HP 110-023 how to check motherboard volatges

I have a freind at work who owns the computer in question...  It's one month out of warranty and the hard drive died while doing a recovery backup after being notified that drive crash was imminent.  The DVD drive had previously died also.  Since I had an older PC which had similar symptoms but came back to life with a new power supply, I suggested that he check the power supply voltages.  Of course on this model, the power supply is external, which leads me to beleive that it has some DC-DC converters to provide the different voltages required.  So I'd like to get a diagram showing the locations of the various voltages to ensure the power on motherboard is correct before he goes out and buys a new hard drive and DVD drive.  I.E: if the motherboard has a problem, why waste the money.   You can e-mail me the diagram.  Thanks 

Hi, No such HP diagram exists and if it does exist it hasn't been posted.

Similar Messages

  • How to check up Integrity of basis on the server ?

    How to check up
    1. Integrity of basis on the server
    2. Presence of necessary fields in bases
    Why ask ?
    There is for a long time imported in ZCM station XP.
    In properties of agent ZCM at this station I see that all politicians are applied successfully.
    In the https://zcmserver | ws Xp_KAP| Relationships | Assigned Policies | Inherited
    for Dynamic Local User Policy "01UsersRightsDLU" Deployment Status = Unknown.
    If remove (unreg) from ZCM this WS and import Again - all properies will be OK...
    ( I have some such for a long time imported machines with similar problems. )
    Serg

