HP 1510 Series Printer-The Scaner not working in Windows 8.1 Pro N
My OS is Windows 8.1 Pro N,Printer is working fine but Scaner has to big problem and not run,even if i had tried with Print and Scan Doctor but it was fail to splve issue..What i have to do?
Hi,
Please first check the versions of msmpeg2vdec.dll on your and your friend’s computer.
Also, let me know if your install any Windows update or other video player which may change the version of msmpeg2vdec.dll. If so, please remove the video player temporally or restore back to the point system work fine.
If the issue persists, let’s try to replace this file:
To replace the dll file, we need to take ownership of this file and change it. Please make backup to avoid unexpected results.
Take ownership and replace system files:
1. Take administrative ownership of the corrupted system file. To do this, at an elevated command prompt, copy and then paste (or type) the following command, and then press ENTER:
takeown /f Path_And_File_Name
Note The Path_And_File_Name placeholder represents the path and the file name of the corrupted file. For example, type takeown /f C:\windows\system32\jscript.dll.
2. Grant administrators full access to the corrupted system file. To do this, copy and paste (or type) the following command, and then press ENTER:
icacls Path_And_File_Name /GRANT ADMINISTRATORS:F
Note The Path_And_File_Name placeholder represents the path and the file name of the corrupted file. For example, type icacls C:\windows\system32\jscript.dll /grant administrators:F.
3. Replace the corrupted system file with a known good copy of the file. To do this, copy and paste (or type) the following command, and then press ENTER:
Copy Source_File Destination
Note The Source_File placeholder represents the path and file name of the known good copy of the file on your computer, and the Destination placeholder represents the path and file name of the corrupted file. For example,
type copy E:\temp\jscript.dll C:\windows\system32\jscript.dll.
Did your GraphEDT work fine now?
Hope these could be helpful.
Kate Li
TechNet Community Support
Similar Messages
-
Scan not working after windows 10 upgrade."1510 series not detected"
upgraded to windows 10 couple of days back. now scan not working, printing fine.tried updating drivers no joy.Hope HP finds a solution soon.
Well, it has been a long road on the Win 10 upgrade. At first I got the same error message as above, but after deleting the Dolby Advanced Audio v2 in Win 10 using Control Panel Programs and Features and rebooting, I got into the continual BSOD upon reboot. Here are the steps I took to at least get stable on Windows 10. First, I rolled back to Windows 8.1 using the advanced feature in the BSOD recovery options. Once back in Win 8.1, I deleted the Dolby Advanced Audio v2 using Add/Remove Programs in Control Panel. Then I downloaded the Win 10 update and re-installed it. Once that completed, I updated the Intel Graphics driver under the display adapters (on my G780 it is an Intel HD Graphics 4000, and the driver can be found at https://downloadcenter.intel.com/). Currently I am running version 10.18.10.4252 for my machine. Then, under the Device Manager, I updated the Conexant SmartAudio HD driver under the Sound, video, and game controllers. That driver is currently at 8.66.4.50 and was automatically downloaded from the web when I requested to update driver. I also changed several others settings such as Notify to schedule restart after updates are installed instead of automatic (under Settings --> Update & Security --> Advanced Options) and Do you want Windows to download driver software and realistic icons for your devices? --> No, let me choose what to do, never install driver software from Windows Update. After that, I shut down the machine, waited a moment and booted back up. I have no idea why this helped or if it is overkill, but I am stable and running without a fear of rebooting now. Hope this helps if someone else is having this same issue.
-
Brother Printer HL-5250DN not working with my new MacBook Pro - HELP
Hello there, I just purchased a new MacBook Pro - I've had to use PC (yuck) for work and had an IBook which was great until the dog knocked it off the dresser ...... Anyway, so I've replaced it with the Pro and love it - of course. Except......
My problem is this Brother printer (HL 5250DN) which has been an absolute workhorse, but try as I might I can't get this Pro to print - unless I physically hook it to a USB port and print, which defeats the purpose of having a wireless network allowing me to print from anywhere.....
I have tried suggestions from previous posts (unzipping the gz files - resetting the printer) but still nothing works... Any other suggestions - I'm going nuts here and Brother help line can't seem to give me a solution that works... HELP..... I really want to get going (New Years Resolutions and such) on my new projects and am absolutely grounded with this thing....
