Hp 1350 won't print photos with windows 7

Since changing computers to a new one with windows 7, my printer will no tprint photos. It will print documents and web content, but just draws paper through and out blank if I try to print a photo.

I installed it on a dell studio laptop... direct wired..... the PCL6 64 bit universal driver errors out even on the test page
the PCL5 driver prints but instead of text it prints solid black boxes....
NOW WHAT DO I DO....

Similar Messages

Tips for printing photos with HP ePrint

Hello,
I will be giving you guys a couple of tips on how to print photos with HP ePrint. These are general tips to make it a little more easier to use HP ePrint.
#1: Have 4" x 6" photo paper preloaded in your printer
The first step in getting quality photo prints with HP ePrint is having 4" x 6" HP Photo Paper preloaded in your printer’s dedicated photo paper tray. If your HP ePrint-enabled printer doesn’t have a separate photo paper tray, just make sure that photo paper is the only paper loaded in the tray when printing photos.
All photos e-mailed with HP ePrint will print at a default size of 4" x 6".
If available, your photos will automatically print on paper from your printer’s dedicated photo paper tray.
If you don’t have photo paper loaded into your photo paper tray, this message will appear on the printer’s display: “Load paper into photo tray”.
If you have 5" x 7" paper loaded into the tray, it will still print a 4" x 6" photo on the paper, leaving a white border along the top and the side.
HP ePrint will ensure your image is printed with the correct orientation so your photo won’t be cut off.
#2: Make sure your photos have a high enough dpi
Check your image’s dpi: Right-click on your image on your PC’s desktop, then selectProperties, and the Details tab.
The second thing to remember when printing photos with HP ePrint is to make sure your digital images have a high enough resolution, or dpi (dots per inch).
Image files (like jpeg, bmp, tiff, etc.) need to be at least 100 dpi in order to print via HP ePrint.
If you send a photo that is less than 100 dpi, it will not be printed. Instead, you will see a message in your job history on the ePrintCenter that says “Failed”.
To print a photo or image that is less than 100 dpi, insert the image file into a Word document before e-mailing. Your image will be printed on paper from the main printer paper tray.
Image attachments must be less than 5MB (megabytes). Also, HP ePrint supports a maximum of 10 attachments to a single e-mail. E-mails that exceed these limits will not print.
Find out how megapixels affect the resolution and quality of your digital photos.
If you guys have anymore questions let me know.
Also, remember if you find any of my post helpful or want to say thanks make sure to click the white star under my name to give me Kudos.
I really appreciate it!
Thanks!
This question was solved.
View Solution.

I hope this is helpful!
Also, remember if you find any of my post helpful or want to say thanks make sure to click the white star under my name to give me Kudos.
I really appreciate it!
Thanks!

Why doesn't G510n print photos with premium photo paper

I just received the G510n Wireless for Christmas. I tried printing a Photo on Premium Photo Paper and it does not come out. I can't find Photo Ink for this printer. Doesn't this printer have the capability to print Photos on Photo Paper?
This question was solved.
View Solution.

HI Dawn3905,
Yes your printer does have the capability to print photos on photo paper.
I'm not sure what operating system you are using but here is a link that shows how to print using photo paper in Mac OS 10.5 or later.
Also here is a link to your printers manual with instructions on how to print photos in windows as well.
Hope this is helpful.
If I helped you at all it would be great if you clicked the blue kudos star!
If I solved your post please mark it as solved to help others.
I'm a printer tech with HP.

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

Is HP Smart Web Printing compatible with Windows 7 Ultimate 32 bit and Internet Explorer 8 and 9?

HP Smart Web Printing has been replaced with HP Smart Printing. It does support Windows 7 and IE 6 to IE9. See this page for information.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?

Is HP Photosmart Premium all-in-one C309n-s printer compatible with Windows 8.1 PRO?
Operating System: Windows Version 8.1 PRO
When I upgraded from Windows 7 to Windows 8.1, my HP Photosmart Premium all-in-one C309n-s
stop working. Is this printer not compatible with Windows 8.1 PRO? Is there any update for this?

