HP 1317 - permissions and missing menu options - any ideas?

I've just installed that latest drivers from August 2006 for the HP 1317 (All in one) from their website and have a couple of problems.
The dropdown in my print dialog shows:
Copies & Pages
Layout
Scheduler
Paper handling
Colorsync
Cover page
Safari
Summary
There is no way to set the print quality (b&w, best/faster etc) any more.
Secondly, Verify Permissions in Disk Utility after the driver install shows loads of HP drivers with incorrect permissions. I have a feeling that if I fix these then I will be greeted with one of the popup menu options turning into hp_131 .. something with a score line through it. This has happened before but I don't want to try again!
This option has been OK before but I'd like to know how to get it back. Do I have to restart after installing new drivers?
Thanks in advance.

I guess I need to add some clarification to my problem. The issue is not within the forum itself, rather in Acrobat Pro v9.3.2 (Windows).
When I open Acrobat Pro (without holding the Shift key down) some of the menu options are not available. For example:
Forms > Start Form Wizard [not present]
Forms > Manage Form Data > [no sub menu options present]
Additionally, when I open Acrobat Pro (without holding the Shift key down) and select, from the main menu bar, "Edit > Preferences", I receive the following error message:
Failed to load an application resource (internal error).
I have looked at doing a repair, but the only option in the Add/Remove Programs is to "Remove".

Similar Messages

I have a new computer with Windows 7 professional, Office 2007, Adobe XI. I have just created a word document and tried save it as a PDF but the PDF option doesn't appear in the drop down menu. Any ideas please? Thank you.

I have a new computer with Windows 7 professional, Office 2007, Adobe XI. I have just created a word document and tried save it as a PDF but the PDF option doesn't appear in the drop down menu. Any ideas please? Thank you.

What is "Adobe XI" - Reader, or Acrobat?
But either way, 'Save as Adobe PDF' is a Word function, independent of what Adobe software you have installed.

Missing Menu Options in Flash Builder

I encountered a mystery surrounding several missing menu options in one of my Flash Builder workspaces recently. I wanted to create a new skin for a List control so I right-clicked on my skins folder and looked for the New MXML Skin option. And I looked. And I looked some more. But it wasn't there.
I happened to have another copy of Flash Builder open in another workspace so I gave it a try in that project. Sure enough, the New MXML Skin option was there along with a couple of other options that were missing in the first workspace. Here's a list of the menu options missing from the File --> New menu in this workspace:
Flash Professional Project
MXML Item Renderer
MXML Skin
I'm not sure why those menu options went missing but I was able to work around it by recreating the workspace. I simply created a new workspace, copied all of the projects into the new workspace folder and then imported all of my projects into the new folder. I then had a full set of menu items.
I poked around a bit trying to figure out what went wrong but wasn't able to find a conclusive answer. My best guess is that it has something to do with the fact that I was previously running the Flex 4 beta and that's when I created the workspace with the problem. I compared the workspace .metadata folder and, curiously, there were 25 folders inside the .plugins folder for the problem workspace but only 12 for the newly created one.

This is an eclipse thingy, menus get cached in the workspace' metadata. If you try using a newer build of Flash Builder with a workspace from the previous version, you may notice this behavior.
The workaround is to create a new workspace and import all projects there.
-mayank

Wouldn't be a handy update if at the top of the open Pages document, next to the Apple and Pages menu option, it showed the open document name or file name?

Just as the title says, really.

I'm not sure where the Apple and Pages menu option is. When I'm editing a document in iCloud Beta the name of the document is in the window caption (below).
But your suggestions should be sent directly to Apple and you can do that via the Send Us Feedback button at the top of the document list page:

I cannot see my itunes library on the main menu under computers despite the network being active and the home sharing on on both the devices the mac and apple tv. Any ideas?

I cannot see my itunes library on the main menu under computers despite the network being active and the home sharing on on both the devices the mac and apple tv. Any ideas?

