»HP 14-d008au Notebook PC drivers not found. wifi device not working on ws 8.1

recently I install windows 8.1 but unfortunatly I couldn't found my drivers on hp s website. my bluetooth and wifi system is not working. pls help me

Hi:
HP is aware of the drivers missing from the support pages issue and is working on resolving it.
It is affecting hundreds of notebook models.
Since I don't work for HP, I do not know when the sites will be operational again.
This has happened once before, so hopefully they learned from past experience how to troubleshoot the problem.
With the Thanksgiving holiday in the United States, that has delayed things, I'm sure.
We are on the fourth day of this problem.
Please take the following steps so I can figure out what model wireless card your notebook uses...
Go to the device manager and click on the Network Controller needing drivers.
Then click on the Details tab at the top of the network controller window.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that list and select the third item (Hardware ID's).
Post the top string of characters you see in the window that start with PCI\VEN:

Similar Messages

My pavillion g6 notebook fan is not working how do i fix it?

My pavillion g6 notebook fan is not working how do i fix it?
i found out a few days ago when i was not hearing the sound my fan usually does because its really loud
and then 1 day i got the message. and is there a way to make it quiet?

Hey FlowZ,
Here is the Manual that shows you how to remove all the replaceable part in the notebook. Go to page 73 where it tells you the part #'s for the fans depending on what your processor is.
Now, i wouldn't advise you to remove it yourself.
But these are the steps to remove the Fan.
1. Turn the system board right-side up, with the front toward you.
2. Disconnect the fan cable from the system board (1).
3. Remove the Phillips 3.0 x 2.0 screw (2) that secures the fan/heat sink assembly to the system
board.
4. Follow the sequence embossed on heat sink to loosen the six Phillips 10.0 x 2.0 captive screws
(3) that secure the fan/heat sink assembly to the system board.
If you want to replace the fan just go to Hp PartSurfer and search by your product #.
Here is a Document that will help you with Reducing Heat inside the PC.
Also,Reducing Fan Noise.
THX

Amd video drivers not working after win 10 upgrade

AMD video drivers not working after win 10 install. running on microsoft basic driver, call hp smartfriend assistance. appearently there is a fix but hp will not help unless i pay 100.00$ US because the warranty has expired on my notebook.Have a pavilion dv7 was running AMD Mobility Radeon HD5000 series. Thank you hp will not be purchasing an hp product again. Alienware here i come.

Not much we can do since your model is not supported by Toshiba for Win 10 upgrade according to THIS list so there is no Win 10 driver for your TouchPad. That button, however, is not the only way to disable/enable the TouchPad. FN+F9 does it and you can fix it where, when you plug in an external mouse, it will automatically be disabled.

HP Pavilion g6 Notebook PC - Keyboard not working

HP Pavilion g6 Notebook PC - Keyboard not working
My Windows 8 - 64 bit laptop keyboard stopped working. I tried to uninstall and reinstall as explained in the support pages. but doesn't seem to work. Is it dead? what is the solution. Please help
Thank you

Hi,
While this could be a hardware issue, it's always worth trying the following.
Open windows Control Panel, open Device Manager, expand Keyboards, right click the entry 'Standard PS/2 Keyboard' and select Uninstall.
Shutdown the notebook.
Then unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Note: If the keyboard doesn't work when trying to access or navigate the Bios Menu, then this is probably a hardware fault.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

U330 Windows 7 Drivers Not Working

Hello,
I have recently been in the process of updating all of my drivers on my u330-2267EU to the latest Windows 7 versions. I had been waiting for this update to the drivers site for some time since I was able to get Windows 7 installed before the Oct 22nd release. I am running Windows 7 64bit and I am running into some trouble with these newest drivers not working correctly.
u330 Driver Download Site (Using Win 7 64bit Versions): http://consumersupport.lenovo.com/en/DriversDownloads/drivers_list.aspx?CategoryID=16
Switchable Graphics: there are 2 new Windows 7 drivers related to video that I downloaded. One referring to the discrete ATI graphics card, and the other to the Intel Graphics Media Accelerator. After installing both of these, setting BIOS for Switchable Graphics, and running the Switchable Graphics program from the desktop after bootup, brings up the desired menu with the option to switch from power saving gpu to the high performance gpu. When I click the "high performance gpu" button, the screen flickers and fades to black momentarily as it should, but when the screen returns and after waiting for a few minutes no switch is made, it just stays in the powersaving gpu. Suggestions?
Power Management Software: I also downloaded Lenovo's Energy Management Windows 7 driver for the u330. After installing the software I was initially able to bring up the menu to change power options, but the options that I chose would not make any apparent changes. Actually, after installing the program, it made my screen incapable of changing its brightness using the "function + arrow" button combination. Also, no longer when i change my default power windows power options will it adjust my screen brightness. It just stays the same no matter what. The only way that I can now change the brightness of my screen is by going into the graphics settings of the Intel GMA and change the settings there, but that is a completely horrible way of having to do that.
So there you have it, after all this waiting I still dont have the ability to utilize the switchable graphics nor properly use the Lenovo Power Management software. Oh yea, and I still cant adjust the brightness of my screen. I have re-downloaded and re-installed these drivers many times to try to get them to work correctly, but so far no luck.
I would greatly appreciate any help on the subject or at least have the knowledge that someone at Lenovo has noticed these problems and a fix is coming soon
thanks!
Solved!
Go to Solution.

