HP 2000 Notebook - No sound and some slow motion in video playback

I had plugged in headphones while watching a video on youtube.
The video on youtube suddenly got snow and stopped playing and the sound in the computer  stopped working as well. The sound icon has a red X.
The system is not detecting any problem.
I am not computer savvy so need simple steps please.
I checked the speakers, tried to update the software but no software update needed.
I have tried rebooting.
My last option is to do the recovery which I do not want to do.
PLEASE HELP!
Also the DVD player sometimes do a slow motion play while doing T25; it wasn't doing this before. I thought it was maybe how it was but its not.

Hello cbabos,
I see that you are having a no sound problem on your computer. I would like to help with this issue but I need some information.
Can you provide the model and product number of the computer? Here is a link that shows how to find that information.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

  • Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2.

    Hi, I had recently purchased ipad3 and but obviously have been having issues with heating up and some minor issues with video playback etc. Apple has agreed to replace my device. I need help in deciding whether i should get a new ipad3 or opt for ipad2. Seller is willing to replace it with ipad2 as well..
    Have also heard that the ipad3 revamped version is around along with the mini pad rumor..too much information - lot's of confusion pls help

    Lindsay,
    Your iBookG4 is still a pretty awesome Mac. Like already said, it has the power to run Leopard, but it depends if you have an internal DVD drive.
    Then I suppose you have to add up the cost of the OS, perhaps another 512MB RAM, iLife 08 and replacements for any favourite apps that you currently use (Leopard breaks a lot of stuff, but Intel breaks even more). Compare it to the cost of a new MacBook, which wil have all of that included and be 3-4x faster too.
    It also depends on what you want to achieve with your iBook. My PMG4 still cuts it today, I still use it in preference to my new Mac Pro, It's about the same age as your iBook, and I'll only stop using it when it becomes "painfully" slow. My 1 year old son currently uses the Mac Pro (parts for a Mac Pro are easier to replace than those for a PMG4).
    I think your choice is simple, if you can a cheap copy of Tiger, use that, it'll get your iPod Touch up and running. It came in DVD and 4 CD version (by request).
    Leopard will work for you too but a lot of the best eye-candy requires quite a meaty graphics card and you may need a RAM upgrade and replacement software - OS9 Classic is not supported in Leopard.

  • Notebook PC Sound and Audio

    Notebook PC Sound and Audio

    Hello surya94,
    Welcome to the HP Forums!
    I understand there is no sound coming from your computer anymore. I can do my best to assist you. Please try all of the steps in this document to re-enable sound on your computer: No Sound from Speakers (Windows 8)
    Please let me know what happens after these steps are completed. If there is still no sound, try connecting a pair of headphones or external speakers and see if sound will come out from those. Thanks!
    Mario
    I worked on behalf of HP.

  • How can slow-motion iphone6 video be exported to imovie on an iMac and retain its slow motion effect ?

    how can slow-motion iphone6 video be exported to imovie on an iMac and retain its slow motion effect ?

    thx, i can't see where you do that (access the function to slow the motion of a clip).  in the help file it says to 'right click' on the clip to access those functions but when i do i get these optios below (no motion, pan, zoom, pan and zoom).  i want access the speed/duration sliders.
    i would say the function isn't available at all, but i could be looking in the wrong place (although i have tried everything).
    thx for your reply.

  • Mail 4.1,not playing "new message" sound, and some sent mail not in outBox

    For some reason, no "new message" sound is being played (has been like this for a few weeks), and some (~1/10) sent mail does not show up in the sent box (been like this for a long time).
    And yes, preferences are set to "play new messages sound"
    Any ideas?

    I would guess that's an IMAP account, go into mail preferences and select advanced tab for that account and uncheck use IDLE command and the new mail sound should work.
    Not sure about the sent mail problem.

