HP 2000-425 NR DVD vs. Blu-Ray

Is there a Blu-Ray Burner / Player you can swap for the standard Multi DVD unit? I just bought a 2000-4245NR and would like to upgrade it.

Hi and thanks for joining HP Forums. I was able to find one Blu-Ray ROM/DVD Writer that HP currently sells. This is an external device and can be used on most machines. You can purchase this product here:
http://shopping.hp.com/en_US/home-office/-/products/Accessories/CD-DVD-and-Blu-Ray/QC257AA?HP-bd530s...
Thanks.
I am an HP employee.
Please post rather than sending a Private Message. It's good for the community and I might not be able to get back quickly.- Thank you.
Please click the White Kudos star on the left to say thanks.
Please mark Accept As Solution if this resolves your issue.

Similar Messages

Blu ray drive no longer recognizing dvds or blu ray discs

Until about a week ago I was able to read cds, dvds, and blu ray discs with my dv6 product number lm720av. Windows 7 64 bit. I put in a disc recently and it tries to read the disc for a couple of minutes before it stops trying and shows no disc in the drive. I looked online and it looked like there were other instances of this happening but no one had a solution. It can read cds but not dvd or blu ray at this point. I tried uninstalling the optical drive via device manager and it uninstalled no problem then windows automatically found the drive and reinstalled the drivers which did not change the results. I saw online people were suggesting running sfc under administrator mode in the command prompt. No change. Does this mean my blu ray diode failed? I see two lenses in the drive, is one cd and the other a combo dvd/blu ray? Any other suggestions?
I am about 3 weeks out of warranty on this laptop.

Hi,
The following procedure will test if your notebook can start from a bootable disc in the CD/DVD drive - the advantage of trying this is that it will rule out any possible Windows driver error as the CD/DVD drive is under the control of the Bios when starting the notebook. So if you find that the notebook will not boot from the DVD, then it's almost certainly a Hardware fault in the optical drive itself and it will need to be replaced.
Using another PC to create a Windows 7 Rescue CD and DVD. Download the ISO from the link below.
Windows 7 64bit
You need use an application such as ImgBurn to correctly burn the ISO to a DVD - a guide on using ImgBurn to write an ISO to a disc is Here. Once created, insert the DVD and then restart the notebook and see if it boots from this disc - if it does, let the first screen come up ( this will show repair options etc ) then just remove the DVD and restart. If the notebook will not boot from the DVD, it will just load straight into Windows, in which case, just remove the DVD.
Let me know.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Can anyone explain how I go from a Sony HD camcorder .m2ts file to viewing the video in HD on either DVD or Blu-Ray?

I have recently started to edit footage taken on a Sony HD Camcorder using iMove 11.
Uploading the .m2ts file was no problem straight from the camera to iMovie, but I (stupidly) assumed that I could burn an HD DVD from iMovie/iDVD to view on a DVD player. I've done a bit of internet research to find out why the quality of the DVD is so bad i.e. SD rather than HD and I think I understand it. Just.
Further searching to find out our to convert AVCHD/.m2ts to either HD DVD or Blu-ray has boiled my brain. So much stuff I read was a couple of years old so I wasn't sure what is possible.
Can anyone tell me how I get to the point where I can upload the .m2ts to the iMac, edit the footage and burn a Blu-Ray or HD DVD?
Cheers!

Booted the Mac this morning and it now works. I tried Alchroma's solution but whether the stereo is Plain or Matrix, it works both ways. I don't think that this was the solution as a result, but thanks for the suggestion. To confirm, my Easy set up is HD / AVCHD Apple 1920 x1080i60, the only thing I can think I did differently compared to yesterday is that I shut my Mac down having changed the Easy setup. Previously, I only changed the easy setup then closed FCE4 down.

When is the next Trade and Save DVD to Blu Ray??

I have been to the store twice when they were offering 5 bucks trade in money for dvd to blu ray. And both times the offer was expiring that day and it was late. I have a bunch of dvd I want to upgrade to blu rays. Anyone here have an idea when the next one might come up? I dont see anything about it online, just that the last one expired last month or so.

Hello LateralusGT!
The Upgrade & Save program is a great way to get rid of some of your standard DVDs and upgrade to Blu-ray, and I’m very sorry that you’ve missed out on the promotion in the past!
Unfortunately, I don’t have any information right now as to when the next one is going to be, but be sure to keep checking BestBuy.com as well as our weekly ads to find out as soon the promotion begins again.
Sincerely,
Matt|Senior Social Media Specialist | Best Buy® Corporate
Private Message

Burn DVD or Blu-ray Final Cut 10.1.1

Whenever I burn DVD or Blu-ray Final Cut 10.1.1, it comes without audio. The video runs perfect, however dumb, without any audio.
This started happening after I updated to version 10.1.1 on Mac OS 10.9.2 Mavericks.
What is happening. Any information?

Yes, these two files are there, but the AC3 file does not run, even there. Is as if caught. The video file plays normally.

