Hoy can I include my thunderbolt display, in my Applecare Protection Plan, after registering my MacBook Pro?
Hoy can I include my thunderbolt display, in my Applecare Protection Plan, after registering my MacBook Pro?
Call apple, they will ask for the display serial number to add
Similar Messages
-
Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
I have 2 and cannot seem to get them to work?Can you use 2 Thunderbolt Displays with Windows 7/Bootcamp on a Early 2011 Macbook pro?
I have 2 and cannot seem to get them to work? -
I can't submit the registration form online for AppleCare Protection Plan for Macbook Pro.
When i reach the 3rd stage of registration, i can't seem to submit. After pressing the submit button, the page stays the same for the whole day. I can't press the button again. Also, when i refresh the page, the same problem occurs over and over again. What should i do?
I would call AppleCare directly and have them assist you. http://support.apple.com/kb/HE57
-
Can i use a thunderbolt display for my macbook pro and hp laptop with windows 7 and what adapters will i need
Hi jayhrab,
Currently, the system requirements listed for an Apple Thunderbolt Display are:
Thunderbolt-enabled Mac computer, including MacBook Air, MacBook Pro, Mac mini, and iMac
OS X v10.6.8 or later
Apple - Thunderbolt Display - Read the tech specs.
Regards,
- Brenden -
Can you marry a thunderbolt display to a early 2008 mac pro?
can you marry a thunderbolt display to an early 2008 mac pro?
You will need a DUAL-LINK DVI cable for that display.
<http://www.amazon.com/DVI-D-Male-Dual-Link-Cable/dp/B003QNDEGA>
Your video card is designed to run two 30" displays, but is getting old. Cards that age do fail due to bad capacitors, bad solder, of stuck fans. -
Can I run two thunderbolt display monitors off of my new 27" iMac?
Can I run two thunderbolt display monitors off of my new 27" iMac?
Yes, the new iMac has two Thunderbolt ports. Plus Thunderbolt can be daisy chained thru external Thunderbolt drives and displays that have multiple ports.
For more info, see > Apple - Thunderbolt: Next-generation high-speed I/O technology.
Although I'm not sure exactlly what Arrangement selections you will be offered in the Displays Preference, because I have not tested that setup myself... -
Can I use a thunderbolt display with dvi video card?
Can I use a thunderbolt display with dvi video card?
Nope, you can only use it with a Thunderbolt port.
-
Can I use my Thunderbolt Display with my PS3?
Hi there, I have recently purchased a Thunderbolt Display and I was wondering if I could use it with my PS3. I know I'll need a Mini DisplayPort to HDMI Adapter, but will I need anything else like a converter or can I plug it straight in?
ThanksA Mini DisplayPort to HDMI Adapter can connect a HDMI display to a Thunderbolt port. It does not work in the other direction. If the PS3 has no Thunderbolt port, you can't use a Thunderbolt display. There are no adapters or converters that can help.
-
after updating my Macbook Pro retina display to os x yosemite 10.10.2, the mause and track pad locks, and do not respond especially when using the Mac for a long period, please help, how can I solve this, I do not like feel like in windows, so I paid good money for this mack, I feel calm
Hi Buterem,
I'm sorry to hear you are having issues with your MacBook Pro since your recent Yosemite update. I also apologize, I'm a bit unclear on the exact nature of the issue you are describing. If you are having intermittent but persistent responsiveness issues with your mouse or trackpad, you may want to try using Activity Monitor to see if these incidents correspond to occupied system resources, especially system memory or CPU. You may find the following article helpful:
How to use Activity Monitor - Apple Support
If the entire system hangs or locks up (for example, if the system clock freezes and stops counting up), you may also be experiencing some variety of Kernel Panic. If that is the case, you may also find this article useful:
OS X: When your computer spontaneously restarts or displays "Your computer restarted because of a problem." - Apple Support
Regards,
- Brenden -
hi !
Can I include a ClickOnce deployment and rest Registry ActiveX dll to register (program created by c #)?
Please answer.hi !
Can I include a ClickOnce deployment and rest Registry ActiveX dll to register (program created by c #)?
Please answer.
Hello,
We could not registry activex dll with clickonce directly, but here is a workaround below.
1. Create Package for that activex dll to registry it to com.
2. Package that MSI to CAB file.
#1,#2 for detailed steps, please refer to the following blog.
How to develop and deploy ActiveX control in C#
3.