  • My Many Irritations (story) and a New Solved Problem (video playback)

    This topic is just going to ramble through the many things that have irritated me about my iPod since the purchase only three weeks ago. Don't get me wrong, though, I still love the thing. For the most serious problems, check out Numbers 3 and 11.
    Lets see... where to begin...
    I originally had no interest in the iPod, but some time after the unveiling of the fifth generation's new capabilities a friend of mine started talking about it quite a lot. And so, some time in early November, my hype for the video iPod had grown greatly. I downloaded Videora iPod converter and started converting music videos like crazy.
    By the time December rolled in I had successfully converted almost all of my 150 or so music videos and imported them into iTunes. With Christmas coming up I was wondering if I should just ask for it as a gift, but impatience set in and I bought it on the fifth of December, and have greatly enjoyed it since.
    Sounds peachy, but there's a fair bit that I left out.
    Number 1. I love viewing movie trailers on Apple's website. But with the recent update to the quicktime software, it was required to get the updated version. With that came iTunes, a program that was at the time unwanted and an irratation.
    Number 2. Videora iPod Converter has it's fair share of bugs. While I successfully converted many a video with it, I found it would 100% of the time fail to convert files of the .wmv format (Windows Media). As well, I would later find a more serious problem.
    Number 3. On the first day of using the iPod I had a serious error. I had been watching videos just fine all day, and the iPod was working perfectly. I then chose a video to play and inexplicably the iPod froze. These are the symptoms: black screen, backlight on, no responce from controls.
    Tired, as it was the end of the day, I was unwilling to go to the computer room and attempt to find a solution online. And so, I gambled that the backlight would drain the battery and hoped that upon a recharge, everything would be fine. As the backlight was illuminating my bedroom, I put the iPod in it's sleeve to dim it a bit and went to sleep.
    As you can imagine, this was kind of scary. I was afraid that I had bricked my iPod on it's first day.
    In the morning, the battery had died and I was able to recharge it by syncing it with my computer. After charging, I tried a few videos and then tried the offending video. Again it froze, but this time I was confident that the backlight would drain the battery and it would be fine.
    I then looked at the folder wherin I had saved the converted video. Among all my other videos was the offending one. I played it in Quicktime 7, and everything was fine until I realized the length of the video was double what it should be. After what should be the end of the music video came two minutes of a white screen. The file size was also abnormally large, compared to the other videos.
    It turns out that Videora iPod Converter can sometimes produce corrupt files, and these corrupt files will not be detected by iTunes as corrupt. Such files can be trasferred to iTunes and to your iPod without any error or problem, but will lock up your iPod when played. Now, when converting batches of videos with Videora, I scan the file-sizes to see if any are abnormally large; after all, using the same settings on a batch of similar in length videos should produce files of similar size.
    It occurs to me now that the method for resetting the iPod might have worked as an alternative to draining the battery.
    Number 4. I should mention that the battery life on this thing was (for me) unexpectedly low when playing videos. I'm not saying that mine is defective or anything, but I just found that the battery runs down pretty quick when playing videos; quicker than I had thought it might. Not a big problem, though.
    Number 5. In a search to find something to convert my .wmv videos to an iPod compatible format I found the ImToo converter. It works quite well, but the trial version is limited to videos of five minutes or less in length. I'm considering paying for the full version, but if someone knows of another reliable .wmv converter, I'd be glad to try that. For now, ImToo is good enough as most music videos are less than five minutes long, but I do have some other videos in the .wmv format that I would like to transcode.
    Number 6. In mid December I went out of town for three days. Of course, I brought along my new favorite portable media player. Not surprisingly, the battery soon ran low and I was without my computer to recharge it. So I went out to a store and bought Apple's official USB Power Adapter. I thought it was kind of expensive, especially considering that they used to be BUNDLED with the older iPod models, but I was happy to find I would now be able to charge my iPod. Wrong. Something that was not made obvious to me by the package description (if it is even mentioned there) is that the darn thing needs the USB cable that came with the iPod. It does not come with one, and so if all you have is a wall socket, the USB Power Adapter, and an iPod, you're screwed. Unless it's the iPod shuffle, which apparantly is the only thing that works with the USB Power Adapter out of the box. As far as portability goes, I feel this hurts. I would have liked to keep my USB cable attached to my computer. After all, it is a pain to get to the back of my computer and keep plugging it in or unplugging it.
    Number 7. I'm rather irritated with certain aspects of the iPod's interface considering music videos and regular song files. I spent a good amount of time adding artist and album tags to all of my music videos. These tags make sorting the videos in iTunes much easier.
    First, the iPod's interface does not allow for the search of videos through album tags, but does through artist tags.
    Second, going to Music>Albums> gives a long, cluttered list of Albums because of all of my music videos and one-hit songs that belong to only one album each.
    I suppose there is a workaround.
    Number 8. I recently bought another accessory for my iPod. The LOGiiX Amplified Fold-Up Speakers. A very attractive and portable set of speakers for the iPod. It comes with a little stand that holds the iPod in place, and works off of either 4 AAA Batteries or AC Power. Yet again, this is a product that DOES NOT come with the power adapter. Now, I think I MAY have one somewhere in my house... perhaps the power adapter that CAME WITH my SONY MD that is being replaced with the iPod will work....
    Oh, and that little clip-on stand I mentioned? I expect it to be lost soon because when I fold up my portable speakers there is no way to clip the stand onto the outside of the speakers.
    Now, as far as portability goes, I have to carry with me (at the most) seven things: the iPod, the headphones, the USB connector, the USB power adapter, the fold-up speakers, the little stand, and an AC power adapter.
    Number 9. Minor irritation in my control of the clickwheel. After this long, I still accidentally select the wrong thing, and often take a fair time to get the highlight where I want. Meh, this one I'll figure out eventually.
    Number 10. There was something irritating about entirely forgetting my login for my Apple ID and having to create this brand new one for today.
    Number 11. Just today, I have come across a problem with the video not playing. I watched one video just fine, went to the Videos>Movies> tab and, as mentioned above, accidentally highlighted a video I did not wish to play and hit the Select button. Normally when this happens I wait until the video has loaded - when the screen goes black and the white Play symbol appears in the top left. But this time, I immediately hit the Menu button to go back to the Movies tab. The video's loading was interrupted and I went back to the Movies tab.
    Now, when I select and play ANY video, after a noticable but short wait the screen goes black, another noticably longer wait and the play symbol appears, and then a black screen for a few seconds and the iPod skips ahead to the next video, which behaves in the exact same way.
    I have powered down the iPod using the method of holding the pause button, but the problem persits.
    My music videos can be played as songs by finding them under the Music tab, but no videos play as videos.
    I am not at my home computer, and so running iPod updater or just trying to sync is not an option right now.
    I will soon try to reset the iPod using the method described on Apple's support website.
    EDIT Okay, the reset did the trick. Videos are playing fine now. I still want to share my iPod story, so I'll leave this here, but have changed it from being a question. Below are the instructions I followed for the reset.
    RESETTING THE IPOD
    1. Toggle the Hold switch on and off. (Slide it to Hold, then turn it off again.)
    2. Press and hold the Menu and Select buttons until the Apple logo appears, about 6 to 10 seconds. You may need to repeat this step.