    Originally Posted by AndersG
    Skoltogyan,
    > Thanks. I will look forward to hearing
    Sorry. I shuould have spotted that myself. The command you entered is wrong. You entered:
    /opt/zdc # ./zdc verify -b /var/opt/novell/zenworks/database/zenworks_AMI_COMPANY_ZONE.db
    Should have been:
    /opt/zdc # ./zdc verify -b /blabla/zcm_10.x.x.zdc
    Ie you enter the full path to the baseline file, not the database for -b
    Anders Gustafsson (NKP)
    The Aaland Islands (N60 E20)
    Novell has a new enhancement request system,
    or what is now known as the requirement portal.
    If customers would like to give input in the upcoming
    releases of Novell products then they should go to
    http://www.novell.com/rms
    cd /opt/zdc
    ./zdc verify -b
    and in the log-file get 3 errors:
    1)
    + Initializing native libraries.
    [ERROR] [ZDCNative]
    [!] Could not load native library, native features will be disabled
    [DEBUG] [ZDCNative] /opt/zdc/lib/native/libzdcnative.so: librpm-4.4.so: cannot open shared object file: No such file or directory
    java.lang.UnsatisfiedLinkError: /opt/zdc/lib/native/libzdcnative.so: librpm-4.4.so: cannot open shared object file: No such file or director
    y
    at java.lang.ClassLoader$NativeLibrary.load(Native Method)
    at java.lang.ClassLoader.loadLibrary0(ClassLoader.jav a:1751)
    at java.lang.ClassLoader.loadLibrary(ClassLoader.java :1676)
    at java.lang.Runtime.loadLibrary0(Runtime.java:822)
    at java.lang.System.loadLibrary(System.java:993)
    at com.novell.zenworks.zdc.system.platform.ZDCNative. initialize(ZDCNative.java:20)
    at com.novell.zenworks.zdc.system.platform.ZDCNative. <clinit>(ZDCNative.java:33)
    at com.novell.zenworks.zdc.DiagnoseZen.startZDC(Diagn oseZen.java:105)
    at com.novell.zenworks.zdc.DiagnoseZen.start(Diagnose Zen.java:64)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:592)
    at com.novell.zenworks.zdc.boot.Bootstrap.main(Bootst rap.java:110)
    [INFO ] [DiagnoseZen]
    + Attempting to connect to database.
    [TRACE] [DatabaseConnector] Establising JDBC connection.
    [TRACE] [DatabaseConnector] JDBC connection established.
    [INFO ] [DiagnoseZen]
    2)
    [ERROR] [ZDCNative]
    [ERROR] [FileVerifier] File '/opt/novell/zenworks/share/tomcat/webapps/zenworks-reportadmin/WEB-INF/web.xml' is missing!!!
    [ERROR] [FileVerifier] File '/opt/novell/zenworks/share/tomcat/webapps/zenworks-reportadmin/WEB-INF/classes/com/novell/zenworks/webservice/reportadmin/ReportAdminImpl.class' is missing!!!
    [ERROR] [FileVerifier] File '/opt/novell/zenworks/share/tomcat/webapps/zenworks-reportadmin/WEB-INF/classes/com/novell/zenworks/webservice/reportadmin/ReportAdminTieSkeleton.class' is missing!!!
    [ERROR] [FileVerifier]
    3)
    [TRACE] [DBObjectComparer] Constraint 'fk_zDevice_ZUID' is okay.
    [TRACE] [DBObjectComparer] Comparing Triggers
    [ERROR] [DBObjectComparer] Mismatch in Trigger 'tg_IsRetired_Ins_Upd' structure!!!
    Expected: [Name: tg_IsRetired_Ins_Upd, Table: zDevice, Definition hash: 5e61ed8]
    Found : [Name: tg_IsRetired_Ins_Upd, Table: zDevice, Definition hash: d789549a]
    [DEBUG] [DBObjectComparer] Additional Information:
    create trigger -- when zDevice is retired or unretired let NC_Workstation know
    tg_IsRetired_Ins_Upd after update on
    zenadmin.zDevice
    referencing old as oldtable new as newtable
    for each row
    begin
    declare @Retired1 tinyint;
    declare @RetiredDate1 datetime;
    declare @ZUID1 binary(16);
    if(newtable.Retired <> oldtable.Retired) then
    set @Retired1=newtable.Retired;
    set @ZUID1=newtable.ZUID;
    if(@Retired1 = 1) then
    set @RetiredDate1=newtable.RetiredDate;
    update NC_WORKSTATION set
    NC_WORKSTATION.IsDeleted = @RetiredDate1
    where NC_WORKSTATION.ZenWorksAgentID = @ZUID1;
    update NC_COMPONENT set
    NC_COMPONENT.IsDeleted = @RetiredDate1
    where NC_COMPONENT.IsDeleted is null
    and WORKSTATIONOID = any(select WORKSTATIONOID from NC_WORKSTATION where ZENWORKSAGENTID = @ZUID1)
    else
    set @RetiredDate1=oldtable.RetiredDate;
    update NC_WORKSTATION set
    NC_WORKSTATION.IsDeleted = null
    where NC_WORKSTATION.ZenWorksAgentID = @ZUID1;
    update NC_COMPONENT set
    NC_COMPONENT.IsDeleted = null
    where NC_COMPONENT.IsDeleted >= @RetiredDate1
    and WORKSTATIONOID = any(select WORKSTATIONOID from NC_WORKSTATION where ZENWORKSAGENTID = @ZUID1)
    end if
    end if
    end
    [ERROR] [TableHelper]
    [!] 1 errors found while verifying Triggers of Table zDevice
    [DEBUG] [TableHelper] Verifying table 'zDeviceCreationInfo'
    [TRACE] [DBObjectComparer] Comparing Columns

  • The database structure has been modified - how to check if it happend?

    Hello,
    I have a question. How to check if the database structure has been modified? I know that there is shown a messagebox after creating table and adding some fields, but sometimes this message appear after some seconds. The problem is that I want to create table and UDO for this table, and until database structure is not modified I got an error message. If I wait and DB strucuture modifies then UDO is creating correctly.
    My question is - does anyone know how to check if database structure has been modified?
    Regards,
    Hmg

    Hi Szymon,
    I guess you are stuck up in a kinda scenario, where in, you will be populating a form with values, before the structure modifies, if this is going to be your problem, I can help you out with a work around.
    In the beginning of the process, before the creation of the UDO or tables, set a boolean value to false, and once all UDO's and Tables are created, only then, should you make it true and only after the boolean becomes true, you should proceed with populating the values from the screen.
    I really ament sure what your problem is, but one of my guys faced this problem, I then, thought even you might have a similar problem.
    Satish.

  • How to check connection from SAP to reservation system?

    Dear Experts,
    May I know how to check whether the connection between SAP and the reservation system has been set up and ready to use?
    Thanks.

