Howto use Service Discovery Gateway with multiple hops?

Hi,
does anybody know when mulitple hop support will be implemented in SDG?

Hi Brian, thank you for using our forum, my name is Luis I am part of the Small business Support community. What happen when you try to reach one of these web sites? Did you create ACL in order to gain access to these Web sites? In this case I think that will help you in order to gain access to them.
I hope you find this answer useful
Greetings,
Luis Arias.
Cisco Network Support Engineer.

Similar Messages

New to Apple products (finally) - can I use my Itunes account with multiple products e.g. Iphone and Ipad?

New to Apple products (finally) - can I use my Itunes account with multiple products e.g. Iphone and Ipad?

Oh yes! Apple will be happy for you to buy as many Apple products as you can afford.
As and when needed, each can be given its own selections of content to sync with.
tt2

HT1539 How can a digital copy be used in a household with multiple apple ids, synced on the same computer?

How can a digital copy be used in a household with multiple apple ids, synced on the same computer? I want to put a digital copy on my device, and on my wife's device.
Please help.

you're welcome.
actually, unless you take an extra step, the first opened swf will close. if you want the 2nd to close, the initial receiving lc will send a message to sender that causes the sender to close.

I would like to use one library but with multiple ipods, but because they are my kids Ipods, and they each have their own gift cards, I'd like to be able to add money to their "profiles" without them having their own account - what is the best way

So here is my delima - I want one Ipod account - because I only want one library - since we all like the same music - but my kids, who have their own IPODS, have gift cards, who want to be able to keep track of their balance without the other child affecting the balance - meaning - each gift card should be seperate and not totalled to the single account - Beacuse the library is fairly large, having three libraries of large amounts would be a waste. I would also like to restrict their purchased to the gift cards only and not my credit card on file. Does this make sense? Once this is resolved, I'm assuming they would use their own playlists to copy their favorites to each Ipod. Or would I set up an account for each child - which I dont want to do, because I dont want them having access to my Credit Card, and only gift card balances. With multiple accounts, I'm assuming that would also build seperate libraries? We also have multiple computers, but I share the library to those computers -
What is the best way? I'd like to be able to add credit to a specific child (birthdays, etc) without the other child being able to access that credit. For simplicity sake.
We are new to IPODS and lack any MAC skills.
Thoughts?

Not going to happen the way you want it to.
When you add a gift card balance to the Apple ID, it's available for the Apple ID.
Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

Using the same library with multiple computers over a network Use Aperture

Hi Everyone. I am researching some cataloguing/editing programs to recommend one to my boss, and I was wondering if it was possible to use the same library between multiple computers on a network. Does anyone know if this is possible? This may be what makes or breaks the decision on whether or not to go with Aperture as we need a program that can access a large database of photos on multiple computers.
Thank you.

Welcome to the forum.
You can do it, but...
It's not supported by Apple.
Performance won't be great unless you're running a really fast network.
If more than one person tries to access the Library at one time you're likely to end up with a corrupted database, and there's no code in Aperture to limit access to one person at a time.
The Library must be stored on an HFS+ volume - don't even try putting it on a FAT32-formatted drive.
If you want 'proper' multi-concurrent-user network-enabled cataloguing software you're looking into a whole different level of investment than the low price of Aperture - think more in terms of thousands or even tens of thousands of dollars.
Ian

Using single SMB share with multiple Hyper-V clusters

Hello,
I'm trying to find out if I can use a single SMB share with multiple Hyper-V Clusters. Looking at:
How to Assign SMB 3.0 File Shares to Hyper-V Hosts and Clusters in VMM
I think it's possible. Since the File Server is going to handle the file locking it shouldn't be a problem.
Has anyone tried that?
Thank you in advance!

Hello,
I'm not sure that's possible, I get this from this statement:"Assign the share—Assign
the share to a virtual machine host or cluster."
Even if it worked I wouldn't do that. Why don't you just create multiple shares?

