Hp 15-r033tx usb driver windows 8

hi i am using hp 15-r033tx lap with 64 bit os ,
recently i changed my os from windows 7 to 8.1
my problem was i cant find drivers for this lap
i am in need of all drivers  for my lap with link address.....
pls hlp me i am looking forward for ur rply...

Hi,
            Download the drivers from the below link for Windows 8.1
http://support.hp.com/us-en/product/HP-15-Notebook-PC-series/6875200/model/7308901/drivers
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

Similar Messages

  • Time Capsule Problem USB Drive Windows 7

    Hello all,
    Let me apologize if this has been covered elsewhere, but I am having trouble accessing a NTFS formatted USB hard drive connected to my Time capsule (firmware 7.4.2) using Windows 7 Ultimate 64. The drive itself works fine as I am able to access it when it is plugged in directly via USB.
    Also, I can see the drive in the 'disks' tab in my AirPort Utility. In the file sharing pane, I set 'Secure shared disks with device password', disallowed guest access, and checked the 'share disks over WAN' box.
    Then I go to Network browser and click on the icon and name of the time capsule, then a Windows Security window pops up and asks for credentials to connect to the time capsule.
    The first account listed is my computer name/user name, but when I enter the device password, access is denied. What user name or password should I use?? Thank you in advance for any advise.

    Hello again,
    Well I plugged in a USB drive which is FAT32 formatted, Airport Utility was able to correctly see the size and label of the drive, but alas, the Windows Security password box pop up again and I still am not sure where I am supposed to set the proper credentials in order to access the drive.

  • Apple Mobile Device USB Driver: Windows found driver software for your device but encountered an error while attempting to install it.

    Hello,
    My iPhone 4 and iPad 3 are no longer detected by my computer, do not sync, and no drivers. I have tried every possible solution from Apple Support and about 5 others forums for the past 5 hours, including:
    -Multiple uninstalls and reinstalls of driver and iTunes
    -Stopping & running the service
    -chaning ports and wires
    PLEASE HELP!. screen shot attached.

    thanks for your reply. i followed everything exactly. when I connected my iPhone after all that, it started "installing the driver" automatically. After a couple of minutes, it failed, just like before. Stuck again. thoughts?

  • Backup Fails to Work "not enough disk space" C:55GB In Use, E:(USB Drive) 233GB Free

    T61, 2GB RAM, C: 100GB Drive, E: 320GB USB Drive, Windows Vista Home Premium
    A month ago I started getting message "Rescue and Recovery does not have enough disk space to perform the requested operation" when attempting a backup from C: to E: (USB Drive).  Ran diagnostics on C:, D: and USB Ports and all passed
    C: 86.76GB  Total   E: 298GB
        31.99GB   Free        233GB  
    Not sure how to resolve issue, should be plenty of space to do backup.              

    I've had the same problem on a T60p and on a W500.  I have been able to get RnR going again by deleting several of the backups on the USB drive and then backing up again.  This puts my system at risk because I have no backup while doing this procedure.  Now recently RnR has been telling me there is not enough space to delete any of the backups.  So I'm limping along by growing the number of backups RnR is configured to keep but I'll eventually run out of space on my USB drive.
    Did you ever get any support or find a solution?
    I'm getting to the point where the amount of space in use on my C: drive is about equal to the free space on my USB drive.  I'm up to around 12 backups and eventually my USB drive really will have insufficient space.

