Howto to filter russian undeliverable-messages?

We got hundreds of such messages this weekend:
Ihre Nachricht hat einige oder alle Empfänger nicht erreicht.
Betreff: Новинка на рынке баз данных
Gesendet am: 06.04.2008 18:56
Folgende Empfänger konnten nicht erreicht werden:
[email protected] am 06.04.2008 20:43
Das E-Mail-Konto ist in der Organisation, an die diese Nachricht gesendet wurde, nicht vorhanden. Überprüfen Sie die E-Mail-Adresse, oder setzen Sie sich direkt mit dem Empfänger in Verbindung, um die richtige E-Mail-Adresse herauszufinden.
- mail.test.kolomna.ru #5.1.1 X-Postfix; unknown user: "[email protected]" -
Is it possible to activate a Content Filter for mails with characters like this:Новинка на рынке баз данных
How could I create a filter-combination with 'undeliverable-messages' and foreign characters like the above one?

Could you please tell me some practical advantages/disadvantages about "bounce verification"?
The advantage is easy - you'll never get a bounce for a message that didn't actually originate from your network. Only bounces that are for a message that passed through one of your IronPort's on the way out will be allowed back into the network. This means that real bounces still make it, but bounce spam/etc don't.
There are a few disadvantages, which can basically be put into two categories. These may or may not effect you - it just depends on your environment.
The first is that for BV to work, all mail from your domain needs to go out through your IronPorts. For most companies this shouldn't be an issue - you really dont want your staff sending email "from" your company, but originating outside of your network. For an ISP or the like this is different, and much harder to enforce. Outgoing mail that doesn't go through the IronPort's will still work - but if it bounces then the bounce will be blocked as invalid.
The second problem is that although BV is fully RFC compliant in what it does, some remote hosts have issues with how it's implemented. Generally these are very few and far between, and can be handled relatively easily with a whitelist. Unfortunately there's very little IronPort can do for these corner-cases as the problem is isn't on our end - it's on the remote end.
All of this presumes that the message is actually a "bounce" (ie, an NDR). If it's just a normal message that is made to look like a bounce then BV doesn't help - but in that case you should be forwarding the message through to [email protected] so that we can write a rule and get it pushed out.

Similar Messages

I want to delete my mobile me account not just from my iPhone but from existence. I want to delete it so that no emails can be received to it, and the sender would receive an undeliverable message. Is this possible?

I want to delete my mobile me account not just from my iPhone but from existence. I want to delete it so that no emails can be received to it, and the sender would receive an undeliverable message. Is this possible?

No, you can stop using the account, but you cannot delete it.

Canon Pixma MP610 fails to print and returns a " Stopped - 'Filter' failed" error message.

Hi, I have updated to latest OS and now my Canon Pixma MP610 fails to print and returns a " Stopped - 'Filter' failed" error message.
I am running OS X 10.9.3 (13D65) on a 3.4 GHz Intel Core i5 iMac with 8 GB 1600 MHz DDR3
I've done a complete system re-install and also performed a targetted install of just the Canon Drivers - but all to no avail.
The printer is OK with regard ink-levels and is/was working fine. It will print out 'photocopies' independantly of the iMac. Additionally, from within the Print Queue I can view the ink-levels so there are comms between the iMac and the Canon - it's just that 'Print' seems to be off topic.
Can anyone help as I have to get a document out tonight
Many thanks in advance
S

Is that device desSystem Preferences - Print & Scan - Right click the printer and select Reset Printing System. DO NOT use any Canon software.
You did not advise how it is connected (USB- Wi-Fi- etc..) so it's a little difficult to assist with so little information.

Why do I receive "Undeliverable" messages when I sent no emails to the party involved?

I am receiving these "undeliverable" messages which are sent to German locations. They are all in German and they were not sent from my computer. Should I be worried? How do I bring this to an end?

http://en.m.wikipedia.org/wiki/Backscatter_(email)

How to block the undeliverable message internally?

