HP 1536 printing problem when using the charger

On printer, scan HP 1536, when I print manualy the copy is perfect.But when I use the charger, I have two vertical lines on the copy.Somebody can help me to solve this problem.thank you in advance 

Take a look at this link from HP. Take a good look at the ADF Glass strip for any foreign matter.

Similar Messages

  • I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4) A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

    I have problems when using the camera on my iPhone 4S (the same for my daughter with a iPhone4)
    A veil around the blurred photo, a development impossible and completely unable to read the bar code or QR code. What to do?

    Sounds kind of stupid, but check to make sure that your iphone case cover is not blocking the edge of the camera lens.  I had a silicone case on my 3S and when it got older, it started tot slip and the edges of my pictures were blurred.

  • There is no printer output when using the PrintOut method

    I have a VB6 app with CR XI, and a customer found a situation that when printing a report directly to the printer using the PrintOut method, there is no printer output or error message.
    Some reports using the same code print normally, but a report that is preceded by another print call, presents this behavior.
    And when the output is directed to the screen, we can see the report.
    Could someone give me an idea of what is the problem?
    Thanks,
    Isis
    SP - Brazil
    The code used is below:
                       Set rpt = applic.OpenReport(App.Path & "SEFoto" + TipoRPT + ".rpt")
                       rpt.FormulaSyntax = crCrystalSyntaxFormula
                       rpt.FormulaFields.GetItemByName("Empresa").Text = "'" + Company + "'"
                       rpt.FormulaFields.GetItemByName("Idioma").Text = "'" + Idioma + "'"
                       rpt.FormulaFields.GetItemByName("Versao").Text = "'" + Versao + "'"
                       ' ... Some lines to compose the selection formula
                       rpt.RecordSelectionFormula = Cond
                       ' To evaluate the image length:
                       Arq = rsTMP3!FT_Arquivo
                       ImageScaling = FatorDeReducao(Arq, "F")
                       ' To reduce the image length:
                       AchouOLE = False
                       For Each oSection In rpt.Sections
                           For Each oObject In oSection.ReportObjects
                               If oObject.Name = "PictureFoto" Then
                                  Set oOleObject = oObject
                                  AchouOLE = True
                                  Exit For
                               End If
                           Next oObject
                           If AchouOLE Then Exit For
                       Next oSection
                       With oOleObject
                            .Suppress = True
                            .XScaling = ImageScaling    ' 0.5 = 50%, 1 = 100%
                            .YScaling = ImageScaling
                            .Suppress = False
                       End With
                       Aguarde.Show 1
                       If DestinoRel = 9 Or DestinoRel = 1 Then ' Padrão ou impressora
                          rpt.PrintOut True              ' <<<---- Here using true or false nothing happens
                       Else
                          PrintRPTtela rpt, "Fotos"   ' <<<--- Here it works fine
                       End If

    Hi Isis,
    Not sure if you have applied any service Packs to CR? If please do so and test again. Then you can upgrade to CR XI R2 for free, use your XI Keycode and download Service Pack 4 from this link:
    https://smpdl.sap-ag.de/~sapidp/012002523100011802732008E/crxir2_sp4_full_build.exe
    You'll find the distribution files for your app also from that same download area.
    If you don't want to upgrade to XI R2 then download all patches from XI and test again. This issues rings a bell that it may have been fixed.
    Thank you
    Don

  • Forms 6i prints ugly when using the Forms print command from the menu

    When we use the Oracle Forms print built-in to print the screen-shots, the print-out turns out to be ugly with lots of dots all over.
    We are using Forms 6i (6.0.8.11.3) running on 9iAS on Windows 2000. The version of JInitiator we are using is 1.1.7.31. The forms open up in a separate frame.
    The interesting thing is when we print from a Windows 2000 machine, the screen-prints are OK. But they are messed up when we use a windows 98/95 machine.
    Any suggestions folks? Thanks

    Craig Bagley1 wrote:
    Any clues? I don't find anything in the Finder Help files to explain the Print command's use.
    If in the Finder I pull down the "Help" menu and type "Print" in the "Search" box, I see one "Menu Items" entry and five "Help Topics". If I click on the one for "Printing a closed document", it shows information that discusses printing one document at a time. I don't know if it's possible to print more than one document that way.
    Try this: Open the "Print & Fax" panel of System Preferences. Drag the printer's icon from the list on the left onto your Desktop. The result will be an icon that is an alias for the printer. Now try dragging several documents onto that icon.