  • IPhone 5 iOS 6.1.4 and Windows 7 x64 USB Driver Issues

    Been pulling my hair out with this one for the last week or so and haven't had any luck finding anything on the forums or the web regarding a solution short of a full reinstall of Windows 7 which I am not prepared to do at this time; so hoping someone here can shine some light on this for me
    I have a iPhone 5 that is updated to iOS 6.1.4 and a recently built Windows 7 64-bit machine. All of my other USB devices function fine (keyboard, mouse, Xbox 360 wireless receiver for Windows, and a Seagate 2TB external USB drive). I've downloaded the most recent version of iTunes, installed successfully and then attempt to plug in my phone to sync. I get the standard Windows *ding* that I've attached a device and 1 of 2 things happens (I haven't been able to determine what causes one reaction to happen versus the other): Windows will successfully install the 'Apple USB Mobile Device Driver' successfully and it will appear under my USB devices in Device Manager. However - iTunes will not recognize the phone and I cannot see it in Windows either. In the 'Devices and Printers' snap-in my iPhone will appear under 'Unspecified Devices' as the 'Apple USB Mobile Device'. The iTunes diagnostics fail to find a connected device so the tests fail. As soon as I unplug the device, the strangest thing happens: Windows will start trying to install a device driver and after a few seconds it will fail stating that the "MTP Device Driver" installation failed because the device was unplugged. iTunes also thrown an error "iTunes cannot connect to this iPhone" throwing error code 0XE8000065 (I've also seen error code 0XE8000085 as well)
    After some finagling, I've managed to get Windows to recognize the device under 'Portable Devices' in Device Manager as an "MTP USB Device" using the generic driver. At this point, I've tried updating the driver and manually specifying the Apple USB driver located in the C:\Program Files(x86)\Common Files\Apple\Mobile Device Drivers which updates successfully but then changes the device to "Apple USB Mobile Device" and moves it under the USB Devices in Device Manager; and Windows nor iTunes can see it even still.
    I've tried removing iTunes several times and ensuring that all remnants of the installation are gone (registry and folders on the installation drive) and have disconnected all my USB devices short of the keyboard and mouse and still I get the same results. At this point, I'm afraid that a re-install of Windows is going to be the solution; but it's a drastic one (I have a SSD drive where Windows is installed along with all of my games for faster load times/better performance and do not want to have to redownload\reinstall all of them) and I'm not prepared to undertake it at this time, which is why I'm posting here
    I've used a utility called USBDeview that sees my phone is connected - so I know from a functional standpoint that my USB ports are good and working. I also know the cable is good too - my daughter's PC (Windows 7 32-bit with NO iTunes) immediately sees the device when I plug it in, installs the drivers, recognizes it as an iPhone and I can then see/browse it in Windows Explorer like I would normally expect. My work PC (Windows 7 64bit, NO iTunes) sees the device just fine as well. I would immensely appreciate anyone that has seen this issue or has any additional solutions I can try.
    It's also worth mentioning that I've never used Kapersky antivirus so the UPPERFILTERS value in the registry that I've seen as a solution on some forums is not present on my machine. I'm using Microsoft Security Essentials as my antivirus (no flaming please lol - it meets my needs and is extremely lightweight, which is why I'm using it on a gaming rig) and it's not indicating any issues. I've also tried running iTunes as an administrator (even though my account is a local admin on the machine) and that does not have any effect either.
    If there is anything I left out, please let me know; and I thank you in advance!

    AphexTwin wrote:
    - no Apple input?
    Of course not.  Didn't you bother to read the TOU of this forum?  This is a USER TO USER technical support forum.  Apple doesn't post here.

  • Connected usb driver is not detected in window 8.1

    hey .....
     HP 250 G3 notebook
    connected usb driver is not detected in window 8.1 after update BIOS software ....my current BIOS software version  F.22 .... so plsss...fix this problem......

    @jeet2113 
    ‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with the Forum's private messaging please click here to learn more.
    Thank you,
    Omar
    I Work for HP

