Hp 1350 all-in-one not printing-except test page

I cannot get my printer to print.  Things show up in the que but don't print.  I checked all of the cables...unplugged, rebooted, etc., etc.  nothing seems to work.  It constantly prints out "test page" every time I turn it on.  I changed the ink awhile ago.  Help. 

I too am having the same problem with a psc 1355. The Check paper light on the printer is not on but every piece of software I try to print from says that the printer is out of paper. I am using Windows Vista.

Similar Messages

  • How do I stop my PSC1510 All-In -One from printing a test page every time I power it on?Thanks

    How do I stop my PSC1510 All-In -One from printing a test page every time I power it on?Thanks

    This occurs when the printer is not aligned completely.
    Please follow the steps mention in the link below to resolve the issue:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01336348&cc=us&lc=en&dlc=en&product=428800&tmp_...
    Please mark the post that solves your problem as "Accepted Solution"
    Although I am an HP Employee, ALL of my posts express MY opinion, and not of HP, whatsoever.

  • My 6310 All in One will print a test page but will not print from Publisher, Notepad, etc. WTH?

    My HP 6310 will print a test page fine, but will not print from Publisher, Notepad, etc. It goes thru the motions, but the image printed is almost not there. I have new ink cartridges in it. I have adjusted the print settings. STILL won't print properly. WTH???

    Hm, okay, thanks for getting back to me again!
    Try power cycling the network devices:
    Turn off the printer and computer and unplug the router for 1 minute (do not press any buttons on the router).
    Plug the router back in and wait another minute, next turn on the printer and computer and test print again.
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP psc 950 all-in-one is printing half the page...cuts off the top portion of what I am printing.

    HI!  My HP psc 950 all-in-one is printing half the page....cuts off the top portion of what I am printing.  Not sure what happened to the printer.  Came home one day and the printing wasn't the same.  Possibly the kids could have fiddled with it but no one is owning up to it.    Any solution to get the printer printing normal again?
    Thanks
    -L

    Hi there,
    Could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Hp officejet pro k550 will not print a test page using control keys on the printer.

    How do I print a test page to ensure that this printer is still operational?
     I have tried all instructions for clearing the printer of possible jams, removed and reinserted the print heads, and cleaned the rollers.  When pressing the appropriate keys on the front of the printer, it will not print a test page.  and no error lights appear.
    The printer has been connected to a different computer and ceased working last summer.  The printer would not respond to commands from the computer nor would it respond to keys on the front of the printer itself.  I can get the printhead to move using the controls on the front of the printer, however.  The printer is not currently connected to any computer and the nearest computer does not have the appropriate drivers installed.  Originally the printer was connected to a Dell desktop running Windows XP (sp 3).
    This question was solved.
    View Solution.

    Here's how to print a self-test page from the control panel.  
    I am an HP employee.

  • HP 1350 ALL IN ONE IS PRINTING VERY SLOWLY

    Hello
    My HP 1350 all-in-one printer is printing very slowly. I just printed 7 pages and it took 30 minutes. Can someone help please?

    HI raffo,
    Here is a link to a support document for your printer for slow printing. Just follow the steps in the document and it should hopefully help you. Let us know if this information was helpful or where you are at afterwards.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

  • C5180 All-in-One not printing

    I recently replaced my black ink cartridge and everything seemed to be printing okay but I was getting some streaks and some blank areas. Now, suddednly it isn't printing black at all. Also, when I tried to print a test page, it only printed out the Microsoft logo and nothing else.
    What's going on and how do I fix it?
    This question was solved.
    View Solution.

    Hi - Try the steps in this document.
    Hope that helps.
    Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
    I am an HP employee.

  • HP Officejet 5610 All-in-One not printing true colours

    The HP help people have finally given up on trying to make my Mac see the Color Options tab in their print software with my set-up. They now say, "It's an Apple problem". If I could see these settings I'd be able to adjust the HP defaults for print-outs (by saturation, brightness, density, hue, contrast, etc) once and for all so I'd get closer to what I see on screen printed out in front of me. Without them I have to change everything on a trial and error basis each time in Photoshop. I've read about it in the HP manual and seen it work on another (cheaper) HP printer on a similar Intel iMac but with the All-in-One I just get the screen saying "No User Selectable Settings" - which HP say should not be the case. Anyone have any ideas? This screen seems to be vital - unless of course there's a better way of synchronising the perfect image I see on screen with what I get out of this printer?