How to block undeliverable message internally in case the internal sender sent email to one oversize internal recipient?
Thanks a lot

Exchange 2010/Outlook 2010
Sorry for posting in such an old thread, but I have a similar issue:
We have a mailing list account that receives thousands of Undeliverable messages every day.
Could I use ECS to tell Exchange to Reject Messages From "MicrosoftExchange[long string]@domain.com?
What would happen to the Undeliverable messages? Are there any problems with this?
Thank you!
-R
Edit: that solution did not block the DSNs.
I also tried creating a transport rule to delete all e-mail going to that account, but that only worked for personal e-mails, not DSNs.
One solution I was able to come up with was to set a mail rule that sends everything to a subfolder. This will prevent the mailbox from hitting the "100,000 items in critical path folders" best practice.
The second solution I am testing is to create a Mailbox Retention Policy to permanently delete all items older than 7 days.

UTL_SMTP redirect undeliverable messages to a different address

Hi everyone,
I am using UTL_SMTP to send out email messages. The email address I am sending this from is a high profile address and he does not want to receive bounce back message about underliberable email.
Is there functionality n UTL_SMTP to re-direct these underliverable messages to a different email address?
Thanks

user13118348 wrote:
Hi everyone,
I am using UTL_SMTP to send out email messages. The email address I am sending this from is a high profile address and he does not want to receive bounce back message about underliberable email.
Is there functionality n UTL_SMTP to re-direct these underliverable messages to a different email address?In short, No.
Once an email is sent via Oracle it goes to an SMTP server (email server) from where it get's sent on to the destination email server to attempt delivery.
If an address is undeliverable, the message comes back to the sending email server from where the owner of the address can see the message.
Nothing comes back from the mail server to Oracle and there's no way it can. Once Oracle has sent the message outbound to the mail server it's no longer anything to do with Oracle (you will know this because your procedure will return control to the next line of code etc.) Whether an email address is undeliverable or not isn't something that is known until the destination email server receives the message or after several attempts by the sending server etc., and that could take a matter of minutes, hours, or even days before it's known. You can't expect the email server to somehow report that back to Oracle.
So, options are...
Provide a sender email address in your message that isn't this persons email address, so anything coming back goes somewhere else (or automatically in a trashcan), or
Set up mailbox rules on this persons email account so that any "undeliverable" messages automatically get put to a certain folder, or deleted or whatever.
The issue needs resolving at the email server side of things, not Oracle.

Undeliverable messages. Error is [0x80040107-0x80040107-0x000501]

User reported undeliverable messages, sent to external email addresses. All bounced back messages have the same notification message:
"This message could not be sent. Try sending the message again later, or contact your network administrator. The client operation failed. Error is [0x80040107-0x80040107-0x000501]"
I am trying to track down the error codes and have found nothing on this particular code sequence. Is there a Error code guide that might provide some insight?
Thank you

Jesper,
Thank you for the response, sorry it took so long to get back. I am trying to track down any documentation that might tell me what this error code is:
[0x80040107-0x80040107-0x000501]
However, here is the information you asked about:
Machines: Windows 7 Enterprise SP1, 64bit
Outlook Client: Outlook 2013 (15.0.4667.1000) 32-bit, Symantec Outlook Integration Disabled, mailboxes partially cached (1month)
Exchange Design:Exchange 2013 SP1, Win 2012 server 1 DAG, F5 load balancer, serving up autodiscover and email connectivity. Client not local to the Exchange servers, connected by 3x 10MB links
Single user reported issue emailing to 2 external email accounts.
Let me know if you need more informaiton
Thank you
Stephen

Exchange 2007 when sending a calendar invite, a non-existent delegate shows up in an undeliverable message

I had a test user that was removed. When it was removed, it was still listed as a delegate on someone's email. Now, whenever a Calendar invite is sent to the existing user, the sender receives an undeliverable message. The existing user does not receive
notification of a calendar event, but the event does show up in the calendar.

Hi,
If the delegate user account or mailbox has been removed from domain or Exchange server, please also remove the delegate settings with this account.
If a user is set as a delegate for a manager, the meeting request which is send to the Manager would be forwarded to the delegate automatically and ask for approving in the delegate side.
Please do the following steps in the Manager’s Outlook client to remove the delegate settings for this non-existent delegate:
1. Open the Manager’s Outlook.
2. Click File > Account Settings > Delegate Access.
3. In the Delegate list, click the non-existent delegate, click Remove.
4. Click OK to save the settings.
Then check whether the issue persists.
Regards,
Winnie Liang
TechNet Community Support

I send an email to several people and I get an undeliverable message, how do I know which one is undeliverable

I send out a news letter for the Lions Club and involves 30 different people. Sometimes I get an undeliverable message and I don't know which address did not get delivered. How can I find out which one was not delivered so I can make sure I have all the correct data.

