Howto use on both macOSX and Windows XP?

The last ipod I owned could be plugged into the usb port of 'any' computer (well, any mac or pc)(that model was formatted for windows), but my latest 5G model asks to be reformatted if I try to run it with windows (this time I have formatted my ipod for mac) and thus cant be used with windows which is a pain because I own an imac that also runs window and would like to simply use my ipod and add the odd song on windows too! Surely the 5g ipod isnt this unflexible?
Does anyone know any solutions? any advice appreciated
Joe

"i thought he was talking about music, because u cannot put music onto a windows formatted iPod on a Mac, I have tried."
You are mistaken and when you tried something else must have been wrong. I have had my 80GB iPod about 6 months or so now and it has always been formatted in Windows format and is exclusively used on my eMac running Mac OS 10.3.9.
As Chris already pointed out, Macs can read Windows formatted iPods and can certainly put songs on them. The roughly 7500 songs on my Dos formatted iPod put their by my Mac proves that.
Patrick

Similar Messages

External hard drive use with both Mac and Windows

I know that you can't use an iPod (through iTunes) with both Mac and Windows, but can you still use it as an external hard drive with both operating systems?

Yes, if the iPod is in Windows format. Mac OS X can read and write Windows formatted iPods, but Windows can't access Mac formatted disks unless special software is installed.
(9844)

I have an external drive - WD My Passport FOR MAC. I want to format it to work on both mac and windows. Which format do you think I should use? Will either one cause damage to the files on the hard drive?

I have an external hard drive - WD My Passport FOR MAC. I want to format it to work on both mac and windows. I also want to be able to connect it to my TV and watch movies.
I read up and I think I am supposed to use exFAT or FAT32? I also saw MS-DOS. Which format should I should use? Will any of them cause damage to the files on the hard drive?
My little memory stick uses MS-DOS and it works on both mac and windows.
Please can you just tell me a little about each and suggest which one to use.
I know how to change it once you tell me so don't waste your time writing about changing it.

Will any of them cause damage to the files on the hard drive?
WARNING: FORMATTING A DRIVE ERASES IT COMPLETELY !!
If you need to carry large files (e.g., larger than about 4GB) back and forth, you may need ExFAT. Otherwise MS-DOS works for smaller files.
The Mac can Read, but not write Windows New Technology File System (NTFS) without an add-on program such as Paragon NTFS.

Both xp and windows 7 have video problems with my VGA connection using TV

both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

What type of hard disk should I use if I want to use it on mac and windows?

Hey Forum,
I am using windows xp on my macbook (snow leopard). I came across some dealers who say that there are hard disks for mac only and for both mac and windows. So, I wanted to buy a hard disk so that I can use it both on mac and windows xp, so what type of hard disk should I use? Must I partition into 2?
or are there any harddisk in the market which is compatible for both mac and windows xp without screwing up the format(NTFS/Mac OS X Journaled)? Pls look into this matter and help me with it.
All of your replies and suggestions is much appreciated.
Thank you.
Ala.

Run, don't walk, from that dealer! and never look back
Once in a very long while Apple will have customized firmware on drives, and it is possible to find SCSI/SAS or drives that are destined to be used with high end storage controllers.
But that is the exception that makes the rule.
SATA is SATA. Though.... there are now SATA III drives that don't work in XP, or that need a jumper, and Seagate and some drives have managed to deliver firmware that has caused trouble... and Apple has had to issue firmware updates to help compatibility....

I have partitioned my time capsule, but I can't get it to work as a Time Machine back up and permanent media server for both mac and PC. What format do I need to partition the drive to so that it works for both mac and windows and so that it will be visab

I have partitioned my time capsule, as I want part of it to act as a media server for both mac and windows. However I don't know what format that I need to partition it to. I also can't make it a permanently accesible drive. I want to restore the drive to the original format (which I don't know) and start again and re-partition the drive in a format that can be used for media by both mac and PC and for time machine back-ups and make the media part of it permanetly accesible so I can add and acccess my files.
Thanks

You are mixing up a couple of things here.
The TC drive cannot be partitioned without removing it.. did you do that?
If you partition it you must use a Mac disk utility and use the HFS+ ie standard Mac format. And GUID partition table not windows type.
You can select erase disk in the airport utility.. that will take the disk back to original format. No partitions. TC is deliberately not partitioned as it is not a media server.. it is a backup device for TM. Over time .. the disk will be filled with TM backups so you have a long history of file changes to your computer.
There is no media server in the TC.. it is merely disk storage.. you can serve files from it to a media device.. but the TC itself is dumb as dumb.
Now the actual format of the drive is irrelevant to the PC.. The TC offers SMB file services to the network. You can copy files to and from the TC as if it was a local disk without caring one iota about the format. The TC handles that .. it is not a local disk .. it is a network drive.
Although you cannot partition the TC. you can still copy files to it.. this does have implications for TM.. but as long as there is plenty of free space should not be a major issue.
You can create a disk image via the disk utility in a Mac.. and as stated you can create partitions if you do it on a Mac with the disk directly connected which means breaking warranty if any exists on the TC.

Can I mount my external hard drive which will be compatible with both Mac and Windows?

Hello,
Can I mount my external hard drive which will be compatible with both Mac and Windows? If yes, then please let me know, because I intend to use my hard drive for both Windows and Mac, without losing any file.

Yes. By default, Mac OS X and Windows can read and write drives which are formatted as FAT32 or exFAT; NTFS drives aren't writable from Mac OS X without additional software.
(124553)

IPod with both Mac and Windows?

