Hp 1320n will not connect over the network

Hi,
I'm trying to get my macbook pro to with 10.6.8 to connect to my HP 1320n printer through the network. It works fine when I have it connected directly via USB. I'm trying to get it to work through the network. I have the printer connected to the router and My macbook pro is using wireless. It can detect it with bonjour but when I try to to print it says trying to connect then can't. I tried setting it up with the IP address that the printer has but it can't connect to it either. I got the printer address by pressing the green button on the back of it. Also is there anyway to reset the printer? it has an old host name which I can;t figure out how to change. I tried holding the green button in the back for 3 sec. I also tried turning it off and then back on while holding the green 'GO' button on the top, both failed to reset anything.
ultimatily I'm trying to get my two 1320n printers work work with my 2 computers in the office. My other is an imac with the latest version of software.
Any help is appreciated.

try making certain that you have the latest drivers installed, which you can caget fron HP. After downloading do to system prefs>>print/fax. hightlight the HO1320n (use the - key). then use the add 9+) key ang select the HP1320n icon to add the nem printer. Set the HP as your your default printer. When you go to print for the first time, make sure that the selected printed is the the HP1320. It should go. Sometimes it need to be re-created when there are multiples.
Good luck and hope this helps

Similar Messages

My wireless internet is working with all of my other devices but my imac will not connect to the network?

Can anyone help? My wireless connection is working on both my iphone4S and my ipad2, but my Imac will not connect to the network.

First run Software Update to make sure your iMac is up-to-date.
Even though things are working OK on other devices there may still be issues with your modem or router so it's best to start there. Locate the manuals on both devices and reset each. Do the modem first then the router. Next make sure the router has up-to-date firmware. If the problem continues after updating resetting and updating both devices then download and install iStumbler and let it run for about 30 minutes. iStumbler will scan your area for the Wi-Fi networks being used, pay attention to the channels each network is set to. Most routers are pre-set to channels 5 or 6 and if you are in a congested area and all the routers are set for channel 5 or 6 then you can see where there might be a problem. Set your router's channel to one not being used in your area, you have at least 14 channels to choose from. Also check to see if your router is using 802.11n, if it's not then it would be wise to upgrade the router to a faster device.
Next is if you are still having issues the problem could be your ISP's DNS settings. If you want to learn about DNS please read CNET's DNS Article and MacWorld's DNS Troubleshooting . Then use the instructions below to reset the DNS settings:
1. System preferences
2. Network
3. Click Advanced
4. Click DNS tab
5. Click + sign
6. Add 208.67.222.222
7. Click + sign
8. Add 208.67.220.220
9. Click OK.
10. Exit System Preferences

HT4199 I am trying to connect a new ipad air to my home wireless network. upon entering the password the ipad will not connect to the network. the network is good.

I am trying to connect a new ipad air to my home wifi network. The ipad sees the network, asks for a password but will not connect. Password and network are good.

Hi there sibisjo,
I would recommend taking a look at the troubleshooting steps found in the article below.
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
-Griff W.

My printer will not connect to the network and i cannot find drivers for it

I just installed Win 10 64 bit and I lost all connection o my printer it is saying I am on another network and each time i try to load the drivers for it it fails

Hello vikagor,
Thank you for visiting Apple Support Communities. It sounds like you are talking about cellular data not phone calls that's the issue.
For troubleshooting cellular data issues please see:
iPhone cellular data connection issues
Note the first symptom is, "No connection over cellular network, but works over Wi-Fi".
Take care,
Nubz

HT4623 I was given an iphone 4 (unlocked) in the UK, but despite my service provider changing the sim it will not connect to the network here in Australia. Any ideas on what the problem is?

I was given an iphone 4 (unlocked) in the UK, but despite my service provider changing the sim I'm still getting no service. Is ther something else that could be locked to a UK network on the phone? Cheers, Ray.

Expanding on what Tim said to make sure it's clear, only the carrier to which the iPhone is locked can authorize unlocking. If Optus is the original carrier, as would seem to be the case, O2 would not be able to unlock it. Only Optus can authorize the unlock, so you'll need to contact them. They say, though, that only the account holder can apply for unlocking, so you might not be able to get it unlocked and will have to work through the person from whom you bought the iPhone.
For more information, see the Optus FAQ on unlocking.
Regards.

Macbook air will not connect to the wifi network

I recently had to replace my wireless network router and now my macbook air will not connect to the network. it worked fine with the old wireless router. Now, i get a "unable to join wi-fi network" message. The network ID (SSID) and password (WPA) are the same as before. I try to manually enter the password, but continue to get the previous message.
Any help in figuring out how to correct this problem is greatly appreciated.
Also, I have several PCs in the house that have had zero problems connecting to my wireless with the new router. What am I doing wrong?

Hi,
Ever since did the last airport utility update this has been happening.
I believe the airport utility update is solely a software update. Repair permission and repair disk (boot from your installation disk A) may help.
Other wise, http://osxdaily.com/2009/12/22/mac-wireless-problems-guide-to-troubleshooting-ai rport-wireless-problems-on-your-mac/ may help, too.
Cheers.

