Hp 2000 notebook pc screen light

my laptop screen light went out so I hooked it up to an external monitor til I can get it fixed, but the odd thing about it is it comes on by itself and then will go back out. What can it be ?

Hello barajas, welcome to the HP Forums.
I understand that the light went out on your screen, that sometimes it comes back on but will go out again. I will try to help you with this.
From how you describe this, it could very well be a loose cable in the display screen. The fact that it mysteriously works for a bit, is what makes me thing this. That would be something to have looked at with whomever is "fixing" the notebook for you.
As another resource for the issue, I do recommend reviewing this document: Resolving Problems with Notebook Displays (Windows 7).
I hope that's able to help you.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Similar Messages

HP 2000 Notebook Screen not working.... Still

I have an HP 2000 Notebook that is running windows 8 64 bit and the screen on the laptop will not work. When I turn on my computer, the screen won't show but the fans and everything els will work as normal. The capslock button does blink in a 2 blink series, which according to HP means bios error, but I believe that is not the proublem. I have tried to fix this proublem by all of the following:
- Holding the winsows key and b, then pressing the power button (for one second) which should direct me to my bios update but it doesn't becuase i still can't see anything
- Switching the ram into different slots, I have 2 sticks of 4 gigs, I have also tried just one stick
- Taking out the battery and unplugging it and holding the power for 60 secconds and plugging it back in... multiple times (Getting rid of extra charge)
- Checked if the black light was dead but it wasn't becuase normaly if you take a flashlight to the screen you can still see it slightly but I can't see it at all
The weird thing is, is that I can plug it into an external monitor and it will work. Also every now and then the screen will work for about a day but then the next day it won't work again. I even tried calling HP, but for them to talk me through it and try to fix it, it cost $75.

Hello, @jiddy30
Welcome to the HP Forums.
I understand that you're having issues with a black screen on your notebook. I will try to assist you with this.
As you're troubleshooting led to trying an external monitor and that is working, the issue is more then likely with the actual notebook display itself. I would guess with it working at times, it could be a loose wire in the display. It could also be the display.
If you're comfortable you can check this yourself, Maintenance and Service Guide - this has visuals and instructions on replacing components. It also works as a guide when it comes to opening a notebook to just check wires and components.
I hope this can help some.
Thank you for posting on the HP forums.
I worked on behalf of HP.

Does anyone know where I can buy a screen for my HP 2000 Notebook PC 2000-2d24DX ?

My son got a laptop for Christmas last year and recently cracked the screen. I am trying to buy just a screen and not a whole new computer!! ( I actually will not be buy a new computer, he will go without) Here is the information on the box:
HP 2000
Notebook PC
2000-2d24DX
Intel Pentium Processor 2030M (2.5 GHz)
750GB Hard Drive
4096MB DDR3 SDRAM
DVD Optical Drive
Windows 8
15.6" Diagonal HD BrightView LED Display
WLAN
Thank you,
Angelique

Here is a link to the specifications of your laptop:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03977467&tmp_task=prodinfoCategory&cc=us&dlc=en...
Here is a link to the Service and Repair Guide:
http://h10032.www1.hp.com/ctg/Manual/c03763129.pdf
According to the Service Guide, the part # for the display is:
689690-001
Do a search on the above number and you will find the parts you need.
Bill

HP 2000 Notebook PC -- Extended display monitor and built-in screen swapping with each other.

I have an extended display monitor connected to my notebook and every so often without any warning the displays will flicker to black screens, and then quickly swap back and forth with each other 2 - 3 times, usually resuming the way it began. Entire event lasts maybe 10 - 15 seconds total but during that time I have no control of my PC. Anyone know how to stop this from occuring or what is causing it to happen? Thanks for any assistance with this issue .
HP 2000 Notebook PC - Product # : D1E80UA#ABA - AMD Radeon HD 6310 Graphics Windows 8.1 64-bit system.

