Hp 2000 laptop Network controller is the problem,

please i need the driver of this pc help me cause am not accessing internet, ether wireless or any the driver that is missing is Network Controller please assist me.

How are you connecting to the internet, via wireless network or are you phsyically plugged in? Let's do some basic tests: Some info gathering:
Go to Start > Run > type "cmd" than OK.
Type "ping 8.8.8.8" (test connectivity to Googles DNS server).
Type "ping yahoo.com" (test DNS).
Type "ipconfig /all"
Provide the output here.

Similar Messages

Ethernet Controller + Network Controller + PCI Device PROBLEMs

Hi~! I got tired of finding solution to this one, or let's say 3 problems in one. I reformat this laptop due to it's slow and lagging state. When I'm done reformatting, it's wifi button doesnt work and stayed orange light which means it's off.then I'v e tried connecting it to the router via cable (i forgot what it's called) then stil it doesnt work.. I checked also Device Manager and found them having " ! " exclamation point. Ethernet Controller, Network Controller and PCI Device problem. which I found it will never work.. Now, I did look for solution through the internet and found some but still didn't work.. I need help.! product name: HP 2000-219DX Notebook PCOS: windows 7 home premium Hope you can help me out.. I highly appreciated that. -Marie

Hi: These are the drivers you need for those devices in the order you posted them in the subject line... This package provides the Realtek Local Area Network (LAN) Driver that enables the Realtek Network Interface Card (NIC) Chip in supported notebook models that are running a supported operating system. File name: sp52421.exe This package contains the driver installation package for the Realtek RTL8188CE wireless LAN Controller in the supported notebook models and operating systems. File name: sp52212.exe This package contains the driver that enables the Realtek Card Reader in supported notebook models that are running a supported operating system. The card reader enables users to read from or write to supported removable storage cards, which are typically used in digital cameras, digital music players, and cellular phones. File name: sp52186.exe

Can't connect to GSM networks - What's the problem ?

I am using a iPhone 5 (US/Verizon model) in Canada with a Telus pre-paid sim card and am having connectivity issues
At times it connect to the GSM network and is operational for about 24-48 hrs. Then, it either displays "No service" or "searching" in areas that clearly have connectivity.
In addition to the problems reported on this thread, I am also experiencing an additional issue - that being that the phone seems to not be able to get past the SIM unlock screen.
Specifically, I changed the default Telus SIM PIN code from 0000 to another number. when I power off/on the phone I am not able to get past the SIM unlock screen.
I have tried resetting network settings, toggling Airplane mode and soft reseting the phone to no avail
As with others, am interested to know if this might be a hardware issue or something that could be fixed by verizon, or a software update by Apple.
Also cross posted to the Apple Discussions Forum thread on the same topic https://discussions.apple.com/thread...rt=15&tstart=0

The Verizon iPhone 5, is a CDMA/GSM World Phone. Which means if one is roaming outside the US, the phone can connect to both CDMA and GSM network. Furthermore, as the phone is sold GSM UNLOCKED by Verizon, one can insert another carrier's nano-sim and have it work on their network to not be charged roaming charges
References of interest:
http://support.apple.com/kb/HT3939#iPhone5
A1429 - (GSM and CDMA model)
http://www.apple.com/ca/iphone/specs.html
CDMA model A1429*: CDMA EV-DO Rev. A and Rev. B (800, 1900, 2100 MHz); UMTS/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz); LTE (Bands 1, 3, 5, 13, 25)
http://www.huffingtonpost.com/2012/09/25/verizon-iphone-5-unlocked-att_n_1909972.html
Verizon iPhone 5 'Unlocked' Feature Is Here To Stay: Carrier Will Let iPhone Owners Switch To AT&T
....The Verizon version of the iPhone 5, which went on sale Friday, came with an unexpected feature: it works on the network of AT&T and many other phone companies, as well as on Verizon's....

