Hp 1000 j110 deskjet installed worked fine tried to install hp laser jet 1000 none work xp pro
hp 1000 j110 deskjet installed worked fine tried to install hp laser jet 1000 now none work win xp pro
any ideas printer port probs???
Thanks
John
Hello jpihl1
The product you have is a commercial printer. I suggest posting in the forum for HP Business Support for a better chance at finding a solution.
You may find the Commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413Hello jpihl1
Don't forgot to say thanks by giving "Kudos" to those that help solve your problems.
When a solution is found please mark the post that solves your issue.
Similar Messages
-
I use a two button mouse with my Mac Book Pro. It works fine, but after installing Lion, the mouse wheel goes in reverse of what it did (rolling the wheel towards your palm goes up not down the page). Anyone know how to fix this?
First sentence in OPs question:
I use a two button mouse with my Mac Book Pro
I guess the track pad settings would look similar to my screen shot?
Regards,
Colin R. -
my ipad mini was working fine until i installed this last update, now it wants me to reset it and it want let me , What do I need to do?
Try resetting the phone:
Press the Sleep/Wake button & Home button at the same time, keep pressing until you see the Apple logo, then release. -
Dear Sirs,
How can I stop Firefox from incessantly interrupting my work by trying to install an update that is incompatible with the Google toolbar which I depend on. Not knowing any better, I trustingly allowed the installation the first time the update notice appeared. It crippled my Internet routines. The toolbars did not work and the bookmarks as well as all the history entries were lost, I have had to reinstall my previous Firefox 4.0.1 and start all over again.Hi chib60,
Sorry you are having so much trouble.
Dealing with your last comment first ''"Copy and paste the information from Help > Troubleshooting Information." Why? How? This is ridiculous info - it has no logic or sense to it like most of your advice. ''
If you look to the right you will see a link for 'more system details' that is where such troubleshooting information appears, and it can sometime be helpful.
I am using firefox on a couple of old XPs without problems. Obviously crashing is not expected behaviour, but please try to think of firefox as two separate parts the basic browser and all the additional software as addons and plugins.
It may be rather unrewarding trying to track down the cause of a crash using crash information, the best way forward is probably to start using it in[[safe mode]] and with no plugins installed.
* see also [[basic troubleshooting]]
If firefox is recommended by your university, why not try it out on one of their computers, presumably it is installed on the university computers available in the library etc, that should at least convince you that it does work.
I hope the problem is not malware, but if it is all the personal computers you try, a possibility that can not be discounted is that it is some form of malware affecting those computers.
Have you tried Internet Explorer, that will be installed on your XP by default I imagine, does that work ? -
I have car charging problems,my 4s won't charge with tomtom car kit,my old 3GS worked fine,tried a belkin charger had same problem.
Any ideas I'm pulling my hair out !!!Seems to be a hardware issue and you'll have to get it checked by visiting an Authorized Apple Service Provider, an Apple Store , to see if other 3rd party charger will work at their place.
iPhone - Contact Support - Apple Support -
I have an Epson scanner that is apparently no longer supported because it is a PowerPC app. It's a very good scanner that worked fine until I upgraded to OS Mountain Lion on my MacBook Pro. Any suggestions on how I can continue to use it?
For that model, Epson has this information:
ICA Scanner Driver
07/17/12
Description: The latest Mac OS X ICA scanner driver for your Epson product is available only via Apple's Software Update. Here's how to get it:
1. Connect the all-in-one or scanner to your Mac and power it on.
2. Select the menu, then Software Update.
3. Follow the on-screen instructions to install the available updates.
Note: Software Updates may find multiple updates for your system. You may choose to install all or some of the updates by clicking on Show Details.
Compatible Systems: Mac OS X (v10.8.x) -
The iBooks dictionary works fine for my iPhone 5, but it does not work for my iPad 2. Is this fixable?
I went to the Audio store to see about getting a surround sound and the salesperson asked me why I wasn't using AirPlay, he said it was better than the Bluetooth, better quality. So I do have AirPlay on my Sony and I installed the app on my iPhone 5 but they can't find eachother.......when I try looking for my iPhone on my receiver it does not show it. The Sony display works through my TV, the set up screen is there but it says no devices found. Like I said, the Bluetooth finds the iPhone and works ok, but the AirPlay does not.....looking at the manuel it says that the AirPlay will recognize my device (iPhone 5) but it does not..........
-
y Time Capsule is working fine with ethernet connection, but it is no longer working with wifi, probably because of my wrong setting; is there a way to reset wifi setting without losing backuped data? Thanks you all
Giancarlo Messalli wrote:
1) are you sure a reset holding the reset button will not delete my data?
