HP 15-f039wm Windows 7 Driver Problems REOPEN PLEASE

http://h30434.www3.hp.com/t5/Notebook-Operating-Systems-and-Software/HP-15-f039wm-Windows-7-Driver-P...
Im experiencing the same issue. A very nice person posted links to drivers to help solve the issue, but the 2nd link for  the graphics card is no longer valid. Does anyon know were i can find the driver thats listed in the previous link?
Why does it affect my HP15 after downgrading to windows 7.. and is there a support page on HP.com where i can find these drivers just in case i need to format my computer again in the future?

Try the Intel driver update utility.
http://www.intel.com/p/en_US/support/detect?iid=dc_iduu
Try the following HD graphics driver
https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24391&lang=eng&ProdId=3590
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

Similar Messages

  • 160GB iPod Classic Hard Drive Problem? please help!

    hi,
    I've been trying for weeks to figure out what is wrong with my 160gb classic. it is 14 months old, so just out of warranty. I recently updated to iTunes 10.1.2, after not having synced my iPod for a few months. a few weeks later i went to plug in my ipod and it wasn't recognized by iTunes. i got a bit worried, so i kept trying to unplug it and plug it back in. the one time it popped up, iTunes said it needed to be restored, but the restore failed and it was stuck in disk mode when I unplugged it. I replugged it in and it would only show up in Disk Utility. after tonnes of searching, i tried to do an erase from there, which only made things worse, as the erase constantly failed. Finally i tried to plug my ipod into my old PC running Windows XP. after a few tries iTunes recognized it. the first few restores failed, but after about 5 one completed and i could finally access the menus on my iPod again. However, my ipod still won't show up on iTunes on either of these computers. I did a diagnostic test (SMART or whatever) and the number of the ones that aren't supposed to be high are really high. it this a hard drive issue? is there anything i can do?
    another thing i ended up doing is plugging my dad's 3G nano into my mac. iTunes wouldn't recognize it either, which worried me. Disk Utility would see it though, so i just ejected it as to not break it any more.
    I really want ONE of these ipod's to work! please help!

    Look at the following support article and work your way through the steps
    http://support.apple.com/kb/ts1369

  • Windows  Driver problems

    Hello
    After yesterday the failure with the mini, that only boots from xp i've got another problem after reinstalling all
    after installing XP i want to install the Apple drivers for XP but the installer hangs on "Apple build in bluetooth" and the other problem is that i haven't any Ethernet adapter or wireless the xp driver installer wants to reboot but when i do that the other device won't work because the drivers aren't installed
    The following devices won't install or won't install properly
    USB-hid (one time) the other two are installed
    Unknown Device
    Ethernet controller
    PCI-device
    PCI-device
    After the wanted reboot from the installer i've got
    2 devices with a ! the bluetooth device and USB-Hid
    and i've got a list of 13 unknown devices and one PCI-device
    I'm using a xp Corp. Version with SP2 could that be the problem
    i've googled around but i can't find a solution
    MAC-mini 1.5 single   Mac OS X (10.4.6)   P IV D 830 (s775), PIV 3.2 HT (s478), PIV 2.6 HT(s478), AMD Athlon XP 2400 (sA)

    I think you should update your Windows ME to Windows XP, PC Suite works very well there. I heard that even Microsoft isn't supporting Windows ME anymore, too many bugs there

  • DVD drive problem; Help please!

    Hello!
    I just bought a Toshiba laptop a few days ago and it has been working great, except today as soon as I turned on the laptop, the DVD drive opened and now it wont stay closed. Once I closed it, it popped open a few seconds later.
    Does anyone know how to fix this problem? Does anyone know why it's happening? Thank you!
    Write what must not be forgotten

    Thanks for your help, guys!
    Well, my DVD drive closes now. Should I still return it though? Or call Toshiba tech support?
     I bought it online, so I didn't really get any warranty.
    Write what must not be forgotten

  • Original internal hard drive problems - advice please

    hello forum members, i am looking for advice with my situation and would be grateful for any suggestions.
    here it is, i have a 2003 model dual 2gb G5 shipped with a 160 Serial ATA internal hard drive.
    i purchased a second 500 WD drive becuase the 160gb drive seriously malfunctioned, disk utility, apple jack nor disk warrior could help and i had delete and reinstall the 160 drive. I then purchased the second drive to act as a safe guard against loosing some serious amounds of data again (once bitten, twice shy).
    only now the 160 has gone again. it allowed me to fix with disk warrior (or so i thought), but when i changed it back to the start up disk it stopped functioning properly (SMART status now saying "not supported"). It will allow me to view some of the files that are on there, but when i try to open anything i get the spinning beach ball and it makes a very repetative noise and doesn't do anything for ages, sometimes allowing me too look inside folders after a while, but not allowing me to move anything.
    i have lost all trust in this drive, is it the drive or have i done something wrong? if i replace the 160 with a second WD would my computer still function or could it be the WD that is causing the problems?
    any help or advice would be greatly appreciated
    Thanks in advance

