HP 15" monitor need specs for screws

Hi! I lost the three screws that attach my 15 monitor (Part number PK656AA) (Model # HP vs 15) to the base. Could someone kindly tell me the specs of the screws so I can buy them?
HP parts Dep't can not sell them to me as the screws do not have a part number and tech support could not help. I have been on the phone for over an hour.
FYI< I took the monitor off the base and removed the screws when I mounted the screen on a wall mount. Now I have taken it off the wall mount and want to place the screen back on the base but I have lost the screws.
Thank you very much

HPVS, welcome to the forum.
I suggest going to a local computer repair store. I will bet that they have the screws that you need or something that will work.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

Need specs for Satellite C50-A-1DV

Been all over, and have had nothing but frustration from trying to use the cumbersome and largely useless Toshiba 'help' services.
If anyone can help, I need specs for the Satellite i3 C50-A-1DV.
I have looked for an hour now and I can find nothing.
In short, I want to buy new memory - upgrading it from 4 to 8gb - but I can find no info beyond
that it is ddr3.
_Adeybob_

Hi
Googling around I found follow information: Your notebook model can be upgraded up to 16GB.
Compatible RAM modules that you can use are as follow:
2GB DDR3-1600 - PA5037U-1M2G
4GB DDR3-1600 - PA5037U-1M4G
8GB DDR3-1600 - PA5037U-1M8G
Using these part numbers you can find full specification but it must be DDR3 1600MHz.
I recommend you to use compatible and high quality RAMs only.

Need specs for PC to drive 30-inch monitor to full resolution.

Have acquired an HP LP3065 monitor. Now seek to acquire a PC to drive it to full 2560x1600 res. Old Dell Pentium D computer (XP) with integrated video brings it to 1900. Any power supply, memory, MB recommendations would be helpful. Standing by is a Nvidia 8800 GTS video card from BFG Tech that a gamer friend pulled from his system.

Hi shrdlu,
To get that resolution it all depends on the specs of your video card. And if you install a new video card with that resolution capability, you'd want to check the specs of the video card to see how much power is required. If the PC you are using doesn't have a strong enough power supply, you'd need to get one that has more power. I'm not familiar with Dell products so I don't know about your power options. Here are the specs for the video card:
http://www.nvidia.com/page/8800_features.html
...an HP employee just trying to help where I can, but not speaking on behalf of HP.

Need Specs for HP m9150f replacement Case Fan

The case fan in the rear of my HP m9150f computer is getting noisy.I need the specifications of it in order to be able to purchase a replacement such as it;s size and connector.

Hi
Please find the link given below might help you.
http://partsurfer.hp.com/Search.aspx?type=PROD&SearchText=KC880AA
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

LG W2486L LED Monitor - Need driver for Lion

Hi there,
I've got a new MacBook Pro running Lion and when I plug my LG W2486L Display in it doesn't have the correct resolutions / refresh rates available.
Is there are driver that can get this running properly under Lion?
Thanks.

please advice. I dont want to end up hurting my eye.
Thanks,
Neerav

HOW DO YOU GUYS DEAL WITH APPLE.. SO CONFUSING...NEED HELP WITH SPECS FOR PURCHASE OF IMAC 21.5

Hi guys, been reading your forums, blogposts, etc and am getting more confused. I'm just a video girl trying to produce meaningful content through web videos for small to mid sized businesses and want to come over from the dark side.
Good news,, I dont need a super giant system, I do simple editing for web videos, minimal graphics, no motion graphics, no animation etc. currently using CS4, will probably end up with 5.5.
I want to get imac 21.5 or 27 if i have to.. So here's the question we all have,,, what do I really need besides an Apple fairy godmother to figure this crazy stuff out?????
I want to be able to have firewire add on, but the rest is what I need help with. So i've been looking at cs6 specs, even though im not there yet, eventually will be,, so just need to run cs4 now and build from there. I also want to eventually move to final cut down the road so I want imac able to upgrade to final cut.
WHAT DO I REALLY NEED MINIMALLY FOR NOW? WHAT CAN I GET LATER IF i CHOOSE TO DO MORE AND NEED MORE POWER?
cs6:
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8, v10.7, or v10.8**
4GB of RAM (8GB recommended)
4GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
Additional disk space required for preview files and other working files (10GB recommended)
1280x900 display
7200 RPM hard drive (multiple fast disk drives, preferably RAID 0 configured, recommended)
OpenGL 2.0–capable system
DVD-ROM drive compatible with dual-layer DVDs (SuperDrive for burning DVDs; Blu-ray burner for creating Blu-ray Disc media)
QuickTime 7.6.6 software required for QuickTime features
Optional: Adobe-certified GPU card for GPU-accelerated performance
Any responses would be great. I know you guys are busy answering the really high end tech questions