check out our thread here
http://forums.lenovo.com/t5/Windows-7-Launch/U330-Windows-7-Drivers-Problem-amp-Solutions/td-p/16716...

HP Pavilion 15-e092se Notebook PC keyboard not working

HP Pavilion 15-e092se Notebook PC keyboard not working . win 8.1.

Hi Nits007,
Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion 15-e092se Notebook and keyboard issues. Here is a link to uninstall the keyboard. Restart the computer after uninstalling, it should reinstall automatically.
Hope this helps you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

HP drivers not working for Windows 8.1

Hi,
I've been given this laptop and it came pre-installed with Windows 8, touch screen and every driver works fine on Windows 8 till I've upgraded it to Windows 8.1, touch screen no longer works installed the latest driver from the HP website and the own built in HP support assistant and verified it works for 8.1 and it still does not work. Any help would be much appreciated.
Regards.

Hi there @DuskHunter
Welcome to the HP Support Forums!
I understand that you updated to windows 8.1 , and now some devices are not working correctly. You did not specify the exact product you have , but I did find the support page for the closely related 14-n033tx, so you can give the drivers there a try.
HP Pavilion TouchSmart 14-n033tx Ultrabook Drivers
If not, then please post the full product number for your notebook. See the following, if you need help in finding that.
How Do I Find My Model Number or Product Number?
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Sound & Graphics Drivers not working for Qosmio F15R

I was granted this Laptop with nothing more than AC Adapter. I didn't need the information contained in it and didn't want to deal with its configuration issues either, so I started planning formatting it. Looking for model number label at the bottom found it says "Qosmio F15R". I couldn't found this model number at support website for drivers, closest model was F-15AV201, figured it out by watching its pictures in detailed specs documentation. Everything but Bluetooth seemed to be available, so I formatted and reinstalled Windows XP Pro SP3 and then downloaded all drivers. Touchpad, Ethernet, Wireless, Flash memory, TV-FM and DVD-RAM worked just fine. On the other hand Sound, Display and Modem didn't work at all.
While installing Sound driver I got this error message:
http://img21.imageshack.us/img21/5075/sounddriver.png
(it says: "couldn't find driver, reboot and reinstall")
After installing Display driver checked display adapter properties and found this:
http://img402.imageshack.us/img402/5171/vga.png
(no information available and even scrolling on web browser is crappy)
After installing Modem driver realized it was not identified:
http://img237.imageshack.us/img237/4613/devicemanager.png
(Sound, Display, unknown device, Modem)
I thought I was using drivers for wrong model, so I downloaded PC Wizard, a freeware that identifies hardware configuration:
http://img262.imageshack.us/img262/6452/pcwizard.png
wich gave me chipset, processor, video card and-
http://img175.imageshack.us/img175/4121/soundr.png
-sound card: 82801FB ICH6 AC'97.
I couldn't find any proper driver nor for sound nor display, so I tried a shareware, Everest:
http://img337.imageshack.us/img337/6199/everesth.png
wich showed me the same chipset, video card and sound card model numbers than PC Wizard.
I realized that chipset, and display model didn't match detailed specs documentation. I thought that hardware was not working properly, so I downloaded and installed a Linux distro (Kubuntu 9.10 RC i386), and fount out that display and sound were working just fine but I need it to work properly with Windows XP.
Can anyone tell me where can I get sound and display drivers (and even Bluetooth if possible) for this laptop? Thanks in advance. Regards.

I have the same problem with audio driver. I can send you the graphic driver that works with Qosmio F15R if you need. My email: [email protected] Toshiba is so bad in supporting with their products.