I'll try helping,
If the flickering is seen in the extended display
I think the issue may be with driver then,
First
Uninstall the AMD graphic driver from Device manager - Display adapter , Control panel.
shut down laptop
then try a hard reset
this might help you in that-
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01684768&cc=us&dlc=en&lc=en&jumpid=reg_r1002_us...
then,
Tap away at the ESC key as you power on the notebook again to launch the Start-up Menu and then select F10 to enter the bios menu.
Press F5 to load the defaults (sometimes F9, the menu at the bottom will show the correct key )
use the arrow keys to select 'Yes' and hit enter.
Press F10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - just let this complete.
Then,
download, saving & install the latest AMD HD Driver from your product website here:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=5360...
Restart the system
Check the issue.
++Please click KUDOS / White thumb to say thanks
++Please click ACCEPT AS SOLUTION to help others, find this solution faster
**I'm a Volunteer, I do not work for HP**

Keyboard+trackpad not functioning at all on HP 2000 Notebook PC! please help!

Tonight I turned on my laptop (HP 2000 Notebook PC) to find that the Keyboard and track pad was not responding, the only thing that worked was the wireless mouse.
I can not find the product number but the name is HP 2000 Notebook PC, the operating system is Windows 8, I can't login to see if there are any error messages, the last thing I remember doing was trying to apply a new cursor image and it told me to restart and when I did I couldnt log back in or type anything at all, I could only use the mouse.
Also the things I have tried to do are: Restart Computer, Take out batter and restart. (I cant do much because I can't type in password)
All help will be greatly appreciated!
UPDATE: I logged in using the On-Screen Keyboard, it seems like a hardware malfunction and not a virus because i cant find anything in my downloaded stuff that wasnt there before. So it is just a hardware malfunction.
UPDATE #2: it says that the driver (for keyboard and touchpad) may be corrupt or missing and it says Code 39 in parenthesis.

Hello Oceanlife,
You state that the keyboard and touchpad are not functioning, that is correct? I will try to assist you with this issue.
As of today are you still having this problem?
If you have, any more questions do not hesitate to ask. .
Thanks
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Screen light auto turn dark when I use program/web with background dark in windows 8.1

Hi there,
I used HP Pavilion dv6t-6000 CTO Quad for 3 years.
CPU: Intel core i7-2630QM
GPU: AMD Radeon 6490m
It build in windows 7 and I manual install ( fresh install ) windows 8. It's fine. But when I upgrade to windows 8.1, it have an issue and I really hate it.
When I use "Sublime Text" ( with background is black ), the screen light is become darker. And when I back to ( e.g: a website with background is white ), the screen turn back to lighter.
I tried many ways, included 4 ways here but it's NOT WORK.
NOTE: When I used Option 1 ( upper )
1. Open PC settings, and click/tap on PC and devices on the left side
2. Click/tap on Power and sleep on the left side, and turn on or off Adjust my screen brightness automatically on the right side under Brightness.
==> It's NOT SHOW button "Adjust my screen brightness automatically". It mean: I have NO built in auto brightness sensor.
I think this issue is about AMD driver or Intel Graphic driver.
Is anybody have idea???

Hi @kolz,
Welcome to the HP Forums!
It is a wonderful place to find answers and solutions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
i grasp that after updating your system from Windows 8 to 8.1 you are having an issue with the display going dim.
You have tried some steps you located on the web but there was no change.
Windows 8 an 8.1 are not supported Operating Systems for your notebook. This does not mean they will not work only that HP has not tested it and therefore does not supply updated drivers. You would need to check the manufacturer's site for any updated drivers.
Downloading or Updating Software and Drivers for HP Computers
When I checked the driver page for your notebook I did notice there is a bios update, have you done that?
HP Pavilion dv6t-6000 CTO Quad Edition Entertainment Drivers and Software
As a bios update does have a potential to cause damage I suggest contacting HP support for assistance with that process.
Updating the BIOS
Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
World Wide Phone Support
Good Luck!
Here is a link to Troubleshooting a dim display (Windows 8, Windows 7 and Windows Vista)
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Screen light doesn't adjust

Hi,
my problem is that my screen light won't adjust.
I can see the light volume setting on the screen (thought it doesn't work normally: it usually stops going up or down after one click..) but the light level is always the same.
I tried the control panel too, but nothing worked.

Help us to help you by posting the following information.
1. The full Model No. and Product No. of the notebook - see This HP web document if you don't how to locate the model number and\or product number.
2. The complete version and name of the operating system you are using ( ie Windows 7 64bit ).
3. Is your notebook still covered under warranty? Check your warranty status Here.
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

HP 2000 Notebook PC Right Hinge Is Loose

A little over a year ago I purchased a HP 2000 Notebook PC.
Over the course of a few months I noticed a subtle popping or cracking noise whenever I opened my laptop. I didn't make much of it at the time, but now it's starting to become more noticable. What more I have also realized that the right hinge of my laptop cover is loose, which I believe is the sorce of the popping whenever I open my laptop screen.
I'm concerned in the event that the hinge breaks completely. To make matters worse I know my warranty expired earlier this year, but this issue came up before and it only just recently started coming to my attention that it might become a problem later down the line. My laptop is my livelihood and I can't live or do my work without it.
Any help or suggestions would be appreciated.
Thank you, and let me know if you need more information.

