HP 1320 Printer with Airport Extreme Problem Solved with Leopard

This may be of interest. I appear to have solved my printing problems using an Airport Extreme with an HP 1320 printer.
It appears that all of the options for the printer must be specified. These options include the "Fit to Page" option in Print&Fax/Options&Supplies/Driver; the "Media Type" in Print/Finishing; the "Printer Resolution", "Resolution Enhancement", and "HPEconoMode" all in Print/Image Quality. If all of these are specified, the printer will print without user intervention.
Hope this helps,
David

There are no specific settings on the Apple router to allow a PC to connect. It broadcasts the same signal for all.
Have you checked the Windows firewall on the PCs to see if that, or possibly the anti-virus software is blocking the attempted connection?
I've had both XP and Vista machines, and in each case I had to go into the Firewall settings to tell the application to "allow" the connection that was being blocked. No problems at all after that. Not sure if this is your issue or not, but it would be the first place I would look.

Similar Messages

Will a WD hard drive work with AirPort Extreme to connect with an iPad Air

Will a WD hard drive work with Airport Extreme to connect by a iPad Air

If you already have an AE and a WD drive .. the best idea is plug it in and see on a mac in airport utility is the drive recognised.
If not you have problems.. if it is formatted correctly (Not NTFS mainly) then it can be a drive that is not compatible.
assuming it works get your ipad and pay for filebrowser or at least download a test copy and see how it goes.
Always the best way to find out.. try it.

Printer and AirPort Extreme Base Station with Gigabit Ethernet

Hello!
I own a macbook, one windows xp pc, and two windows vista notebooks. I bought a airport extreme base station. I set it up with my macbook at first and I do a print and it works. I do the same with the others. I install the printers drives to all notebooks. Then tried to print and only one of them worked. They all have bonjour download for windows. So i restarted all the pc's and mac and tried to print and never prints. On the pc's i get a error message. On the mac i get an its busy and never prints. All of them connect to the internet, but no printing. I have the printer connected to the base station. I did two prints and then I couldnt print after that. Internet works. Please i need some help to fix this. Thanks in advance

Hi
Maybe you already have fixed your printing problem. I'm no expert but I sometimes have had printing problems and I feel for you. However, first of all. What sort of printer do you have? It sounds to me that one of the pc printing documents got stuck somewhere on its way to the printer and now it is taking up space on the network (figuratively speaking ofcourse). I can recall something happening to my network/printer some years ago. Unfortunately I can not remember what I did to fix the problem but if I were you I would do the following: First I would disconnect the pc from the network and then try to reset the printer clearing its print memory. Then I would try to get the mac to print again. If succesfull I would take the mac off the network and connect one of the pc's and get that to print. If I succeded I would repeat the procedure with the other pc's. If I wasn't succesfull I would clear the memory again and then try with one of the other pc's. But I would only try one computer at the time to try to isolate the problem. Maybe you have already tried this and since pc's are a mystery to me I dont't know how to help you in that department. However using bonjour on the pc's I would not expect to have problems (though I use Windowc XP print menu on my vertual pc - works fine).
Hope that you will solve your problem soon.
Berit

Another usb printer-to-Airport Extreme problem

This issue is similar to Tanya Howie's, but involves an HP 5440 printer instead of a Pixma. I have the G4 iBook connecting via Airport to the Airport Extreme, the iMac Snowball hardwired to the AE via Ethernet cable, with the HP plugged in via usb to the AE. I have reinstalled the AE software 7.4.2, the HP software 5.3, and the Airport utility 5.4.2. Also, I connect to the internet via RoadRunner thru Warner Cable.
Occasional disconnects have been cured by resetting everything back up, until recently. Now, when I look at all the places where the printer should appear, I see it listed: in the Airport Utility settings, on the printer setup utility, the File dropdown Print command, in the dropdown Printer box and choosing Bonjour version of the HP, even in the Opening Connection box, which shows the attempt at opening the connection; the connection bar shows an attempted Print, then goes to Job Stopped.
When I run the Print Diagnostics that is in the HP 5440 menu bar, I get a green light on Airport, Airport Settings, Network Settings, ISP, and Internet, but a red light on Server, which also says Failed. If I click Continue and go thru the steps of the diagnostics, the last page says "Cannot connect to server: Networks Diagnostics was able to connect to the Internet, but not to the server 'HP Deskjet 5440 printer.riousbprint.tcp.local' . This could be caused by problems with the server, or an Internet problem between this computer and the server."
Where is this server, and can someone tell me how to address its issues or to find a work-around? And is there a step I have missed? Thanks!