    Hi
    You need to check the identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
    External reservation system In the Travel Planning subcomponent Travel Management accesses an external reservation system connected to R/3 to carry out the queries on available travel services and to book the selected services. The reservation system currently available is the AMADEUS Global Travel Distribution system.
    For more information, see Technical Prerequisites for Travel Planning--
    Technical Prerequisites for Travel Planning
    Before you can use Travel Planning fully, a number of internal R/3 and external prerequisites or settings must be fulfilled.
    Connection to an External Reservation System
    The online booking function in Travel Planning is based on the cooperation with external reservation systems that are used to communicate with the service providers. The R/3 user has access to the following functions via the connection to an external reservation system:
    u2022 Availability query of travel services
    u2022 Transfer of additional information about selected travel services
    u2022 Price information
    u2022 Processing of reservation by the respective provider
    u2022 Synchronization of the data in SAP Travel Planning if external booking changes have been made
    In the current release the external reservation system in use is AMADEUS Global Travel Distribution. AMADEUS is a subsidiary of Lufthansa, Air France, Continental Airlines and Iberia. The reservation system it provides is in worldwide use and 160,000 terminals in 37,000 travel agencies and ticket sales centers in over 130 countries are connected to it.
    In order to carry out online booking via AMADEUS the following must have been carried out:
    u2022 Your enterprise must have signed an agreement with AMADEUS for the use of the interface and be registered at AMADEUS with a user ID
    u2022 A network connection to the AMADEUS computer center must have been opened
    u2022 The identification code issued to the enterprise by AMADEUS must be entered in the R/3 Customizing for Travel Planning under Master Data u2192 Control Parameters for Travel Planning u2192 Define sales offices and Define API access parameters.
    For questions about registration, contact the SAP & AMADEUS Competence Center:
    SAP & AMADEUS Competence Center ACC 02 Neurottstrasse 16 69185 Walldorf Germany
    Cheers
    Mukta

  • How to check SSO user from database?

    Hi:
    I've posted this topic in Forms forum:
    How to check SSO user from database?
    then as I've been told, it's better to post it here, so ...... here is the question:
    I'm writing a "before delete trigger" to insert into log table before delete. Is there a way that I know from database the current SSO user when SSO users share one database user?
    Just like in Oracle Application Express there is v('APP_USER') to know the current user.
    Saad,

    End users are manipulating data through Oracle Forms(and SSO through portal) and the thing I need is to trace the SSO username from database without modifying forms, I mean purely from database taking into consideration that SSO users are sharing one database user. Is it possible?
    Saad,

  • How to check  if all values from a dataset  has come to  an internal table

    How to check  if all values from a dataset  has come to  an internal table ?

    Hi,
    After OPEN DATASET statement check if sy-subrc = 0 if its success then proceed with split statement and save the dataset values into a internal table and while debugging the internal table you will find that whether all values get into internal table.
    Checking sy-subrc after OPEN DATASET statement is must to fill up the values in the internal table.
    For e.g.
    OPEN DATASET p_inpfile FOR INPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc NE 0.
        WRITE :/ 'No such input file' .
        EXIT.
      ELSE.
    READ DATASET p_inpfile INTO loc_string.
          IF sy-subrc NE 0.
            EXIT.
          ELSE.
            CLEAR loc2.
    *Spliting fields in the file-
            REPLACE ALL OCCURRENCES OF '#' IN wa_string WITH ' '.
           SPLIT wa_string AT const INTO loc2-pernr
                                           loc2-werks
                                           loc2-persk 
                                           loc2-vdsk1.
    Hope you get some idea.
    Thanks,
    Sakthi C

  • How to check vendor payment

    Hi gurus,
    how to check vendor payment is done are not in purchase order
    Regards
    murali

    Check through FBL1N vendor line item display, here you can check for the vendor libality generated during invoice (MIRO) posting once you get into the t-code FBL1N select the radio button open items only in line item selection give your vendor account, company code date (Key day at which the line items are open till now), and execute.
    In the report screen to help your self you can search using crtl + F and put reference as serach criteria.
    You will see the non cleared item the Status indicator tells you the line item is not yet cleared.
    BR

  • Open Slaes Order-How to check and close ?