Absolutely sure.. There is no connection at all.. reset is only the router side of the TC.
For the hard disk to be erased you need to access the airport utility disk page.. request erase and confirm the operation.
2) I can access to time capsule by ethernet but I am not able to input the corret setting by myself
Thank you again
I am uncertain why if you have access you cannot change settings.. but that is why you reset things so any of those problems should be fixed.
Here is the Apple info on reset.
http://support.apple.com/kb/ht3728
And here is the quote from the horse's mouth so to speak.
Factory default reset: Perform this reset if you wish to repurpose the AirPort Base Station or Time Capsule and want to remove all personal profiles and settings first. This reset resets the device to its state when you first purchased it. Data stored on internal or external hard drives connected to the device will not be erased. If you choose, you may manually erase the hard drive using AirPort Utility. -
my ipod classic got wet back in August.. it seemed to work fine for about a month, but recently is not working at all..screen appeared to get cloudy and then it just stopped working. thanks.
Most likely, water damage.
You can try putting your iPod in a tupperware, half filled (maybe half inch) with rice grains, close the cover for about a week.
If you have done this, as soon as it got wet, higher chances of success, now looks like the water moisture is getting to the LCD screen.
Then you can always bring it to Apple Genius bar, for a an overhaul. (may cost you half the price of a new iPod classic.) -
I have a VGA adapter and an iPad2. Tried projecting my iPad2 to projector using the VGA but doesn't work. Tried it with friend's iPad1 and it works. Why?? Pls help.
Yup - nothing happens. I then took the same VGA cable and plugged it into my friend's iPad1 and it worked perfectly when she opened Keynote. My understanding is that the iPad2 mirrors the entire screen, so no need to go into any specific application in order to project to the screen, right? Do I need to download any specific app or change any settings in order to be able to project the screen using VGA?
Sorry - novice at this. Not very tech minded either... -
Iphone stopped syncing photos with Face Book. I've tried all the set up directions but none work, or don't follow what is said they will follow (no directions pop up when I select syned from iphone in pictures)
Thanks! I called Apple, and we did a software update. While the phone now will light up and work for about 30 seconds before going dark again, the representative said I would probably get a replacement phone if I took it in. You are right - probably a hardware failure!
-
HT4623 Getting the error message "Unable to Install Update" when trying to install IOS update
Getting the error message "Unable to Install Update" when trying to install IOS update
Restore teh device.
-
Gmail question. I'm getting an error message that states my username or password are incorrect. I haven't changed anything and the gmail is working fine on the mac book. The mail function worked yesterday on the iphone but not today - any solutions??
Try Restarting / rebooting your Mac before doing anything more drastic..
S. -
I can't get Droid Turbo bluetooth to work in my 2005 Prius. Droid Razr worked fine. It seems to pair OK, and everything works great immediatly after pairing. After stopping and restarting car there is a message saying it found bluetooth device, I can still place a call with the car system, but no sound or microphone connection to the car system. Android tech support just said, "yea, that happens." I have version 4.4.4. Any ideas?
Automata,
Oh no. Is never fun having issues with bluetooth. Did you have this issue with any of your previous devices? When this happens what steps do you take to get it working again?
LindseyT_VZW
Follow us on Twitter @VZWSupport -
OS Windows Vista Ultimate - HP Laser Jet 1000 - Firefox will not print out internet page etc...
That simple, find an page you want to print, hit the print button and zero zip zlich.
Works just fine with IE?????See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages
Maybe you are looking for
-
.CR2 Files not recognized by Photoshop, Bridge, or iPhoto
I am a photographer shooting in Raw with my Canon Rebel T1i. I used to Import the images into iPhoto for editing and organization. But a few moths ago while importing the images (usually shows a preview of the photos) It just showed black... Then whe
-
How to write select query for this
Hi, I had a html form and in the for i had drop down box and it needs to select multiple values from the drop down box. When i select multiple values then i have to write the SQL select statement query . When i try to write the select statement and
-
Using Calculated Field in Multi Value Field
In Siebel Application Sales Order---> List There is a field call "Sales Rep" which displays an "USERID" of Order Sales Team Mvg Applet. But We want to display the Last Name and First Name (combined).We got the first and last name using calculated fie
-
Hi , How can i upload the image in product catalog in CRM2007. In product catalog - Product varient-Product- Document tab Import option is disable how to enable it. Please Suggest. Thanks & Regards Apoorva Asthana
-
Replenishment of the raw material
Hi All, This is REM scenario.normally the raw materials are reserved against prod order for production. but now client required for some raw material should be replenished after the stock get empty without the reference of the bom explosion and the r