to route the webmail connection. The webmail proxy/mmp will have this functionality.
You might want to contact your iPlanet rep about this product and maybe you could get a copy of it as part of a beta program. I know iPlanet is always looking for oppourtunities for feedback like this.
-Chris

Advice for migrating from Exchange to OS X Server

I am in the process of migrating away from Microsoft products altogether. The biggest beast of all is going to be Exchange.
I am looking at imapsync as a possible method of migrating user mailboxes. Is there anyone here who has undergone this task? Are there any better solutions out there for migrating the mailboxes over?
Thanks in advance.

slopresto wrote:
Is it really that problematic?
I am supporting (begrudgingly) a number of OS X Mail servers. What Apple has up to now has not been very good. No vacation messaging without rolling your own add-in, weak web mail interface, poor integration with other Apple products (iPhone), randomly corrupted databases for no apparent reason, the inability to maintain read/not read status on reconstruct or migration, poor spam handling, no migration tools. I call it the problem of the week. I got a new one today. Unlike any other problem ever seen so far. And it effects one account only. I will admit that I am just tired of it. Does it work. Mostly. But there are better solutions on the platform than the built in solution. Now, this "may" change when Snow Leopard is released. http://www.appleinsider.com/articles/09/02/13/snowleopard_server_to_ramp_up_scalability_andperformance.html which I can not confirm nor deny.
I have used straight postfix on Linux before with only an occasional problem, but never in a corporate environment.
Sadly, this is postfix on OS X, not postfix on Linux. As sad as this is to say, there is a difference and the difference is not in favor of OS X.
My boss, on the other hand has been a Mac guy for 10+ years and assures me that I will be impressed by the performance gains and lack of issues we will have by switching over from Microsoft products.
You will have gains. You will not be tied to licensing fees. You will not be plagued by the intricacies of an Exchange server and its myriad of updates, patches, tweaks, and adjustments. Heck, you will not have to reboot the machine every week to keep it from crashing. OS X has a lot of advantages over Windows in a server environment. OS X has a lot of really good services that are rock solid (BIND, Apache, racoon, the dev tools, Apple File Services (yes, I said it, it is a really good filing protocol!), Podcast server, wikis, directory services, chat server...) that make the OS X a swiss army knife of sorts. But in my experience, mail has been an afterthought and generally more trouble than it is worth.
As a side note, I should mention that Apple did pull off some real magic with the one checkbox mail cluster. I you have an Xsan and are load balancing your mail servers, the setup is beyond easy. There, I said something nice.
Is there anyone out there who has done this successfully and may perhaps know of an easy method of migrating the mailboxes in. Right now, it is a toss up between imapsync and doing a straight import via Outlook using their pst files from the nightly exmerge.
There are methods of doing the migration. If you decide to import via Outlook, I suggest doing a rule based move. If you do a drag and drop, the IMAP connection will likely drop after a few hundred messages and then you have no idea where it stopped. Create a rule to do the move. It will take longer but the time lost to frustration and manually finding where the copy stopped equals out.
Good luck in your migration. I am sorry if I came down negative. OS X Server is a great product. I just have a lot of criticism about the mail implementation. I will say, I am looking forward to September a bit as my opinion may change.
Message was edited by: Strontium90

Migrating from SBS 2011 to Windows Server 2012R2 Standard with 365

Im looking to move SBS 2011 to Server 2012R2 standard and with a 365 migration as well.
Im thinking
BPA for AD (health check)
Add the Server2012R2 as a DC
Ensure replication
Move DHCP
Change DNS
Now this is where I get lost, now Im lost to use either dirsync or add essentials service, I have gone for standard and 30 cals with the option as I have 28 users and the essentials service would make everything quite nice for remote access and backups
etc.... however I don't know whether to just use dirsync with password replication instead ?
Currently Im aiming towards getting the dc up and running then enabling essentials on the dc but I dont know how it will effect SBS and having essentials on the same network and sync'ing people to the cloud ? So Should I use DirSync on a different server
instead to sync up to azure ?
Finally with 365 I have only ever done a migration involving an export of pst's from an exchange box and then on a new domain with new pc's and reimport the pst's on the user accounts in outlook.
However I have read when migrating to 365 was using exchange 2010 there was a application
to move everything across however you needed an ssl cert iirc ? so I dont know how it works now since the nice new dashboard upgrade (assuming the tool has been updated like dirsync)
along with the above how does AD now know where exahcnge if you use the migration app with an ssl cert and is it a case of still running the 365 config tool to configure each user to look at their mail in the
cloud ? Also is it a good idea to enable essentials from the start of the 2012r2 dc for replication top 365 or to use dirsync ?
then finally when replications is all good start transferring the FSMO roles over to the new DC and demote and remove the SBS server
I have seen (below) but i dont think it covers this scenario and I cant be the only person in this situation =\ ?
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
http://social.technet.microsoft.com/Forums/en-US/f552ef12-07a9-4f7a-bf5e-24500c3e1dc3/migrate-sbs-2011-to-server-2012-standard?forum=smallbusinessserver
http://social.technet.microsoft.com/Forums/en-US/e1d4b09f-8857-4ef6-9a80-6a906e76b688/how-to-migrate-sbs-2011-to-standard-2012-server?forum=smallbusinessserver