Deploying CAB Files Using ClickOnce Deployment
Regards,
Carl
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
ciao vorrei sapere se il monitor led thunderbolt display 27 esiste qualche modo per collegarlo con il mac pro 2012?
no, it will not work look here
https://discussions.apple.com/thread/6118192?tstart=0 -
HT201177 no audio when using a mini display port to HDMI cable to TV on my Macbook pro
no audio when using a mini display port to HDMI cable to TV on my Macbook pro. can only see the video
I keep saying this over and over, in the hope that people who do a search will find it. Apple cannot possibly test for or be reponsible for the bazillion combinations of adapter, cables, and TV's out there. The only monitors that are 100% guaranteed to work with the MacBook Pro are the Cinema Displays and Thunderbolt Displays, because, they're made by Apple. They're expensive, but they work perfectly.
My guess is that you bought a cheap MDP to HDMI cable, or have a defective one. From my reading of these boards over the past few months, cheap cables have a high failure rate. And the regular priced ones have only a slightly less of one. Try a new one. Make sure you do not damage the Thunderbolt port. -
Please see question above, but also note, I have the Applecare Protection Plan but am unable to get through to anyone on a weekend and I desperately need to use my laptop this weekend. I can't log in at all now as I've forgotten my admin password. A few weeks ago I also changed the password on my husband's new MacBook Pro and again forgot the password. I spoke to someone at Apple and they helped me to reset it within minutes, by restarting the computer holding Command+something else (I can't remember what it was). A black screen with writing came up and I had to type in something like "password" (not sure exactly). Anyway, this was a very quick and efficient process but I didn't write it down unfortunately. Does anyone out there know what to do? Thanks in anticipation
Forgot Your Account Password
For Lion/Mountain Lion
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see Reset a Mac OS X 10.7 Lion Password and
OS X Lion- Apple ID can be used to reset your user account password. -
Where can I buy a genuine apple replacement battery (A1309) for my Mid 2010 17" Macbook Pro?
Where can I buy a genuine apple replacement battery (A1309) for my Mid 2010 17" Macbook Pro? There are used batteries on ebay that don't appear genuine. There are some third-party knock offs. The apple store seems to believe they can replace it, but I have to make a reservation at the silly Genius Bar just to have them tell me how much it's gonna cost, not to mention then likely wait for them to order the battery and install it. I'm perfectly capable of installing it myself. I just need to know where I can order it?
Thanks,
AndrewYeah, that's what I've finally decided. I was kidna super frustrated because the first apple store I called wouldn't even tell me a price or tell me if they could replace the battery without a Genius Bar appointment, and as I would have to take off work and drive acros town--and I don't have a car so I'd have to borrow one--that was pretty annoying. That call left me pricing linux laptops. I called another store to see if I'd have better luck, and the initial answer was the same, but the girl relented under some trying-to-be-nice-but-clearly-annoyed pressure, and she gave me the answers I needed: yes, they should have the battery in stock and it should be a same-day replacement that should cost $179.
It just *****, really, because there's so much about Apple that I used to love, and I'm watching it kinda melt away under their success in the mobile market. As a professional user, there's less and less reason to stick with them. Instead of being the best they can be, I feel like they're just trying to be flashier and just a little better than the other mediocre computer companies. Ugh. Anyway, now I'm ranting.
<Edited By Host> -
After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".
Can you browse the Time Machine drive from Finder?
If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background'
Maybe you are looking for
-
I have done this multiple times in the past (I have several files - not folders - that contain mail). However due to the fact that II was somewhat brain damaged several years ago I can no longer remember (or figure out) how to do it. For instance, I
-
Hi Andy -- I implemented the form with the region source of css scripts. After populating default data for one item, I tried to print the form using printer-friendly mode, the data appeared on the top of the form, it is no longer displayed within the
-
Consistent vertical space between elements in page layout--Pages 09
Hello, Is there a way to maintain a consistent amount of vertical distance between elements in the Pages 09 layout view? Thanks, ~A
-
I have a word document that I have converted to HTML. The only problem is that it is a 20 page word document and hakes a large HTML doc. Is there any way I can convert this to a HTML document with page indexing at the bottom of each page and a back a
-
How row migration get eliminated by export and import the table.
Hi , Please let me know,how row migration get eliminated by export and import the table. Another method,deleting migrated rows and inserting those rows from copied table, i think the concept behind this method is,inserting these rows into new block.