    When a four year old drive starts acting up, you should replace it; zero the drive and hope it can be used as an archive backup - AFTER zeroing the drive or using (Speedtools etc) to map out bad blocks.
    You should have made the 500GB your main drive. Also always keep TWO backups. The 500GB would also be faster.
    Keep one backup at least always off line, even while backing up to your alternate drive. And have a bootable backup of the last OS revision. A bootable drive set aside just for emergencies - for running DW, Applejack, TTPro etc. Then keep your backups current with CCC or SuperDuper.
    SMART isn't that SMART or good at predicting. Zeroing a drive every year or so is always a good idea. As is a backup - Erase - Restore from time to time.
    FireWire and FireWire/SATA drive cases are one way to hold your backups. 500GB WD drive from OWC is less than $120.

  • Realtek high definition audio has a driver problem in windows7(32bit)

    Hi...
    I am installed realtek hd audio drivers in windows7 32bit for no sound(red x mark at sound icon taskbar). Its installed successfully, but it showing error like.. 'realtek high definition audio has a driver
    problem'.
    Please help me! how to fix the problem(Intel P4(Model-D101GGC)).
    Thank u

    The support page for Intel D101GGC Desktop Board is here:
    http://www.intel.com/p/en_US/support/highlights/dsktpboards/d101ggc
    The audio driver listed is the Realtek ALC Audio Driver. You can download the Vista/Windows7 driver here:
    https://downloadcenter.intel.com/Detail_Desc.aspx?ProductID=2229&DwnldID=19472&lang=eng&iid=dc_rss
    Is this the driver you are having problems with? If not, suggest you uninstall current non-functioning driver package and install this one instead.

  • External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware

    External hard drive connected to my airport extreme will no longer open, when navigating to it in Finder, the Finder window quits and reopens, cannot access hard drive, it is visible in airport utility, since the problem began I have updated firmware on Extreme as well as both of my Airport Expresses. Hard drive is USB connected to Extreme.

    Reboot the USB drive.. assuming it is powered.. or unplug and replug a self-powered drive.. (you should not use self-powered drives on AE before the latest model.. always use a powered hub).
    Does the drive now appear in finder..
    If not reboot both drive and the AE.. it should now appear.
    If it doesn't work with direct connection try a powered hub.. that can help.

  • Windows 7 - HP Laserjet 8500 print driver problem

    I have tried everything imaginable to correct this HP 8500n print driver problem with no success, please help!
    I cannot correct or get rid of a reoccurring “Incompatible Print Settings” error dialog box message that repeatedly states that “There are one or more conflicting settings. One of the settings is: Output Bin: Mailbox 1, Accessory Output Bin: Not Installed”. The radio button options are “Restore my previous settings or Keep this setting, and I will change it later”. This same dialog message repeats 13 times for all the other various conflicts each time you click on printer properties to change to 2 sided printing or any other printer settings. This printer does not have any of these features attached or set into it.
    I am a volunteer that manages a number of computers on our small church LAN, 2 computers operating on MS XP-SP3, 2 on MS Windows 7 Home Premium and my 2 problem computers that came pre-installed with Vista Home Premium of which I have performed an HP OEM upgrade to Window 7.
    I have isolated this print driver problem to the Vista operating system and even when computers are upgraded to Windows 7 does not correct this driver error. I have also tried every possible print driver variant of the HP 8500, HP8550, PCL, PS to include the Microsoft versus HP versions with no success. In each case I get this error yet neither of the XP computers or the computers that had Windows 7 as a original operating system have no problems with their print drivers for this printer.
    Yes, I have repeatedly searched and upgraded the operating system and print drivers. In desperation I have even tried to find the correctly behaving Windows 7 print driver and transfer it to these Vista upgraded to Windows 7 machines. However I could not isolate the driver location.
    The only thing I can conclude is that this errant HP print driver was resident within Vista and remains resident even after a HP OEM Windows 7 upgrade. Additionally, all of these computers are configured to access this printer via its static IP address on the network.  The XP computers are 32 bit, all of the Vista upgraded to Win 7 and OEM Win 7 computers are 64 bit machines all with respective OS. 
    Can anyone please help me correct this problem?