  • How do  I Install Windows 7 on Mac Book Pro via a Bootable USB Drive

    Hi Guys,
    I have a Mac Book Pro 13 inch, Early 2011 Processor  2.3 GHz Intel Core i5 (I initially had OS 10.5.8 which I upgraded to OSX 10.9.4 a few months ago).
    When purchased it, I installed Windows via Super Drive (that being the only time i ever used the super drive). My Windows got corrupted for some reason 2 months ago. Hence, I removed the windows via Bootcamp to perform a fresh install. I discovered my Super Drive was no longer working.
    Thereon I have been trying to install Windows via a bootable USB Drive but am failing to do so. After going through several forums, I have reached the following stage.
    1. Created Bootable Windows USB Drive using Windows USB (http://www.wikihow.com/Create-a-Bootable-Windows-7-or-Vista-USB-Drive). Have used this USB drive to install windows on a DELL Computer
    2. Bootcamp wasnt creating a partition for windows since no Windows Installation disc was being detected in super drive. (Solved it by downloading Toast Titanium and loading the .iso file on a virtual drive).
    3. Boot menu was initially not detecting external drive, so installed rEFIt - An EFI Boot Menu and Toolkit. Now it is detecting the USB Drive.
    Now when I boot from this device, it get a black screen with the message "No bootable device - Insert Boot Disk"
    Request someone to please help me install windows as some softwares which I work with are windows based.

    smartestidiot wrote:
    So my understanding is that my Boot Camp Assistant (BCA), since it does not allow USB installer, it sets NVRAM to boot from Optical Drive. Right?
    Yes.
    So can I change it or update it to another BCA version which supports the same??
    All BCA versions drive the logic based on the Mac Model Identifier. Unfortunately there is no real workaround. .
    Please see https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Early+2011+Optical+Driv e+Replacement/5122
    and https://www.ifixit.com/Store/Mac/Unibody-8x-SATA-SuperDrive-Post-Early-2009/IF16 1-073-2.

  • How to install windows 7 on a macbook through usb drive

    So My Cd Drive is broken, And The only way to install windows is to either delete my whole hard drive and make it so I boot from the bios of the motherboard, but I don't know what kind of key to press to go into the bios of the motherboard once I delete the whole drive, which won't even let me do due tot he fact that I can't insert any other disks, Thanks to my Cd Drive being broken.
    Is there any way I can install windows 7 through a usb Drive? I have a macbook 13 inch unibody 2008 model. identifier is macbook 5,1

    If you want to install using Bootcamp Assistant try these links.
    http://www.apple.com/support/bootcamp/
    https://discussions.apple.com/community/windows_software/boot_camp
    Or, you could install using a virtual machine like Parallels, Fusion, or VirtualBox.

  • Can I use a USB drive to install windows 7 on my Macbook Pro?

    I currently have the Windows 7 iso on a usb flash drive.  I am running bootcamp 4.0.3, and there is no option to create a windows 7 install disk via usb drive.  Also I cannot download the Windows support software.  Is there a direct download to the drivers, or another version of bootcamp that would allow me to install via usb, like the MBA?  Or is there a way to work around this problem?  I don't have access to any writable CD/DVDs so the usb drive is really my only option currently.

    Copy the ISO to your disk and try using that to write the ISO to (another) USB device.
    Instructions for the Air: https://support.apple.com/kb/HT4407
    download a free iso burning program for Mac (we used SimplyBurns Mac). That program runs you through the necessary steps to properly burn the iso file you need. After doing so, Bootcamp recognized the installation file and everything worked as it should.
    https://discussions.apple.com/thread/3410900?start=45&tstart=0
    http://simplyburns.en.softonic.com/mac
    If for some reason you downloaded Windows from Microsoft instead of buying a package with a disc, you need to download the ISO version and burn it to a DVD. See this article on downloading the ISO: http://www.mydigitallife.info/windows-7-iso-x86-and-x64-official-direct-download -links-ultimate-professional-and-home-premium/ (Make sure you choose the ISO that matches the version you bought).
    Here's instructions on burning an ISO with Disk Utility: http://lifehacker.com/251758/mac-tip--how-to-burn-an-iso-or-dmg-file-to-disc And this thread on burning a Windows DVD in OSX: https://discussions.apple.com/thread/2039118?start=0&tstart=0 (Summary: you can use Disk Utility to burn the ISO, but choose a slow burn speed)

  • How can I use an external USB drive on my Macmini with Boot Camp and Lion/Windows 7?