MacBook Pro Mac OS X (10.5.5)Check the Dell website for compatible printer drivers you can download and install.
Once the drivers are installed, open System Preferences > Print & Scan > Print
Then click + to add the printer.
*** When you post for help, please state which OS X is installed.
If you aren't sure, click About this Mac from your Apple menu
Troubleshooting advice can depend on that information. -
Re: Fingerprint Reader Not Working On Windows 8.1 Pro Startup
Model: ThinkPad Edge E420
OS: Windows 8.1 Pro 64 bit
Problem: Fingerprint reader suddenly stopped working (Image 1). One major change I think which might have lead to this - I had a recent update from Microsoft on 28/Aug/2014 (Image 2). I'm not sure though that this must be the cause of the problem.
Troubleshooting tried: I tried first to repair through "programs and features" but did not work. Then I tried to uninstall and reinstall the FingerPrint reader software (Latest version available on Lenovo Website for my model). Still did not work. I'm pasting photographs of the error. I've tried to follow all the methods shown on various threads on this forum but nothing worked so far....Even the TouchChip (Fingerprint) patch driver for Windows 7 (64-bit) which is compatible with Windows 8.1 doens't install. (image 3). Device manager shows error for Biometric devices. (image 4).
Please help.
Image - 1For Windows 8.1 you should not be installing any fingerprint software. You should uninstall ThinkVantage Fingerprint Software. The driver you need (for TouchStrip Fingerprint Sensor) will come from Windows Update. Then you can enroll fingerprints from the PC Settings -> Accounts -> Sign-in Options screen.
If there is a problem with the device in Device Manager, try removing it and check the option to delete the driver software. Then reboot, run Windows Update, and a compatible version for your system should be installed. -
Hp coolsense not working in windows 8.1 pro
Hi, I have update windows from windows 8 to windows 8.1 pro in my laptop HP Envy 4-1046TX Ultrabook. Now HP coolsense 2.2 has stopped working and my laptop is getting shutdoun due to over cpu heat after 5-10 min. HP coolsense 2.2 is getting installed properly but not working, to cooldown cpu as its expected. Plase let me know how to resolve this issue.
Hi,
Please first check the versions of msmpeg2vdec.dll on your and your friend’s computer.
Also, let me know if your install any Windows update or other video player which may change the version of msmpeg2vdec.dll. If so, please remove the video player temporally or restore back to the point system work fine.
If the issue persists, let’s try to replace this file:
To replace the dll file, we need to take ownership of this file and change it. Please make backup to avoid unexpected results.
Take ownership and replace system files:
1. Take administrative ownership of the corrupted system file. To do this, at an elevated command prompt, copy and then paste (or type) the following command, and then press ENTER:
takeown /f Path_And_File_Name
Note The Path_And_File_Name placeholder represents the path and the file name of the corrupted file. For example, type takeown /f C:\windows\system32\jscript.dll.
2. Grant administrators full access to the corrupted system file. To do this, copy and paste (or type) the following command, and then press ENTER:
icacls Path_And_File_Name /GRANT ADMINISTRATORS:F
Note The Path_And_File_Name placeholder represents the path and the file name of the corrupted file. For example, type icacls C:\windows\system32\jscript.dll /grant administrators:F.
3. Replace the corrupted system file with a known good copy of the file. To do this, copy and paste (or type) the following command, and then press ENTER:
Copy Source_File Destination
Note The Source_File placeholder represents the path and file name of the known good copy of the file on your computer, and the Destination placeholder represents the path and file name of the corrupted file. For example,
type copy E:\temp\jscript.dll C:\windows\system32\jscript.dll.
Did your GraphEDT work fine now?
Hope these could be helpful.
Kate Li
TechNet Community Support -
Fingerprint Reader Not Working On Windows 8.1 Pro Startup
My fingerprint reader doesn't seem to work on Windows login anymore (no light on the reader and it doesn't accept any fingerprint) in the past couple of days so have to login using a password. The fingerprint reader works fine in the BIOS and also when I go into the ThinkVantage Fingerprint Reader application i.e. it asks me for a fingerprint. Has this happend to anyone else and has this been caused by a specific MS patch in the last monthly patch cycle?