    Hi, 
    Unfortunately I can't see your uploaded image yet as it is awaiting approval from HP.
    From what I can see you are correct that HP does supply drivers for this printer and that the drivers for your printer are already included with Windows 7.  On the machines affected, try the procedure below to see if it helps at all
    Next download revo uninstaller on the link below and install it.
    http://www.revouninstaller.com/download-freeware-version.php
    Disconnect the printer from the PC.
    Run Revo and see if it finds any  HP Printer Software installed.  If it does, right click the software icon and select uninstall.  During the process you may be asked to delete registry entries.  If you are, just select all and click delete.  Do the same for any left over files and folders.  Once completed, reboot the PC.
    Re-connect your printer to the PC and follow the guide below.
    http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?&objectID=c02536257
    If this helps you will need to repeat the process on each of the affected machines.
    Best wishes,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • Lenovo Ideapad u400 6470M driver problems Windows 7 Home Premium 64bit HELP

    I bought this lenovo u400 like 2 years ago and i had no problems, but now my SSD went dead and i bought another, after the replacement i just installed the original windows 7 64 bit home premium, put my notebook's serial installed all the drivers, and when i install the Ati driver from Lenovo my pc gets stuck in a black screen with a white line on the top left of my screen, when i do FN+F8 while booting and start window's safe mode and i go to the device manager i see this ones: 6470M and Intel HD graphics family, when i disable intel hd graphics family my pc boots up normally but the resolution is 800x600 and the max is 1024x768, If i install the Intel 3000 HD my 6470m appears with a yellow triangle on the device manager, i've tried almost 30 different drivers from leshcat, hp, dell, lenovo and AMD's webpage, none of them work, and when i go to the CCC it just lists the intel 3000.
    Sorry for my bad english, im from Argentina, Lenovo's support on argentina sucks, last time i've sent it it costed a lot of money, they scratched multiple parts on my laptop and didn't fix most of my problems, and i can't get the One Key backup anywhere, pls help, atleast AND IF ANYONE WITH A LENOVO U400 WITH WINDOWS 7 HOME PREMIUM IS READING THIS AND HIS 6470M DRIVER IS WORKING, PLEASE CONTACT ME.
    Lenovo, please, don't give me a crappy answer and most of times when that answer does not fix the problem then you give up and don't reply anymore. Im getting sick, i got this laptop for doing 3D modeling, video editing and multiple more and i just can't go and buy another, things are really expensive in Argentina.

    welcome to the community.
    i would recommend that you call Service to request a factory recovery dvd set.
    phone #s here: http://support.lenovo.com/en_US/detail.page?DocID=​PD008370
    for Slovokia, specifically: +421 2 4974 8888 for Think-branded machines and 0800-197-462 for Idea-branded machines.
    hope this helps a bit.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • PLEASE HELP .... Tosiba hard drive problem or dead ???

    Hi ... I never had a hard drive die before.  So I am not sure how this would occur.  Not sure if I purchase a new Toshiba hard drive would solved the problems I am coming across.
    I am using a Toshiba MX4019GAX 40GB h/d for my notebook for about 5 1/2 years.
    Error Message#1: 
     Intel(R) Boot Agent FE v4.1.09
       (c) 1997-2002, Intel Corporation
       Intel Base-Code, PXE-2.1 (build083)
       (c) 1997-2002, Intel Corporation
       PXE-E61: Media test failure, check cable
       PXE-M0F: Existing Intel Boot Agent
       Operating System Not Found
    This is partially solved.  But comes back after a couple of crashes and sometime when I turn on the notebook. 
    After selecting F10 for BIOS boot setup, hard drive is listed as first selection.  The "Primary Master" shows "none" every now and then.  Sometimes it will pick up and list the Toshiba hard drive.  I did see the Toshiba drive listed with garbage (!!!! after Toshiba MX4019GAX) a couple of times.  Already opened the HDD drive bay and checked connections/tighten cable.  Looks okay to me.
    Problem #2:  Notebook crashes while I'm on the internet.
    Error:  States a serious error has occurred and the system will shutdown
    to prevent serious damage (the dreaded blue screen).
    After restarting the notebook.  I get ..... Cannot find file .... c:/windows/system32/config ....
    So I reinstalled the prepackaged windows xp os through setup along with drivers and application programs.  It worked for a while and then crashes again.  I reinstalled again, then I get the error ....
    Problem#3:
    Error:  Faulty driver discovered by plug and play.
    Blue Screen tech info: Setup: 0x000000CA (0x00000001, 0x812c5B10, 0x812c5E30, 0,x000000000)
    Now I cannot even get to windows.  I also disable plug and play through the BIOS
    setup.  I still cannot get to windows.
    Problem#4  While going through Windows setup ........
    Error:  Windows XP require a hard drive volume with at least 492 megabytes of free space ....... Setup was unable to locate such a drive with the required amount of free space.
    I just get a blinking cursor on a black screen now.
    IS THE PROBLEM THE HARD DRIVE?
    I did not hear any rattling or loud noises like most users do. 
    Question #1:  How do users usually know a hard drive is dead?
    Question #2:  What occurances tells a user that a hard drive needs to be replaced (what do the see happen on the screen)?
    Question #3:  Are users coming across the same problems I am having (are these the signs)?
    Question #4:  Checking the C:\ with DOS .... why don't the full 40GB show.  Only see a 100,000+ bytes listed.
    Please advise.  Any help would be greatly appreciated.