Hi,
Would you please let us know current situation of this issue? If any update, please feel free to let us know.
à
Currently Im aiming towards getting the dc up and running then enabling essentials on the dc but I dont know how it will effect SBS and having essentials on the same network
and sync'ing people to the cloud?
I’m a little confused with the description. Did you mean that set up DC (Windows Server 2012 Standard) and
then install the Windows Server Essentials Experience role? If so, when you migrate, please refer to the article:
Migrate from Previous Versions to Windows Server 2012 R2 Essentials or Windows Server Essentials Experience
Regarding to migrate Exchange to Office 365, please refer to following articles.
Migrate
All Mailboxes to the Cloud with a Cutover Exchange Migration
Step-By-Step:
Migrating from Exchange 2007 to Office 365
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
Meanwhile, there is an additional article that you can refer to:
Manage Office 365 in Windows Server Essentials. It may help us to understand Office 365 in Server Essentials clearly.
If anything I misunderstand, please don’t hesitate to let me know.
Hope this helps.
Best regards,
Justin Gu

ADPrep Migration from Windows Server 2003 to 2012 Foundation Server fails with error 0x80004005

Hi all,
Having a problem the forums and Google have been unsuccessful in helping me with. Server is Windows 2003 R2, migrating to Windows Server 2012 foundation. Have tried the AD Migration on the new 2012 Foundation server both as a standalone server
and a domain server member before running the migration. I get the following error:
ADPrep execution failed --> System.ComponentModel.Win32Exception (0x80004005): A device attached to the system is not functioning
I've checked the ADprep logs and have found the following:
[2013/01/22:11:15:01.000]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=abd97102-88dd-4013-a009-0e2c2f967ff6,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[2013/01/22:11:15:01.001]
LDAP API ldap_search_s() finished, return code is 0x0
[2013/01/22:11:15:01.001]
Adprep checked to verify whether operation cn=abd97102-88dd-4013-a009-0e2c2f967ff6,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local has completed.
[Status/Consequence]
The operation GUID already exists so Adprep did not attempt to rerun this operation but is continuing.
[2013/01/22:11:15:01.001]
Adprep was about to call the following LDAP API. ldap_search_s(). The base entry to start the search is cn=134428a8-0043-48a6-bcda-63310d9ec4dd,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[2013/01/22:11:15:01.001]
LDAP API ldap_search_s() finished, return code is 0x20
[2013/01/22:11:15:01.001]
Adprep verified the state of operation cn=134428a8-0043-48a6-bcda-63310d9ec4dd,cn=Operations,cn=ForestUpdates,CN=Configuration,DC=apl,DC=local.
[Status/Consequence]
The operation has not run or is not currently running. It will be run next.
[2013/01/22:11:15:01.021]
Adprep was unable to complete because the call back function failed.
[Status/Consequence]
Error message: Unable to access the computer "SERVER.apl.local". The network path was not found.
(0x80070035).
[User Action]
Check the log file ADPrep.log, in the C:\Windows\debug\adprep\logs\20130122111500 directory for more information.
DSID Info:
DSID: 0x1811132a
winerror = 0x1f
NT BUILD: 9200
NT BUILD: 16384
[2013/01/22:11:15:01.021]
Adprep was unable to update forest information.
[Status/Consequence]
Adprep requires access to existing forest-wide information from the schema master in order to complete this operation.
[User Action]
Check the log file, ADPrep.log, in the C:\Windows\debug\adprep\logs\20130122111500 directory for more information.
We did have AVAST Antivirus installed on the server but this was removed. Any idea's?
Jason.
Consultant | Nerd | Visionary. http://www.ethertech.com.au/ | http://www.deeperstates.com.au