  • MB90 print problem when using print preview

    Dear Expert,
    We have print problem using transaction code MB90.
    After input data on transaction MB90 and then we choose print preview.
    Output document will be displayed, then the problem occurs, print icon and print menu are grey out.
    Please your advice.
    Thanks and Regards

    Hi,
    Just to check, is the Printer configuration complete?
    http://wiki.sdn.sap.com/wiki/display/Basis/HowtoConfigurePrinterin+SAP
    http://help.sap.com/saphelp_nw70/helpdata/en/d9/4a971d51ea11d189570000e829fbbd/content.htm
    http://basissap.blogspot.in/2008/06/how-can-you-configure-printer-explain.html
    Regards,
    Srikishan

  • Printing problems when using automatic document feeder (HP Photosmart 309C)

    When I print using the normal paper trays, everything comes out fine.  However, when I feed a document through the automatic document feeder, it comes out with four vertical lines running down the page.  I have tried cleaning the rollers, but that has not worked.  Anyone have any ideas/solutions?  Thanks in advance, Jack.

    When I print using the normal paper trays, everything comes out fine.  However, when I feed a document through the automatic document feeder, it comes out with four vertical lines running down the page.  I have tried cleaning the rollers, but that has not worked. 
    I see that this post was made in June of 2010, but there was no reply. I found the solution elsewhere:
    Lift the scanner lid. You will see the main glass and a small glass about the width of a ruler. There are a couple of dots of debris on that small glass. Line up the lines to find them and clean with a bit of glass cleaner on a rag or napkin. The reason a small dot makes a line is the paper passes by the scanner with adf rather than the scanner passing by the paper on flatbed scans.

  • Authorization problem when using the Transaction Launcher

    Hi All,
    We have an authorization problem when we call a transaction (EL37) in ECC from the IC Web Client.
    We believe that we have done all the necessary customizing in CRM and when we press the link in the Navigation Bar we are asked to logon to our ECC system. After logging on, we get an error message saying that "You do not have authorization for transaction EL37". If I then enter the transaction directly in the white command field in top of the ECC screen, then I have no problem calling the transaction.
    My user has SAP_ALL, so it shouldn't be a problem with the authorizations. Maybe it has something to do with the transaction IC_LTXE? I have also tried to add this transaction to my user profile, but that didn't help.
    Does anyone have a suggestion for how to fix this problem?
    Kind Regards,
    Gitte.

    Hi,
    I have found the solution for the problem myself. The transation code in the Transation Launcher Wizard must be written in capitals! We had entered 'el37' and have now changed it to 'EL37'.
    Best Regards,
    Gitte.

  • I am experiencing problems when using the calendar minimonth function which causes the operation to freeze up.

    I have, for a couple of months now, experienced a freeze up, and the firefox not responsive when using a date search box like when trying to pick a date for getting a hotel room or booking a rental car. I noticed that I had a message box that had been coming up telling me about unresponsive script detailing something like chrome/calendar/minimonth. I could not find that in my computer anywhere. It happens with ie as well. Any thoughts? This is driving me crazy.

    Klaus,
    Thanks although you didn't know the answer somebody out there did and I cannot believe how simple the issue was - assign a name to the computer through System Preferences>Sharing
    excellent result, it's really nice to stop banging my head against that brick wall
    Stuart Mcf

  • Printing problem when use multiple printers

    Hi to all,
    we are using printing through multiple printers in the network, after u start the machine if u use one printer it is ok, when the time u start printing with another printer the problems start like it starts from middle of the page or it prints half of the page then it leaves balnk remainig. etc. the printers \we are using are one is EPSON LX-300+ and another is HP Laser 1200. we are using orginal softwares suppliers by the prinnters.. Oracle reports developer6 is the reports.
    any one has got experice in this.
    Thanks in advance..