I have a Mac at work and a PC at home. I have my iPod nano set-up with my work computer but I would also like to use it on my home computer. I downloaded the Windows iPod updater, however, it won't let me update....only restore. If I restore, and it loses all my data, can I then hook it back up to my Mac to gain my data back from iTunes. Can I have both Mac and Windows software on my nano at the same time? Or do I have to stick with one system?

Chris, maybe you can help with my situation. It's the opposite from Jilly's. My wife uses her Nano with a PC; I'd like to share some of the stuff on my Mac with her. Can I Restore without losing what she's got already? (And then use the Nano with both computers thereafter...)
TIA,
Jeff

Install CS5 on both Mac and Windows

Hi all,
I have an Adobe CS5 Design premium which I have been using for 2 years now. Recently, I switched to a Macbook Pro with Bootcamp, which allows me to dual-boot to Windows. Does my CS5 license allow me to dual-install on BOTH Mac and Windows OSes on the same laptop (technically, I am not installing on separate machines). If yes, how do I do so? It seems like my installation DVD is for Windows only.
Appreciate any clarifications. Thanks.
Wayne

Your serial number is only good for Windows, as well as the version of the software that goes with it.

Problems using RMI between linux and windows.

I have problems using RMI between linux and windows.
This is my scenario:
- Server running on linux pc
- Clients running on linux and windows PCs
When a linux client disconnect, first time that server try to call a method of this client, a rmi.ConnectException is generated so server can catch it, mark the client as disconnected and won't communicate with it anymore.
When a windows client (tested on XP and Vista) disconnect, no exceptions are generated (I tryed to catch all the rmi exception), so server cannot know that client is disconnected and hangs trying to communicate with the windows client.
Any ideas?
Thanks in advance.
cambieri

Thanks for your reply.
Yes, we are implementing a sort of callback using Publisher (remote Observable) and Subscribers (remote Observer). The pattern and relative code is very well described at this link: http://www2.sys-con.com/ITSG/virtualcd/java/archives/0210/schwell/index.html (look at the notifySubscribers(Object pub, Object code) function).
Everything works great, the only problem is this: when a Publisher that reside on a Linux server try to notify something to a "dead" Subscriber that reside on a Windows PC it does't receive the usual ConnectException and so tends to hang.
As a workaround we have solved now starting a new Thread for each update (notification), so only that Thread is blocked (until the timeout i guess) and not the entire "notifySubscribers" function (that contact all the Subscribers).
Beside this, using the Thread seem to give us better performance.
Is that missed ConnectException a bug? Or we are just making some mistake?
We are using java 6 and when both client and server are Linux or Windows the ConnectException always happen and we don't have any problem.
I hope that now this information are enough.
Thanks again and greetings.
O.C.

How to increase Boot Camp partition without harming both Mac and Windows partition

Hello Apple Support Communities.
I have made a Boot Camp partition with my Mac partition, but the problem is that I am running out of space on my Windows partition. (Darn you, Steam Summer Sale! )
Anyways, is there any way to increase the space on my Windows partition without harming both Mac and Windows partitions. I would prefer if I didn't need to delete the Windows Partition and do everything all over again, as I need to download and set up everything all over again. I also know that changing the Windows partition is a tricky and hard thing, and one step can harm my whole computer, but I think that it is worth the risk.
I really don't care how to do it, anything, from a bootable program, to anything. I just want to know how to do it.
So is there any way that I can increase the Windows partition of my Mac without harming both Mac and Windows partitions? Thanks.

This cannot be done using Boot Camp Assistant. But, you can try using Paragon Camptune X for Mac® – How it works.

I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents?

I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents? I am planning to transition to a Mac so using the iCloud seems to make the most sence.

No, it is not a backup method at all. If you delete a sync'd file on any device, you delete it permanently from iCloud. That by its very essence is not a backup solution therefore. A backup solution does not automatically and simultaneiously delete the file everywhere when it is deleted from the original source.
iCloud is strictly a syncronization tool for using files on multiple internet connected devices.

My iPhone will not send an iMessage. It sends everything as SMS. I have ensured that my Apple ID is signed in and that my phone number is enabled for use in both FaceTime and iMessage

My iPhone will not send an iMessage. It sends everything as SMS. I have ensured that my Apple ID is signed in and that my phone number is enabled for use in both FaceTime and iMessage

I had the same problem. I went in and added my email address to iMessage and deleted the text to my friends that have iPhones and sent another to test it and it worked. Only thing is now my non iPhone friends don't receive my pic text. I had to turn off iMessage for it to work. Apple needs to fix this ASAP!

Get an error for changing the windows authentication mode to the both SQL and windows authentication mode

I installed the SQL server Express 2008 R2 and then SQL Server Management Studio 2008 R2 . But during the installation, I could not choose the both SQL and windows authentication mode and an error accrued so I did that just with windows authentication mode.
Now, I want to change the windows authentication mode account to the SQL authentication mode but it shows me an error which is you do not have permission (Although I am the administrator in windows), what can I do?
Following steps are the steps that I went but I got an error:
Server properties >> security >> choose the option of SQL Server and Windows Authentication mode
and the error that I got is attached(access is denied)
Can you please help me?

You can change the setting after you gain admin rights to your SQL Server. You don't admin rights automatically, you have to explicitly add yourself during the install
Here's a guide on how to (re)gain those rights:
http://v-consult.be/2011/05/26/recover-sa-password-microsoft-sql-server-2008-r2/

How to burn a dvd with both Mac and Windows files

I have a DVD that has both Mac and Windows formatted files. When the DVD is mounted only Mac formatted files show. I want to burn a DVD copy containing both formatted files. How do I do that? Thanks in advance.

Correction! It is a CD and there are two partitions with Mac and Windows files.

Howto use on both macOSX and Windows XP?

Similar Messages

Maybe you are looking for