    I have a MacMini (Last model with a disk drive). The Mini has Lion and Windows 7 installed using Boot Camp. I want to attach a 350GB, USB, HP Personal Storage Device (Hard Drive) to the computer and be able to use it in both Lion and Windows 7 mode. The USB drive is formatted for Windows 7. I only want to use it for storage and back-up purposes for both operating systems. It would be nice if I could access the total disk from either system without having to reboot to change operating systems to view Windows 7 files and reboot again to view Lion files. Can anyone offer any guidance or any informational websites to help me? Thank you for any help!!

    Yes, you’ll be able to do that.
    (116841)

  • Can I use a time capsule as a usb drive on a windows 7 machine?

    Can I use a time capsule as a usb drive on a windows 7 machine?

    No, but you can use it as an Ethernet or wireless drive.
    (60698)

  • How can I format toshiba canvio USB 3.0 Hard drive (Windows 7 w/U3 software preinstalled) for mac?

    Purchased Toshiba part number HDTC605XL3A1 - 500Gb USB 2.0 & 3.0 external 2.5-inch self powered hard drive through Amazon. On two different MacBooks (both Core i5--1 Air and 1 Pro) we can't get the drive to show up using Disk Utility nor can we scan for it/see it with any other available tools in Lion or Snow Leopard.
    Any ideas? Toshiba has stopped producing Mac specific USB drives apparently and their technical support can't get it to work. The suggest formatting it on a Windows computer with FAT32 but don't have one easily available.

    Hi, have you checked on System Information to make sure the Mac is actually recognizing the hardware? (type system information on spotlight and click USB on the left)
    I had a simmilar problem with a Seagate Freeagent Go drive. It showed up on the hardware list for a few secconds and then dissapeared as if I had unplugged it, meanwhile the HDD was still on and spinning. Called Seagate and they told me to do a PRAM & SMC reset, this solved the problem, although it still happens every now and then.
    Mac OS X can see NTFS formatted drives too, the only limitation is that it can not write on them (without third party add ons) so I doubt it's a formatting problem.
    I'm not sure if you are having the same problem, but you should give it a shot.
    SMC Reset
    For Portable computers that have a battery you should not remove on your own
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.
    PRAM Reset
    Resetting PRAM and NVRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.
    Your computer's PRAM and the NVRAM are reset to the default values. The clock settings may be reset to a default date on some models.
    Let me know how it goes.
    ps: sorry for my english, it's not my native language!

  • I would like to recover my bookmarks from my old hard drive that I now have as an external USB drive. The old OS was Vista; the new is Windows 7.

    I recently had a new hard drive installed on my laptop; this hard drive has the Windows 7 OS on it.
    At the same time, I had my old hard drive mounted in an SATB enclosure so that I could use it as an external USB drive. [I stupidly did not export my bookmarks before doing all of this]
    Everything seems to work fine [I can see all of the files], but I cannot find out where my bookmarks are stored on the old hard drive.
    Is it possible to find them and get them transferred over to the new hard drive??
    Thanks!!

    Bookmarks are stored in a file called places.sqlite inside the profile folder. You can copy that file from the old profile folder into your current profile folder. For details of how to find the profile folder see https://support.mozilla.com/kb/Profiles or http://kb.mozillazine.org/Profile_folder_-_Firefox
    You can recover more than just the bookmarks - https://support.mozilla.com/kb/Recovering+important+data+from+an+old+profile