    Can you access page1 and page2.jsp correctly on their own?
    ie could the problem be with page2.jsp rather than the import command?

  • Have problem when using the Software Update...

    My network works well and when I found there are updates in itunes iPhoto and some other software, I manually open the Software Update, and after the bar "checking for new software" it always says "software update doesn't have any new software for your computer at this time". So I have to install 10.6.2 and 10.6.3 manually, and now my system version is 10.6.3, I have this problem since 10.6.1, and now I found there are so many software telling me they need updates, I can't do it manually because it's boring. So could anyone tell me what's the problem with my Snow Leopard? Thank you very much. I don't want to reinstall the whole system.

    Thank you.
    But as I found the two files, I deleted them, then I restarted my MBP, and the problem was still there... The software update showed the progress bar and it checked for a while and then tell me that there are no updates...
    Message was edited by: JohnShu

  • Problems when using the Dynamic processor effect?

    Thanks in advance for any help.
    I am using adobe audition 1.5 on a windows Xp pro machine. Whenever I go to process an audio file with the dynamic processor effect, (after it is processed) The audio file is broken up or corupted. Auition will let me "undo" and I can retry the same process over and over until randomly it works. Any idea's?????

    vit1 wrote:
    Operating system developers hope for your answer.
    This is a user-to-user community support forum. We are not RIM employees, but volunteers who enjoy assisting other users. RIM personnel rarely comment on queries posted here. You would have noticed this in the message upon registration.
    #1 - don't know. What format?
    #2 - Correct. Others have noted this.
    #3 - Notepad, the third party application? Or are you referring to creating an entry in Remember?
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Problem when using the Http TimeOut system parameter in JDK 1.4

    Hi,
    The JDK 1.4 URLConnection class seems to be caching the timeout values in JDK 1.4. Hence this result in a inflexibility of setting the timeout value once for the entire functioning of the JVM. The sample code is below
    public class TestUrlConnection {
         * main method
         * @param args
         public static void main(String[] args) throws Exception {
              try {
                   System.setProperty("sun.net.client.defaultReadTimeout","1000");
                   System.out.println("Testing Connection Timeout Parse I");
                   URL url =
                        new URL("http://localhost:9080/StrutsApplicationWeb/timeOutTest.do");
                   HttpURLConnection conn = (HttpURLConnection) url.openConnection();
                   System.out.println("Conn Type:" + conn.getContentType());
                   System.out.println("Conn Encoding:" + conn.getContentEncoding());
                   System.out.println("Conn Resp Code:" + conn.getResponseCode());
              } catch (SocketTimeoutException se) {
                   System.out.println("Timeout parse I");
              try {
                   System.setProperty("sun.net.client.defaultReadTimeout","25000");
                   System.out.println("Testing Connection Timeout Parse II");
                   URL url =
                        new URL("http://localhost:9080/StrutsApplicationWeb/timeOutTest.do");
                   HttpURLConnection conn = (HttpURLConnection) url.openConnection();
                   System.out.println("Conn Type:" + conn.getContentType());
                   System.out.println("Conn Encoding:" + conn.getContentEncoding());
                   System.out.println("Conn Resp Code:" + conn.getResponseCode());
              } catch (SocketTimeoutException se) {
                   System.out.println("Timeout parse II");
    The server is a URL that produces an delay of 20 secs. Hence as per above code the first parse should fail but the second one should succeed. As URLConnection is caching the timeout value, the code is not functioning properly. Do you guys think, it is ok for URLConnection to cache timeout values???

    that is odd. I thought I saw the source to
    HttpURLConnection once, and the default timeout is
    hardcoded in the code, so there was no way of setting
    the time out. maybe right, i saw that setting a system property the second time dint seem to alter the value, but made the mistake of assuming that the connection picked up the timeout value first time from the system property the first time it was defined
    >
    1.5 changes this.setConnectionTimeout(int)