Hi Biswajit et. al., thanks for your help thus far, it is greatly appreciated...
Unfortunately I had already disabled the NIC's on both hosts. They currently remain disabled. I've just tried turning off IPv6 as well and no luck.
PortQry came back fine (I think) :)
=============================================
Starting portqry.exe -n server.apl.local -e 135 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 135 (epmap service): LISTENING
Using ephemeral source port
Querying Endpoint Mapper Database...
Server's response:
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncalrpc:[dhcpcsvc]
UUID: f1ec59ab-4ca9-4c30-b2d0-54ef1db441b7 Isolation Communication Endpoint
ncalrpc:[LRPC00001d40.00000001]
UUID: f1ec59ab-4ca9-4c30-b2d0-54ef1db441b7 Isolation Communication Endpoint
ncalrpc:[LRPC00001448.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[OLE4EF57D32A0DB45F9A64653468D7C]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000012ac.00000001]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncacn_np:\\\\SERVER[\\pipe\\tapsrv]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncalrpc:[tapsrvlpc]
UUID: 2f5f6521-cb55-1059-b446-00df0bce31db Unimodem LRPC Endpoint
ncalrpc:[unimdmsvc]
UUID: 3473dd4d-2e88-4006-9cba-22570909dd10 WinHttp Auto-Proxy Service
ncalrpc:[W32TIME_ALT]
UUID: 3473dd4d-2e88-4006-9cba-22570909dd10 WinHttp Auto-Proxy Service
ncacn_np:\\\\SERVER[\\PIPE\\W32TIME_ALT]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncalrpc:[OLE7C4E3B9B79D8492CBA384F149E08]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncacn_ip_tcp:10.0.0.3[1111]
UUID: 6bffd098-a112-3610-9833-46c3f874532d
ncalrpc:[DHCPSERVERLPC]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncalrpc:[OLE7C4E3B9B79D8492CBA384F149E08]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncacn_ip_tcp:10.0.0.3[1111]
UUID: 5b821720-f63b-11d0-aad2-00c04fc324db
ncalrpc:[DHCPSERVERLPC]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncalrpc:[LRPC00000480.00000001]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 3d267954-eeb7-11d1-b94e-00c04fa3080d
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncalrpc:[LRPC00000480.00000001]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 12d4b7c8-77d5-11d1-8c24-00c04fa3080d
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncalrpc:[LRPC00000480.00000001]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncacn_np:\\\\SERVER[\\pipe\\HydraLsPipe]
UUID: 493c451c-155c-11d3-a314-00c04fb16103
ncacn_ip_tcp:10.0.0.3[1092]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncalrpc:[OLE43978C47C6F54B5499302BAB2F50]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncacn_ip_tcp:10.0.0.3[1090]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncalrpc:[LRPC00001060.00000001]
UUID: 45f52c28-7f9f-101a-b52b-08002b2efabe
ncacn_np:\\\\SERVER[\\pipe\\WinsPipe]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncalrpc:[OLE43978C47C6F54B5499302BAB2F50]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncacn_ip_tcp:10.0.0.3[1090]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncalrpc:[LRPC00001060.00000001]
UUID: 811109bf-a4e1-11d1-ab54-00a0c91e9b45
ncacn_np:\\\\SERVER[\\pipe\\WinsPipe]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncacn_ip_tcp:10.0.0.3[1067]
UUID: f5cc59b4-4264-101a-8c59-08002b2f8426 NtFrs Service
ncalrpc:[LRPC00000d10.00000001]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncacn_ip_tcp:10.0.0.3[1067]
UUID: d049b186-814f-11d1-9a3c-00c04fc9b232 NtFrs API
ncalrpc:[LRPC00000d10.00000001]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncalrpc:[OLE92F283EA5C2F497093CE6A52B7D8]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncacn_ip_tcp:10.0.0.3[1067]
UUID: a00c021c-2be2-11d2-b678-0000f87a8f8e PERFMON SERVICE
ncalrpc:[LRPC00000d10.00000001]
UUID: 50abc2a4-574d-40b3-9d66-ee4fd5fba076
ncacn_ip_tcp:10.0.0.3[1048]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncalrpc:[LRPC000004d4.00000001]
UUID: 906b0ce0-c70b-1067-b317-00dd010662da
ncacn_ip_tcp:10.0.0.3[1032]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[audit]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[securityevent]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[protected_storage]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[dsrole]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncalrpc:[NTDS_LPC]
UUID: e3514235-4b06-11d1-ab04-00c04fc2dcd2 MS NT Directory DRS Interface
ncacn_http:10.0.0.3[1027]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[audit]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[securityevent]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[dsrole]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncalrpc:[NTDS_LPC]
UUID: 12345778-1234-abcd-ef00-0123456789ab
ncacn_http:10.0.0.3[1027]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[audit]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[securityevent]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[dsrole]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncalrpc:[NTDS_LPC]
UUID: 12345778-1234-abcd-ef00-0123456789ac
ncacn_http:10.0.0.3[1027]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[audit]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[securityevent]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[protected_storage]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[dsrole]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncalrpc:[NTDS_LPC]
UUID: ecec0d70-a603-11d0-96b1-00a0c91ece30 NTDS Backup Interface
ncacn_http:10.0.0.3[1027]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[audit]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[securityevent]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[protected_storage]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[dsrole]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncalrpc:[NTDS_LPC]
UUID: 16e0cf3a-a604-11d0-96b1-00a0c91ece30 NTDS Restore Interface
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[audit]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[securityevent]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[protected_storage]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[dsrole]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncalrpc:[NTDS_LPC]