  • IPod Nano, Windows, and USB driver quirkiness question

    Hey all,
    I recently helped someone who was suffering from two separate, show-stopping iPod/iTunes problems to get things into such a state that they could actually make use of both. Things seem to be working fine, though one of our solutions seems to me to be a bit less than optimal.
    For the sake of providing as much information as possible, the first problem (though likely unrelated) was the infamous vanishing iTunes installation. We solved this by using the ctrl-alt-delete trick on an iTunes 4.9 installation (that is, by ending all of the install processes when the installation-ending error message shows up.) Okay, that's not the best solution, but it seems to be all that we can do for now.
    The main concern, however, is with the iPod USB driver, and a problem that began with the formatting of the iPod. I can see that at least a few people have had this problem, but here it is for the sake of it:
    The iPod installation software would state that the iPod needed to be formated, and then proceed to sit for a very long time, "waiting for iPod," until it would eventually fail. We solved this using the second technique (uninstalling the iPod USB driver) outlined by Paul Green7 in this thread: William Brame, "Initial formatting of iPod Nano", 02:49pm Sep 22, 2005 CDT
    After doing this, we ran the iPod setup software again, and it told us that the iPod didn't need to be formatted. Obviously this was rather confusing, but upon loading up iTunes, it proved to be true. It appeared as an actual drive in My Computer, and it showed up properly as a 4gb iPod which songs could be copied to without a hitch.
    That is, until the computer was rebooted. After a reboot, the iPod would only be recognized once again as a "USB Mass Storage Device," would not appear in My Computer, and indeed iTunes failed to recognize it as anything other than a 360gb storage device of some unknown sort.
    So, what we found was that every time the computer was rebooted, the driver needed to be uninstalled again, and when Windows booted again the iPod would be properly recognized.
    Now, as I said, this leaves things in a working, if far less than ideal, state. Can anyone think of a more proper fix for this? It seems to me that we've only partially addressed the problem here, and I can't help but think that this may not be the best state to leave things in.
    Also, if nothing else, is there any possibility of ill effects resulting from our currently-employed solution? As far as I can tell, the worst thing about it is that it's merely bothersome, but then, I've had difficult understanding these problems in the first place.
    That said, if anyone can offer any advice, it would be greatly appreciated!

    The key to your problem is more than likely the 360GB storage device. This is a symptom of having either network drives or an external hard drive attached to your computer, and Windows confusing them with the iPod. The solution is to reassign the iPod's drive letter. See this:
    Strange iPod behavior

  • Can't access a USB Drive connected to Time Capsule from a Windows PC.  Apple Care can't/won't assist.  HELP!!!

    Trying to get my Windows 7 PC to access the USB Drive that is connected to my Time Capsule.  I have a Fat32 Formatted USB drive connected to a 2TB Time Capsule and I'm trying to get access to that drive from a Windows 7 PC.  I've attempted to map the network drive (based on some 3-4 year old articles I could find online) but any time I access a file from the PC, the Time Capsule "freaks out" and disconnects all connections to it which forces me to unplug it to restart the Tim Capsule.  I'm at a loss now as to what to do.
    Spent a few hours talking to Apple about this and much more.  Apple Care can't or won't help with this particular problem (the guy I talked to, as nice and helpful as he wanted to be, had no experience supporting their hardware in a Windows environment).
    Someone has to know how to fix this so, PLEASE, help if you can!

    First off, Archon23, what you want to achieve is possible.  I have access to both my Time Capsule (TC) and the USB drive connected to it, from a Win. 7 and Win. XP machine.
    Here is what I see from the Windows side of things:
         From My Computer - TC USB Drive (Y)
         From Windows HomeNet - Time Capsule:
    Now getting there is the trick.
    One caveat before proceeding:  I am not well versed in Windows Networks, Windows Sharing and Firewall settings so some of the following may not be elegant, may not be absolutely required, and may not be the best way of getting there.  But it is what I did to see both the TC drive and it's attached USB  drive on the Windows side of my network..
    1.) First, I added Airport Utility to the Inbound rules of Win 7 Firewall
    While poking around my Network Sharing and Firewall settings trying to figure this out, I got a Pop-up recommending I do that.  AND I did that. Oh, and while you are at it, make sure you have a Home network established. 
    2.) Next, on a hunch, I installed a USB Wi-Fi Adapter (under $20) to my Win PC, enabled that Wi-Fi connection and disabled my Ethernet connection.  I was getting no where on this matter with my Ethernet connection to a DSL Gateway.  But with a Wi-Fi connection to my AirPort Express Base Station, I made progress.
    3.) Finally, while poking around my Network Sharing Center some more, one by one I started the various network device Setup Wizards in there, and Trouble Shooters, to find the elusive TC/USB devices in question...AND voila, it worked.   And it's stable, been this way for going on two weeks now.
    Good luck.

Maybe you are looking for