HP 15-d041tu Notebook Some USB Stuff is not working?

I have bought this Notebook computer which is model HP 15-D041TU which has a Celeron N2810 / 2GB / 500GB HDD and having trouble with it ever since i bought it. First there were issues with finding correct drivers for the sytem which took me nearly 3 days to solve. The drivers that was provided in the website didn't work with the system plus automatic drivers detection software does not detect the system. Now i got everything installed and running perfectly well with windows 7 64BIT Version. Another problem arises,
My iPhone doesn't work, it tries to connects but breaks in the middle with blimb blimb sound coming repetitiously until USB Device gives a error
Next problem is i use to have Virus mouse ( Some cheap chinese bran Je-Way or something ). It works perfectly with all computers except for this one, driver doesn't install on this.
What's happening with this computer? is there something i don't know about USB 3.0 and windows 7? some old devices doesn't work? my iPhone works perfectly with all other computers with same cable and same itunes and same windows 7 64.

Hello nofacemonster, welcome to the HP Forums.
I see that you're having an issue with a mouse and iPhone connect them to the usb 3.0 port on your notebook. I will try to help you with this.
The first thing I'd like to provide you is this document: Troubleshooting USB Connections (Windows 8).
The issue you may be having, is with backwards compatibility. The document may be able to help you with that. Some older device just may not work with usb 3.0 though. It does depend on the device.
In regards to the iPhone, this post on the Apple Forums should answer your questions: Re: Simple. Does the iPhone 5s have usb 3?
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Similar Messages

HP Pavilion dv7-6c23cl Entertainment Notebook PC usb 3.0 not working

I had a hard drive failure and replaced with new drive. Did a clean install of Windows Home Premium x64 and have since had several items listed in the device manager as unknown/no drivers found.
One of the noted effects is the 3.0 USB ports on the left do not function properly. They provide power but will not read any devices. The standard ports on the right function fine.
I have done several rounds of windows updates and have downloaded and installed all the related drivers from this page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=5218...
The Other Devices listed in the device manager with (!) warnings are:
BCM20702A0
SM Bus Controller
Universal Series Bus (USB) Controller (listed 2x)
Any help or advice would be greatly appreciated.
This question was solved.
View Solution.

Hi:
Please install the AMD chipset driver and reboot. You want the first file listed on the webpage.
That should install the smbus and usb 3 controllers.
http://support.amd.com/en-us/download/chipset?os=Windows 7 - 64
The other device is the BCM bluetooth radio that needs a driver.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-96962-1

External USB HD does not work with HAL:

External USB HD does not work with HAL:
From the last 10 days the HAL auto-mount with ntfs-3g file system of my external hard drive does not woks.
But the manual mount procedure with the command mount -t ntfs-3g /dev/sdb* /mnt/XYZ works.
I've followed the instructions in the wiki: http://wiki.archlinux.org/index.php/HAL and the system has worked up to the last kernel or HAL update.
My fat32 usb-stick works without any problem.
If I try to open the device with KDE it appears an error popup wit this message:
TODO: have to rethink extra options
Error: kio_media_mount_helper
The log from the kernel.log is
Nov 6 22:03:16 myhost usb 5-1: new high speed USB device using ehci_hcd and address 4
Nov 6 22:03:16 myhost usb 5-1: configuration #1 chosen from 1 choice
Nov 6 22:03:17 myhost Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Nov 6 22:03:17 myhost ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Nov 6 22:03:17 myhost Initializing USB Mass Storage driver...
Nov 6 22:03:17 myhost scsi6 : SCSI emulation for USB Mass Storage devices
Nov 6 22:03:17 myhost usb-storage: device found at 4
Nov 6 22:03:17 myhost usb-storage: waiting for device to settle before scanning
Nov 6 22:03:17 myhost usbcore: registered new interface driver usb-storage
Nov 6 22:03:17 myhost USB Mass Storage support registered.
Nov 6 22:03:22 myhost scsi 6:0:0:0: Direct-Access WDC WD32 00JB-00KFA0 0811 PQ: 0 ANSI: 0
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Test WP failed, assume Write Enabled
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sdb: sdb1
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Attached SCSI disk
Nov 6 22:03:22 myhost sd 6:0:0:0: Attached scsi generic sg2 type 0
Nov 6 22:03:22 myhost usb-storage: device scan complete
and the error.log is
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Nov 6 22:03:22 myhost sd 6:0:0:0: [sdb] Assuming drive cache: write through
Do you have some idea ....
Bye.