    Nice Rant session:
    "It turns out that Videora iPod Converter can sometimes produce corrupt files, and these corrupt files will not be detected by iTunes as corrupt. Such files can be trasferred to iTunes and to your iPod without any error or problem, but will lock up your iPod when played. Now, when converting batches of videos with Videora, I scan the file-sizes to see if any are abnormally large; after all, using the same settings on a batch of similar in length videos should produce files of similar size."
    What did you expect for freeware? Nice effort but because it's free everyone thinks it's a gem. It's not. This web site has been flooded with questions that should be directed at the authors website. Video conversion and editing is not for the beginner. Sounds to me that you have a bunch of badly converted videos that are causing a lot of problems. Videora problems:
    Known Bugs
    Audio/Video sync
    Problem - Output files can be out-of-sync. While no set pattern has been established, it seems to be more frequent with input files of 23.976 fps, non-DVD rips, and WMV/MPG filetypes.
    Workaround solutions - Try the custom option '-async 1'. If the disconnect gradually increases over time, setting 29.97 fps sometimes gets rid of the problem regardless of the input fps. You can also use AviSynth to assume the FPS and have the audio sync to that. If it's a sudden disconnect, check your VOB Cell settings in DVD Decrypter settings per this thread. Otherwise, test with an AviSynth script per the DaProphecy's method in the FAQ. For non-DVD files, PSPVideo 9 may be a good short-term solution until the converter stabilizes some more or try something like AviDemux.
    Audio track not getting picked up
    Problem - The IFO stream rip is fine, but the converted file has no sound. The debug info showed to audio track getting picked up. The most obvious case with this is the Madagascar DVD.
    Workaround solution ideas - Test with an AviSynth script per the DaProphecy's method in the FAQ (untested). Use a different DVD ripper.
    Program doesn't start (.NET issue?)
    Problem - Converter errors upon starting with an extended dump.
    Solution ideas - Update .NET framework (in all languages you're using!) to most recent solution. Clean out registry. Neither of these have worked for some.
    Progress meter incorrect
    Problem - During transcodes, the progress meter can be incorrect; thus, transcoding continues after the meter hits 100% and time remaining is zero. People have been seeing this more often with VOB files and/or the H.264 codec.
    Workaround - Figure out the length of your movie in seconds and compare that to the 'Processed' field. A 2-hour movie will not finish until Processed hits 7200 seconds.
    Artifacts (bad video quality) in darker scenes
    Problem - Scenes with darker background colors tend to have more artifacts (blocked video). It's much more obvious on the iPod, so this may be an Apple firmware problem.
    Workaround ideas - Use a VBR setting (FQ->VBR, two-pass A->VBR) to improve video quality. The custom option '-mbd 2' might help.
    Desktop icon
    Problem - When installing, the desktop icon does not appear/stick when using lower color setups.
    Workarounds - Select a 32-bit color scheme in your desktop settings, or change the icon in the shortcut.
    Profile changes don't always stick
    Problem - If you make a change to a profile, click apply, and immediately trancdoe with that profile, the transcode might not use the new settings.
    Workarounds - Once you click apply, swtich to another profile and back again to make sure the change is still there. If that doesn't work, create a new profile.
    Can only install/use with admin rights
    Problem - There have been reports of non-admin users not being able to use the converter.
    Workarounds - Separate installs or give all users admin rights.
    Who in their right mind would use a program that has these many critical bugs to convert files for the IPOD. People who are cheap, kids with no money and people who are just plain gullably.
    A little research and downloading a trial from this site would have solved your video problems early on;
    http://www.divmm.com/
    The 5th Gen IPOD was designed to support video content that was purchased on the ITunes web site. For everything else, you are on your own.