2011 MBP with Win7 on BC and numerous drivers not working

I'm working on a tech project and have run into a problem that i can't fix. <grr> I followed the Apple directions for installing a second OS on Boot Camp and found some good tips from other online walk throughs, but am still having a problem with a number of the drivers.
I have a 2011 MacBook Pro 13" with the most up to date version of Snow Leopard. I have installed Boot Camp and Windows 7 Pro on a 50 Gb partition. I have installed Windows 7 and activated it. Once Win7 was up and running I updated the Boot Camp drivers with 3.2.0, the latest version that I know about. Initially I had no recognition of either the wired or wireless controllers even after the Boot Camp 3.2. I was able to determine that I had a Broadcom wired ethernet card and found the driver and installed it via USB so that I could use Win7 to access the internet.
The drivers that, as found from the Device Manager, are not working are as follows:
Network Controller - Wireless
PCI Simple Communication Controller
SM Bus Controller
High Definition Audio
Apple Keyboard -> Bluetooth USB Host Controller (though the USB ports are active and operational)
Facetime HD Camera (1 of 2 not working)
I have been able to use the wired internet to download and install all of the available Win7 updates, but nothing can be found on the above drivers. I even manually installed the drivers for each of these components from the Snow Leopard disk for Boot Camp and they would not install.
From all the information that I can find on the Win7 Boot Camp install, nothing more recent than early 2010, everyone seems to have everything just install and work. I have not seen anything from anyone about the wireless and wired network cards not working or any of the other issues that I'm having. The majority of the issues were with the optical audio LED staying on or some other more trivial issue.
Anything you can suggest would be great so that I can use the internet in Win7. The rest of the drivers are second to getting on wireless.
Thanks in advance for your help. If you have any more detailed questions please let me know and I'll get answers back.

I have a 15" MacBook Pro, built July 2011. It came automatically with Lion. No OS X disc provided in box with Lion, due to it being a download only OS.
I followed the boot camp process to partition the hard drive and format the appropriate partition, to then install Windows 7 Pro Upgrade (clean install - works fine). Just like the original post, the following drivers that will not install properly include:
- trackpad
- keyboard
Even when trying to re-install the drivers again manually off the boot camp disc, a window pops up to stating that the drivers may not have installed properly and gives you the options to either re-install the drivers 'using the compatability settings', or 'no the drivers installed ok'.
It's almost like it thinks Windows 7 is an old program....weird.
The keyboard and trackpad is missing from the Boot Camp control panel, so I can't change the settings for the keyboard and trackpad, to get them functioning the way they're meant to - like it does in Mac OS X.
I thought that this page would help: http://www.reviewmylife.co.uk/blog/2010/06/08/windows-7-on-macbook-pro/ but no it didn't. The boot camp control panel screen dumps shown in this link, looks nothing like mine, due to the fact that the drivers refuse to install properly.
I have spent hours trawling many mac and windows forums with not luck.
Anyone with a MBP running Lion OS and Windows 7 Pro have these issues?
Does anyone have a solution?

Realtek AC97 Audio Drivers Not Working!

Hi.
I recently had a HD crash and I was forced to format it. I installed everything just as the first time, and everything worked fine except the audio drivers. The problem is, it does actually install the drivers, but when I look at Sound Options or Device Manager there are no drivers for the soundcard. It says installation is complete and then I restart the computer, and when I try to update with MSI Live Monitor 3, it says I got the latest drivers installed. STILL doesnt work.
Does anyone have a hint about the problem? Any virus? On another note Norton discovered viruses on my computer, even though I had installed the antivirus-software before connecting to internet\network. This is what it found:
W32.Randex.gen - msconfg.exe
W32.Spybot.Worm - vsmon.exe
And some adware.
In virus description it says the viruses can come with programs but I have only installed a few programs, and it says it will spread through IRC. I have 2 other computers in my network, but I dont know if they have anything to do about it. The program will not work correctly whitch is infected with this virus, so maybe there is a chance Live Monitor got it and somehow cant get the sound working... probably not, but this is all i can give.
Tried to reformat another time but still same problem... motherboard broken??

Quote
motherboard broken??
Possibly. One way to try is see if it works fine with different os'es. If you can download knoppix's latest version (which I hope supports the onboard audio, like my new fedora linux does) and try it, then you can find out if the sound works or not.
Knoppix is a kind of special linux that you don't have to install, it just runs off of a cd.
On another note, I find that if I run live update, or open live monitor and search for new drivers, my sound is cut off whether I update or not till the next reboot.