Can't extend network: AE models the problem?

checking out some other messages I searched out here, I suspect I may have the problem figured out, more or less, but need to figure out how to be sure:
I have 5 airport expresses, bought at different times, that make up a home network designed to play music via a pair of speakers attached to each AE, and one main is attached to a cable modem.
This works ok, though I get a lot of dropout as complained about by many others here, not consistent enough to blame my other electronics in the house, although who knows what the downstairs neighbor might have that is interfering.
Hoping to improve the robustness of the system, I tried to set up the AE to extend the network rather than just join it, but got a lot of error messages when airport utility was trying to 'configure main network' to accept an extension via this airport. I did type in MAC addresses for each additional devices into the main (modem connected) AE settings, under 'allow clients', and it seemed to reset with that data accepted/intact. I just couldn't 'extend' via the clients as I added them.
Which AE models are configurable to extend a WDS network? And does it matter which of them is the 'main' and which are the 'relay' devices? And can I interrogate the AE to tell which model they are or do I have to squeeze into their nooks and try to read the very fine print on them?
I really only need one of them to do the 'relay' thing to the printers, and if one of them is compatible with that function and the others were not, it would save a lot of time to know which one it is, or that I have to replace just that one.

Which AE models are configurable to extend a WDS network?
Both the 802.11g (Model# A1084 / Part# M9470LL/A) & 802.11n (Model# A1264 / Part# MB3211LL/A ) AirPort Express Base Stations can be configured for a Wireless Distribution System (WDS) to extend their network wirelessly. However, depending on which model you have, the configuration steps to do so are different.
There are basically two "flavors" of WDS: static & dynamic. The 802.11g models can only support static, and the 802.11n models can do either. In the case where you would use mixed versions, only the static option is available.
A static WDS allows for a main, relay, and remote base stations in the configuration. It is better suited when you want to cover a long linear distance ... like a rectangular-shaped building. On the other hand, a dynamic WDS only allows for a main and (multiple) remote base stations. This is better suited for those situations where the main would be in the center and you wanted to extend the network outwards to other rooms. Think of a star pattern.
And does it matter which of them is the 'main' and which are the 'relay' devices?
The "main" should be the one connected to the Internet.
And can I interrogate the AE to tell which model they are or do I have to squeeze into their nooks and try to read the very fine print on them?
The simplest way would be to use the AirPort Utility and check which firmware version a particular base station is using. The 802.11g models use v6.x; the 802.11n models use v7.x.

TS4268 Is there a real fix to get iMessage and FaceTime working with iOS7 on my iPad? Tried that 8.8.8.8 and time rest thing but they don't. Everything else works.... Says the network connection is the problem but only for these two programs.

Is there a "real fix" to get iMessage and FaceTime working? Tried the 8.8.8.8 and time,rest thing. Passwords and Apple ID are ok. At log in the message says it's a network connection.
Any ideas? Is here a fix coming from Apple?

Apps are on my iPad and worked fine with iOS 6. When iOS7 was loaded, I can no longer sign in to these two apps using my Apple ID. These apps are on my phone and work fine. This problem is on on my iPad.

Not sure if this is my phone or network that's the problem, but I keep getting messages saying I don't have any voicemails. Any help to make it stop will be appreciated!!

I'm not sure if this is an issue with my phone or with Vodafone, but I am getting a message every minute to tell me I don't have any voicemails. I'm pretty sure it's not spam as it comes from my normal voicemail number and doesn't show as multiple messages. Any help would be greatly appreciated as it's driving me mental!!

voicemail is a carrier feature, not an Apple feature, contact your carrier.

Need network controller driver.

I need a network controller driver for my laptop as the wifi is not working at the moment. The only thing with a yellow exlimation mark in the device manager under other devices tab is the network controller. the hardware id's are as follow:PCI\VEN_168C&DEV_0036&SUBSYS_064211AD&REV_01
PCI\VEN_168C&DEV_0036&SUBSYS_064211AD
PCI\VEN_168C&DEV_0036&CC_028000
PCI\VEN_168C&DEV_0036&CC_0280