I have done the following:
Downloaded the patched hal version.
used makepkg in /abs/local/trunk/ to create a pkg for pacman
used sudo pacman -U pkgname to install it.
used sudo nano /etc/hal/fdi/policy/preferences.fdi to create the fdi file with the following content:
saved the file and removed my ntfs entryes from fstab and rebooted. and still there is no automount off ntfs partitions.
have i done something wrong?
br fjodork
WARNING: what follows is a guide of what did work for me, I'm still in an early stage of learning linux, so please correct me if anything of what follows is wrong/dangerous/stupid. As I said, this worked for me, it's not pretty, since I was learning each step on the fly and I'm sure there are better ways to do this.
So fjodork, you seem to have done the the necessary steps, though i couldn't get it to work until i first removed hal without dependencies
pacman -Rd hal
it will give you some warning about the dependencies, ignore it since we are reinstalling hal in a few steps.
First i tried to follow Raymano's link, obviously it showed me nothing in the browser so I thought it might be a broken link.
So I downloaded the source tarball from here http://hal.freedesktop.org/releases/hal-0.5.10.tar.gz
unpacked it changed the /tools/hal-storage-mount.c as per Milfadoodle's instructions.
at first I tried to compile directly from source, the process would finish without a glitch though after reboot nothing changed, as if hal weren't
installed, i guess there were issues with paths. anyway read on
Then repacked the source in tarball, copied it to /var/abs/extra/system/hal and modified the PKGBUILD as follows
makedepends=('pkgconfig' 'gperf')
options=('!libtool')
install=hal.install
source=(${pkgname}-${pkgver}.tar.gz #removed url so makepkg looks in the current directory for the tarball
hal
hal-policy.patch
cryptsetup_location.patch
hal-0.5.9-hide-diagnostic.patch
ntfs3g-valid-options.patch)
md5sums=('6641c30a27c00485c6accac5110ff911' # replace with md5sum of your package's sourceball (run md5sum filename)
'882f67668cb14a0a9e4a27ef22278027'
'5ba8b610aa9763a5f42b9f7cbd7a86ad'
then makepkg (i had to add --asroot, don't ask why
and finally pacman -U hal-0.5.10-1-i686.pkg
another reboot and everything worked without a glitch!:D (yeah i know i still haven't got rid of the reboot mentality )
I have also put the policy files as per the wiki instructions.
PS: I know this is a dirty way to getting things done but as i said, I'm just starting
If anyone could comment/correct/explain this post I'd be more than happy, the automount issue was bothering me for about a month now (you'll say why do I need ntfs in the first place? well, I only recently switched for Linux as my primary OS, these are some relics of the M$ era

USB hub does not work! Help

I was attempting to install a KVM switch for my G4 and G5 that required me attaching my keyboard and mouse to the usb port on the back of the monitor.
The USB hub does not work! Monitor cable has no bent pins, and works perfectly for video with all my Mac's, G4's, G5's. The problem is I have had this monitor awhile and never tried these ports so apple won't help.
Anyone have any suggestions why these ports don't work and if there is a fix?
Can any one recommend a KVM switch that supports ADC, and USB so I bypass this hub.
Thanks

Some USB 2.0 hardware works very well w/USB 3.0 & some don't. Suggest that you contact the sound card manufacturer & ask them. Perhaps they can recommend a work-a-round.
Another user posted about the same problem some weeks ago regarding a sound card.

USB ports does not work

Hi I have problems with not working USB ports. It used to work. I downloaded actual drivers at msi.com for my gaming notebook GX 60 Destroyer and now my USB ports does not work. What should I do?

What driver have you updated?
Try to do an EC firmware reset by removing the battery and the AC adapter then put the battery back with AC adapter attached.
Same questions like Pegasus asked, does all ports not working? which one exactly? What OS are you using?
Have you done any changes to the system? (for example: self-install OS or changing OS)

Audio output and left USB port is not working!