Presario R4000 Laptop Audio Drivers not working

So, I've got this older Laptop, the Compaq Presario R4000.
It was giving me a really hard time with software with the original OS and stuff, so I decided to format it and install my own Windows XP Professional on it, as opposed to the Compaq-ware filled XP Home that was already on it.
So I formatted, installed Windows, and found the driver page for it.
I Flashed the BIOS despite the fact that I don't think it was necessary, but I wasn't sure.
I installed the graphics drivers no problem.
Installed the wireless device drivers, though not sure if these are working, but it's not significant.
What is significant however, is that the Audio Drivers provided on the site do not work at all. I looked for other drivers, looked for other driver versions for the OSs and various other Presario models, but nothing has worked.
I don't know what the problem is. I'm really hoping someone is able to help!
Thanks in advance.
Error Message:
BTW, I should mention what the error message I'm getting is.
A command window pops up running the following command:
c:\swsetup\SP29873>start /min \swsetup\audio\setup.exe /s
I tried fiddling with the batch file that was running these commands to see if that would help, but it doesn't.
Still always get the same error message:
"Windows cannot find '\swsetup\audio\setup.exe'. Make sure you typed the name correctly, and then try again. To search for a file, click the Start button, and then click Search."

I have the same error message, have you figured it out yet? If yes, please tell me what you did <text deleted> Thanks
Message Edited by WendyM on 09-07-2009 08:48 AM

Brand new HP Beats Special Edition 15-p030nr Notebook PC , Audio not working correctly

Just bought this computer for me 9/30/14. Volume is at 100% and while there is some sound, you can barely hear it. I have checked drivers, device manager etc and nothing seems to change it. I need to know if this is a defect in the system or if there is something else I can do. I hate to think we paid all this money for the computer, one reason being the Beats audio, and have it not work. I will return it if I cannot get it working.

Hi @Twright2014
Welcome to the HP Support Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I see your having some sound issues with your new notebook. I will be happy to help you with this. How does the audio sound when you use a set of headphones? Try the troubleshooting steps in this HP document No Sound from Speakers which includes using the built-in Windows troubleshooter.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

LAPTOP dv2700 notebook PC speakers not working

Hello,
I am having dv 2700 entertainment notebook PC. My laptop speakers are not working. Sound drivers are installed. When I connect to earphone I am able to hear sound but when I am not using that earphones, Sound is not coming. I think the problem is with Laptop speakers. Can you suggest any trouble shooting for this problem. I bought this laptop in 25/10/2008.
manohar

i'm having the same problem with my dv2000. it all happened when i did an update on my laptop. the hardware is fine, it's the software. currrently only my earphones work, but if i wanted to use the built in speakers, all i have to do is go into: control panel, hardware and sound, device manager, sound video and game, "double click" conexant high...., driver, roll back driver.
it'll all happen again (built-in speaker go dead and only earphones work) once i agree to another windows update.
ps. when the built-in speakers work, the earphones don't work. So it's always one or the other. i've been just using an external speaker lately. But if some knows a fix, please send me a message. much appreciated.
thanks

Notebook mouse pad not working

My notebook is relatively new and the mouse pad was working for the first 2 months. After 2 months it stopped working and when I tried to reinstall the drivers it still didn't work. Any solutions?

Hi @NightFury108
Welcome to the HP Support Forums!
I understand that your mouse has stopped working, and that you have tried reinstalling drivers. I am happy to assist.
Did you notice any problems prior to it failing to work?
I realize that you have tried reinstalling drivers, but have you also tried a system restore? If not see the following and look for a restore point from before when the problem started. It is always possible the cause is more related to some other software that was updated or something similar that is interfering with the touchpad.
Using Microsoft System Restore (Windows 8)
Also you should take a look at this, most likely Troubleshooting when TouchPad does not work in Windows 8
Using and Troubleshooting the TouchPad or ClickPad (Windows 8)
Let me know whether that helps or not.
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

Network controller, pci device, wifi drivers not working

my device model is dv6-6121tx
i am not able to install network controller and PCI device drivers...
also my wifi is not working..
no wireless adapter in device manager..
please help...
This question was solved.
View Solution.

Hello again samyak. You are very welcome!
The first device (the virtual adapter) is virtual network which allows you to use the computer as a "software router." Unless you're using this PC as an Access Point this device is useless to you. This article has more information on the service. Your best bet is to just disable it. Try the following.
Click Start, go to "All Programs," and select "Accessories."
Right click on "Command Prompt" and select "Run as Administrator."
Type the command "netsh wlan set hostednetwork [mode=disallow] and press Enter. This should disable the virtual adapter.
Exit Command Prompt, reboot the computer, and verify that the device is no longer listed.
The device with the "ACPI/HPQ0004" ID actually returned two results. The first was the Quick Launch Button software. The other was related to Hard Drive Protection. Try this driver.
Make sure to reboot after all of these instructions have been completed. Then go back to Device Manager and verify whether everything looks as it should.
Continue to have a great day!
Please click the white star under my name to give me Kudos as a way to say "Thanks!"
Click the "Accept as Solution" button if I resolve your issue.

»HP 14-d008au Notebook PC drivers not found. wifi device not working on ws 8.1

Similar Messages

Maybe you are looking for