    Hi,
    We have an open sales order which looks like the delivery is closed and 100% completed, but the sales order is still open!
    Now i know this is an ongoing issue which has several possible reasons for and i have used a script to see what is returned but nothing.
      Can you let me know how to check if there were any changes made in any particular Sales orders ?
    eg comparing open items list of sales orders with something ?
    Thank you in advance,

    Hi,
    Yes we ran the query in note 948670 and it came back zero for all?! See below for details.
    This is what has thrown us so what is the simplest way to check why a SO remains open i.e how to check if there were any changes made?
    Rdr u2013 0 Rows
    Dln - 0 Rows
    Rdn - 0 Rows
    Por - 0 Rows
    Pdn - 0 Rows
    Rpd - 0 Rows

  • How to check RG1 Opening and Closing balance

    Dear All,
    Kindly let me know how to check the opening balance and closing balance in RG1 register.
    Regards,
    Mullairaja

    Dear J Prakash,
    Do we need to check the balance based on Excise Transaction Type?
    I assumed that, we need to check as per the Registers.
    Similary, please clarify another doubt also.
    On what basis we need to check Excise balances?
    1. Based on Excise Registers
    2. Based on Excise Transaction Types
    3. Based on G/L accounts.
    Regards,
    Mullairaja

  • How to check Mobile Balance

    Hii
    how to check mobile credit  balance...?
    my ios version is 7.1.1
    my network in INDIA
    while enter the *123# ...it will going a call...
    no balance ll comeing
    so please find the solution for this

    Ask your carrier.

  • How to check for a function module with its description and functionality

    Hi all,
    How to check for a function module,with its description and its functionality,in detail how can I know the purpose of a particular function module,how to search for a function module which suits my requirement .

    Hi,
    You can search a FM of your requirement by putting in the Key words and searching for a FM. Like * KEYWORD * and then pressing F4.
    Say for example you need to search something regarding converstion.
    Search for * CONVERT * and press F4.
    If there is something specfic like converting date to something you can give
    DATE * CONVERT *
    OR
    CONVERT * DATE *  and press F4.
    Once you narrow down your search you will have a Function module documentation inside the Function module. Please note that all the FMs willl not have documentation.
    Regards,
    Pramod

  • How to check Cancelled invoices

    Hi Gurus,
    Can anybody please let me know how to check cancelled invoices in costing. Also please let me know the importance of VBRP table in costing. Thanks.
    Regards,
    S.Sumana.

    HI
    VBRK-FKSTO field can be used to check the cancelled invoices,
    If you mark this field as X  then you can get the list
    Thanks
    Prashant

  • How to check whether a file is present in the UNIX directory of app. server

    Hi,
            I am creating files in the UNIX directory in the application server using :
                       CONCATENATE '/sapmnt/RD1/interfaces/client670/'
                       p_fname '.CSV' INTO w_filename.
               OPEN DATASET w_filename FOR OUTPUT IN TEXT MODE.
              LOOP AT t_output1.
                      TRANSFER t_output1 TO w_filename.
              ENDLOOP.
             CLOSE DATASET w_filename.
    I am unable to check whether a file with the same name exists or not. How to check the duplicate state of the file.

    You can use the following fm
    RZL_READ_FILE
    or
    use OPEN DATASET FOR INPUT.

  • R12.1.1 staging complete! How to check whether the stage is Good

    Hi Gurusl,
    I have completed staging R12.1.1 for Hp unix B.11.31. I want to know how to check whether the stage is good for installation or whether it is corrupted. Is there any metalink note or script from where we can check it. Ur help will be highly appreciated. Thanks in advance
    regards,

    Hi,
    Please refer to (Note: 802195.1 - MD5 Checksums for R12.1.1 Rapid Install Media).
    Regards,
    Hussein

  • How to check whether a Segment is added manually or automatically in IDOC?

    Hi,
    I have an IDOC number with me. i had opened that in WE02. it contains a Z Segment (for a Field PARENT_NAME) added under an Extension in the DATA records of the IDOC.
    i want to know how can i check the Z Segment, whether it has been added manually or is coming automatically in the IDOC?
    i had checked with my Functional. He says that when he manually included Z Segment and processed the IDOC, invoice document text(PARENT_NAME field) is coming fine.
    How to check For automatically pick up of this Z Segment in the IDOC?
    Guys Please help!!

    Follow below steps to find where the segment is being populated if the IDOC is outbound
    1) Goto SE11
    2) Type is segment name in structure field
    3) check the where used list.
    This will show all places where the structure is being used.

Maybe you are looking for