The first both devices: Ethernet and Network controller are LAN and Wlan card.
If you want to know more details about these devices, I recommend you to check this Toshiba document:
[How to identify an unknown device |http://aps2.toshiba-tro.de/kb0/HTD0302U00000R01.htm]
In such case it should not be a big problem to get the right driver.
Regarding the PCI Simple Communications Controller
Check this FAQ:
[What is a PCI Simple Communications Controller?|http://www.mytoshiba.com.au/support/items/faq/222]
You need Intel(R) AMT Management Engine Interface driver

Network Controller driver for T42p not working

We have a T42p (type 2373-HTU) that had a new copy of WinXP Pro installed on it, wired network is working but wireless is NOT working.
In Device Manager, the network adaptor is showing up as working and it is (Intel PRO/1000 MT Mobile Connection) working fine on a wired connection. The Bluetooth works when you Fn-F5 it on. My problem is that the Network Controller has the infamous yellow question mark on it and I have been through every single driver on the Lenova site for this particular laptop (2373-HTU) and none of them work. I did follow the install instructions and still have the same problem. I assume this is why the wireless networking is not working. I do have an icon in Control Panel for Wireless Network setup wizard. There is no off/on switch for wireless on this model. I have been in the BIOS and there is no way to turn wireless off/on in there either. As far as I know ... this particular model does have a wireless card installed.

Welcome to the forum! These were the original specs of your T42p:
P M 745, 1GB RAM, 60GB 7200rpm HDD, 15 UXGA(1600x1200) TFT LCD, 128MB ATI FireGL T2, CD-RW/DVD-R Multi-Burner(slim), Intel 802.11b wireless, Bluetooth/Modem, 1Gb Ether, UltraNav, Sec Chip, 9 cell Li-Ion Batt, WinXP Pro
The driver, presuming you're running XP:
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/1rwc89ww.exe
After downloading and extracting the driver, you must go into C>Drivers>Win>Wlanint and run the setup file from there.
Quite a few users have reported issues with Intel 2100B card under XP SP3. You may want to consider getting a newer card, they are quite inexpensive nowadays.
Good luck and keep us posted.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

Network controller driver x64 d004tu

Dear Sir/Ma'am,
I am using Windows 7 Home Premium on my laptop and I am currently not able to connect to the internet.
I looked up the Device Manager and I found that the drivers for Network Controller is missing.
Where can I find the drivers?
Thanks for the help.
Best Regards,
Chetan.
This question was solved.
View Solution.

Hi:
I don't know what model wireless card your model uses, so please do the following steps and I will figure that out and see if I can find the correct driver you need.
Since there is no wireless driver installed, there should be a device labeled Network Controller in the device manager under an Other Devices category. The network controller device will have a little ! mark next to it.
So, find the network controller device, click on that and then click on the Details tab.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that list and select the third item (Hardware ID's).
Post the top string of characters you see in the window.

When I look at gmaps pedometer website on my laptop's LCD screen the streets are all washed out and the gray background is not visible - Why?

When I connect my laptop to a monitor - the problem is not there. I can see local streets clearly because the background color is gray and the streets are white - Any ideas as to why?

Try to disable hardware acceleration in Firefox.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
See also:
*http://kb.mozillazine.org/Websites_look_wrong
*http://kb.mozillazine.org/Images_or_animations_do_not_load
Try to reset the page zoom on pages that cause problems.
*<b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
*http://kb.mozillazine.org/Zoom_text_of_web_pages
Can you attach a screenshot?
*http://en.wikipedia.org/wiki/Screenshot
*https://support.mozilla.org/kb/how-do-i-create-screenshot-my-problem
Use a compressed image type like PNG or JPG to save the screenshot.

My HP Deskjet F4280 printer won't work with my new HP 2000 laptop w/ windows 8.1

I have a HP Deskjet F4280 printer. I recently bought a HP 2000 laptop. I put the printers install disk in the laptop to set up my printer but it says windows 8 doesn't support that printer! It also does say that windows 2000, XP, Vista are supported on the disk for the printer...help! Is there a work around?