UUID: 12345678-1234-abcd-ef00-01234567cffb
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_np:\\\\SERVER[\\PIPE\\lsass]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[audit]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[securityevent]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[protected_storage]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_np:\\\\SERVER[\\PIPE\\protected_storage]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[dsrole]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_ip_tcp:10.0.0.3[1026]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[NTDS_LPC]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncacn_http:10.0.0.3[1027]
UUID: 12345678-1234-abcd-ef00-0123456789ab IPSec Policy agent endpoint
ncalrpc:[OLE8B33809919104CE5B44970B01637]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncalrpc:[wzcsvc]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 1ff70682-0a51-30e8-076d-740be8cee98b
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncalrpc:[wzcsvc]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 378e52b0-c0a9-11cf-822d-00aa0051e40f
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncalrpc:[wzcsvc]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncalrpc:[OLE396AE4FBEFCC4DD2B44D0F0A3691]
UUID: 0a74ef1c-41a4-4e06-83ae-dc74fb1cdd53
ncacn_np:\\\\SERVER[\\PIPE\\atsvc]
UUID: 3c4728c5-f0ab-448b-bda1-6ce01eb0a6d5 DHCP Client LRPC Endpoint
ncalrpc:[DNSResolver]
Total endpoints found: 125
==== End of RPC Endpoint Mapper query response ====
portqry.exe -n server.apl.local -e 135 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 389 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 389 (ldap service): LISTENING
Using ephemeral source port
Sending LDAP query to TCP port 389...
LDAP query response:
currentdate: 01/28/2013 14:11:54 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
UDP port 389 (unknown service): LISTENING or FILTERED
Using ephemeral source port
Sending LDAP query to UDP port 389...
LDAP query response:
currentdate: 01/28/2013 14:11:57 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
UDP port 389 is LISTENING
portqry.exe -n server.apl.local -e 389 -p BOTH exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 636 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 636 (ldaps service): LISTENING
portqry.exe -n server.apl.local -e 636 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 3268 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 3268 (msft-gc service): LISTENING
Using ephemeral source port
Sending LDAP query to TCP port 3268...
LDAP query response:
currentdate: 01/28/2013 14:11:57 (unadjusted GMT)
subschemaSubentry: CN=Aggregate,CN=Schema,CN=Configuration,DC=apl,DC=local
dsServiceName: CN=NTDS Settings,CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
namingContexts: DC=apl,DC=local
defaultNamingContext: DC=apl,DC=local
schemaNamingContext: CN=Schema,CN=Configuration,DC=apl,DC=local
configurationNamingContext: CN=Configuration,DC=apl,DC=local
rootDomainNamingContext: DC=apl,DC=local
supportedControl: 1.2.840.113556.1.4.319
supportedLDAPVersion: 3
supportedLDAPPolicies: MaxPoolThreads
highestCommittedUSN: 1310788
supportedSASLMechanisms: GSSAPI
dnsHostName: SERVER.apl.local
ldapServiceName: apl.local:[email protected]
serverName: CN=SERVER,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=apl,DC=local
supportedCapabilities: 1.2.840.113556.1.4.800
isSynchronized: TRUE
isGlobalCatalogReady: TRUE
domainFunctionality: 2
forestFunctionality: 2
domainControllerFunctionality: 2
======== End of LDAP query response ========
portqry.exe -n server.apl.local -e 3268 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 3269 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 3269 (msft-gc-ssl service): LISTENING
portqry.exe -n server.apl.local -e 3269 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 53 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 53 (domain service): LISTENING
UDP port 53 (domain service): LISTENING
portqry.exe -n server.apl.local -e 53 -p BOTH exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 88 -p BOTH ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 88 (kerberos service): LISTENING
UDP port 88 (kerberos service): LISTENING or FILTERED
portqry.exe -n server.apl.local -e 88 -p BOTH exits with return code 0x00000002.
=============================================
Starting portqry.exe -n server.apl.local -e 445 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 445 (microsoft-ds service): LISTENING
portqry.exe -n server.apl.local -e 445 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 137 -p UDP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
UDP port 137 (netbios-ns service): LISTENING or FILTERED
Using ephemeral source port
Attempting NETBIOS adapter status query to UDP port 137...
Server's response: MAC address 000423c733ec
UDP port: LISTENING
portqry.exe -n server.apl.local -e 137 -p UDP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 138 -p UDP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
UDP port 138 (netbios-dgm service): LISTENING or FILTERED
portqry.exe -n server.apl.local -e 138 -p UDP exits with return code 0x00000002.
=============================================
Starting portqry.exe -n server.apl.local -e 139 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 139 (netbios-ssn service): LISTENING
portqry.exe -n server.apl.local -e 139 -p TCP exits with return code 0x00000000.
=============================================
Starting portqry.exe -n server.apl.local -e 42 -p TCP ...
Querying target system called:
server.apl.local
Attempting to resolve name to IP address...
Name resolved to 10.0.0.3
querying...
TCP port 42 (nameserver service): LISTENING
portqry.exe -n server.apl.local -e 42 -p TCP exits with return code 0x00000000.
Jason.
Consultant | Nerd | Visionary. http://www.ethertech.com.au/ | http://www.deeperstates.com.au