    I have seen this case with hp printers on the intel macs as went the intel macs came out hp's driver release was set for June as that is when the intel macs were suppose to be released i know the new software version 7.9 which is universal fixes all of these issues on the intel based macs.
    Just make sure you run the hp uninstaller first HD/Applications/Hewlett Packard
    Here is the link for the lates driver
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?lc=en&cc=us&dlc=en&os=2 19&product=441125&lang=en&softwareitem=mp-40934-1

  • HP Photosmart e-all-in-one NOT PRINTING for MAC 10.9.2

    Hi,
    I have a HP Photosmart e-all-in-one wireless that I have been using for my Apple devices (Mac, iphone, ipad) for years and recently it started giving me problems. 
    First month or so ago, out of nothing the MacBookPro would not see the printer connected, in dispite of been connected to the network. During that time I was able to find it connected from my iphone & ipad. Then I was using to print from these last two.
    Now, not even from my iphone & ipad. It seems that printer does not exist at all, coz it always says "printer not connected" on the MacBook and "No AirPrint Printers Found" on the ipad & iphone. 
    I've noticed that on HP website, the most updated version of the Mac is 10.9 and my devices has 10.9.2 Is this the problem? If so, how can I get by and continue to use the printer? I need to print ASAP.
    Thanks,
    eb

    What router? Have you restarted the router?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Deskjet 3056A E-all-in-one not printing black ink properly

    Hello, I've had my Deskjet 3056A E-all-in-one printer for 2 years and didn't have any problems until about 3 months ago. My black ink cartridge suddenly stopped printing properly. It started to seem like I needed to replace the ink, so I did, but that did not fix the problem. It still seems like the ink level is really, really low sometimes, but it's a brand new cartridge. I couldn't even align the printhead because the black ink wouldn't print. Then I cleaned the printhead and cleaned the ink smear. When the test papers printed after the cleanings the black ink would only print half of the line of letters or numbers, or it was just choppy and faded. I checked the ink levels and it says both of my ink cartridges are almost full still. I was thinking about replacing the cartridge again, but I don't want to waste the money if it won't fix the problem. The color cartridge works completely fine, just to clarify.

    If the black cartridge is in warranty you could contact HP Phone Support
    Although I am an HP employee, I am speaking for myself and not for HP.
    Twitter: @Ciara_B_HP

  • HP C6180 All in One Not Printing on the Network

    I have 3 wireless laptops and an HP C6180 on a wireless network. This week all 3 computers had issues intermittently trying to print. The print job would go to the que, but then it would just be an error and not print. Now today, none of the laptops have been able to print. I tried to connect to the wireless network with the printer an it did find the wifi sometimes and did not other times. (Oh, and it's not about it being too far away, they were right next to eachother). I actually plugged an ethernet cord into it and it did the same thing. So, I assume there may be an issue with the wireless, but I can't print when is wired with an ethernet cable either. I am completely stumped. Been working on this issue for about 5 hours now, and figured I would just post it here. If anyone has any idea what this could be, please let me know.  Also, 2 computers are Vista, 1 is XP. No changes have been made to any of them lately.

    If you can connect with an Ethernet cable, do so and turn off the wireless function of your printer.  Only have one connection method live at any one time or things will get very confusing.
    OK, once you choose your connection method, it will be best if you can set a static IP address for the printer (outside the DHCP range).
    Need help?  Tell me about your router.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • HP 6500 all in one not printing in black and cartridge is full

    my printer suddenly stopped printing in black, all other colors come out fine.  The carriage moves as though it is printing, but the page is blank, where black text should be.  I have cleaned and aligned the print heads several times.  This occurred after an HP tech uninstalled and reinstalled my HP software and drivers.  Prior to this had problems on and off, but it was easy to run print and scan to repair it.  Now print and scan says they find no problem with the printer.