All the current iMac models (both 21.5" and 27" with OS X Mt. Lion 10.8) will run CS4, 5.5 and 6 just fine. They will also run Final Cut Pro X just fine. Ditto for most any application you may want to use.
Below are some notes (specific to your apparent requirements) that may help you with your purchase decision:
Notes on purchasing a 21.5" iMac
All 21.5" iMacs come with 8GB RAM but you cannot add more later. I strongly suggest getting the maximum RAM (16GB) when you order the iMac.
The basic hard drive is a 1TB 5400rpm drive. It will work fine with Adobe CS but you will probably want the added speed of the optional 1TB Fusion drive for better performance. Some people will recommend/argue for one of the optional SSD drives instead, but they are very expensive and still only come in relatively small capacities - I don't recommend the SSD drives. Get the Fusion drive and spend any extra money on a good external hard drive for backup and/or extra storage instead of an SSD.
Notes on purchasing a 27" iMac
All 27" iMacs come with 8GB RAM and you can add more later, up to 32GB
The basic hard drive is a 1TB 7200rpm drive - it will be fine with Adobe CS. There are upgrade options to a 3TB 7200rpm drive or a 1TB or 3TB fusion drive - these will be fine also. There are also SSD drive options, but I do not recommend them. (Same comments as above.)
Notes on all the current iMacs
iMacs no longer come with built-in CD/DVD drives. If you need one, you will need to purchase the Apple Superdrive accessory drive ($79)
All of the iMac graphic processors (GPU's) are compatible with Adobe CS 4, 5.5, 6
It is very difficult to impossible to change or upgrade the hard drive later on, so don't buy low-end thinking you can add a better internal hard drive later.
Be aware that Macs always come with the latest (most recent) version of OS X. And OS X Mavericks (10.9) is due to be released soon (in the next month or two). There is no guarantee that the older Adobe CS 4 or 5.5 versions will run on OS X Mavericks. If you cannot upgrade to CS 6 in the near future, you may want to purchase now rather than after OS X Mavericks is released.
For what it's worth, I'd recommend the 27" iMac if your budget can afford it. You will appreciate the larger screen size and added capabilities over the years you will use the computer.

I need a monitor power supply for HP2711X. Where can I buy one?

I need a monitor power supply for HP2711X. Where can I buy one?
This question was solved.
View Solution.

Because the XP597A3 (actually any of these product numbers; XP597AA, XP597A3, XP597AS) is a HP 2011x 20" LCD/LED widescreen monitor. The OP was looking for an A/C adapter power supply for the HP 2711x 27" LCD/LED widescreen monitor, which is product # XP600AA or XP600A3. The adapter power supply I linked to, is the correct part for the 2711x monitor.... that is why not those other parts.
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Need some technical specs for practice

Can any body send me some sample technical specs for practice. My email id is [email protected] Thanks in advance
bindazme

Hi,
I m not sending you any sample for tech specs but you will
find the tips as below:
1.In 1st page you may require to give heading and company logo also at the RHS.
2.Give title of the document , SAP Module Name, Specification Type (Giv ein a tabular format)
3.Revision History in Tabluar Format including Author , Description , Date , Version ( Version management very imp try to maintain it)
4.Requirement Description : Enter in detail wat is u r reqmt.
5.U may add Process flow diagram using visio etc.
6.Outstanding issues
7.Prerequisites
8.Input Parameter Details
9.Processign logic Details
10.Out Put Details (if Report Output Format)
11.The few unit testing scripts also u can include
12.Proper file name , in header & Footer
13. Always try to keep track changes on for version management. If u need to create new version try to accept previous version then keep track for curren tchanges.
14. Maintain index & Page no in table content .
Kindly Reward points if contents are useful....
Rewards,
Mandeep.