Migration From SQL Server 2005 to Oracle DB through Oracle SQ Dev Problem

Hi all,
we are trying to do a full Migration from MS SQL Server 2005 to Oracle DB 9.2 i
we are using Oracle SQL Developer V 1.5.3,
the capturing of the DB and the conversion to the oracle model completed succefully
however when we try to generate the scripts from the converted model
the script generation hangs on a sequence and no further progress is made (the script generation pop up keeps still on a certain sequence displaying its name, and thats it )
no error messages are displayed,
how can we know the reason for this? or atleast find a log for whats happening...
any suggestions?
Thank you

Hi,
migrating a sequence shouldn't make a problem. I did a quick test. I created this table in SQL Server:
create table test_seq (col1 int identity(1,1),col2 char(1))
Then I captured the table, converted the table and generated the script. There was no problem.
CREATE SEQUENCE succeeded.
CREATE TABLE succeeded.
Connected
TRIGGER test_seq_col1_TRG Compiled.
As you see, applying the script was also successful.
I am using Oracle RDBMS 11g, I don't know whether this makes a difference. Do you have any 11g instance available to test it?
Can you show me one of the sequences that are causing the hang? Is the CREATE SEQUENCE statement already in the generated script, or not? Your table is for sure more complex than my simple example.
Regards,
Wolfgang
Edited by: wkobargs on Jan 13, 2009 3:01 AM

Migrate from Server 2003 (no Exchange, single server) to SBS 2011

Are there any Technets or other Microsoft documentation on migrating from Server 2003 (no Exchange, single server) to SBS 2011? I understand it is possible, but I would like confirmation and some documentation before purchasing the appropriate hardware
and licenses.
Thanks,
Doug
Doug Orr