    Hey @Theresalbritt,
    Welcome to the HP Support Forums!
    I understand that you are not able to print in black ink on your HP Officejet 6500 All-in-One Printer. I would like to assist you today with resolving this print quality issue. Thank you for including the troubleshooting steps you have completed prior to reaching out for support. To start troubleshooting I am going to have you print a standalone Print Quality Diagnostics Report from your printer. This report will help us determine if this issue was caused by a software or driver conflict on your computer or a hardware issue on your printer that coincidentally occured when the HP Technical Support agent was working with you. Once we determine if this issue is hardware or software and driver related I will be happy to guide you towards a solution. Please follow the steps below. 
    How to Print Quality Report:
    On the product control panel, press the Setup button () until Print Report displays, and then press OK.
    Press the Right Arrow button () to select Print Quality Report, and then press OK. The report prints.
    If this report prints perfectly: Than the issue that you're experiencing is not hardware related. Rather, there is a driver or software conflict occuring on your computer that is affecting your black print quality. Please do not proceed with troubleshooting at this time.
    If this report prints with quality defects or missing black: Than the quality issue that you're experiencing is being caused by a hardware issue within your printer. This issue may be due to a defective Printhead system. In no way does the computer affect this hardware issue. To resolve this conflict can I please have you click here. Once the support document opens please run through Solution one, Solution five, and Solution six. This includes any sub-steps under the listed Solutions. However, because you note that you have already cleaned the Printhead multiple times do not run a Printhead cleaning again. You do not want to exceed three Printhead cleans if there is no difference in quality because when you clean the Printhead ink is used. If three cleans has not resolved your issue proceeding with additional cleans will just waste ink. Should the black printing issue persist please click here and run Step 7 and Step 8 to manually clean and soak the Printhead mechanism.
    Please respond to this post with the result of your print quality troubleshooting. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • HP 1610 All In One not printing blue

    I lent a friend my 1610 All In One when his printer died, he bought new cartridges and it worked well.  The next day however blue does not print. He uses an older Mac before we run out to buy a new cartridge i wanted to get any suggestions you may have.  I did not have this problem when i was using the printer    

    i am having a similar issue. airport extreme woking properly. hp printer detected and selected to print, status shows that i am connected to printer and i get stuck in the que...

  • HP 4300 All-in-one not printing double sided

    Hello
    Here is my setup. I have a HP 4300 All-in-one printer set up on a network. There are two computers on this network, and XP and a vista. The printer is installed on the XP, and the vista accesses the printer via the LAN network (Wired, not wireless).
    Here's the problem: When, on the vista computer, I try to manually print on both sides, the only option I get in the "Print on both sides" option in properties is "off." However, on the XP I get the option to do it manually. 
    Is there anything I can do to enable the "manual" option on the vista?
    Thanks.

    I'm having the same problem expect with different operating systems and printers. I have a HP Deskjet D1455 that's wired to a laptop with Vista x32. I have another laptop connected to that printer wirelessly that has Windows 7 x64. On the laptop that's connected to the printer, I can print double sided with 4 different options. However, I cannot with my laptop that's connected wirelessly through printer sharing.
    At first, it looks like I can do it but once I select "Manual" it disappears and turns off. Any ideas?

  • HP 6300 ALL IN ONE NOT PRINTING

    MY HP 6300 ALL IN ONE IS CONNETED TO MY AIRPORT EXTREEM. I CAN NOT GET THE PRINTER TO PRINT. THE PRINT DOCUMENT LOADS AND SHOW THE PRINT JOB PRINTING BUT NOTHING HAPPENS. I HAVE THE PRINTER CONNECTED TO THE AIRPORT EXTREEM VIA ETHERNET.
    THE PRINTER WAS CONNECTED TO MY DSL ROUTER PRIOR TO THE AIRPORT EXTEEM AND WORKED EVERY TIME.
    Macbook   Mac OS X (10.4.8)   2G memory upgrade

    i am having a similar issue. airport extreme woking properly. hp printer detected and selected to print, status shows that i am connected to printer and i get stuck in the que...

Maybe you are looking for