XML gateway with multiple XML structures??

Hi,
I have a requirement to import data using XML gateway with different XML structures. Third party system sometimes will not provide certain tags itself if there is no data for the tag like contacts in below sample xmls. In that case we need to ignore those tags (CONTACTS in below sample). As per my understanding, we must have tag in XML though it may not have any value.
We have 2 XMLs
XML1 for supplier with contacts
<SUPPLIER>
<NAMES>
<NAME1>XYZ </NAME1>
<NAME2>ABC</NAME2>
</NAMES>
<SITE>
<SITE1>XYZ </SITE1>
<SITE2>ABC</SITE2>
</SITE>
<CONTACT>
<CONTACT1>XYZ </CONTACT1>
<CONTACT2>ABC</CONTACT2>
</CONTACT>
</SUPPLIER>
XML2 for supplier without contacts
XML1
<SUPPLIER>
<NAMES>
<NAME1>XYZ1 </NAME1>
<NAME2>ABC1</NAME2>
</NAMES>
<SITE>
<SITE1>XYZ1 </SITE1>
<SITE2>ABC1</SITE2>
</SITE>
</SUPPLIER>
Can we upload data in both these xmls using only one generic dtd and xgm using XML gateway which will skip any missing tag.
Thanks
Rishi

Hi, you can FOR XML PATH for a finer degree of control over your XML. Use the @ symbol to create attributes. Here's a simple example:
DECLARE @t TABLE ( rowId INT IDENTITY PRIMARY KEY, [address] VARCHAR(50), city VARCHAR(30), floor INT, suite INT, doorType VARCHAR(20) )
INSERT INTO @t VALUES
( '123 Fake St', 'Springfield', 10, 512, 'Metal' )
SELECT
[address] AS "Address",
city AS City,
[floor] AS "Location/@Floor",
suite AS "Location/@Suite",
doorType AS "Location/@DoorType"
FROM @t
FOR XML PATH ('Company'), ROOT ('Companies'), ELEMENTS;

Can we use same data definition with multiple concurrent programs?

Hi,
My requirement is as below:
I have two concurrent programs (say CP1 and CP2), both concurrent programs need to use same data definition (the same data template xml file) and same RTF layout template. However when registering data definition in the E-Biz, the data definition code must match concurrent program, hence I have to create two definitions (for the same data template xml file) and because layout template is attached with data definition I have to duplicate the layout definition also.
In summary, i have to create two (duplicate) Data Definition and Layout Template for the same dataTemplate.xml and Layout.rtf files. Is there any way to avoid this duplication?
The only issue with duplication is any change in xml or rtf needs to be updated in all the four definitions (2 data definitions and 2 layout definitions).
Thanks
Bhavik

I found the resolution and thought of sharing
you can see this post
*[How to use same data definition/template between multiple concurrent programs? |http://techatwork.wordpress.com/2009/08/06/how-to-use-same-data-definitiontemplate-between-multiple-concurrent-programs/]*
Thanks
Bhavik

Using BT Keyboard / Mouse with multiple computers

Hey everyone - happy holidays!
I have a quick question (or so i hope) regarding the use of a Apples Bluetooth keyboard and mouse. I have two computers a Mini and G5, I currently have 2 displays and would like the option to be able to switch my second display to my Mini.
This I can accomplish with a KVM switch, the drawback is I have the BT keyboard and mouse paired with my G5 - is there a method of pairing my interface with both machines but have the ability to switch from one system to the other?
Thanks for the help. Jim.
Mac OS X (10.4.3)

I do not believe it is possible to pair devices like mice and keyboards to multiple computers. Its a security risk hence the reason behind "pairing". There may be a software solution such as:
http://synergy2.sourceforge.net/
But I have not used it or looked much into it.

