HP 14-d017AU: Issues with Webcam, Network, Ethernet, VGA and PCI Device drivers

I downgraded my new HP 14-d017AU to Windows 7, 64-bit. Since then I have not been able to find drivers for Webcam, Network, Ethernet, VGA and PCI Device. The Hardware IDs are as follows: Ethernet Controller: PCI\VEN_10EC&DEV_8136&SUBSYS_2191103C&REV_07Network Controller: PCI\VEN_168C&DEV_0036&SUBSYS_217F103C&REV_01PCI Device: PCI\VEN_10EC&DEV_5229&SUBSYS_2191103C&REV_01Universal Serial Bus (USB) Controller: PCI\VEN_1022&DEV_7814&SUBSYS_2191103C&REV_01Standard VGA Graphics Adapter: PCI\VEN_1002&DEV_9834&SUBSYS_2191103C&REV_00I will be grateful for your assistance.

Hi: See if this works... Graphics: Install and reboot. http://support.amd.com/en-us/download/mobile?os=Windows%207%20-%2064 USB 3: Install both of these and reboot. http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_137148_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_133037_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken Wireless: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3DswItem%253Dob_128686_1&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken PCI dev: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_133237_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken Ethernet Controller: http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=6943836&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_133348_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken Webcam: (won't work until the graphics driver is properly installed). http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-131219-1&cc=us&dlc=en&lc=en&os=4158&product=6825117&sw_lang=

Similar Messages

Problems with Ethernet controller and PCI device driver on Satellite L30-10X

Hellow!
Sorry for my bad English, I'm from Russia.
Just few days ago I bought Satellite L30-10X with W Vista on board. My opinion, that this OS does't very good on this computer, so I install W XP.
I have some problems with drivers. At first, I dont know what model I have:PSL30 or PSL33? I download all drivers for both models. But, after installation, computer doen't find drivers for Ethernet controller and PCI device...

Hi
Satellite L30-10X belongs to the PSL33E series. This number can be found on the label placed on the bottom of the unit!
You have to choose this number from the driver download form to get the compatible XP drivers.
I dont know why you are not able to install the LAN driver. Ive got the same notebook with Vista and Ive installed the XP and all drivers run fine.
I assume you have installed the drivers in wrong order. Please take the look in the Toshiba installation instruction txt file. In this order you have to install the driver! Its important.
I think you should install the XP again to ensure the clean registry and then download and install the compatible XP drivers like mentioned in the installation instruction file.
Good luck

Anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find my provider. I swapped SIMs with another iPhone 4 on ios 4 to confirm device problem.

Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.

Does the device get any signal?
Sounds like the device may have had a hardware failure. If it is out of warranty, the only option is the Out of Warranty replacement.
AppleCare is only an option if it is still under the original warranty.

Image Ultra Builder 3.x issue with T61 Network Driver load

Hello,
I am having issues with a Network deployment of an image on a T61 (7659-12U) During the intial boot up phase with the Network Boot disk that was created from IUB, I receive and error 1231 - The Network Location cannot be reached.. I am currently using IUB for deployment of A31, T40/42 as well as the T60 model line. None of these loads are having the problem.
Any help on this would be very much appreciated.
Thank-you in advance.
Ed

Hi,
IUB 4.01 is using WINPE 2.0<Vista based> and IUB 3.1 was using WINPE 1.0/1.1<XP Based>.
This has nothing to do with the actual image deployment. It's just that the WINPE looks more like
Vista. And this is why the method changed after you updated from 3.0/3.1 to 4.00/4.01.
To answer your questions from before:
1) Does updating IUB to version 4.01 still allow me to deploy Windows XP ?
Yes, it's still supported and possible.
2) Where on the boot CD should the new driver files be located. I took this to be PREBOOT\DRIVERS ?
As the new IUB is using WINPE 2.0, the best location for the NIC drivers is the file :
tvtos\winpe.wim
However, this is my advice.!
For my Image deployment I'm no longer using the CD for network deployment. I'm using USB key which gives me more options for the image deployment and the automatization of the deployment process.
However, if you want to use CD for network deployment, then you can do it in following way.
!!!NOTE: this is not the offical way, nor the supported way, but trust me, that it's working like charm !!!
- go to your repository location %repositorylocation%\modules
- find the file called "Z633003A.TVT" and open it using your fav zip application
- after you open this file, go to following location: tvtos\
- extract the "winpe.wim" and using WAIK unmount this file and add the NIC drivers into this .wim file
- after all the drivers are in the winpe.wim file, just copy it back to the "Z633003A.TVT" file and create a new Deployment CD
How to add NIC driver using WAIK:
This is prety easy step, but for more info, check following link:
http://www.svrops.com/svrops/articles/winvistape2.htm
As I described earlier, I'm using USB key for Network image deployment, so I have not done it this way, but I have done it a bit simplier.
Here are my steps:
- created a Distribution USB key <suing the same method, that you are using when you create a Network deployment CD, but instead of a CD I select my USB key>
- once the USB key was created successfully I unmount the "tvtos\winpe.wim" file and add all the NIC dirvers into it
This is all that I have done.
Yes, of course there are couple other steps, that I do, like modifying the BCD file, adding other WINPE files, diagnostics and other deployment tools, however, this is not realy a part of IUB, I'm using it for my WDS server and other deployment tools, that I need to use. If you know, what I mean, then you surely understand, that it's a live safer to have everything on one USB key, then on multiple CD where I need to search throught all of then to find the correct CD.
Let me know, whether this method is more suitable for you.
As described above, this is not the realy official/supported way, but it's working for sure.
Rgrds