HELP!How to create HD disc that will play back in HD DVD or Blu-Ray player?

Footage comes from Panasonic HVX200 as DVCPRO HD 1080i60, all appropriate settings made in FCP5 to edit. Have already made SD DVD, whoopie.
Now client is interested in real HD version that they can play back on HD DVD or Blu-Ray set top unit. Of all my research, I've discovered little about how to make a "real" HD video disc. OSX doesn't support Blu-Ray burning, OK. What about HD DVD burning support? And what drive to purchase for this application?
I understand DVD Studio will allow me to author a disc with HD content...that I can burn onto DVD5. Useless to the client. Need to burn on either Blu-Ray or HD DVD media.
Aside from encoding in Compressor, what do I do when I need to make this HD disc happen? Compressor step seems easy enough to figure out. Just very unclear on how to burn out appropriate video disc.
Thanks for your help.

For Blu-Ray creation:
I'm curious if DVDit! works in parallels too, though it will certainly work in BootCamp. The question is what format should FCP/Compressor output to in order for DVDIt, etc. on BC or Parallels need in order to create the disc?
MPEG-2 and H.264 should work, but who knows?
In the meantime, I have HDV source footage that I edit. I print the final edit back to HDV for archiving, and burn a HD-DVD on a DL DVD+R red laser disc to show on my Toshiba HD-DVD player using DVDSP. It works, and I can get about 40 minutes of MPEG-2/HDV on there without transcoding at 1080i and it looks fantastic.
In the future, I hope to be able to dump the HDV final edit onto a Blu-Ray disc. I'm guessing Adobe Encore will be needed on the Mac for that.
The point here is there certainly are options that work. I do wish Apple added Blu-Ray burning capability.
There's still room for that, however... FCS 1 (and even now 2, with AVCHD support, albeit non-native) have histories of adding new support for codecs, etc. in free updates.

Adobe Premiere Pro Help | Exporting to DVD or Blu-ray Disc

This question was posted in response to the following article: http://helpx.adobe.com/premiere-pro/using/exporting-dvd-or-blu-ray.html

Exactly what are you Exporting?
How are you burning your BD?
Are you doing the authoring in Adobe Encore, the authoring program, included with PrPro, since CS 3?
If you are using Adobe Encore, and having issues with the resulting BD (Blu-ray Disc), then I would post the full details of your Project, and steps taken, in the Adobe Encore Forum: http://forums.adobe.com/community/encore/encore_general
Good luck,
Hunt

Can I create subtitles in Encore on videos specifically for web (not DVD or blu ray)?

I have a premiere pro project in Spanish and would like to add English subtitles with the final product being an MOV or MP4 file with permanent subtitles to upload to vimeo and embed on a website. Is this possible in Adobe Encore? No DVD or blu ray will be created.

Burned in subtitles are done in Premiere with the titler.

Exporting an Apple ProRes before compressing for SD-DVD or Blu-ray (or AVCH

Hello,
this is my question:
does exporting a sequence to an Apple ProRes Self Contained file helps to gain quality when compressing for SD-DVD or Blu-ray (or AVCH disc)?

Thanks for answering, Tom.
Let me try again, though. (Also, just thinking about the footage, forgetting about effects, titles, etc.)
Do you think that this applies to DV-NTSC and HDV sequences?
I've compared a DV-NTSC sequence exported out using:
DV-NTSC compression and one -using Apple ProRes.
They do look different. Wouldn't you agree to this?
What about HDV,
- is it erroneous to think that (when capturing) by transcoding to AIC or ProRes you are gaining some quality?
- or if you already capture HDV natively, it doesn't make a difference to export an ApplePro Res version to make a SD-DVD from?
I am concerned with this, because I shot once some HDV footage at night with a Sony Camera, going to a hard drive, and when I transcoded the files from the hard drive to use in FCP, (using MPEG streamclip) I noticed a relevant difference in how much the noise was noticeable on the HDV compressed files vs. the apple ProRes compressed files.
Have you ever seen these differences?
Thanks!!!

HD-DVD or Blu-Ray?

I am looking for feedback and advice about using HD-DVD or Blu-Ray for burning HD disks.
Costs, software compatibility, other?
Please share your experiences.
Thanks,
Blaine

Blaine wrote:
... Please share your experiences.
for about a year, you're able to buy ext. BR-burner (~900$), Verbatim BR-media (20$ each), and Toast 8 which claims to handle BluRay ..
BUT... I've read on NO Mac-related-board (here or anywhere...) wether those homebrewn-BR-disks are compatible/playable on BR-standalone-players (~1200$) .. or, if Toast just generates BR-'data'-disks.. which would make such disks only useful with computers.. and for those needs you could create h264-HiDef-data dvd-r ...
Apple is partner in the BluRay consortium.. but, none of the early adopters with the fat wallets share their insights on 'HiDef to BR-r to BR-standalone' ... I assume, there's no working solution for that ...