Hey,
HP Photosmart Premium all-in-one C309n/g printer is compatible for Windows 8.1
Please uninstall your printer's old software then install new one for windows 8.1.
HP Photosmart Premium All-in-One C309 Series Full Feature Software and Driver :
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-109711-1&cc=us&dlc=en&lc=en...
Kevin_US_CA
Make it easier for other people to find solutions, by marking my answer “Accept as Solution” if it solves your problem.
***Click on "Thumbs up" button to the left side of my post to say thanks!***

Why won't icloud work with windows vista anymore?

why won't icloud work with windows vista anymore?

I had to re-install after the newly released iTunes - for Vista it does work with iClud 2 - not 3. You can download from this site.

My HP dv4-2045dx won't print wirelessly with my HP Officejet 6500 E709n

My HP Pavillion laptop won't print wirelessly with my HP All In One printer. It will print if it is hooked up, and the printer works wirelessly with my other computer. I've uninstalled the printer and updated the drivers. The print wizard goes through all of the steps to configure wirelessly, finds my printer, tries to connect, and fails at the last minute each time. I believe it may have something to do with the fact that I also can't scan to my laptop.
P.S. It used to print wirelessly. I have no idea what changed.

Yup, here: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-76971-1&cc=us&dlc=en&lc=en&...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can the wireless printer work with window 7?

can the wireless printer work with window 7?

Will this wireless printer connect to the AirPort Express Base Station (AX) via a wireless or USB connection?

Print photos with date stamp on them with a HP 6600

Does anyone know if the HP6600 printer is capable of printing photos with the date stamp on them?

Hello @Joseph_TX ,
Welcome to the HP forums.
I understand that you want to know if a way to configure the HP ePrint.
I would like to help.
Unfortunately there is no way to reconfigure the ePrint.
When you send an email to the printers ePrint address, it will print the body of the email and any attachments.
It will not print the subject line or who the email is from.
Also the ePrint feature will not resize pictures sent.
What you send is what you get.
You can get more control over ePrint with the ePrint app, but I don't believe that will suit your needs.
Please call our Cloud Services at 855-785-2777.
If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Hours:
Mon-Fri. 8am - 11pm, Sat. 9am-8pm - EST
Mon-Fri. 7am - 10pm, Sat. 8am-7pm - CST
Mon-Fri. 6am - 9pm, Sat. 7am-6pm - MST
Mon-Fri. 5am - 8pm, Sat. 6am-5pm - PST
Aardvark1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!

Can imac share photos with windows 7?

Can Imac share photos with windows 7?

Formatting a medium for Windows support is one approach:
https://discussions.apple.com/docs/DOC-3003
Networking options listed by Apple is another:
http://support.apple.com/kb/HT1627
Running Windows and sharing with Windows from the Windows environment is a third:
https://discussions.apple.com/docs/DOC-2741

How to share 10.6 OSX Server print queue with Windows 7 successfully?

I used Bonjour Print Services for a Windows 7 machine (http://support.apple.com/kb/dl999) to successfully connect to a Mac OX Server 10.6 print queue, and the following message is generated in the print log and CUPS log,
"POST/printers/stormoncecar/ HTTP/ 1.1" 200 2205 Print-Job Successful-OK
There are no errors, however, nothing comes out of the printer. It works for all the Mac OS Client machines, but not for any of the Windows 7 machines.
How to share print queue with Windows 7 successfully?