Hi Monty,
Sorry to say it, but this is normal for Apple TVs. I've owned a TV2 and a TV3, and neither lasted for an entire year. They are quite fragile and of low quality, and as you can see here, quite fussy even when they work. The wi-fi receiver on these are cheap and unreliable.
Consider the $99 an annual rental fee. They rarely work for a whole year, so if you are going to use the platform, you will have to replace them constantly.
Also, when one dies under warranty, never, never send it to Apple for repair. Go to the Apple Store for replacement. I sent my ATV3 in for warranty repair using a box sent to me by Apple, and although FedEx tracking showed it was accepted by Apple, it was never seen again. Apple won't replace it or even return my calls.

Enhance - Convert to Black and White menu Option 'issue'...?

Just an observation, more like an infuriating 'niggle'...
When I use the 'Convert to Black and White' menu option in Photoshop Elements 10, it does a good job, but it still leaves the file in RGB format (Colour)??
I am working for a Publishers, and I keep forgetting to convert the file to Grayscale after running the Wizard.
Wouldn't it have been easier to add this as an option at the end, and have they done this in Photoshop Elements 11 (or later...)??
It seems to me to be something that you'd expect the package to do...???
Lee Cooke

No, this option isn't part of convert to black and white anywhere, since it's not something you normally want to do because it greatly limits what else you can do to your photo (many tools and commands are only available for RGB photos). I realize that in your particular situation it's an annoyance, but although I think adobe makes a lot of goofy decisions, I can see why they chose not to do that here.

After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2. After clicking the download button, the screen just turns dark and is frozen. Any idea what is happening?

After upgrading to Mavericks on my MacBook, I'm not able to download third party applications like Dropbox and MyCleanMac 2. After clicking the download button, the screen just turns dark and is frozen. Any idea what is happening?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

My Mac will not start up i have tried safe reboot and verify file from disk utility to no avail am reinstalling Yosemite but couldn;t do it to recovery and its taking hours any ideas please

Followed some instructions to reboot as will not start and its taking ages any ideas please

Slow down and write clearly. What you're writing doesn't make sense. You need to write exactly what the problem is, and make understandable. Otherwise, no one will respond to you help request.
This (I May have found solution in 7 Mac start u options every os x user should know on a forum , gives recovery mode etc I had started to try to download yosemite again but that's what was taking forever! So I stopped it going to try the 7 options listed if not appointment at Genius - note to all back up your work, pictures etc I will be debased if they cannot recover them...) is slang. We don't speak slang.

I have some old pagemaker files that I need to open so I have bought a G3 on ebay. It turns on OK but all that comes uo on the screen is an envelope with alternating question mark and apple logo. Any ideas?

I have some old pagemaker files that I need to open so I have bought a G3 on ebay. It turns on OK but all that comes uo on the screen is an envelope with alternating question mark and apple logo. Any ideas?

I suggest you get 9.2. You need to install the same or later version of the OS. One some computer the shipped version has extra drivers. The drivers will not be in the official release in this case 9.1. They would be in 9.2.
Mac OS 9.1 (Mac OS ROM 7.5.1) and Mac OS X 10.0.4 (4P13)
*blinking question mark*
The blinking question mark means that your mac firmware could not find a valid operating system
on one of your disk volumes.
Somethings to do to resolve the blinking question mark.
http://docs.info.apple.com/article.html?artnum=58042
Try holding down the option key then power on. This brings up the startup manager. Click on your hd. Click on right arrow key.
You need to figure out the level of your firmware before installing 10.2 or greater. ( The PC name for firmware is BIOS. ) Installing 10.2 with a down level firmware will most likely make your iMac unusable and difficult to fix.
What is firmware?
The firmware software receives control when you poweron your machine. It does some hardware testing and some hardware configuration then passes control to your version of Mac OS. It reside on a PROM ( program read only memory ) chip on the logic board.
Figuring out what level of firmware you have?
Open Firmware, boot into Open Firmware.
Power on your iMac while holding down command+option+o+f
The first output line contains the firmware level. Mine reads:
Apple PowerMac4,1 4.1.9f1 BootRom built on 09/14/01 at 13.18.04
Copyright 1994-2001 Apple Computer Inc.
On my machine, I have 4.1.9f1.
What firmware do you need?
http://docs.info.apple.com/article.html?artnum=86117
For a slot loading iMac, this article indicates that you need to be running 9.1 or later version of Mac OS Classic.
http://docs.info.apple.com/article.html?artnum=75130
"The iMac Firmware Update 4.1.9 will only run on iMac computers with lot-loading CD or DVD drives running Mac OS 9.1 or later from a local drive. If you are using Mac OS X you must boot from a local Mac OS 9.1 or later writeable partition (not a CD, or network disk) prior to following the update instructions."
You can download the Mac OS 9 updates from the Apple site.
http://support.apple.com/kb/HT1387?viewlocale=en_US

Having trouble captioning my photos ahving optimised and repaired the catalogue - any ideas please?