Don't you get a full report? the message text look like this from my isp.
The following message to <[email protected]> was undeliverable.
The reason for the problem:
5.1.0 - Unknown address error 550-'5.1.2 <[email protected]>: Recipient address rejected: Domain not found'
Reporting-MTA: dns; ipb1.telenor.se
Final-Recipient: rfc822;[email protected]
Action: failed
Status: 5.0.0 (permanent failure)
Remote-MTA: dns; [213.150.xxx.xx]
Diagnostic-Code: smtp; 5.1.0 - Unknown address error 550-'5.1.2 <[email protected]>: Recipient address rejected: Domain not found' (delivery attempts: 0)

English SharePoint 2013 Implementation Shows Russian Error Messages

I was attempting to do a repair on my SharePoint 2013 installation . I did so by coing to control Panel/ Programs . Selecting SharePoint Server 2013 then Change . On the dialog I selected Repair then it show a Russian error message in the subsequesnt
dialogue
"Microsoft SharePoint Server 2013 configuration did not complete successfully
Ошибка 1706.Необходимые файлы не найдены. Проверьте подключение к сети или работоспособность дисковода для компакт-дисков. Сведения о других возможных способах решения этой
проблемы см. в C:\Users\SVC_SP~1\AppData\Local\Temp\Setup00001a80\SETUP.CHM."
Both my Windows Server 2012 and SharePoint Installation were done in English . This is the first i'm seeing Russian Anywhere . Why would it be Showing me Russian Error Messages ?

Instead of Trying through control panel,I would recommend try running the SetUp.exe and choose the repair option.did you able to see the same file that mentioned in the path?
Anil Avula[Partner,MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

Exchange "Undeliverable" messages not showing

Hi
I use Mail to access my employer's Exchange server. It works pretty well except for one problem. If I send an email to a full mailbox, then the Exchange system sends me back a message saying it was Undeliverable. I can see these messages quite clearly when I use Outlook, but they just don't show up in Mail! Even stranger, I know when such a message has arrived because Mail's unread message counter clicks up by one, but then goes back down again when I click on the In Box folder.
I've checked my connection and spam killer settings but I can't see anything wrong.
Help please!
Bob

Hi,
As what Andy says, it is by design that to avoid poor performance in Exchange Server, the default Get-MailboxStatistics cmdlet does not retrieve the mailbox quotas and does not display a value in the
StorageLimitStatus field.
If you want to check the mailbox which is reached to mailbox quota and receive the quota warning, we can try the following command, for example:
Get-MailboxStatistics winnie2 | fl *quota*,*size*
If the TotalItemsSize value is bigger than DatabaseIssueWarningQuota value, this mailbox user would receive the quota warning messages.
If you want to know the mailbox status for the whole database, we can compare the TotalItemSize value with DatabaseIssueWarningQuota value in the following command results:
Get-MailboxStatistics -Database "Mailbox Database 1294421375" | ft displayname,*quota*,*size
Regards,
Winnie Liang
TechNet Community Support

OSB - Looking for howto's on multi machine message delivery.

Hi.
I am very new to Oracle Service Bus.
I want to setup two machines, A and B.
I want A to take service calls from BPEL, deliver them to B and have B deliver them to their final service, returning the reply back to A and finally BPEL.
The communications between A and B can be unreliable, ie, B can wander off into the ether, for long periods, days, weeks, before returning.
There is no expectation that A will ever 'disappear' and will always be there to talk to BPEL.
Is there a howto or something that I can use to setup something like this?
Am I even on the right track?
Any assistance would be greatly appreciated.
...Lyall

Thankyou, just the sort of thing I am looking for, advice on telling me what I am doing wrong.
So, you are saying that I don't have OSB on Machine A but only have it on Machine B, listening on the end of a JMSQ.
However, my end game scenario involves a central machine A with many satellite machines, B, C, D, etc.
As I am a complete noob at OSB/WebLogic, I figure, for administrative purposes, I would have an OSB on A which was the administrator of the domain, which extends out to B, C, D, etc.
So, in that case, OSB on A's sole role would be admin server whilst on B, C, D, etc, would be the actual processing. This would alleviate me having one admin console for each machine.
Does this sound logical?
To the above end, I am playing with OSB 10gR3 and I can create a domain using the configuration wizard and boot the admin server.
I seem to have endless problems trying to start up a managed server for the domain. I always get a message similar to the following
"Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted."
I have tried re-creating the boot.properties file, as per other posts on in these forums, to no avail.
I have tried a cold install of OSB, run the config wizard, add a machine and managed server within the config wizard and the thing still wont boot.
I have tried creating the server and machine using the admin console web pages, no success.
I just can't seem to get a managed server to boot, out of the box!
Once again, thanks for your help.
...Lyall