  • Performance problem when using CAPS LOCK piano input

    Dear reader,
    I'm very new to Logic and am running into a performance problem when using the CAPS LOCK-piano-keyboard for input of an instrument: when I'm not recording everything is fine and the program instantly responds on my keystrokes, but as soon as I go into record-mode there is sometimes a delay in the response-time (so I press a key and it takes up to half a second longer before the note is actually played).
    Is there anything to do about this to improve performance (for example turning of certain features of the application), or should I never use the CAPS LOCK keyboard anyway and go straight for an external MIDI-keyboard?
    Thanks and regards,
    Tim Metz

    Does your project have Audio tracks and just how heavy it is, how many tracks? Also, what kind of Software Instrument do you use?

  • Disable print output when using bapi BAPI_GOODSMVT_CREATE

    Hello,
    I am using BAPI BAPI_GOODSMVT_CREATE to post material documents in our programs.
    I wish to prevent the print output of the documents created by the BAPI.
    Meaning - when the user post good movement using MIGO, there will be a printout of the movement, but if the movement is created using BAPI_GOODSMVT_CREATE, no output will be printed.
    I have tried sending blank values in fields VER_GR_GI_SLIP & VER_GR_GI_SLIPX in GOODSMVT_HEADER structure, but to no avail.
    Is there a way to disable printing ONLY when using the BAPI?
    Thank you very much.

    Hi,
    We cant restrict the print preview or print out of the material document. Once the condition record has maintianed for the material document, it ll applicable for all the material doc . It would be manual Gr or BAPI GR.
    In your case Print is coming automatically or user is taking the print !!
    Regards,
    Dhanush.

  • Display "?" when using the sqlplus

    hi
    I met a strange problem when using the sqlplus . It is as follows :
    [oracle@LinuxOracle oradata]$ sqlplus /nolog
    SQL*Plus: Release 10.2.0.1.0 - Production on Mon Sep 10 10:21:27 2007
    Copyright (c) 1982, 2005, Oracle. All rights reserved.
    SQL> conn / as sysdba;
    I chose the default character set as installing the oracle10gR2 on the Rhel4U4 .
    anybody who can help me to solve this problem ,many thanks
    carl

    addtional imformation
    I used 'dbca' to create a database and chose the default character set .
    the language I want to display is simple chinese.
    who can help me ?
    carl

Maybe you are looking for

  • Write/read image to avi file, VI works incorrectl​y from the second run

    Hi everybody, in my labview I write image from IMAQ USB to avi file and read image from avi file, the VI runs correctly at the first run then after that it goes wrong, I can write/read only one frame and it terminates automatically. Does anybody know

  • BUSINESS AREA OR PROFIT CENTER BEST FUNCTIONALITY

    HI, TO ALL FRIENDS OUR COMPANY HAS 23 SALES OFFICES.SO CAN BODY CAN ADVICE METHAT BUSINESS AREA IS GOOD OR PROFIT CENTER. AS COMPANY NEED BALANCE SHEET FOR  EVERY SALES OFFICE SAPERATELY. WAITNG FOR YOUR SOONER REPLY THANK YOU IN ADVANCE. Moderator:

  • Xmlcg

    I was under the impression that xmlcg would provide both set and get methods for each of the elements/attributes. However this does not seem to be the case as only set and add methods are generated. Please would someone confirm this and also mention

  • "the application AppleMobileDeviceHelper quit unexpectedly"

    hello, everytime i attempt to sync my iphone, i am met with this error message "the application AppleMobileDeviceHelper quit unexpectedly".  i cannot find support anywhere online, who else is experiencing this?  thank you!

  • Update Datasource-Component in VC

    Hi, i've changed my backend-function-module. This serves as a data-source in VC. But the function modules parameter do not change in vc. even if i delet the data-source component in vc and drag it again on  the workspace there has nothing changed. I