  • Looking for a simple drag & drop apps to slow motion a Video?

    I'm doing a project with school kids that involves numerous iterations on building small structures out of balsa wood and taking them to breaking point to discover where the weakness lies in the design.
    I'm a FCPx and imovie user, but would really like to find an application where I can just take a video clip and run the app to take the video clip and slow it down.
    I'll have to do this maybe hundreds of times and do it almost real time while showing the kids.
    I'm looking for someting quick and easy to use..
    Does anyone know of such an app.. 'easy slowmotion' or someting like that.
    Thanks fo any help!

    I would say, iMovie or FCPX are simple slowmo generators…
    I'm doing a lot of sports-video - so, slowmo is of highest interest here.
    Best practice and still unmatched: find a cam, which records in HFR/high frame rates; there are some cheap (99$) Canon compact cameras (still with ability to record video), which offer 120fps up to 1000fps … but in a small resolutions.
    There's no need to 'process' such recordings, just playback with normal speed 25/30fps = slowmo.
    ALL other methods to create slowmo out of 25/30fps recordings involve processing!
    … where should the additionally needed frames come from?
    Features like OpticalFlow (FCPX, Twixtor) need tons of computation = no 'instant' effect.
    So, when you have no access to a designated 'slowmo cam', the fastest, only and most simple method is, to playback frame by frame: open your video with QuicktimePlayer.app, and step/hit cursor-right repeatedly.