I'm back on this problem. I thought I would give more details as I still can't print.
Operating System: 10.6.8
Driver for Canon LBP6750 UFRII prints from Mac and prints from Windows 7. However, printing from Windows 7 as you share the printer from your Mac does not print out anything and has no errors.
JOB INFO
Completed smbprn.00000004 Microsoft Word - Document 1 3:43PM Today 3:43PM Name
CUPS > access_log
localhost - - [01/Feb/2012:15:43:33 +0900] "POST /printers/FLOOD_6750_UFR HTTP/1.1" 401 2003 Print-Job successful-ok
localhost - lino [01/Feb/2012:15:43:33 +0900] "POST /printers/FLOOD_6750_UFR HTTP/1.1" 200 2003 Print-Job successful-ok
CONSOLE MESSAGES
2/1/12 3:47:45 PM com.apple.launchd.peruser.501[
200] (jp.co.canon.UFR2.BackGrounder[664]) posix_spawn("/Library/Printers/Canon/UFR2/Utilities/UFR II BackGrounder.app/Contents/MacOS/UFR II BackGrounder", ...): No such file or directory

MF imageclass 4350 (black &white laser printer) compatible with WINDOWS 8.1?

MF imageclass 4350 (black &white laser printer) compatible with WINDOWS 8.1? WINDOWS 8.1 recognizes I have printer attached, but it says flatly "No driver!" I have run all the drivers from CANON and then attached the printer. But, still it doesn't work! Nothing from CANON sez" SETUP...........

Hi mybrojer.
I will be glad to assist you.
The file that you download from the Canon website is .ZIP file. When you select [RUN], it unpacks the setup folder. Please disconnect the printer from the computer and follow the instructions below to install the printer:
Open your [Downloads] folder.
You will see two icons with the name: MF4350_MFDrivers_W64_us_EN.exe. Double-click on the yellow folder icon with this name.
In the folder you will see two listings for [Setup]. Double-click on the [Setup] that has the type as [Application].
The "MF Drivers Setup Wizard" will open. Proceed through the steps and restart the computer.
After restarting the computer, connect the USB cable and allow the installation to complete.
Print a document.
I hope that this information is helpful to you. Should the error persist, or your need further assistance, please contact us at 1-800-OK-CANON (1-800-652-2666).
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Photosmart Printing Issues with Windows 7 RC

Good afternoon. I've tried to search for this but was unable to find anything on our specific issue unfortunately. I've got a Photosmart C4180 and it came with HP Photosmart Premium software. While this is fine on XP, the disc is XP only. You cannot change compatibility mode of the file on the CD to XP. I have not had the chance to try copying the CD to the HDD and changing it there (would that work?).
As a result, I've been using Windows 7 RC and Photosmart software that you can download for Vista x64 with very little success using Vista compatibility mode (I've tried both SP1 & SP2). It will install and run, but when attempting to print with it, it is ruining prints and thus costing us money. I've got to go back to XP to print anything and that's of course less than preferable.
The problems: When printing borderless, it skews the photo (rotates it a degree or two) and produces white space in two corners with a crooked photograph. When attempting to print with borders, it stops printing 2/3 of the way through the photo...I guess it thinks the bottom border is supposed to be HUGE. So, unfortunately, compatibility mode is a non-starter and doesn't allow proper printing of photos.
If anyone has any suggestions on fixing those problems, I'll happily try them. Using the older version of Photosmart in WinXP does not have these issues.
While speaking of Win7, does anyone know when HP plans on releasing software that will work properly for it? The time is nigh. RTM has already come and gone with retail to follow on October 22nd. Is there a beta that users can test or sign up for? I'd be more than willing to be a guinea pig, just let me know what needs to be done.
My wife is set in her ways and absolutely must use Photosmart to print photos. It would be very sad if we had a brand new copy of Win7 (pre-ordered) sitting there, waiting on HP to release software that is usable with it.
Thanks for any help you can provide!
Message Edited by hokiealumnus on 08-18-2009 08:27 AM