Hi! I have MacBook Air 13" late 2010, Audio output and left USB port is not working!
What happened?
Part No.: Z0JH000TE RS

If the left USB port doesnt work with an external mouse its seems to be a hardware malfunction of this USB port.
The newest BIOS is already installed?
Have you removed all USB ports from device manager and restarted your notebook?
If you have already tried this, contact an authorized service provider. The guys can try to fix this issue and it should be covered by warranty, if you still have warranty on this notebook. :)

T420 USB Ports do not work after installing XP

Hello my office has been using Lenovo's for some time now but we recently purchased a T420 and installed Windows XP SP3 on it. The issue we are having is that the uSB ports do not work. I have tried every driver I can find but still no luck, can anyone help?

hey chris0277,
could you check in Device Manager and see if there is any ? or ! symbol on the USB area.
If there is, i do recommend uninstalling the drivers from it and then visit http://support.lenovo.com and update your unit
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article.

One of my usb ports in not working

On my compaq presario v5000, os xp media center, the bottom usb port is not working. When i plug a thumb drive in, it does not reconize it. The mouse lights up but does not work. It shows up in device manager and says it is working properly. The other port works fine. Just reinstalled windows and the computer is completely up to date with all the service packs etc. Have tried unpluging and restarting to no avail. Have tried updating but says it cannot find a better driver. Please Help. Thank you.

Could you please give me the exact model number of your notebook?
You can use the following document if you need assistance in finding it.
http://goo.gl/GDeRb
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I have a macbook pro with OSX Mavericks 10.9.5 and some keys that are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it

I have a macbook pro with OSX Mavericks 10.9.5 and some keys randomly are not working. Specifically, the enter/return button, the "p", "0", ";", and all the function keys. What's really weird is that happens randomly. I've never spilled anything on it, and I can't for the life of me figure out how to fix this. Can anyone help? of course this happened after my warranty expired.

**update**
I don't know if this will help someone but I am posting this for that purpose. In the past when I first had this problem, I'd read a post somewhere (sorry, long ago, don't have the link) where an individual was having the same problem and they stated that when the MBP got heated, that's when the keys would stop working, and they went into the MBP and jiggle some stuff around (a specific wire, I'm not electronically inclined so I know NOT of what they spake!). Well I didn't want to do that but it always stuck in the back of my mind. I had given up, really, and was planning to take my MBP to the apple store. But by chance one night I left my MBP on the floor where it's cool, and when I turned it on, the problem went - poof! It seems there was some validity to the post that spoke about heat, because my problems started when I would stream foreign dramas on my MBP for hours at night, and I would hear the fan going off all the time, and in the mornings, my "p", "enter", "0", ";", and all the function keys would stop working.
So, maybe try keeping the MBP in a cool place when it's off. Since I've started doing this overnight every night (keeping it on the cool floor, out of reach of any big feet), I have not had a single problem with my keyboard.
Hopefully this might help someone.

USB ports disabled/not working

My USB ports aren't working, one is completely dead and the other supplies power but I receive an error saying the port has been disabled due to the device using "too much power." I have restarted and updated with no luck. The devices work fine on my friend's computers with no error prompts. The laptop is 2 days old and I haven't done anything that should cause a short out, other than removing a USB storage plug without ejecting first.

USB plugs only supply *so much* power to USB devices.
The usual fix is to buy a self-powered exteral USB hub (AC adapter plugged into wall). That takes 95% of the power load off of the MBP.
But then some USB hubs do not play nice with Mac, and some devices do not play nice through an external hub at all due to the additional translation of USB signals.
First thing ... do not repeat overtaxing the USB ports ... only bad comes of that, even though the MBP usually can dened itself from damage -- usually.
Go to macsales.com, see what they recommend for powered USB hubs, since they try hard to be mac-compatible nad may have beter bets thn randomly trying ones from Best Buy or Fry's or Microcenter.

USB and iSight not working

Hi, I've been having some issues with my macbook:
(1) My front USB port is not working. I've been getting the following message everytime I restart (even when nothing is pluged in): "Becayse a USB devide was drawing too much power from your computer, one or more of your USB devices have been disabled". I've tried resetting the PRAM and SMC, this does not work.
(2) My built-in iSight no longer works. I tried using skype and photobooth and the camera is not detected. I looked in my system profilers and isight is listed but I'm not sure what this information tells me (see below):
Built-in iSight:
Product ID:          0x8507
Vendor ID:          0x05ac (Apple Inc.)
Version:           4.42
Serial Number:          8TA5B04NPDCJ6F00
Speed:          Up to 480 Mb/sec
Manufacturer:          Apple Inc.
Location ID:          0x24600000 / 2
Current Available (mA):          500
Current Required (mA):          500
(3) My battery drains when my macbook is in sleep mode (this was not happening before).
(4) My computer seems to be getting really hot. This cause the bottom rubber of my macbook to start peeling off. I've downloaded iStat to keep and eye on the temperature but I'm not sure if this is related to my other issues.
Does anyone have any idea what could be causing this? Are there any tests I can run? I'm not sure if these issues are related or not. Please help.

