HP 15-d103tx starts overheating even after changing the Motherboard and cooling fan.

I puchased a laptop before 6 month but it starts overheating in very less time. The motherboard and cooling-fan has been changed but again started overheating in 2 weeks.
Is there problem of intel processor or some other problem??

Dear Customer,
Welcome and Thank You for posting your query on HP Support Forum
Please perform the below shown steps to resolve the issue:
1. You should clean all the Vents and Openings really good with a can of compressed air
2. Check if the Fan is spinning when AC Adapter is connected
3. Boot into the BIOS >> System Configuration >> Device Configuration >> Enable "Fan always ON"
4. Update the latest BIOS and Graphics Driver
Note: Please Click Here to find more steps involved in troubleshooting this issue
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
I work on behalf of HP

Similar Messages

My canon sx120IS continues to show low batter and shuts off even after changing the batteries.

My canon sx120 is continues to show low battery and shuts off even after changing the batteries. Any suggestions? Do I need to send it for repair somewhere, and if so, where?

Hi LB!
Thank you for posting on our forum!
Try cleaning the electrical contacts on the camera and the batteries using a soft microfiber cleaning cloth. If the same warning still displays, then the camera will need to be serviced. To start the repair process, you'll need to complete a Repair Request on our website.
If the camera is more than a year old, you may participate in the Canon Loyalty Program instead. The Canon Loyalty Program option allows you to replace your current camera for a discounted fee, plus shipping. The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.
If you would like to take part in this option, please call our Sales Department at (800) OK CANON (800-652-2666) seven days a week, 8am to Midnight. Let them know you have been working with online support and the Canon Loyalty Program was offered. Be sure to have your serial number for your camera at the time of your call.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

My vi is writing just the same data into spreadsheet even after changing the loop iteration time. hw can I change this mode ?

My VI is writing the same amount of data into spreadsheet file even after changing the for-loop iteration time

You should post the VI (with appropriate values saved as default) to this thread. (At least a JPEG or PNG screenshot).
Inside the For Loop, right-click on the N terminal and create Indicator. Run the VI and you will see how many times the Loop spins.
Further guessing: You may have a 2D array with two rows and many columns feeding the For Loop.

HT3176 my apple remote will not link to my appletv even after changing the battery

my apple remote will not link to my appletv even after changing the battery. can anyone help?

Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

While i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

while i was updating my iphone5, it showed that my sim card is not applicable. even after changing the sim card, i am not able to update or restore my iphone. what should be done?

Hi there aliyan,
I would recommend taking a look at the troubleshooting steps for "No SIM" found in the article below.
If you see 'No SIM' alert on iPhone
-Griff W.

I dropped my ipad and the screen blacked out and could not be turned on even after pressing the sleep and home button

I dropped my ipad and the screen blacked out and could not be turned on even after pressing the sleep and home button.
I tried connecting the device to my computer and itunes said that it could not identify my device.

What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
 Cheers, Tom

Can't log in (Mac OSx 10.6.6) even after changing the password 8 times!

Not happy.I can't believe how hard it is to get support from Spotify for a service I am paying them for! Having to trawl through chat rooms is not customer care! Basically, I can't log into Spotify even after changing my password. I am at work but the tech bods say it should work fine (always has done until now). I just need someone to let me into the service I am paying for!If anyone see's anyone from Spotify hiding anywhere, please let me know.

If I follow that link you just sent me and use my email address for the username (I don't have/ can't remember my username) and put my password in it doesn't work. If I use my email and password to log in (using the link sent to my email to reset my password) it logs in fine. It doesn't recognise password on the Spotify App

Macbook pro will not turn to almost have changed the motherboard and the power supply board

Hello,
A customer brought me to repair his macbook pro A1151, the computer flashed, I had to change the power board and the motherboard and the computer still does not turn.
The customer used a power supply with wire was déterrioré there were overheating the power supply board has traces of burns and a component of the motherboard is broken.
What may be another problem that prevents your computer from turning on?
Thank you.

Run an Apple Hardware Test:
http://support.apple.com/kb/ht1509
It may pick up some information that might give you a clue as to the unusual behavior.
Note: An error free AHT is not always definitive.
I still would go to an Apple store genius bar and have the MBP examined. It will be done for FREE regardless of warranty status.
Ciao.

Problems logging in even after changing the port

I first had the problem logging in when I got my mac, and changed the port number and all was fine.
Just recently, after some unrelated issues with our router, I started having more problems. Things were working up until yesterday.
I will try to log in to iChat using the 443 port number, and it tells me " An undefined AIM socket error occured", then switches to the original port number, logs me in and out repeatedly, and says I have tried to log in too many times, etc. It won't keep the 443 number set for logging in either.
Help!