I rolled back to 7.4.1 to try to fix my dropouts and slowdown problems, but that didn't make any difference. So I went back up to 7.4.2, but did the hard reset by
1. unplug Airport Extreme
2. Press in reset button on the back and hold it in while...
3. Plug in power
4. After light on the front started to flash, released the reset button
I then had to reset all the networking settings (password, SSID, etc) but that only took a few minutes and a couple of resets. The network dropouts haven't happened again so I'm hoping that has sorted it. The printers seem to be behaving themselves as well now. I did roll back to 7.3.2 at one point, but then I lost the printers completely with that and Snow Leopard (Leopard was fine though).
There was a posting I found from somewhere that said about setting up the printer using the IP connection setting rather than the automatic one, but I can't remember where I found that. Let me have a quick think...
Ok, I think this was the page (the instructions are very similar anyway)
http://pcworld.about.com/od/networkin1/Bugs-amp-Fixes-Ethernet-net.htm
Good luck.

USB Drive Sharing with Airport Extreme Problems

We have a airport extreme with a usb disk attached and shared. We also have 2 vista systems and 1 xp system accessing the usb drive. In the airport extreme utility, file sharing is enabled with a device password. We map a drive to the usb drive and enter the username like such:
local pc-name\address of the airport extreme
and password is the airport extreme password. This will allow us to view and modify the contents of the usb drive but when we log out of any of the windoze systems, we are again prompted to enter username and password for the mapped drive. This is not the way it was designed, right? We also, in the map drive dialog box, select "reconnect at logon" and connect using a different name/credentials and still asked for the username and password when logging back into the windoze systems. We also tried enabling guest access on the airport utility and this will allow only 1 connection which will not work as we have 3 systems that need to access this drive. We also went 1 step further and reset the airport extreme in the event that we made some configuration mistake somewhere and this still does not work. We should be able to enter the username and password once and only once, right?

No one has any ideas about this?

Discovery issues with airport extreme and issues with airport utility

I lost about 3 hours with connection issues while trying to add a second airport express. The airport Utility couldn't find any of the units anymore. After aging a couple of years and checking lots of forums (many suffered the same problems) I found this link
http://support.apple.com/kb/HT1406#
Which seemed to help me reset the units and find them again. Though I can't be certain if it was just luck, the airport utility and detection and resetting of the express and extreme seemed solved.
I would add that this is an area that should be looked at by apple. It is not the first time that I have problems with the airport utility or the extreme.

Check the cabling to the Base Station - make sure the modem is plugged into the Base Station's ethernet WAN port (ie the port labelled with the "circle of dots" icon).
With the modem cabled to the Base Station - pull power to both for five minutes or so. Then plug the modem into power and wait a minute. Then plug the Base Station into power and wait a minute. Then try internet access again.
If that still doesn't work:
- on the Mac which can successfully connect to the internet when cabled directly to the modem, tell us what settings are found in System Preferences->Network->Show ethernet built in->PPPoE tab, and under the TCP/IP tab.
- from either a PC or the Mac connected to the Base Station, run the Airport Admin Utility, select the name of your base station, click Configure, click on the Internet tab. Tell us what settings are found under that tab.

Setting up airport express with airport extreme 802.11n with Airport Utilit

Hi,
I'm having trouble setting up my airport express(AX). Having recently bought the new Airport Extreme (AE) basestation, I can't figger out how to set it up to recognize the AX and allow me to stream airtunes. Previously I had the AX setup fine, but once I installed the AE, it no longer was recognized.
After resetting the AX, the airport Utility recognizes the AE and the AX as basestations, but I don't want to have to switch back and forth from wireless networks everytime I want to listen to music in another room. Airport Admin seemed to have been wiped out when I installed the AE, so any documents I've found on the Apple site refer to AA and not Airport Utility.
HAs anyone set up their AX on the new AE basestation?
thanks!
Rene

I am currently experiencing the same issue, except that I cannot for the life of me get the AX to:
1) Stop flashing yellow - numerous resets -soft to default.
2) The airport utility will not recognize it.
The airport utility sees the AE no problem, I got that up and running after a few restarts and am now able to log on to the network with my laptop.
I am new to Mac's and this is the 1st time I have tried to set up a network with one, I was excited about being able to use the AX to play my iTunes through the stereo in the other room and to hopefully use it to connect my X-Box to the internet. But I am starting to think that this is either above my skills or a fruitless endeavor. Any help would be most appreciated!
Thanks
Fairbanks

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I can connect the laptops to the printer. Any advise?

I have an Airport Extreme, 2 laptops with windows 7 and a wireless HP printer. I am not able to connect the laptops to the printer. Any advise?

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

Can't print with Airport Extreme

I am having trouble printing with Airport Extreme.
My printer is connected to the AE but every time I try to print I get a printer offline message.
I have tried in the past to print wirelessly but have given up.
I just bought a new MacBook Pro so I thought I would give it another go.
Thank you.