I have reinstalled both the ThinkVantage Fingerprint Software 64bit (v 8102) and the TouchChip Fingerprint Coprocessor driver (v 1.6.1.341).
I'm running a W530 and fully patched Windows 8.1 Pro
Solved!
Go to Solution.I downloaded the driver from Lenovo, uninstalled the Lenovo Fingerprint Software, restarted, installed the driver package which actually reinstalled the Fingerprint Software and it worked straight away without re registering my fingerprints. The strange thing is that it stopped working out of a sudden. I couldn't figure out, what caused that....btw the same happened to my bluetooth settings the other day. booting into BIOS, exiting without changing, restart and bluetooth was there again....hmmmm
-
Photosmart Printer solution centre not working post windows 8 to windows 8.1 upgrade
I have a Photosmart Wireless e-All-in-One Printer - B110a
after upgrading to windows 8.1 from windows 8 the solution centre stop working
i have uninstalled the software and down loaded new software from the hp website
the download extracts but when i click on the install button i get the message
the system cannot find the file specified
have tried running with anti virus turned of
i have uninstall all hp software and reinstalling
i have reinstalled windows 8 and reupgraded to windows 8.1
tried to reinstall the software all with the same result it extracts but when i click on the install button i get the message
the system cannot find the file specified
there seems to be several people with similar problems, is there any solution to thisPersonnel Message Sent
JonW
I work for HP -
How can I get Acrobat 7 Pro to work with Windows 8.1 Pro?
Apparently Acrobat Pro 7 is not compatible with Windows 8.1 Pro X64. I am trying to save a web page to pdf but this feature does not work in Windows 8.1 Pro. Is there a patch or update that will fix this problem?
It might be possible to get a lot of it working, but you will have to install a separate PS driver and rename it Adobe PDF and set the port to File. The print process is then to print to the Adobe PDF printer and then open the created file in Distiller to complete the process. I have been successful with this on a Win7, 64-bit system, but not tried it on a Win8 system. You are pretty much on your own if problems arise, unless you are willing to try wild suggestions that we might give (guesses really).
-
Print & Scan not working.
Drivers also cannot be uninstalled from the system.Hi,
Download and run HP Print and Scan Dr utility from link below to troubleshoot the issue.
www.hp.com/go/tools
Although I am an HP employee, I am speaking for myself and not for HP.
--Say "Thanks" by clicking the Kudos Star in the post that helped you.
--Please mark the post that solves your problem as "Accepted Solution" -
The print control could not work?
Hi,
I want to set my characters upside down in my smartforms,and i got something from the net about print control.I used the print control 'COL2V' in 'CNSAPWIN'.
But when i printed this form,it seems the print control did not work.So,anyone who could help me?If you Google COL2V you'll find that this is a control for ABAP List for "inversed" font, which is not upside down, I believe, but just the color inversion (e.g. white on black background).
There are many questions on SCN regarding the text rotation (use Search) but since even SAP delivers a bitmap where a rotated text needs to be in the Smartform, I doubt there is such option through the print controls. -
The print tab does not work in mapquest
The print tab does not work in mapquest
You are on the right track to getting the printer installed regarding firewall but perhaps it has saved in a different port on your computer than can communicate correctly. Search Devices and Printers on the Windows 8 PC so you can pull up the printers' folder. Do you see the Officejet 6500 in here (meaning have you installed it again)? If you do not see it here, check your Print Server Properties and make sure the driver is not in here either, if so remove it. Restart the Print Spooler. Make sure you uninstall it completely and shut down the PC (see video link on how to uninstall HP drivers and restart the print spooler in Windows 8 if needed).
Remember to re-install the Full Feature Software and Drivers (for your OS and region) when the PC reboots. Try the test print and if it does not print:
1. Right-click on it and select Printer Properties.
2. Under the Ports tab make sure you see the printer's IP address here or a serial number. Sometimes the HP network -rediscovery ports can be tricky.
3. When the printer is high-lighted in this window, click Add Port.
4. Select Standard TCP/IP and follow the rest of the prompts in the Wizard to enter in the printer's current IP address.
5. Try to print.
If this does not help you, you may have other computer problems.