Bug report: Russian Translation Messages

There are several incorrectly translated messages. Better translation is below. English original is back-translated, so could be not exact in all cases. Russian text should be replaced.
Mail - Setup - View/Actions (Почта - настройки - отображение и действия) - "удалить подтверждение сообщения" (remove message confirmation) should be "подтверждение удаления сообщения" (confirm message removal)
Blackberry World Setup / General(Общие настройки) - 'Cохранить на карту памяти' (save once to SD card) should be 'Cохранять на карту памяти' (usually save to SD card)
Blackberry World Payment methods - 'Методы оплаты' should be 'Способы оплаты'
Clipboard Select / Select all should be 'Выделить' / 'Выделить все' (as select/highlight), not 'Выбрать' / 'Выбрать все' (as 'choose') phone-wide
SMS is translated as 'Текстовые сообщения' (Text Messages) in Russian. Untranslated 'SMS' or at least 'Сообщения' (messages) is much more common for Russia.
A message after doing a software update check is not correct: 'В настоящее время установлена самая последняя версия ПО' (Latest software version is currently installed) - should be 'В настоящее время установлена последняя доступная версия ПО' (Latest available software version is currently installed)
"Ожидание подключения для передачи данных" message (Waiting for data connection) during set-up doesn't fit the screen, should be wrapped or cut.
"Новый часовой пояс <...> время отправлено" (New timezone... time sent) notification during the initial set-up should be 'время установлено' (time set).
Cheers,
Alex

This could be related to another bug reported here recently:
E-mail looses all images if mail server doesn't accept outgoing email...
You cannot count on Apple looking into this or even noticing it if you report it here, so I suggest you the same I suggested in the other thread, i.e. report it in one of the following places:
http://www.apple.com/macosx/feedback/
http://developer.apple.com/bugreporter/

Undeliverable Messages Coming Back Randomly

Just in the last week, we've had a handful of users receive bounce back messages saying they were not delivered. Generally, it will tell you what the issue is (user does not exist, attachment too large, etc.) but this one is no help. It is happening to internal
and external emails. If the user gets the bounce back, closes Outlook, reopens Outlook and then tries sending it, it seems to go through. Below is the error in the Undeliverable reply. I don't see any errors in the Event Viewer on the Exchange Server. I've
rebooted it but we're still having it occur.
'Receipient Name' on 1/2/2015 2:40 PM
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].

Hi pantherguy,
Generally, Error [0x80004005-00000000-00000000] is caused by Message limits.
Pls check this helpful threads:
1 .
http://blogs.technet.com/b/asiasupp/archive/2011/06/10/messages-are-not-delivered-after-you-send-messages-to-a-large-number-of-recipients-by-using-an-office-365-account.aspx
2.
http://serverfault.com/questions/651868/exchange-2010-sp3-update-rollup-8-outlook-ndr-errors
I would also suggest you to check event logs for any exchange store issue.
Thanks , Prakash <br/> Please Note: My Posts are provided “AS IS” without warranty of any kind, either expressed or implied.

Sun Messaging Server - Filter based on Message Type

Hi,
Can I do the filtering based on the message type like Voice mail, text mail.. ?
and also can I filter the messages based on the user?

sunstore wrote:
I am looking at filtering more so at the IMAP Level. I would like to only provide certain messages to clients using IMAP using Server Side filters based on message headers. There are no apis/interfaces to "filter" IMAP operations.
Please let me know if this possible. Also i would like to restrict IMAP access to certain users only. Is that possible ? You can restrict IMAP access by using the mailAllowedServiceAccess: attribute:
http://docs.sun.com/app/docs/doc/819-4437/6n6jckqu5?a=view
Regards,
Shane.

Howto to filter russian undeliverable-messages?

Similar Messages

Maybe you are looking for