  • How do i access the speed slider so i can slow motion in video clips?

    i an having trouble accessing this function.  I have CS6 (windows) and i can't access the 'speed/duration sliders' to slow down my clip to look like its in slow motion.  I know this can be done...it says so in the help file in photoshop.
    thx

    thx, i can't see where you do that (access the function to slow the motion of a clip).  in the help file it says to 'right click' on the clip to access those functions but when i do i get these optios below (no motion, pan, zoom, pan and zoom).  i want access the speed/duration sliders.
    i would say the function isn't available at all, but i could be looking in the wrong place (although i have tried everything).
    thx for your reply.

  • We need slow motion in video option camera plz

    Is it possible capture slow motion video option like iPhone 5s ?? cant find an app support that . we need it in video options in camera app  

    There do appear to be applications that fill this gap:
    https://play.google.com/store/apps/details?id=com.jqrapps.slowmotionvideo
    Don't forget to mark posts that answers the topic as Accepted Solution. 
    If you find any post helpful, press Kudos.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Powerbook making clicking sound and running slow

    I have had my powerbook for 3 years. Just recently it started running very slow and spinning beach ball comes up alot. There is a clicking sound coming from the top left corner of the keyboard by the speaker. When the clicking starts is when the beach ball comes up. It doesn't happen all the time. This occurs about every couple of minutes and then goes away. Once the clicking noise goes away the computer runs fine. I have ran disk utility, onyx and techtools (no errors have come up). Nothing has seemed to fix the problem. Can anyone give me some advice on what might be the problem. Thanks for your help.

    Welcome to the Apple discussions.
    That sounds like a hard drive possibly beginning to fail. However, it's located on the left side under the palm rest. In the upper left corner of the keyboard, the only moving part is a fan, however, if that were doing something odd it shouldn't cause the beachball to come up, which leads me to think it's a hard drive issue. Next time you hear the ticking, see if it could be coming from under the left palm rest area.
    So, ensure that your important data is backed up, and do it regularly, if not doing that already. Assuming it is your hard drive, you can either live with it, or replace the hard drive. (Don't know if you have Applecare, since you said your system is 3 years old). You may have a 4200rpm drive in there today, with 5400rpm being mainstream today, and 7200rpm the faster option. Sizes go up to 160GB in 5400rpm and 100GB in 7200rpm. Seagates come with a 5 year warranty versus 3 year for most other drives.
    If you're handy, you can do the replacment yourself or an Apple Authorized Service Provider or Apple can do it. If Apple or AASP does the replacement, make sure they write on the service order that you want your old hard drive returned to you. Recently, there was a person who was surprised to find that Apple may retain the drive as a trade in on the replacement drive. Also, if it were me, I would specify I want a new drive and not a refurbished drive.

  • HP 2000 Notebook PC Sound Not Working C2M21UA#AB​A Windows 8 64-Bit

    Bought laptop Tanksgiving and gave to my daughter for christmas. Sound stopped working all of a sudden in January. I downloaded the IDT driver and uninstalled the sound driver, power off, unplug, removed battery, press power key for 30 secs, restart, press esc, bios, load defaults, save, install IDT as admin, still not working...

    Hello layziboy,
    I see that you are having sound issues on your notebook, is that correct?
    You have done several appropriate troubleshooting steps. I have a suggestion for you to try. Here is a link to some steps for troubleshooting sound from HP specific to your model and Windows 8.
    Let me know if this helps.
    If you continue to have issues I would consider contacting HP Total Care for assistance. This will be the quickest way to get a resolution to your problem.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Problems with sound and safari slowness

    installed mavericks on a macbook pro from 2011, 2.5 GHz and 4GB RAM
    the sound icon on the top menu bar is light grey, won't open in system preferences (spinning beach ball of death...)
    safari takes FOREVER to load new pages, especially outlook, and new tabs...
    anybody else having issues or have solutions?