Hey Alyssa426,
Welcome to the HP Forums!
Since the installation disk does not support Windows 8.1, I would suggest trying to download, and install the drivers directly from the HP Support website. I have included a link to the 'HP Deskjet F4200/F4224 All-in-One Printer series Full Feature Software and Driver'. Once the software is downloaded, open the software, and follow through the on screen instructions for installation.
Please let me know the outcome of installing the software.
Thank you.
I worked on behalf of HP

Yellow mark - PCI Device" and "Network controller" on Satellite A100-787

There is a yellow mark in the device manager for a driver called "PCI Device" and also for "Network controller" although the network connection (LAN) is working well and all other functions of the computer seem to be working well.
What are those devices??

Regarding the LAN driver, it is installed and working properly (the wired one). The wireless driver is provided by Atheros which I installed from its own setup file and it didnt give me any error so I assume it is installed well although I havent tested the wireless connection yet. I am going to do that shortly.
As for the PCI device, the card reader is able to read Sony memory stick and one type of SD card with certain teeth arrangement but not another card with a different teeth type. I dont know why it is the case. so this remains a mistery to me.

My ipad will only charge on my mac bookair but not on my sony vaio? what can be the problem?

anyone please?? i hav an ipad 2 and it dosent charge when i plug it into the wall outlet or my sony vaio laptop, what can be the problem?????????????? when i plug it in it saids not chrging by the battery bar, but once i plug it in to my mac book air it charges normally???? please help

The iPad should have come with a 10w charger...it is the same charger as used with the iPad 2. The charger and iPads are interchangable. If the two of you can share the parts, you take the MacBook and husband the charger you should be able to manage the charging.
If you have lost or misplaced the chargers, then it would be best to buy another to avoid conflicts, afterall, it is Valentine's Day and best to avoid conflicts

Driver needed for Network controller,PCI Device,SM Bus controller

Need helpt to get the drivers for win 7 64 bit for Network controller, PCI Device,SM Bus controller, Universal Serial Bus controller, PCI Encryption/Decryption controller

Hi: For the smbus and usb 3 controllers, download and install the amd chipset drivers and reboot. http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064 PCI device: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-141812-1&cc=us&dlc=en&lc=en&os=4063&product=7174407&sw_lang= PCI Encryption/Decryption controller: Download and run this driver. Then you have to manually install it. http://h20566.www2.hp.com/hpsc/swd/public/detail?swItemId=vc_133833_1 To manually install the driver, go to the device manager, click on the PCI E/D Controller needing the driver. Click on the driver tab. Click on update driver. Select the Browse my computer for driver software option and browse to the driver folder that was created when you ran the file. That folder will be located in C:\SWSetup\sp66974. Make sure the Include Subfolders box is checked and the driver should install. Then reboot. Network controller...need the hardware ID for that because I don't know what model wireless card your model has. Since there is no wireless driver installed, there should be a device labeled Network Controller in the device manager under an Other Devices category. The network controller device will have a little ! mark next to it. So, find the network controller device, click on that and then click on the Details tab. Now you see a Property drop down list and it is defaulted to Device Description. Drop down on that list and select the third item (Hardware ID's). Post the top string of characters you see in the window.

I am installing itunes to a laptop and have not sync device to this lap. It is saying that it must first restore device. The problem is I have over 2000 pictures and don't want to lose them. Now my phone is in restore mode and I don't know what to do. I

I am installing itunes to a laptop and have not sync device to this lap. It is saying that it must first restore device. The problem is I have over 2000 pictures and don't want to lose them. Now my phone is in restore mode and I don't know what to do. I don't want to proceed and loose these very important photos of family. What do I do to get it out of restore mode? My phone will not allow me to do anything to it at this point. I have the itunes downloaded on the laptop now. When I push the button for the phone it just shows Itunes and plug. I can't even call or open phone up.

Unfortunately... Once the Device is asking to be Restored with iTunes... it is too late to save anything...
See Here > http://support.apple.com/kb/HT1808
However... Once you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766
Jessica Sanchez wrote:
I am installing itunes to a laptop and have not sync device to this lap. ...
Using a computer, other than the one you have regularily been Syncing and Backing up to, was the begining of your issue.

Hp 2000 laptop Network controller is the problem,

Similar Messages

Maybe you are looking for