Converting NTSC DVD to Blu-ray or PAL DVD

Why doesn't Encore allow me to change a DVD project to a Blu-ray project with the ability to choose the frame size and rate, or to change an NTSC DVD to a PAL DVD? It looks like the option is there, but they are grayed out.
I exported my Premier Pro CS3 project for NTSC DVD, PAL DVD and Blu-ray, hoping to simply change to Encore CS3 project type, and then replace the assets with the appropriate file/format exported from Premier.

>Maybe worth a feature request for CS5?
God in heaven - NO!
As Joe just pointed out, these are 2 completely different TV standards, running on different frame rates at different resolutions.
The results of attempting this "on the fly" with menus etc would very closely resemble a dogs dinner.
>I would therefore guess that you are stuck with copying the menus and other such assets into a new Encore project for each output format.
That won't work.
NTSC is 720x480, PAL is 720x576. They have different PAR as well.
If compliance is what you need, then design your menus in Square Pixels at 720 x 540, and resize the image (in PS) to the required TV standard before importing into Encore. 16/9 is worse, as you need to use different designs for each TV standard. There are no short-cuts.
Asset preparation should be done
i outside
the authoring application, never
i in
it.

Mike Hailwood documentary on DVD or Blu Ray?

The Mike hailwood documentary 'An Ordinary Hero' was very good.
Is it or will it be available on DVD or Blu Ray?

I would never turn an xbox on its side. I know it is only dangerous to flip it while the disk is spinning but it just seems like asking for trouble to me.
Crystal
Superuser
Forum Guidelines | Terms & Conditions | Community Guidelines | What is a Superuser?
*Remember to mark your questions solved and click the star to give kudos to show your thanks!*
While I used to be a Best Buy Employee, I no longer have any affiliation with Best Buy.
My opinions do not in any way shape or form represent Best Buy's Official decisions.

Encore freezes when I change from DVD to blu ray

When I open Encore, or link from Premier pro CS4, and change from DVD to blu ray Encore freezes completely. Not even alt - ctrl - del works.
Everything works fine when making DVD's, the problem comes when trying to change to blu ray.
Has anyone seen this problem, - what can I do?

Welcome to the forum!
Please search the forum for "Roxio fix". Apply the pxengine patch and try again.
-Jeff

DVD/CD/Blu-Ray Drive on HP Pavilion DV6 not working....

HP Pavilion DV6 with Blu-Ray
The DVD/CD/Blu-Ray drive suddenly stopped popping open or being recognized. I need to double check that there is nothing else I need to try to fix before having to buy a replacement part.
I've already tried....
1. reseting my computer back to factory settings (I know I had a virus or malware and then when it died I just decided to set the whole thing, but it didn't fix the dvd drive)
2. Removed cd. (I had to remove the drive to get the cd out. It was a library cd so I thought that the security strip on it might have caused a problem.)
After these two things it still isn't working. Everything else is fine. I just want to make sure there is nothing else I need to try or check before buying a replacement part.

Hi RavenMidnight,
For the DVD/CD/Blu-Ray drive no longer ejecting, there is not much troubleshooting that you can do to resolve the issue. I have included the document 'Opening a Stuck CD or DVD Drive Tray (Windows 7, Vista, XP)'. This document will show you two ways as a work around for opening the drive. When you do have the drive open, double check to make sure that there are no obstructions in the path of the tray.
If there are not obstructions, and the tray is still not functioning properly. I have included the document for 'Steps for Removing and Replacing the CD or DVD Drive'.
Please let me know if any of these steps have resolved the issue, thank you.
I worked on behalf of HP

How do I add a second dvd burner (blue ray) to a HP Pavilion 500-023w?

I have a fairly new Pioneer dvd blue ray burner that I would like to install in my HP Pavilion 500-023w. It is currently residing in my old XP machine, also a HP Pavilion. I guess that there is a different front panel that will acept a disk drive ?? The plastic front plate just below the installed drive is very large and will have to be completely removed to install any thing. I know this pc only has a 300 watt power supply, but I will only be using one drive at a time anyway. (Worked well in my old Pavilion...also a 300 watt supply!)
Any one know how to get a drive into this machine? The drive is a Pioneer BDR-S07XLT. It has a SATA interface. I will probably need updated drivers for the drive as it says that it works in Windows 7, XP and Vista.

Thuis video is of some use:
http://www.youtube.com/watch?v=dXk5sPvSdD8
You only have one 5.25 inch optical drive bay so you are going to have to remove the existing drive and replace it with the one you want.
Specs
The video shows how to add a pci-e card but does show opening up the unit. It looks like you need to remove the power supply, unbolt the optical drive and slide it back and out of the case. Replace it with the Blu-Ray drive. You will not need drivers but you will need software to play Blu-Ray movies. You can actually modify VLC media Player for free to play Blu-Rays. Just google a bit and you will find out how.
Good luck.
If this is "the Answer" please click "Accept as Solution" to help others find it.

HP 2000-425 NR DVD vs. Blu-Ray

Similar Messages

Maybe you are looking for