My Macbook Pro will recognize my network but will not connect to the internet

My macbook will not connect to the internet at home. It works fine on other networks, but at home it will recognize my network name but says it will not be able to connect to the internet. This issue just sort of came up randomly. I have shut the router off (I use Verizon Vios) and reset it and that doesn't work. The little Wifi status at the top of the screen just has an exclamation point over it. I haven't changed any of the default network settings. It just stopped working. When I take it to work and use their network or free wifi available at stores etc...it connects just fine. A few weeks ago upgraded my operating system to Mavericks, but it has worked up until this morning.

Do this. Go to Apple menu / System Preferences / Network.
In the left column, click Wi-Fi. Next click Assist me, then Assistant. Follow the on screen instructions.

I have a new comcast modem i have connected to Time Capsule with cable, TC in double NAT. As when I tried it in bridge mode I cannot use Sonos, the units will not connect to the wifi network? I thought Bridge mode would make the wifi signal better??

I have the TC connected to the comcast modem, with TC in Double NAT mode. I set up the sonos music players ok. But I read that to incresae the wifi signal the TC should be in Bridge mode. Then I cannot get any of the Sonos units to connect to the wifi network.
So two questions, does the Bridge mode give a better wifi signal then double NAT?
Why will sonos not connect to the network when in Bridge mode?

A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet".How can I change ip address?

My ipad recognizes my home network but will not connect to the internet. When I click on AirPort/preferences at the top of the imac screen it says..."AirPort has a self-assigned ip address and may not connect to the internet". If this is the root of the problem,how can I change ip address?
Ipad will connect no problem to other networks.

First thing you need I think is to get your iMac connected to the Internet.
Shut down your iMac and you iPad. Then power off your router. Wait 30 seconds and power up the router.
After the router indicates that it is connected to the Internet then start up your iMac and see if it connects. If the iMac connects to the Internet then your iPad should too.
If this power up sequence doesn't work you'll have to dig into the router setup to make sure it is working properly.

After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home. I have restared the phone and toggled the router, still no connection

After updating my iPhone 5 to iOS 8.1 it will not connect to the wifi network at work even though it recognizes it. It however still automatically connects to the network at home (this is the network I used to update the phone). My iPad however does not seem to have any problem connecting. I have restared the phone, toggled the router, re-entered the network password but there's still no connection.

When your device is trying to connect to the work Wi-Fi network, go to Settings > Wi-Fi > then tap on the name of the Netowrk that she is having trouble with. Then tap on forget this network. Let the device attempt to connect again and make absolutely sure she is trying to connect to the work network and not a nearby network, then make absolutely sure the password is entered correctly.

My iphone4 will not connect to my network. My iPad and my wife's iPad and iphone4 all connect to my network. I have tried the solutions in Apple trouble shooting site. Still no connection.The "wheel" turns for 2 sec. then stops w/o connecting?

My iphone4 will not connect to my network. My iPad and my wife's iPad and iphone4 all connect to my network. I have tried the solutions in Apple trouble shooting site. I even tried the freezer option. Still no connection.The "wheel" turns for 2 secOne then stops without connecting. Anyine have a solution to this issue?

I have an AT&T contracted iphone 5. Cannot send mms to anyone but other iPhone users. If you search the Internet, you'll see that the problem is everywhere...both the carriers and Apple are actling like the problem belongs to the other, or feigning any knowledge (which is kind of funny since the no MMS thing was in an ios6 beta that was released awhile ago, so I KNOW apple knows about it). No, I'm not running a beta (obviously, I just got my iphone 5). Awesome. Have a great camera on this thing, but cannot send OR receive MMS from anyone other than other iphone users. Gotta love it.

My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet.

My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet. I tried to repair connection, tried to reboot modem several times, I even updated my computer. Nothing. All it says is that it does not detect modem. Why?

Welcome to the support community group.
First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop. Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back for 15 - 20 seconds while you reconnect it to power. Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
Then run the airport configuration utility from your laptop. Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility. Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
Check back if you're still having problems.

My iphone will not connect to the airport network since I added a security password. The ipad connected immediately. Is there a setting on the phone that I need to change?

My iphone will not connect to the airport network since I added a security password. The ipad connected immediately. Is there a setting on the phone that I need to change?

Answered this question with a reply from "how does an iphone forget a network" response

My iPhone connects to a hotel network but my iPad3 while it shows connected will not connect to the Internet.

My iPhone connects to a hotel network but my iPad3 while it shows connected will not connect to the Internet.

Welcome to the support community group.
First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop. Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back for 15 - 20 seconds while you reconnect it to power. Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
Then run the airport configuration utility from your laptop. Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility. Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
Check back if you're still having problems.

TS2972 Apple TV is not connected to the network?

After installing the latest Apple TV firmware update 5.1.1 (5433), my Apple TV will not stream music from my iTunes over the wifi network. After 15 - 120 seconds of music, the streaming stops and I get the "Apple TV is not connected to the network" message. My iPhoto is still streaming pictures and I can go to Radio and stream content.
In the "About" screen. I have 4 out of 5 bars of signal, but the IP Address number and wi-fi network name drop out randomly. I have reset and restored several times to no avail. I have reset my router several times and powered down/restarted several times. The Genius Bar folks have no answers except purchase a new one.
The system has worked perfectly until the December update.
Any answers?

This will be due to a network issue, which can come at any time
Make sure DNS is set to auto (settings - general - network)
If on wifi try Ethernet
To see a status of the network go to istumbler, netstumbler or similar to get a report. Look for signal strength, noise, nearby networks

Hp 1320n will not connect over the network

Similar Messages

Maybe you are looking for