    For the sound issue ..
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following:
    ~/Library/Preferences/com.apple.systemuiserver.plist
    Click Go then move the com.apple.systemuiserver.plist file to the Trash.
    Restart your Mac. See if the sound icon is bold in the status menu bar and try System Preferences > Sound
    As for Safari, try troubleshooting Safari extensions and third party plugins.
    From the Safari menu bar click Safari > Preferences then select the Extensions tab. Turn that OFF, quit and relaunch Safari to test. If that helped, turn one extension on then quit and relaunch Safari to test until you find the incompatible extension then click uninstall.
    If it's not an extensions issue, try troubleshooting third party plug-ins.
    Back to Safari > Preferences. This time select the Security tab. Deselect:  Allow all other plug-ins. Quit and relaunch Safari to test.
    If that made a difference, instructions for troubleshooting plugins here.

  • Mac is making loud fan sound and running slow

    Recently upgraded to lion, computer has been shutting itself down and now has loud fan sound while running slow

    computer has been shutting itself down
    Try Resetting the System Management Controller (SMC)

  • Pavilion dv6449us fan making grinding, rattling sound and some vibration

    Its a fairly new HP laptop dv 6449us, but this thing sounds rough. I guess this is something I can't fix myself. Any suggestions out there? I'm tempted to try fixing it on my own, but there isn't a manual online at HP for such a thing. Any help?

    hprattle, 
    Try cleaning it first:  http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01657439.
    If the sound continues then a service/repair may be required and you should contact HP for support.
    The maintenance and service guide is here: http://h10032.www1.hp.com/ctg/Manual/c01035677.pdf
    -wes
    I am an HP employee.

  • Why when I play a video on my HP G2-34OUs Notebook the sound does not go with the video?

    When I play a video from a CD, the sound does not go with the pictures/film.  Sometimes the video just stops and will not move forward.  This happens on a number of players that I have enstalled.

    Hi henryjd,
    Sorry to hear about the videos issues, I know that can be frustrating. I will be happy to help. It sounds like you are having an issue with either your video and/or audio drivers. What version of operating system are you running?
    http://windows.microsoft.com/en-CA/windows/which-operating-system
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

Maybe you are looking for

  • Dynamically write data to a column named in a table

    I'd like to write a query that will look up a code, aggregate some data based on the results of that lookup, and store the result in a column named in the lookup table. This isn't real clear; I need an example. pseudo code: lookup_table(target_column

  • USB devices cause a crash at Lion login screen

    Since I have installed MacOS X Lion I am experiencing regular crashes at the login screen at startup. These crashes occur virtually always when + a USB device that was connected at the previous shutdown is missing at next launch + a USB device that w

  • Sender RFC Scenario Error:Payload Is Missing

    I am facing an issue in 'RFC2JDBC' scenario which is mentioned below: here our scenario is 'RFC2JDBC'.here our 'RFC' is having 2 fields in tables parameter i.e. empno & empname. the results of the 'RFC' is coming as: Personnel Number  Employee Name 0

  • Item text and note not transfering to PR which is in ECC from SRM 5.0

    Hi, We are in SRM 5.0/ECC 6.0 We have a requirement to transfer Item text and item note (Item Text/note to be printed on PR(T Code ME53n)) to ECC PR. From SRM 5.0 These Item note and Item text is available in PR->Iteam->Service->service text and line

  • How to turn ON Spotlight in Terminal?

    I recently upgraded my Dual 1.8 G5 to Tiger, and followed lots of advice to turn off Spotlight. I did this via the Terminal. well, ive decided that i want it back on, but i dont have the directions to turn it back on, only off via the Terminal. I am