HP 1018 replacement input tray/cover!!!!

Anyone know where i can purchase a replacement input tray for my HP 1018 LaserJet printer, the two ends that hold the tray in, have snapped and its effecting my printing, i am having to manually insert the paper into printer.
please bear in mind that i am from the uk, so any ideas would ideally have to come from there!!!!!

Hello StudioCity,
Welcome to the HP Support Forums!
Contacting HP's Technical Support to see about further options would be the best bet. If the part is available, you would able to order from them or check prices for a product replacement. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Similar Messages

H470: Broken "Input tray" (Paper Tray) -- Replacement part ideas?

My HP Officejet H470 Mobile Printer's "input tray" (or paper tray, lid, or closing lid) is broken. One of the 2 little "pegs" that work as its hinge have broken off. (Thanks, fabulous pet dog.) The part number, I believe, is CB028-67002.
Until I find a replacement, I must now manually feed-in paper.
I found an after market part online: The plastic lid for $140! A used H470 on ebay now is $125. I believe I've found a "refurbished" for $60. I will send a question direct to HP, but not feeling hopeful.
Ideas, anyone? If I should junk this printer -- which should be its replacement? Thanks!

Hello StudioCity,
Welcome to the HP Support Forums!
Contacting HP's Technical Support to see about further options would be the best bet. If the part is available, you would able to order from them or check prices for a product replacement. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here.
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP officeJet all in one 6310 paper feed issues at input tray

what could be the cause of my HP officejet 6310 printer intermitantly grabbing multiple pieces of paper at the input tray?
I have been using the same paper for over a year or 2 with no issues up to the last few months. I have blown out any dust and tried to clean the rollers with alcohol to no avail. Is it a part worn or did I not clean the right part?
It seems to happen more often with less sheets in tray. any help would be appreciated.

Hi,
Here is a link to a document that covers paper feed issues on the OJ 6310. There's a video which shows some steps about what to do. Even though you have cleaned rollers the video may contain more information about cleaning other rollers that you may not have cleaned.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02036357&tmp_task=solveCategory&lc=en&dlc=en&cc...
I hope that this helps solve your issue.
---- If my answer was helpful please click the Kudos star.
If your problem is solved please click the Accept as Solution button so other forum users can use the solution.---->
(I am an HP employee) I am not a expert on all our products, but I'll do my best to help you.

P1102w input tray doesnt seem to work

I have two laptops that connect to my home network which my HP P1102w is also connected on. The laptops both run Windows 7. If I try to prin t anything now, the paper does not seem to be taken in via the input tray. It sounds like its trying to suck in the paper but it doesnt actually do it. However, if I load paper in the priority feed slot, it prints out just fine. This occurs no matter which laptop I am printing from.

Hi Rhondafromrockville,
Welcome to the Support Communities!
The first step would be to check the sound settings in your System Preferences on the iMac. Click on the link below to see the screenshot in the section "Change your sounds." If you click on the Input tab, you should see the Internal microphone (Built-in). If it is not already selected, click on it and you should be able adjust your input volume.
Mac Basics: Set your preferences
http://support.apple.com/kb/ht2490
Once you confirm that the internal microphone is working on your iMac, then you can open Garageband, and check the settings to make sure the internal microphone is selected as the input source:
GarageBand '11: Record sound from a microphone
http://support.apple.com/kb/PH1893
GarageBand '11 - Record your voice
http://support.apple.com/kb/VI200
Cheers,
- Judy

Looking for OfficeJet 8600 pro plus replacement paper trays

Where can I purchase replacement paper trays for the OfficeJet 8600 Pro Plus printer?
I am NOT looking for the add-on paper tray unit, but a replacement for the primary tray. We shuffle various types of paper and envelopes in and out of the tray throughout the day, and we would instead like to keep several extra trays loaded with specialty paper to reduce wear on the primary tray.
Suggestiosn?
Thanks!
This question was solved.
View Solution.

I searched in the online stores available by HP and was unable to find this part. However, I was able to find that the part is available through HP Tech Support by calling in.
Click here to access the full list of HP Tech Support contact numbers.
The part number is CM749-60036 for the main tray assembly for the Officejet Pro 8600 Plus. This part is, currently, around $25 usd, but prices are subject to change.
Hope this helps.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Paper from different input trays

Hi,
Is it possible to have a document that prints the first page on paper in input tray 1 and the rest on paper from input tray 2 ?
I've looked into the PrintedOutputOptionsSpec object, but there's nothing about input trays there ...
Kind regards,
Yves Vindevogel

IF you know about the device bring printed to, and what to look for in the PDF, you could write a custom plugin that would send the necessary commands to the device. Many people have done just that over the years...

Replacement Input Device for Car Kit CK-15W

Hi,
Can anybody tell me where or how i can obtain a replacement
Input Device for Car Kit CK-15W - ( i've lost the one that came with the unit )
Regards
Johnny

you will have to contact a Nokia service center near you for parts.
Danny b
Nokia Accredited Installer
If my answers help you, give me a Kudos. Its like a pat on the back.