Hi,
Try these two things one after the other. (i.e. use the second if th first does not work)
1) Go to you home Folder/Library/Preferences by manually clicking through them
Delete com.apple.iChat.AIM.plist and then restart iChat.
Restarting iChat recreates the .plist and forces it to re-establish the Login info.
If successful change the port to 443.
2) GO to the iChat Menu > Preferences > Accounts and highlight the miscreant
Use the Minus button and delete it.
Re-add the Account/screen name using the Plus Button.
9:50 PM Friday; April 3, 2009

Sending mails even after changing the rpd.

hi,
i have successfully created the functionality of ibot, conditional ibot and chain ibot.
i can see the report in the mails.and everything is working fine now.
If i want oracle bi to send the mails (to let the ibot run ) even when i change the repository by making changes into instanceconfig.xml and NQSconfig.xml, will that be possible.
for example
i have created a repository Employee.
which point to my oracle 1o g server named emp_server.
I am using the employee_data schema out of it.
which sends mails to employee which are there.for exampel abc, xyz.
Now i want to create another ibot which would be different server in different schema and will be using different mailing list.
i can do this by making changes in the instanceConfig.xml and NQSconfig.xml and can create ibots which will shoot mail to my manger list.This is also working fine.
Problem is if i make change in above file my oracle BI will point to second rpd and mails from first rpd will not work.
Can i make changes so that both the mails should work.of employees and manager too.
thanks in advance.

hi..
think of merging of repositories..
so that, all subject areas presents in single repository..
this is common to merge different rpds, for every project. So that you need not to change each time you change the rpd...
and all reports works fine... with single rpd..

Firefox is already actif but does not respond. and even after changing the default properties the problem comes back (Read-only)

everytime I close Firefox, it select the option "Read-only".
I stop the proces via Task management and then I can start Firefox again. I close it and the "Red-only" option is back again.

Do you get this error only after closing and restarting Firefox or always?
In case of the latter:
Do you still have a default profile and is the profile as you see in the profiles.ini file marked as "Default=1" still present?
*http://kb.mozillazine.org/Profile_folder_-_Firefox
Try to delete the profiles.ini file to force Firefox to create a new profiles.ini file and a new default profile.
*http://kb.mozillazine.org/profiles.ini_file
*https://support.mozilla.org/kb/Firefox+is+already+running+but+is+not+responding
*http://kb.mozillazine.org/Profile_in_use

Migration Assistant created new account to deposit all my stuff, but I can't access that account, even after changing the password via the main acct'

I am at my wits end. The migration assistant created a new profile (I didnt konw that it would do this) and now I can't get into that profile with all the stuff from my old PC.
I have tried changing password via the main account, but to no avail. I have researched issues with Keychain, but all it tells me to do is change the login password - that doesnt work either - I cant get to all my files.

Migraine Assistant it's called.
Delete the account from the main one, create a new account and transfer files manually via a regular FAT external drive you pickup at any office or computer store, Mac's can read it.

I can't find the reset firefox command button - even after trying the menu and the trouble-shooting page as per the directions.

I want to reset firefox but all I get to after following the directions in Mozilla support is every more descriptions/explanations of what the commands mean. But I never get to the actual command 'reset firefox'. Where is it?

By way of background, this is the article on Reset describing what it does, what you keep, what you lose, and how to do it: [[Reset Firefox – easily fix most problems]].
So... is the button missing? Open the support page using either:
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
The Reset button usually is in the upper right corner of the page in its own little box. Missing?
By the way, why do you want to reset?

Can not start SAP instance after change the profile

Dear all
We use system copy to build SAP system.
Source
Ecc 6.0(64 bit)
Windows Server 2008 SP2
SQL Server 2008 SP2
Target
Ecc 6.0(64 bit)
Windows Server 2008 SP2
SQL Server 2008 SP2
In target system, we want to use the instance profile as source system,
but after copy from source system we find that if parameter em address_space_mb = 512 in the profile,
we can not start SAP instance.
Could anyone explain it?
Best regards
Shirley

Hi Shirley,
I assume the hardware is less on the target than on the source or they are different at least in terms of hardware specs
If the system is not starting, check the dev_disp.log, the stderr* files, and the dev_w0 log from the work directory to find the exact error. Does the system start if you increase or decrease this value?
Regards,
Paul

My imac would noy start, not even after trying the unplugging or the alt-command-P-R. It makes a sound but the screen stays black.

My imac does not start!!! Ive tried unplugging it, pressing the power button and plugging it back as well as the command-control-P-R.

Hello
you can try boot in single user mode by hold at start up CMD-S key on keyboard ,see if a comande line interface is show on screen
try use D key on start up see if Apple Hardware Test is launch
try plug an external display if you can
try boot with ALT key see if bootmanager is show
if none of thouse methode show anything on screen your imac probably need to be screen serviced
HTH
Pierre

HP 15-d103tx starts overheating even after changing the Motherboard and cooling fan.

Similar Messages

Maybe you are looking for