Using OPM in tandem with multiple data sources

We are working on a scenario where rules built in OPM need to run validations on data received from multiple applications (legacy applications and Java / .Net based applications), and the rule output is to be presented to another system. From what I read on OPA, the Oracle Determinations Server should be able to support such a scenario. Is my understanding correct? Please also advise on relevant material I could refer to within OTN for help on such a configuration.
Thanks,
Srinath

user11101031 wrote:
We are working on a scenario where rules built in OPM need to run validations on data received from multiple applications (legacy applications and Java / .Net based applications), and the rule output is to be presented to another system. From what I read on OPA, the Oracle Determinations Server should be able to support such a scenario. Is my understanding correct? Please also advise on relevant material I could refer to within OTN for help on such a configuration.
Thanks,
SrinathSrinath,
It does sound like you want to use the Determinations Server for this sort of thing. The Determinations Server is a SOAP/XML webservice, so you can call it from both Java and .NET applications. Its a stateless service and works on the principle that you send information and requests for answers, and it returns those answers in the response.
There are some tutorials that will help you integrate the determinations server with Java and .NET applications on OTN (Oracle Policy Automation on OTN > Tutorials).
Also there is more general help documentation on using OPA.
http://www.oracle.com/technology/products/applications/policy-automation/index.html

Issue with Safari and using the back arrow with multiple tabs open

I open multiple tabs in Safari but when I'm in a tab browsing and I hit the back arrow, in the new version of Safari, it doesn't just go back to the previous page in the tab, it completely backs out of all the tabs. What am I doing wrong?
I have a PC running Win 7 and the lastest version of Safari. I launch Safari which opens to my home page (CNN). I then go the News on my menu bar and select Open in Tabs - then tabs for 6 news sites open up. However if I go to one of the tabs and start navigating around the sight and I want to back up a page I click the back arrow like I have always done in previous versions of Safari but instead of backing up 1 page in the tab I'm in, it collapses all the tabs and I'm back with only the CNN tab still open. Its frustrating not being able to backup on page and I can figure out what's going on. I've use Safari for sometime now but only this version is giving me this problem. I tried resetting and reinstalling Safari but still get the same problem. Any ideas? Its like I'm backing out of tabs instead of pages.
Jeff Law
< Edited By Host >

Thanks for your quick response.
1) I have the Block Pop UP windows option turned off
2) I switched Safari to 32 -bit mode and rebooted my iMac but I still can't get the CBS videos to run
The exact message I get in the Hulu or CBS box is:
The video you have requested is either unavailable or is being blocked by an ad blocker installed in your browser.
I have the same problem with the Safari, Firefox and Opera (all are the latest versions.
------Barry N.

How to create Using Formatted Text Field with multiple Sliders?