Printer Trays - How to control input trays

I have hit a wall and need your help. We have an application compiled for both a Lexmark Optra S 1650 and an HP4 Plus. The input tray to be used is dependent upon the printer selected. We are using JfDesign 5.5.
For the Lexmark, we need to select label stock from the tray physically labeled as "3". In the .ICS, this drawer is considered as tray "5" or "1005". Each attempt pulls from drawer one, compile option "Use printer tray numbers" unchecked. Attempts, ^job statement with: (1) -ati3; (2) -ati5 -atjoff; (3) compiling with non-portable tray #3; (4) compiling with non-portable tray #5 and use printer tray numbers checked.
Ideas?

I had a problem that was somewhat similar. We are using two printers that are definately different. Our print jobs can go to either one, interchangeably. We needed to be able to specify within Output Designer the specific tray that a particular page was to draw from and have the correct paper be used no matter which printer was printing the job. To complicate matters, Output Designer did not have ICS files for our specific printer models.
One printer has 6 input sources and the other 5. Which specific input tray contains a particular type of paper is different. More importantly, the PCL emulation in both of them require a different number in the PCL tray selection command to get the printer to draw from a specific tray. For example, for one printer (it happens to be a Lexmark 3455) the tray selection command for "label stock" uses a 1 in the command sequence (that happens to be tray one due to the paper path being the best for labels); the other printer (a Xerox DP65) requires a 6 in the command sequence to be able to draw from the tray that is defined as containing label stock (again that happensto be tray 6 which has a staight paper path - so as to reduce the chance of the labels peeling off while going around sharp curves).
After doing considerable study of the ICS files, I had to do two things: (1) Determine the PCL tray selection command number for each tray for each printer, and (2) through trial & error determine what value to use within the ICS file to produce the description that I wanted to see in the Format/Page/InputTray selection drop down list.
Once I had all that information figured out, it was simply a matter of changing the "Trays", "InputTray", and "DefaultTray" parameters within the ICS file. The important part is to know the "format" of the InputTray parameter. The first number is what produces the description for the InputTray selection drop down list. The second number is what is used for the tray selection command.
To determine the values I wanted for the description, I just started changing the numbers and checking to see what each different value resulted in. The number for the tray selection command came from the printers themselves - the Lexmark will print the command numbers on its setup page while the Xerox provides it via the keyboard & CRT menus.
When compiling forms we do not check the "Use printer tray numbers" box. When printing we don't use any tray control parameter (-ati, -atj) on the ^job statement. A print job might consist of a colored separator page, a letterhead page and several plain white pages. There is nothing within the DAT file to control the input tray; that was all defined within Output Designer.
We did discover a couple of quirks that we were able to resolve. First, if I set up Output Designer so that the Xerox printer is the "default" (and it is the one most often used) the tray selection wouldn't work properly; the solution turned out to be to set up Output Designer to use the Lexmark as the "default"; we just use the -z and -asp parameters on the ^job statement to specify the desired printer and driver. The second one occurred when I decided to make the MDF files smaller by deselecting fonts that we don't use. When I did this the tray selection stopped working. Through trial & error the solution turned out to be to select a specific font for one of the printers even though we don't use that font.
To demonstrate what I'm talking about, here is the section of the ICS files that I'm referring to.
LEXMARK.ICS
>; Auxilliary Paper control information
>Trays 5 ; 5 paper tray selections on printer
>; JetForm-Printer
>.
InputTray 7 0 ; Auto Select
InputTray 20 20 ; High Capacity
InputTray 201 1 ; Tray 1
InputTray 2 4 ; Tray 2
InputTray 3 5 ; Tray 3
InputTray 405 1 ; Label Stock
InputTray 8 2 ; Manual Feed
>DefaultTray 20 ; On a new form default to High Capacity
XEROX.ICS
>; Auxilliary Paper control information
>Trays 6 ; 6 paper tray selections on printer
; DP65 PCL Designations:
; 0=Auto Select
; 1=Standard
; 2=Manual paper
; 3=Manual Envelope
; 4=Lower
; 5=Large Capacity
; 6=Envelope
>; JetForm-Printer
>.
InputTray 7 0 ; Auto Select
InputTray 20 1 ; High Capacity
InputTray 201 2 ; Tray 1
InputTray 2 3 ; Tray 2
InputTray 3 4 ; Tray 3
InputTray 405 6 ; Label Stock
InputTray 8 5 ; Manual Feed
>DefaultTray 20 ; On a new form default to High Capacity
(the period/space in front of the first InputTray parameter isn't really there; it is a quirk of the posting system)

HT1665 replacement sim tray

Hello I am just curious of how I would get a replacement sim tray fro my Space Grey iPhone 5s. I am new to these sim trays and was not told how to remove them. so I stupidly used a paper clip to do so and the tray now has a few scratches. I was wondering is there a way to order and get a replacement? Thank you so much!

Agh, I am so stupid I tried to mark your post as the one that solved my problem, but it wouldn't give me the option. I clicked on the one in my post that said your name.... Sorry.
Man I am having a super "off" day. Lol
K-D.