Complaint: Issue with the Network

Facing issue with the Network for most of the time and sometimes even Data for both 3G and 2G.
My service provider was BSNL, Hyderabad, AP, India-50016
I have check even with my service provider from there they don't have any issue..
But the same works with my old BB8520 and others.
Please can you help me?
BBZ3-STJ100-1 OS V10.2.1.3247

Is it h+ or H+?
I've had similar issues when my sim card was bad. I had cut it down to micro sim size and it worked fine for a month. Then it stopped working in the Z10 but worked in my 9810. Try having your carrier replace your sim card.
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

OSX 10.9.1 Compatibility issue with Sharp Aquos PN-L702B and PN-L802B

I have Mac Mini's connected to the Sharp Aquos PN-L702B and PN-L802B touch screens and after updating to 10.9.1 am experiencing what appears to be a compatibility issue with the Sharp TPM driver and the OSX 10.9.1.
Everything works perfectly previously on 10.8.4 and 10.8.5. I did not test on 10.9.0 as I went straight to 10.9.1. Anyone else having this problem? Any thoughts on resolution?

OK so perserverance seems to have helped here - i used the cmd R function on start up to get to the page where i can re install OS X Lion - Safari now working.
However i have Office 2011 for MAC and now Excel wont start so i will post on another thread for help with this
Hope this helps if anyone has a similar issue

Issue with Acrobat 10.1.2 and Windows 7 64-bit Preview Handler

Hi. I work in an enterprise environment that is currently migrating to 64-bit Windows 7. The only version of Acrobat we have approved for Windows 7 is 10.1.2. We're seeing an issue with this version that causes the preview handler to not work. The preview panel in Explorer is just white and will eventually give the error "Preview handler surrogate host has stopped working." I've tried to fix listed on http://www.pretentiousname.com/adobe_pdf_x64_fix/index.html but that registry key is already correct. Our current work around for these users to just install Reader X1 and make it the default PDF handler, but I would like to find a better solution. Is there a known issue with Acrobat 10.1.2 and 64-bit operating systems? Or is there a way to change just the default preview handler?

Most of the info on the web page you link to is 2-4 years old. I doubt it applies. Your workaround is actually the best solution: It's always preferred to use the latest PDF viewer. Reader and Acrobat can exist on the same machine.
Also, why 10.1.2? There have been 6 releases since then with documented security enhancements (meaning there are also published vulnerabilities which are patched), bug fixesm, and feature enhancments.
I'll ping some folks about the error you are getting. . .
hth,
Ben

Firefox is not campatible with F5 Networks Host Plugin and I need it to run a remote website

Firefox is not compatible with F5 Networks Host Plugin and I need it to run a remote website

Do these hotfixes help you? http://support.f5.com/kb/en-us/solutions/public/12000/700/sol12757.html

Are there any issues with using OS X Mavericks and Premiere CC?

Are there any issues with using OS X Mavericks and Premiere CC?

Official statement: http://blogs.adobe.com/premierepro/2013/10/premiere-pro-and-mac-os-x-10-9-mavericks.html
Peter Garaway
Adobe
Premiere Pro

Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows

Here's some information on an issue that we've identified with Matrox products and Encore CS5.1:
"Issue with Adobe Encore CS5.1 and Matrox MAX H.264 encoding on Windows"

Still flickering on Encore even when rendered in MPEG-2 DVD in Pemiere Pro CS5.5. Looks perfect in Premiere Pro.
Any other ideas?
EDIT: Was looking for Google for people with similar problems to me and I came across this http://forums.adobe.com/message/3959757?tstart=0
I am currently re-rendering the video in PAL DV Widescreen MPEG-2 DVD and using maximum render quality.

Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks? Don't want to download Yosemite. Not hearing good things about it.