Good afternoon. I've tried to search for this but was unable to find anything on our specific issue unfortunately. I've got a Photosmart C4180 and it came with HP Photosmart Premium software. While this is fine on XP, the disc is XP only. You cannot change compatibility mode of the file on the CD to XP. I have not had the chance to try copying the CD to the HDD and changing it there (would that work?).
As a result, I've been using Windows 7 RC and Photosmart software that you can download for Vista x64 with very little success using Vista compatibility mode (I've tried both SP1 & SP2). It will install and run, but when attempting to print with it, it is ruining prints and thus costing us money. I've got to go back to XP to print anything and that's of course less than preferable.
The problems: When printing borderless, it skews the photo (rotates it a degree or two) and produces white space in two corners with a crooked photograph. When attempting to print with borders, it stops printing 2/3 of the way through the photo...I guess it thinks the bottom border is supposed to be HUGE. So, unfortunately, compatibility mode is a non-starter and doesn't allow proper printing of photos.
If anyone has any suggestions on fixing those problems, I'll happily try them. Using the older version of Photosmart in WinXP does not have these issues.
While speaking of Win7, does anyone know when HP plans on releasing software that will work properly for it? The time is nigh. RTM has already come and gone with retail to follow on October 22nd. Is there a beta that users can test or sign up for? I'd be more than willing to be a guinea pig, just let me know what needs to be done.
My wife is set in her ways and absolutely must use Photosmart to print photos. It would be very sad if we had a brand new copy of Win7 (pre-ordered) sitting there, waiting on HP to release software that is usable with it.
Thanks for any help you can provide!
Message Edited by hokiealumnus on 08-18-2009 08:27 AM

HP5640 All-in-one does not print photos from Windows Live Photo Gallery

Setup printer using mobile device Installed print driver using provided CD. Updated driver software. Printer is networked by wireless to computer & smartphone.Was able to print photo from smartphone, was able to print Word document from computer. Was unable to print photo from computer using Windows Live Photo Gallery. Used the HP troubleshooter, following all possible solutions to no avail. Selected the option of HP Photo Paper but it defaulted to the 8x11 paper tray. Can someone please help? Thank you!

Hey , Welcome to the HP Support Forums!
I understand that you're experiencing issues when printing from Windows Live Photo Gallery on your Windows 8 computer to your HP ENVY 5640 e-All-in-One Printer, as your prints continue to default to the letter size Paper Tray. I would like to assist you today with resolving this printing issue. Can I please have you follow the steps below to properly configure your print settings under the Print dialogue window in Windows Live Photo Gallery. 1. Load your Photo Paper in the Photo Tray on your printer 2. Open an image you would like to print under Windows Live Photo Gallery 3. Click on File and select Print 4. Under the Print dialogue window please ensure that your printer, Paper Size, Quality, and Paper Type are all set properly for your specific print job 5. Next, click on the Options button on the bottom right hand corner. Under the Print Settings dialogue box click Printer Properties. 6. Next, change the Paper Source to Photo Tray. If it currently is set to 'Main Tray' please click the Main Tray option and it will drop down to allow you to select Photo Tray. Click OK once the Tray change has been made. NOTE: If the Paper Size shows an exclamation mark, it means that your Photo Tray does not support the Paper Size selected. Click the dropdown next to Paper Size and choose a size that does not show an exclamation mark. 7. Under the main Print dialogue window click Print on the bottom right Your document should print as per normal now from the proper Paper Tray. Please let me know if the steps provided resolve your Paper Tray photo printing issue. I look forward to hearing from you. Good luck!

Printing photos with captions

In a photo album I've put a caption into the Description box of each picture. I haven't been able to figure out how to print the photos with the caption beneath each picture. I can make a web page with the text in the Description box beneath each picture so surely there is a way to do it with printing. My goal is to print the sheets of a simple photo album -- two 4x6 pictures per sheet with the Description text below each picture. Can you help?

If you want the captions beneath the photo then use the Contact Sheet theme in the Customize section of the print window. In the Settings page you can check the Comments box to have the comments printed under each photo.
Click to view full size
You'll have the option as to how many columns to have per page which determine how many photos will be per page.
Click to view full size
OT
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier versions) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. There are versions that are compatible with iPhoto 5, 6, 7 and 8 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
NOTE: The new rebuild option in iPhoto 09 (v. 8.0.2), Rebuild the iPhoto Library Database from automatic backup" makes this tip obsolete.

Hp 1350 won't print photos with windows 7

Similar Messages

Maybe you are looking for