I'm having lots of difficulty captioning my photos in organiser and have repaired and optimized my catalogue - any ideas please?

Try adding captions via the properties panel. Right click on your first thumbnail and choose Show Properties from the bottom of the context menu.
You can enlarge the panel by dragging the bottom right corner. Make sure you are using the general tab. Enter your text in the caption field, then use the right arrow key to move to the next thumbnail.
It’s an alternative way of adding captions which uses less memory than opening images full screen.
Click to view

TS3276 An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?

An email sent from my iMac has a button linked to a clip hosted on Vimeo. When received, the link functions on iMac and iPad, but opens a window of app icons on iPhone and iPod touch. Any ideas what's wrong?

For anyone else reading this thread, it is worth knowing that sometimes an email is, or can be, corrupted thereby jamming the works. The solution above is good, but I just wanted to suggest another one.
If the problem arises, go to an online mail access service, such as Mail2Web.com and login to you mail account there and delete the offending message.
Problem solved.
And George, as this is all entirely voluntary, whinging about no takers may not endear people to you. Besides which, a few minutes of searching on Google would have found you a number of solutions.

Hi chaps. FaceTime question. I can FaceTime by phoning my iPhone 4 from my iPad 2 but cannot phone my iPad from the iPhone. When facetimeing from phone to iPad the phone says it's busy. The iPad rings once and then stops. Any ideas. Regards Jon

Hi chaps. FaceTime question. I can FaceTime by phoning my iPhone 4 from my iPad 2 but cannot phone my iPad from the iPhone. When facetimeing from phone to iPad the phone says it's busy. The iPad rings once and then stops. Any ideas. Regards Jon

Perhaps this discussion will help with your issue,
https://discussions.apple.com/message/16502324#16502324

I can no longer access the itunes store and don't know why.the browser bar at the top loads half way and then stops. Any ideas?I am on windows 7.Thanks.

browser bar at the top loads half way and then stops. Any ideas?I am on windows 7.Thanks.

it seems to work when you reset the port
try this only after you've made sure that any antiviral/firewall software isnt blocking iTunes and the internet connection settings are fine
1. go to windows, accessories and right click on command prompt and run as administrator
2. type in netsh winsock reset (i know sounds ridiculous but it works type WITH SPACES) and press enter
3. Message saying "winsock reset successful now reboot your computer"
4. restart your computer, and open iTunes..backup should run much smoother and faster
5.Click on iTunes store might be working now

I have upgraded to an Iphone 6 and am at IOS 8.2. My calendar alerts no longer show up as notifications on my phone. I have gone into settings and double checked that notifications for calendar was on and it is. Any ideas on a fix?

I have upgraded to an Iphone 6 and am at IOS 8.2. My calendar alerts no longer show up as notifications on my phone. I have gone into settings and double checked that notifications for calendar was on and it is. Any ideas on a fix?

I have iPhone 4s but the same problem with calendar on 8.2 iOS - no sound, no notification appears - but everything is switched on.

Every time I try to export or publish my project it result in a error and closing de program, any idea ???

Every time I try to export or publish my project it result in a error and closing de program, any idea ???

Hi,
That link takes you to the Facebook for iPhone app.
You have posted in the Mac App Store for Mac OS X. (I know it's somewhat confusing especially with the new forum format).
Try deleting the Facebook app from the iPhone by pressing down on the app on the iPhone until it jiggles then tap the circle with an x in it. Then tap the Home button to stop all the apps from jiggling.
Now tap the App Store icon and and re download the Facebook app again.
If that doesn't make a difference, post over in the iPhone Discussions forum at this link.
https://discussions.apple.com/community/iphone/using_iphone
Carolyn

HP 1317 - permissions and missing menu options - any ideas?

Similar Messages

Maybe you are looking for