Hi @rnwashburn ,
I have sent you a private message. If you are not sure how to check your private messages then this post has instructions that will guide you through the process.
Regards,
George
I work for HP

How do i retrieve data from a powerbook whose screen lights up but displays nothing? I have a firewire and a second powerbook...

how can I retrieve data from my old powerbook? It's screen lights up, but displays only pixelated blankness. I have a second powerbook and a firewire cable....

It would probably be correct to assume that both PowerBook computers are equipped with FireWire. The article below could possibly be of interest to you. With a bit of luck, the old computer will be recognised.
http://support.apple.com/kb/HT1661
Otherwise, it may become necessary to open the old PowerBook and remove the hard drive. The drive can then be connected to an appropriate external USB adapter, and read via another Mac.
Jan

Turned on my ipad,dark screen lights up but cant see a thing... can anybody tell me how to fix this

Just turned on my ipad 2 wi-fi , black screen lights up to lighter black but I cant see a thing on it... does anyone have any ideas on what's wrong with it?

Try this First... No Data will be Lost...
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...
If no joy... Try a Restore...
1: Connect the device to Your computer and open iTunes.
2: If the device appears in iTunes, select and click Restore on the Summary pane.
Restoring > http://support.apple.com/kb/HT1414
3: If the device doesn't appear in iTunes, try using the Steps in this article to force the device into Recovery Mode

HT1386 After upgrading itune on my computer to 10.5 and after upgrading to ios 5 on my 3g iphone, and after backup on my computer, my iphone simplay cannot open up. The screen lights up but it I keep getting the message, "there is no sim in your phone. Th

I have upgraded itunes on m computer to 10.5. When I connected my iphone to the computer I was told that ios 5 is ready to be downloaded, and that I should back up my iphone before doing the download. I did. Now I want to get my iphone back on and it just can't . The screen lights up, i select language and network but it tells me that my phone cannot be activated because the activation service is temporarily unavailable. what do i do?

Try a Hard Reset.....
Press and hold the Wake / Sleep button AND the Home button at the same time, keep them both pressed until the Apple Logo appears on the screen, it can take 10 or more seconds. Ignore the swipe to turn off message.

When I press to the left of the home button, the screen lights up

When I press to the left of my home button, the screen lights up as if I were pressing the actual button. This causes Siri to pop up randomly all the time and my phone keeps accidently taking screen shots. Should I take it in?

I was a little confused when I first read this, but I think I understand what you mean now. The bottom left part of the glass on the front of the iPhone, by the home button, can cause it to act like you're pressing the home button. I do not experience this issue on my iPhone 5. This is probably a small defect in your iPhone. It isn't major, though, I'm sure if you visit the Genius Bar in your nearest Apple Store, you can get advice from the experts on what to do.

Screen lights up white but nothing shows?

when I turn on my iPod the screen lights up and when I touch the wheel I can here it clicking but the screen doesn't show up except for lit up white. The music does play but does anyone know what I need to do to get my screen fixed?

I don't know whether this will help because it's not specifically for nanos. Worth a try.
iPod 5th gen (with video) shows blank or white screen.

Screen Lights up while I'm on a call

Why does my screen light up when I'm talking on my Iphone4? I keep muting, hanging up, putting tne person I'm speaking with on hold....this is extremely annoying and makes me regret buying this phone! Why is this happening? What should I do?

I never think of myself as suffering from the proximity sensor issue but the truth is that on the odd occasion that I don't have my bumper on my phone I do sometimes mute the call with my cheek. This never ever happens with the bumper on the phone.

The screen lights wont turn on my ipad

I need help.. all of a sudden the screen lights on my ipad wont come on
I hold the home button and sleep button at the same time
but still nothing happen

Hold those two buttons for 10-15 seconds (until the Apple logo appears. If it does not, take it in for diagnosis.
Barry

Hp 2000 notebook pc screen light

Similar Messages

Maybe you are looking for