Not very much to go on here but I'll give it a stab.
Go to the Airport Utility program located in Applications/Utilities folder.
Run this and select "manual setup" for your AE displayed on the left.
Hit the Printers icon on the top. Your shared printer should be displayed here. If it's not, then ensure it's powered on, good usb connection etc.
After this shows a usb printer connected then go to System Preferences>Print & Fax. You'll see printers you have setup before on the left. A green icon usually means they are available. If print doesn't work to the desired printer the best thing to do is remove the previous definitions by highlighting the printer and hitting the "-" icon.
Now hit the "+" sign and define the shared printer. It should be listed in the resulting "add Printer" dialog. Highlight, change any naming info and click "add".
Printer should now be available. I'm assuming a supported printer that have the device drivers loaded on your system.
That's all I got.

Problem with Airport extreme and Time machine

I recently purchased a 320gig external hard drive for Time machine. I connected it to my Airport extreme but it is not being recognized for some unknown reason. If I directly connect it to my iMac it works perfectly. I've updated with the latest firmware and it should work via USB with Airport extreme. Any suggestions why it is not working?

angelop wrote:
I have used the following for about two years.
-MBP, Airport Extreme, External HD (1TB) for my time machine.
You probably know, that's "iffy" and +*not supported by Apple.+* See the Using Time Machine with a USB drive connected to an Airport Extreme *User Tip,* also at the top of this forum.
To get around this issue, I have switched off the Time Machine, and am only turning on once a week or so, to grab any changes or additions I've made. I've been doing this for about 6 months now with no problems.
Now whenever I do this, (It should only be backing up an album or two from iTunes,) it tries to back up my whole system again. EVERY TIME. It did not do this before.
If you go too long between backups, Time Machine will do a new, full backup. And once it decides to do that, it will keep trying until it succeeds. There are some other possibilities as well. See #D2 in the Using Time Machine with a USB drive connected to an Airport Extreme *User Tip,* also at the top of the +Time Machine+ forum.
If none of those seem to explain it, see #A1 there; download the TM Buddy widget, copy and post the messages here.
Why are you only backing-up once a week? Time Machine was designed to back up changes hourly, as long as your Mac is awake and the TC is in range. It will protect you best that way, and unless there's a problem, those backups will usually be very quick.
But if you're only going to back up once a week or so, then Time Machine is not the best app for you. See Kappy's post on Basic Backup, complete with links to the web sites of each product.

How to print with a wireless printer with airport extreme

how to print with a wireless printer with airport extreme

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

HT1218 why is streaming to my TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP s

why is streaming to my sony TV slowing to .4 mbps from 8.ombps while watching a netflix movie? this has become a problem in the last 2 months. This also happens on another TV but not concurrently.. Is it a problem with "airport extreme" or with the IP service? Airport extreme software is up to date.
please advise
Michaelgfrommet

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

Will a wireless printer work with airport extreme?

Will a wireless printer work with airport extreme? Such as an HP Photosmart D110.

Yes, it will as long as it is within wifi signal range of the Extreme. Of course, you'll need to go through the printer setup sequence. NOTE: The D110 is not AIRPRINT compatible, so it will not print from ios operating systems that are installed in mobile devices such as iphones, ipads, ipods. However, there are Apps that are available for non airprint printers, but their quality and effectiveness are questionable.

Airport Extreme 802.11n with Nortel VPN client

Hello,
Has anyone had any experience using the Airport Extreme 802.11n) with a PC (sorry, I have both a PC and a Mac)running the Nortel VPN client?
The new router works perfectly with the Mac but I also need to use the VPN on the PC for certain functions in my work. On my previous router (Dlink DIR625), I had to set a dedicated virtual tunnel to port 9550 to solve this issue. I think this might still be true for the Airport Extreme but I don't see how to do it. Any help would be appreciated. Thanks.

I had the same problem and an apple apple care tech walked me through it yeterday.
Call them, they were great.
JK

I can't get airport extreme to work with iPad

I can't get airport extreme to work with iPad

Ok, thanks for clarifying that for me. We have two distinctly different printing problems. Let's try tackling them one at a time if you don't mind.
In order for the iPad to print to a printer it would either have to be AirPrint-enabled or you would need another solution, like PrintCentral for iPad or Printopia. Unfortunately, I don't believe your Canon printer is AirPrint-enabled. There aren't many printers on the market that currently are. All of them, that I am aware of, are HP devices.
Now for the PC. I would go with what you have already suggested and that is try disabling either the Windows or third-party software firewall. Which version of Windows is it running? Just in case it's XP, here are two excellent iFelix articles on how to do so with or without using Bonjour.

HP 1320 Printer with Airport Extreme Problem Solved with Leopard

Similar Messages

Maybe you are looking for