Are there ANY compatibility issues with Itunes 12.0.1 and Mavericks? Don't want to download Yosemite. Not hearing good things about it. I'm on Mavericks 10.9.5.

one obstacle, quickly removed. thank you.
nomenclature aside for a moment, 10.6.8 is correct but maybe more is necessary about the MacBook Pro: it is 'old': Identifier: 1.2, Intel Core Duo, 2.16 GHz, 1 Processor, L2 2 MB, RAM 2 GB.
i hope that is enough to get an answer to this: is it unadvisable to update its OS; in other words, if i update to 10.9, will the machine be able to handle it, 'speedwise'?

I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

I have Calendar v 7.0 and Entourage 12.3.6 2008 on OS X 10.9.2. I cannot import Entourage events into Calendar - this was never an issue with iCal. Whats happened and how can I import details into Calendar or do I need iCal back?

adamboettiger wrote:
Sophos and MacKeeper
There are many reported problems with both these programs.
Run through this list of fixes in order, will tune you right up.
They are in order for a reason.
..Step by Step to fix your Mac

I am having multiple issues with syncing my iphone calendar and outlook There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone I mostly enter items on my laptop

I am having multiple issues with syncing my iphone calendar and outlook calendar on my laptop
I mostly enter the original items on my laptop
There are often 1 hour time differences in the entries on the 2 devices and sometimes events that have been amended are not updated on iphone

This sounds like an error in Time Zone support. The time zone needs to be the same in Outlook as well as the phone.

Issue with Visibility Settings for Backgrounds and Layers

I am using Acrobat Pro XI 11.0.10 (Windows) and having an issue with visibility settings for layers and backgrounds. I am attempting to get backgrounds to appear while viewing in Adobe Reader and Acrobat Pro but not be printed and so far have had no success.
When using a background the Appearance Options dialogue has "Show when printing" unchecked, but "Show when displaying on screen" is checked. This results in the background not showing on the screen, and the background will only appear once the box for "Show when printing" is checked. It looks like the option for printing is dictating whether or not the background is able to appear.
Using layers has not worked either. The background layer is set to "Never Prints", but will still show up when printed.
I was wondering if anyone else has run into this and has a solution, or has any recommendations.
Thanks in advance.

Hi setrev2012,
How are you adding the backgroud?
The only way I can think to accomplish this is via a watermark.
The basics...
Open PDF in Acrobat. Choose Pages > Watermark > Add Watermark.
Select a jpg or PDF of your background and adjust scaling options as desired.
Then click the Appearance Options.. and uncheck the Show When Printing option.
In this image the PDF is a blank page with the word "Test" on it. The watermark is the stamp and impression (a stock photo jpg).
If you want a solid color background, just create a flat image of the background color for use as the watermark.
If you have already followed the steps and still facing the issue then please share the file with me at [email protected] so that i can have a look.
Regards,
Rave

Network controller and pci device driver missing for Toshiba Sattelite c55t b5109

After resetting windows 8.1, I only my ethernet works and I cant turn my wifi. I looked in the device manger, and under "unknown devices" are listed Network Controller and PCI Device with yellow alerts near them. I know that these are related to the wireless card, but everytime I try to update them they say that there is no driver for them.
These are their hardware id's:
Network Controller:
PCI\VEN_168C&DEV_0036&SUBSYS_083211AD&REV_01
PCI\VEN_168C&DEV_0036&SUBSYS_083211AD
PCI\VEN_168C&DEV_0036&CC_028000
PCI\VEN_168C&DEV_0036&CC_0280
PCI Device:
PCI\VEN_10EC&DEV_5229&SUBSYS_F91B1179&REV_01
PCI\VEN_10EC&DEV_5229&SUBSYS_F91B1179
PCI\VEN_10EC&DEV_5229&CC_FF0000
PCI\VEN_10EC&DEV_5229&CC_FF00
PLEASE HELP!!!!

search your laptop for the Toshiba application installer, open it and use it to install your Wireles lan driver.
The application installer is easier than guessing which one you need from your support page.
OR
Your support page is here - http://support.toshiba.com/support/modelHome?freeText=1200008391
You can select the drivers tab then down the page on the left hand side select Windows 8.1 64 bit to narrow down the drivers for your operating system. Then also select Wifi and the available drivers will be displayed.
If you are getting a corrupted system after a reset your hard drive may be failing or your recovery partition may have been corrupted . Create your recovery media if you have not done so already.
S70-ABT2N22 Windows 7 Pro & 8.1Pro, C55-A5180 Windows 8.1****Click on White “Kudos” STAR to say thanks!****

HP 14-d017AU: Issues with Webcam, Network, Ethernet, VGA and PCI Device drivers

Similar Messages

Maybe you are looking for