Have you ever installed a printer on this PC before?
What is the name of the anti-virus software you use?
Are you on a server, proxy, or other elaborate wireless setup?
Answer those questions for me please if the above information does not help you. I will do my best to assist.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution! -
My finger print sensor is not working properly since a drink was spilt into the keyboard. When booting up, it automatically "fails" 5 times in a row (without any attempts to swipe a finger), then defaults to password entry to boot the machine's hard drive.
This is not a problem and all i want to do is disable the finger print sensor, but cannot work out how to do this. I've tried uninstalling the driver, which I seemed to do without any problems, but when rebooting, the sensor still seems active, and still goes through the same process.
Everything else works fine and this is just a minor niggle, but I'd like to remove the annoyance of it beeping at me 5 times while it does its thing!
Can anyone tell me how I completely disable it?
Thank you.Have you removed the fingerprint software? If yes check if in device manager is listed some unknown device. Please post the result.
Maybe you can try to disable this unknown device and it will not be recognized as new hardware every time when you start the notebook. -
After updating my mac to the new operating system I have had several problems. Now my printer program is not working.
Do you have any suggestions?Start by telling us what printer you hope to use.
Look at the printer manufacturers site to see if they have a 10.9 print driver.
Assuming you have tried to delete & re-add the printer it's possible that the model is no longer supported.
You can also try the printing system reset…(I think 10.9 is the same as the Lion instructions).
http://support.apple.com/kb/HT1341
If the model is supported you should be able to add it & the driver will be downloaded. -
Hello,
I have a serious problem with my Photosmart Premium C310 series with the scan(ner). I get a black image with white stripes (or an error 30) when I save my picture or my document on Mavericks (Mac OS X 10.9) installed yesterday.
With Moutain Lion all was OK.
My HP Scan is 2.4.3
Model name : CN503B
Serial Number : {Private Information Removed}
An update is planned as soon as possible ?
Thanks in advance.
ValorisaHello
Can you please advise what software you are using to scan ? HP Scan app or Image Capture or Preview ??
I think you are using HP Scan app, yes ?
Did you know you can also scan using Preview or ImageCapture ? You might try this as a test. Make sure printer is turned on and available on same network as your Mac.
Open up Apple's Preview app from your dock. Under File menu, select "Import from scanner", you may have to do this twice to get printer to show up. You should get a scan dialog window with many options to help you scan and save the file.
Please let us know if this works, I'd like to know if the issue is with the HP scan software or something else.
If this reply helped you, please say thanks by clicking the blue Kudos star.
I am an HP employee -
HP deskjet D2300 series driver not working in windows 7
This procedure is much too complicated for an average user. You know that millions of Wondow XP users are switching to Windows 7. I' sure that most of them are facing similar problems. HP should come with a user friendly solution that solves the above issues. Don't you think?
My problem remains unsolved.Hi dvh,
Welcome to the HP Forums!
I see that your HP Deskjet D2300 series driver not working in windows 7.
Do you see any error messages with the installer? Or does it just close out and doesn't install?
In the meantime, please try using our HP Printer Install Wizard for Windows.
Hope to hear back from you, and have a great day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!
Maybe you are looking for
-
Please give me the name of the connector for the laptop. Is it a "display port"?
-
Unable to highlight text in my PDF files
Iam unable to highlight text in my PDF files ,The tool shows in the toolbar and i am able to select it .But when i go to the related text which i wish to highlight ,nothing happens . kindly advise, what am i doing wrong. The comment tool is working
-
Why are the text and graphic elements are not showing on the iPad
I have a slideshow of pictures full bleed on my inDesign document with text and graphics on top of the pictures (not part of the slideshow). When I preview on the iPad all I can see is the gallery of images? Is it not possible to put text on top of a
-
Hi, we have applied vtm patch for the database, changing the o_h from 11.2.02_Q311 to 11.2.0.2_Q112 (311--3rd quarter 2011, 112-- 1st quarter 2012), the patch went fine and the database was up and running. The pfile was located in different folder an
-
Where can i find the games tab for my ipod 3rd generation on itunes 10?
i am trying to get games on my ipod 3rd generation but i cannot find the games tab!