Hi i found the Java Sun tutorial at http://java.sun.com/docs/books/tutorial/uiswing/components/slider.html very useful, and it tells how to create one Formatted Text Field with a Slider - however i need to create Formatted Text Field for multiple Sliders in one GUI, how do i do this?
my code now is as follows, and the way it is now is scroll first slider is okay but scrolling second slider also changes value of text field of first slider! homework due tomorrow, please kindly help!
// constructor
label1 = new JLabel( "Individuals" );
scroller1 = new JSlider( SwingConstants.HORIZONTAL,     0, 100, 10 );
scroller1.setMajorTickSpacing( 10 );
scroller1.setMinorTickSpacing( 1 );
scroller1.setPaintTicks( true );
scroller1.setPaintLabels( true );
scroller1.addChangeListener(this);
java.text.NumberFormat numberFormat = java.text.NumberFormat.getIntegerInstance();
NumberFormatter formatter = new NumberFormatter(numberFormat);
        formatter.setMinimum(new Integer(0));
        formatter.setMaximum(new Integer(100));
textField1 = new JFormattedTextField(formatter);
textField1.setValue(new Integer(10)); //FPS_INIT
textField1.setColumns(1); //get some space
textField1.addPropertyChangeListener(this);
//React when the user presses Enter.
textField1.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0), "check");
        textField1.getActionMap().put("check", new AbstractAction() {
            public void actionPerformed(ActionEvent e) {
                if (!textField1.isEditValid()) { //The text is invalid.
                    Toolkit.getDefaultToolkit().beep();
                    textField1.selectAll();
                } else try {                    //The text is valid,
                    textField1.commitEdit();     //so use it.
                } catch (java.text.ParseException exc) { }
label2 = new JLabel( "Precision" );
scroller2 = new JSlider( SwingConstants.HORIZONTAL, 0, 100, 8 );
scroller2.setMajorTickSpacing( 10 );
scroller2.setMinorTickSpacing( 1 );
scroller2.setPaintTicks( true );
scroller2.setPaintLabels( true );
scroller2.addChangeListener(this);
textField2 = new JFormattedTextField(formatter);
textField2.setValue(new Integer(10)); //FPS_INIT
textField2.setColumns(1); //get some space
textField2.addPropertyChangeListener(this);
//React when the user presses Enter.
textField2.getInputMap().put(KeyStroke.getKeyStroke(KeyEvent.VK_ENTER, 0), "check");
        textField2.getActionMap().put("check", new AbstractAction() {
            public void actionPerformed(ActionEvent e) {
                if (!textField2.isEditValid()) { //The text is invalid.
                    Toolkit.getDefaultToolkit().beep();
                    textField2.selectAll();
                } else try {                    //The text is valid,
                    textField2.commitEdit();     //so use it.
                } catch (java.text.ParseException exc) { }
// State Changed
     public void stateChanged(ChangeEvent e) {
         JSlider source = (JSlider)e.getSource();
         int fps = (int)source.getValue();
         if (!source.getValueIsAdjusting()) { //done adjusting
              if(source==scroller1)   {
                   System.out.println("source ==scoller1\n");
                   textField1.setValue(new Integer(fps)); //update ftf value
              else if(source==scroller2)     {
                   System.out.println("source ==scoller2\n");
                   textField2.setValue(new Integer(fps)); //update ftf value
         } else { //value is adjusting; just set the text
             if(source==scroller1)     textField1.setText(String.valueOf(fps));
             else if(source==scroller2)     textField2.setText(String.valueOf(fps));
// Property Change
    public void propertyChange(PropertyChangeEvent e) {
        if ("value".equals(e.getPropertyName())) {
            Number value = (Number)e.getNewValue();
            if (scroller1 != null && value != null) {
                scroller1.setValue(value.intValue());
             else if (scroller2 != null && value != null) {
                scroller2.setValue(value.intValue());
    // ACTION PERFORMED
    public void actionPerformed(ActionEvent event) {
    if (!textField1.isEditValid()) { //The text is invalid.
        Toolkit.getDefaultToolkit().beep();
        textField1.selectAll();
    } else try {                    //The text is valid,
        textField1.commitEdit();     //so use it.
    } catch (java.text.ParseException exc) { }
         if (!textField2.isEditValid()) { //The text is invalid.
        Toolkit.getDefaultToolkit().beep();
        textField2.selectAll();
    } else try {                    //The text is valid,
        textField2.commitEdit();     //so use it.
    } catch (java.text.ParseException exc) { }
...

if :p3_note_id is null
then
insert into notes (project_id, note, notes_month, notes_year) So, p3_note_id is NULL.
Another option is that you have a trigger on table NOTES that generates a new note_id even for an update.