Hi Doug,
In general, the migration is the similar with migrating process from SBS 2003. In addition, also have main
difference.
“The main difference is that you don’t have to remove the source and that you have to follow the migration
instructions as the SBS migration wizard will not launch.”
You can get above description from following similar thread. Please refer to.
Migrate from Windows Server Standard 2003 (not SBS) to SBS 2011
http://social.technet.microsoft.com/Forums/en-US/68790e41-b833-4e81-8200-63852ab9e196/migrate-from-windows-server-standard-2003-not-sbs-to-sbs-2011?forum=smallbusinessserver
Meanwhile, please refer to the following article. It may be helpful.
Step By Step Guide To Migrating To SBS 2011
http://www.techieshelp.com/step-by-step-guide-to-migrating-to-sbs-2011/
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft
does not guarantee the accuracy of this information.
However, as Robert suggests, would you please confirm specific version of SBS? It may help us to understand
clearly and provide correct information.
Hope this helps.
Best regards,
Justin Gu

Migration from SQL Server 7 to oracle 8.1.7 on windows 2000 professional

Hello All,
I am currently working on Database migration from sql server 7 to oracle 8.1.7.
My setup is as follows:
1. Both the databases (sql server and oracle are on the same machine )
2. My sql server database contains 200 tables and 190 stored procedures, which need to be migrated to oracle.
When i am trying to capture the Source database details, its capturing evry thing but when its mapping at the end ...it says "MAPPING ROLE PUBLIC" and its not proceeding furthur..What do u want me to do ? i waited for approx 1 hr , still its not proceeding....How to resolve this bug ?
Also please suggest me the best methodology for Migrating the stored procedures. allmost all my stored procedures have TEMP Tables implemented in it. Please help me in this...
Also please let me know the Timeframe estimate for this total thing to be done..
Waiting for your reply,
Thanks and Regards
SAI SREENIVAS JEEDIGUNTA

You can user Oracle Migration Workbench to migrate from SQL Server to Oracle.
Here is the link which gives info on software usage and download :
http://otn.oracle.com/tech/migration/workbench/content.html
Chandar

Migration from Small business server 2011 standad to Windows 2012 Server Standard

Hi everyone,
I have a network with SBS 2011 standard (that is the only server) and now we are moving (migrating) to windows 2012 server standard with an exchange 2013 (not yet installed).
The main thing is that when trying to install the migration tool on the SBS server, it will not install because it is not a 2008 R2 server.
is there a workaround for this problem?
I Hope this will help. Amir Ovadia

Hi,
Would you please first let me know how did you perform the migration? Regarding the migration tool, is it the Windows Server Migration Tools in Windows Server 2012 R2? Since you need to install
the Windows Server Migration Tools on the source SBS 2011 server, I suggest we could perform the following steps to install it.
Create deployment folders for ource computers by running the
smigdeploy.exe tool (included with Windows Server Migration Tools) on your destination server.
Register Windows Server Migration Tools on source computers that are running Windows Server 2012, Windows Server 2008 R2, Windows Server 2008, or Windows
Server 2003 by using SmigDeploy.exe.
For details, please refer to the following article.
Install, Use, and Remove Windows Server Migration Tools
http://technet.microsoft.com/library/jj134202
In addition, here are some similar threads about how to perform the migration from SBS to Windows Server 2012 Standard, maybe they are useful to us.
how to Migrate sbs 2011 to Standard 2012 server
http://social.technet.microsoft.com/Forums/en-US/e1d4b09f-8857-4ef6-9a80-6a906e76b688/how-to-migrate-sbs-2011-to-standard-2012-server
Migrate SBS 2011 to Server 2012 Standard
http://social.technet.microsoft.com/Forums/en-US/f552ef12-07a9-4f7a-bf5e-24500c3e1dc3/migrate-sbs-2011-to-server-2012-standard
Migrating from Windows SBS 2011 Essentials to Windows Server 2012 Standard
http://social.technet.microsoft.com/Forums/en-US/41d17523-c6ae-4ba6-851f-a42b16f31d2a/migrating-from-windows-sbs-2011-essentials-to-windows-server-2012-standard
As there is no specific documentation on migrating from SBS to Windows server 2012, if you want the step by step procedure about the migration, we’d better involve
SBSMigration.com for detailed information.
Thanks.
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Howto migrate from corrupt 10.4 server to fresh 10.4 server

Similar Messages

Maybe you are looking for