Looking for a replacement hard drive cover??

Hello everyone, this is my introduction as well. I just acquired an x301 from a good friend who cracked the hard drive cover/door/whatever you call it. I've been searching online in vain and was wondering if anyone here knew where I could get a replacement part? Hopefully I find one because I don't really want to rig something up just to keep it closed and black duct tape would be soooo tacky haha. Many thanks in advance!
- Lay

http://www-307.ibm.com/pc/support/site.wss/MIGR-70395.html
if you look at the hardware manual it should say the Part number for the cover.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Replacing ribbon cable cover flap on HP OfficeJet Pro 8600 Plus

On the above printer I was trying to close the lcd flap and somehow knocked off another little flap thing underneath which i didn't even know was there. I'm guessing it's a flap that comes out to protect the ribbon cable underneath, but I cannot figure out how to replace in in such a way that it stays folded out while the screen is lifted up. Thanks for any info.
BH

Hi Bluehorseshoe68,
Welcome to the HP Forums!
I have read your post on a program ribbon on your Officejet Pro 8600 Plus, and I would be happy to assist you!
Because one of the parts on your printer has physically broken off, I would first recommend speaking to our technical support for replacement/ repair options. They can be reached at 1-800-474-6836. If you live outside the US/Canada Region please click the link below to get the support number for your region.
http://www.hp.com/cgi-bin/hpsupport/index.pl
You can also try to reach HP Parts Direct to see if they have the cover you need for your front panel. Their phone number is 1-800-227-8164. I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Where can I get a replacement output tray flap for an Officejet 4620

Because of how my work area is set up, I've bumped the little plastic flap on the extendable tray for printed pages on the 4620. (The little plastic pivot point on one side broke off.) I fabricated a workaround using a soldering iron and later a straight pin, but it's not working the way I'd like.
Is it possible to buy a replacement part for this model? If so, where and how.

Hello there, Welcome to the Forums! I hope you enjoy your experience
I read your post about your question about replacing a part that had broke. I would suggest calling into HP and inquiring with them to see if the part is available.
Here is their contact info:
If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
I hope this information helped you!
Have a great weekend
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

SAP Data Quality Management: how to replace input fields

Hi all,
the input fields in the SAP DQM 4.0 Real time job Job_Realtime_DQ_SAP_Name_And_Address_Match are:
REC_NUM
NAME_FIRST
NAME_LAST
NAME1
NAME2
HOUSE_NUM1
STR_SUPPL1
STREET
CITY1
COUNTRY
POST_CODE1
REGION
ADDR_TYPE
MTCSTD1
MTCSTD2
PO_BOX
POST_CODE2
THRESHOLD
I want to replace one of the fields (i.e ADDR_TYPE) with "Account_group" column.
The idea is replace, not create of additional fields ( as described in SAP BusinessObjects Data Quality Management (DQM): Enhancements for more fields other than address data for Duplicate Check SAP Business Objects Data Quality Management ( DQM ) Enhancements for more fields other than address data for Duplicate Check.).
Could you please let me know if the standard XML file sent by the RFC server contains the Account_group column.
Any other suggestions and ideas are welcome
Thanks in advance
Goran

Hi,
the additional data tab is controlled by means of classes created in DMS.
if your requirement is something like,
project name
responsible person name etc..
for this - in CL01, you can create class, say Project XYZ
in CT04 - you can create characteristics as project name and person name..etc for this class.
in each characteristics you can maintain the values which will serve the requirement.
hope this helps U..!
Thank You,
Manoj
award points if useful..!

Replacing glass LCD cover on a Canon EOS Rebel T2i digital camera

I've got a T2i and the protective cover over the LCD screen is scratched. I've ordered the replacement screen and tape from Canon but there are no installation instructions. I've read some on Internet but was wondering if anyone had any experience/instructions on removing damaged screen and replacing it.
Thanks

This may help you.
http://photography-on-the.net/forum/showthread.php?t=922334
"A skill is developed through constant practice with a passion to improve, not bought."

Pre-validation user exit to replace input values (unit of measure)

Hi experts,
I have a quick question in regard to applying a user exit when saving data through an input template into a real-time cube. I'm not a planning expert, but what I'm trying to achieve is to replace a field value with another one before any validations take place (folks submit a row with UoM 'TIB' and I need to change that to 'TB' before saving the data?
The issue here is that in the above exampe 'TIB' is a UOM that gets extracted from a non-SAP source and there's no ETL process in place that could take care of that before it gets input/loaded into BW (IP). Also that UOM isn't maintined in BW.
Thanks a lot,
Fabian
Edited by: Fabian Binz-Scharf on May 18, 2011 11:23 PM
Edited by: Fabian Binz-Scharf on May 18, 2011 11:23 PM

Hi,
I would add a rebooking function directly after the step where the data is loaded or entered and just change the value of UOM in the rebooking.
regards
Cornelia

HP 1018 replacement input tray/cover!!!!

Similar Messages

Maybe you are looking for