Using an audio interface with multiple inputs

Hi,
I'm currently facing an issue where I need to be able to use the audio from a microphone and a keyboard through Skype calling. I have them both plugged in to a Focusrite Saffire Pro 24 audio interface. The problem is that only the microphone plugged into input 1 seems to be coming through, as if Skype will only address one channel of the interface. Is there any way around this or a different method you have used in a similar situation?
Thanks,

I stumbled upon this thread in searching for some deeply hidden feature in Skype, but alas, there may not be a fix within Skype. I realize the parent topic is very old, but I hope this can hope anyone in need of a solution (or get skype to incorporate some sort of summing feature).
That being said, there is an alternative for those of us with interfaces that have fully customizable routing. Fully customizable routing, and more than your standard two (stereo) outputs, and at least one more input than you need in total for microphones.
What we're going to have to do for our podcast (one member is on vacation, states away), is hook all microphones into inputs that are not input 1. As far as I can tell, Skype will only recognize input 1. In your interface's output routing software, you will need to create a submix/monitor mix (whatever they will call it) that sums (combines) all of the microphones together. While you have the ability to add the software/daw return to this mix, you typically will not want to, as it could create feedback for the person joining the conversation via skype.
After you have created this submix/monitor mix (and be sure to double/triple check that input 1 is not involved with this mix at all) you will assign this to an auxiliary output... so say, your interface has 4 outputs, assign it to output 3. Then lead a cable from the physical output 3 into the physical input 1 on your interface.
What this accomplishes is we're effectively sending all microphones into input 1, so your Skype recipient will be able to hear a mixdown of all microphones. Certain interfaces will also allow you to do this routing without cabling.
There are more things to keep in mind, like if you're recording the call, you'll want to run a parallel output from your Main DAW/Software return into another physical input, but again, quadruple-check that you are not monitoring that track into your main buss as it would create a horrible feedback loop. Generally I'd have the caller record their audio through Audacity or something free, but getting their recording on my end makes for syncing the call to the room recording so much easier... SO MUCH.
TL;DR
1) Make sure you have more than 2 outputs, and 1 more input than you would normally need for mic's.
2) Plug microphones into inputs 2 and on, saving input 1.
3) Use interface's software/routing mixer to sum all microphone inputs (EXCEPT 1) to an unused physical output.
4) Route or connect that output into Input 1.
0-5) For the love of all audio gods, make sure you are double checking to avoid feedback.
I also recognize that with the appearance of things like WavTap and Soundflower that there are other solutions -- but this is one option for those of us that do not wish to explore those options.

Using as ITS instance with multiple SAP systems

Hello,
Despite the recommendation of note 731679, I´m looking for some documentation or tips related to an ITS configuration to support two different SAP systems.
The note refers to "setting the relevant parameters in the service files or by using URL parameters" but I didn´t found a clear recipe.
Did someone there implement this scenario?
Thanks in advance,
Rodrigo

This works fine for a single host system (development) but when I try with a dual-host my new instance u201CBu201D reads the service files of instance u201CAu201D when I try to start an IAC. I gone through all the xml config files and canu2019t find anything wrong. I have instance B configured to use different ports then A. Separate IIS sites for each instance running on WIN2003.
How do the wGate know the correct Agate process to connect to?
Thanks,
Ron

Announcing the availability of enabling Windows Server 2012 R2 Essentials' integration of Microsoft online services in environments with multiple domain controllers

In Windows Server Essentials 2012 R2, all of our online services integration features, including Azure Active Directory and Office 365, are supported only in environments that
have a single domain controller. In environments with more than one domain controller, integration of these services is blocked due limitations in the user account and password synchronization mechanism in Windows Server Essentials.
I am happy to announce that with the recent Windows August Update released on (8/12/2014, PST), this limitation has been removed. This update adds support for both Azure
Active Directory integration and Office 365 integration features in domain environments consisting of a single domain controller, multiple domain controllers, or Windows Server Essentials as a domain member server.
For more information, please go to
http://support.microsoft.com/kb/2974308

Hi JoeBeck,
Thanks for the comment. Could you please tell which link you clicked to download?
Please go to PinPoint check details and start download
http://pinpoint.microsoft.com/en-US/applications/Dynamics-CRM-Online-Add-in-12884966386
Thanks,
Shanghai Wicresoft

Howto use Service Discovery Gateway with multiple hops?

Similar Messages

Maybe you are looking for