    Everything you are seeing is indicative of a failing hard drive.  Ensure that you have backups of any critical data immediately before it fails completely.  Then replace the drive.

  • Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit

    Video Or Graphic Card Driver Problem After Clean And Re-Install Windows 7 32-bit I m Tired I m Finding & Finding Drivers
    But I Wont be Able To Play Games & Other Apps  Please Solve This And Give Me Link For Video Card Driver Or
    Graphic Card Driver For Windows 7 32-bit (x86)
    THANKS
    PROFESSOR TOM........................................

    Hi:
    See if this W7 32 bit graphics driver works...
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloa​dIndex?softwareitem=ob-100029-2&cc=us&dlc=en&lc=en​...

  • Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem

    My XP machine crashed, I reinstalled Premiere Pro 2.0 with Windows 7, and I got the following error: 'The Currently installed soundcard driver does not support Direct Sound Input. Recording audio is not possible.' The soundcard drivers are updated. Any ideas? Here's what I have: AMD Phenom II X4 965 Processor  3.40 GHz 8 GB, 64 bit. Thank you for looking.

    Thanks! Though I upgraded to solve the problem, this is good to know.
    Bob
    Date: Wed, 9 Nov 2011 04:45:42 -0700
    From: [email protected]
    To: [email protected]
    Subject: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem
    Re: Premiere Pro 2.0 and Windows 7 - Direct Sound Input soundcard driver problem created by Steve-Italy in Premiere Pro CS4 & Earlier - View the full discussion
    VERY VERY VERY EASY (now, when I solved the problem, not before...!!!)
    Insert Micropone or any jack in Micropone Input or Aux Input, on your sound card or motherboard !
    AND NOW YOU CAN USE PREMIERE PRO 2.0
    Enjoy
    Steve - Italy
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4015730#4015730
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4015730#4015730. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Premiere Pro CS4 & Earlier by email or at Adobe Forums
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Running Windows 7 on a 2010 HP desktop and Microsoft 6 to 4 has a driver problem (x) Microsoft ISATAP Adapter 2 has a driver problems (x)

    Microsoft Teredo Tunneling Adapter has a driver problem (x)  What does this mean? How do I fix it?

    Hi,
    Before everything, please create a restore point first.
    Please refer to this link:
    MICROSOFT TEREDO TUNNELING ADAPTER
    http://social.technet.microsoft.com/Forums/windows/en-US/9c1d4c54-4dca-4a42-932d-bfe6ced1c6bf/microsoft-teredo-tunneling-adapter?forum=w7itproinstall
    You may need uninstall the problematic driver first.
    Alex Zhao
    TechNet Community Support

  • Mapped windows drive -  Java performance problem

    I have a mapped windows drive to which I am writing files sized from few kbs to GBs, Now I am facing performance problem.
    Time for writing to local drive file with 4 MB - 1.6 seconds.
    Time for writing to mapped drive : 31 seconds.
    Please give me the ways to improve the mapped drive file access.
    Note I am using buffered streams and all , I am primarly expecting some thing from windows side.
    Renjith.

    I am copying the file from local drive to a mapped drive.
    ovxFileName = filename.substring(attachmentsFolder.length() + 1);
                   BufferedInputStream reader = new BufferedInputStream(
                             new FileInputStream(filename));
                   BufferedOutputStream writer = new BufferedOutputStream(
                             new FileOutputStream(commonLocationForOVX + File.separator
                                       + ovxFileName));
                   String str = "";
                   TimerUtility timer = new TimerUtility();
                   timer.startTimer();
                   int val = 0;
                   while ((val = reader.read()) != -1) {
                        writer.write(val);
                   writer.close();
                   reader.close();
                   timer.stopTimer();

  • Hard drive problem...... Please Help

    Hard drive problems
    I am sure it is due to my error or mistake but I received a new Maxtor III touch as a replacement for my failed drive yesterday after connecting it I went to Maxtor one touch manager software that came with it and the drive did not appear in the window so then I opened disk utilities and copied my notebook hard drive over to the Maxtor ran permissions on each drive and then closed down my system ! today when I opened my Powerbook with the Maxtor on it gave me the grey screen 2x so I disconnected the Maxtor ran permissions again and everything was fine until i power up the Maxtor and Grey screen again! Help How do I fix this?????

    Maxtor one touch III firewire 800 its connected to my Titanium G$ Powerbook I am beginning to think its just another drive failure

Maybe you are looking for