NEED FUNCTIONAL/TECHNICAL SPEC FOR GL CONVERSION

Can someone please email me the functional and also technical spec for GL conversion. I need to give the functional spec to the Abaper to do LSMW.
Any advise and guidance in this regard will be greatly appreciated.
Please send me documentation on the spec sheet for gl conversion. I need to prepare one and give to the technical person by tomorrow. Email it to me at [email protected]
Please send me asap
thanks a lot
Lakshmi

Lakshmi, can you please send me the format of that func spec, if possible?

I use an older Macbook Pro from 2007 with OS X 10.7 – had issues with Mavericks, so I uninstalled it. I want to get a trial version of AE CS6 but I need to know the specs for it.

I use an older Macbook Pro from 2007 with OS X 10.7 – had issues with Mavericks, so I uninstalled it. I want to get a trial version of AE CS6 but I need to know the specs for it.

System requirements | After Effects

Need Driver for external Monitor for Macbook Pro

Does anyone know where I can get a driver to utilize the output from my macbook pro to an external monitor? It works great for my iOS but Windows 7 doesn't recognize any external monitor.

I've never seen an instance where an external monitor needed a driver.
What monitor? Did you download and install the Windows support software?

Need power spec for System Fan Header MSI K9N4 Ultra-F

I need the power spec for Fan Header MSI K9N4 Ultra-F motherboard
I want to use a Panoflow 2.13 Watt fan on the cpu heatsink. Will this
fan burn out the header? I don't have the board yet (it's in the mail - really)
so I can't use MSI Tech Support (I don't have the serial # yet).
thanks
Tomana

Forgot to add fan headers can take at least 6W/0.50A fans.

Need to find out specs for a few CTR units placed ( orders placed on the outlet )

Hi I need a moderator or Lenovo employee to help me find the specs for some units I purchased from the outlet. There is no records of specs on the website. These are CTR ( previously Custom to Order ).

http://support.lenovo.com/en_US/product-and-parts/partsLookup.page
Use this by entering serial and machine type - it will give you full BOM of parts in your CTO computer.
T430s (i7 / HD+ / Intel 520 SSD / 16 GB Ram)
Previous: X60s, Portégé R100

Need videocard that supports dual monitors and Rotation -for PowerMac G5

I'm looking for a videocard that supports dual monitors and Rotation for PowerMac G5. I've got two Dell 2407WFP monitors rotated to 90 -I've been running an ATI Radeon X1900 256 pcie16 but apparently it is over heating -not even exactly sure if that indeed is the case but all the symptoms I've looked up online point to this problem. Anyways -just looking for a card that will do the job -I don't run games -this is just for work machine doing photoshop and related programs. Thanks for any help anyone may have!

Hi-
A flashed card is a WinPC card that has been modified to accept a Mac ROM to provide for Mac compatibility.
Occasionally, soldering and other physical modifications are required.
Without this modification, a WinPC graphics card cannot be used in a MAc.
Without this modification, Mac users are limited to only a handful of used, OEM options.
The Geforce 7800 GS is the only 7800 card that may be used in a G5 (or G4).
The card must have been or be converted to Mac compatibility.
For dual monitors (DVI) the best performance choices are the Geforce 6800 Ultra (flashed or OEM), a rare, but occasionally available Geforce 6800 GT (flashed), an OEM Radeon X800XT (use ADC/DVI adapter on ADC port) a rare and expensive Radeon FireGL X800 (flashed).
These are the only performance oriented cards to offer dual digital display support.
For less demanding graphics work, an OEM Radeon 9650 offers dual digital output.
Other OEM graphics cards will have either DVI/DVI or ADC/DVI.
All OEM graphics cards are only available as used.
All cards are easiest to obtain on eBay.
Prices vary, but deals can be found.
Expect to pay $150-$325 for any of the cards listed.
Any card considered MUST be stated as Mac compatible, unless you are willing to research and learn how to perform the necessary modifications.

Need power adapter specs for WRK54G

I was just given a model WRK54G wireless router that is missing the power adapter. Would someone who owns one of these provide me with the voltage and current output specs for the power adapter? I am guessing that it is 12 volts but would like to avoid doing a smoke test if this information is available. Thanks in advance.

WRK54G 12V 1A BIG BARREL 110~120V

HP 15" monitor need specs for screws

Similar Messages

Maybe you are looking for