chantal102 wrote: ...restarting and holding the D key but nothing happens when I do this...
According to the AHT instructions on p. 61 of the manual for your 13-inch Mid 2010 MacBook, http://manuals.info.apple.com/en_US/macbook_13inch_mid2010_ug.pdf you did the correct restart process. To me, the fact that AHT does not work either is one more indicator of likely hardware trouble.
chantal102 wrote: .. I would like to try everything I can do myself before bringing it in...
If nothing else you try fixes your issue, try restoring your Mac's software. If neither a Time Machine restore nor a complete restore to factory original condition (p.60) corrects your trouble, I think you are left with the choice of AASP service or deciding whether it is time for a new Mac.
Message was edited by: EZ Jim
Mac OSX 10.8.2

Hp 15-D018TU USB SS PORT NOT WORKS

Hi, In my HP 15-d018tu Notebook PC the USB SS port not works.Can anyone look into this problem and guide me.
Thanks in Advance

Hi:
Did you install the applicable usb3 driver?
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_135422_1

Standard Enhanced PCI to USB host Controller not working

Plz help me its suck i can't find any driver for this USB port its suck all my usb ports are not working they not accepting any usb or some thing or intel managment interface also not working plz help me . Thankyou
Us Device PCI
Device PCI\VEN_8086&DEV_1E26&SUBSYS_17F8103C&REV_04\3&11583659&0&E8 was configured.
Driver Name: usbport.inf
Class GUID: {36FC9E60-C465-11CF-8056-444553540000}
Driver Date: 06/21/2006
Driver Version: 6.2.9200.16384
Driver Provider: Microsoft
Driver Section: EHCI.Dev.NT
Driver Rank: 0xFF2005
Matching Device ID: PCI\CC_0C0320
Outranked Drivers:
Device Updated: false
Intel Mangagment interface
Device PCI
Device PCI\VEN_8086&DEV_1E3A&SUBSYS_17F8103C&REV_04\3&11583659&0&B0 was configured.
Driver Name: null
Class GUID: {00000000-0000-0000-0000-000000000000}
Driver Date:
Driver Version:
Driver Provider:
Driver Section:
Driver Rank: 0x0
Matching Device ID:
Outranked Drivers:
Device Updated: false

What is the installed operating system?
In which region of the world are you located?
Try the following Intel Management Engine software
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-113870-1&cc=us&dlc=en&lc=en...
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Apple USB keyboard does not work with one internal usb port

Hi everyone,
hope someone can help me to solve my problem. I have a MPB13 retina late 2013 since something like 3 months. I have additional screen (dell), usb wired keyboard (apple) and BT magic mouse.
Since a few days, my usb keyboard does not work well. It only want to work properly when plugged to the rights side usb port internal port and not anymore on the left one. It also work on a usb external concentrator. Before, I had no problem, it worked perfectly. There was no problem such as cofee on it...
After searching the web on such problem, I tries a few things such as:
I tried the keyboard on another computer (windows): works fine
I tried usb stick and external DVD reading on the left internal usb ports: works fine
I switch the MPB off and turn it back on: the usb keyboard still does not work on the left usb port
I tried the SMC and PRAM reset : nothing
Any idea ??
Thanks
Guillaume

I'm facing the same problem, found any solutions ?

External USB keyboard does not work with T60 after BIOS upgrade

External USB keyboard does not work properly with T60 after 2.26-1.07 BIOS upgrade.
It does the same with or without the docking station.
Anyone else bumped into this problem yet?
Has someone found any fixes for this?
t

Hi and welcome the forum!
Try uninstalling all USB hub devices from the device manager and reinstalling them again, particularly the keyboard's.
v2.26 is supposed to fix the issue according to lenovo:- http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-63024
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

HP 15-d041tu Notebook Some USB Stuff is not working?

Similar Messages

Maybe you are looking for