HP 2009m Monitor

I recently purchased this HP 2009m monitor. When setting it up the information on the setup menu states that my version is 1024x 768 60hz
recommended version is 1600x900 60 hz. I did go to the control panel and display then settings and changed the setting to 1600x900,however the whole screen got smaller, so I changed it back. I know this monitor has the brightview display on it howeverit sure does not look like it did in the store. Also when
I am looking at door mats they seem to be elongated. Can someone help?

Below is a list for the specifications for this monitor.
So the recommended resolution for this monitor is 1600x900 which should look pretty small but clear.
When u lower the resolution to like 1024x768 like you said then the bigger gets bigger and doesn't look as clear but it's more readable.
Depends on how you want it and if you trouble seeing small letters you should set it around 1280x1024 or so in the middle range.
I always put mine on the highest resolution which would be 1600x900 for you because it's smaller and more clear and more details and space to work with.
http://shopping.msn.com/specs/hp-2009m-lcd-display-tft-20/itemid1181675931/?itemtext=itemname:hp-200...
Now for the Brightview, that's a feature which gives the monitor increased brightness. You can adjust these options in the monitor's menu by pressing the Menu button on the lcd itself and look in the OSD menu for brightness, contrast and more. You can increase and decrease that.
For the door mats, i'm not sure what that is or you're referring to, maybe the monitor stand. I would look into the manual for adjustment or check hp.com and search for your lcd's model or product number such as 2009m and it gives you online .pdf manual file to view.
Message Edited by c0rnel on 04-10-2009 08:45 AM

Similar Messages

Xbox one on HP 2009m monitor will it work

Will it work and what adapter do I buy?
I am trying to connect my Xbox one to HP 2009m monitor
The monitor does not use a hdmi cord
Can I buy an adapter for it and will it work?

http://m.ebay.com/itm/141210464113?_mwBanner=1
Will this work?

No Sound, HP 2009m Monitor

I have my monitor connected to my HP p2-1334 computer. I have a red x through my speaker icom in the lower right corner of my screen. I am using Windows 8.1 and when I troubleshoot I get the message no headphones or speakers plugged in. I have downloaded drivers, bought new cable for VGA and DMI. When I go to properties it says device is working properly
This question was solved.
View Solution.

i SOLVED THE PROBLEM.....i DIDN'T HAVE SPEAKERS PLUGGED FROM MY DESKTOP TO MY MONITOR....
Bubba1021 wrote:
I have my monitor connected to my HP p2-1334 computer. I have a red x through my speaker icom in the lower right corner of my screen. I am using Windows 8.1 and when I troubleshoot I get the message no headphones or speakers plugged in. I have downloaded drivers, bought new cable for VGA and DMI. When I go to properties it says device is working properly
Bubba1021 wrote:
I have my monitor connected to my HP p2-1334 computer. I have a red x through my speaker icom in the lower right corner of my screen. I am using Windows 8.1 and when I troubleshoot I get the message no headphones or speakers plugged in. I have downloaded drivers, bought new cable for VGA and DMI. When I go to properties it says device is working properly
Bubba1021 wrote:
I have my monitor connected to my HP p2-1334 computer. I have a red x through my speaker icom in the lower right corner of my screen. I am using Windows 8.1 and when I troubleshoot I get the message no headphones or speakers plugged in. I have downloaded drivers, bought new cable for VGA and DMI. When I go to properties it says device is working properly

HP Pavilion All in One Not Detecting External Monitor

Hello I have an HP Pavilion All in one 23-g010 running windows 8
I purchased a VGA to USB adapter so that I could connect my external HP 2009m monitor and it worked just fine. I had to reset my computer and I used System Image Recovery everything else works fine except now when I plug in the adapter and click on Share it says " Nothing Can be Shared From this Desktop" When I look under Screen resolution it just says Generic Non-PnP Monitor and wont allow me to select anything else. I tried downloading drivers but it just says my computer doesnt meet not meet the minimum system requirements to install the driver. I am at a loss as to what to do, I work at home and dual monitors is a must.
Thank you for any help

Did you create the "Windows System Image" before you purchased the USB-to-video adapter??? After preforming the System Image Recovery, did you install the drivers for the USB-to-video adapter??? The drivers for the adapter should have been included with the adapter or are available on a 3rd party website.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Troubles with G4 Loaner and new HP monitor

Hi!
I am having difficulties ramping up with a loaned Power G4 and a new HP 2009m monitor. I've had these for about a month...
I was never really sure how this older mac should be running, but it is sluggish - the keyboard is very slow, working online is ... just slow. period.
From the beginning, the mouse got a little "lost" over on the right hand side of the monitor. I looked, and discovered there are no drivers for mac to see if that might help.
The last few days, I've had more problems with mouse trails, safari window corrupted, let's see... what else? When I move the mouse over the edge of firefox window it kind of jumps slightly. I thought the other day I thought I had somehow managed to enter a kind of telescoping view that I couldn't get out of... same "bump" when moving mouse around.
Can you help Me??
My iMac had a kernel panic and this was offered. I may crack up if it's not going to work out. I've already lost a lot of time, etc. getting back up to speed. TIA
BTW, I'm confuse about what to call this computer. the system info says PowerMac G4 and

I did include the SN!
No Problem, I asked a host to edit it.
Factory: XB (ElkGrove/Sacramento, California)
Production year: 2000
Production week: 23 (June)
Production number: 3621 (within this week)
Here's all the info on that Model...
http://www.everymac.com/systems/apple/powermacg4/stats/powermac_g4500.html
But the universal access was super and the bump is GONE!
Great to hear!
Although the mouse still gets lost in the hinterlands.
Could be many things, but One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for action in Safe Mode...
Reboot, test again.
While it can still can be HW such as Video Card, Airport, Mouse, etc., If it only does it in Regular Boot, then it is some 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
Check System Preferences' Other row.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
Not sure which iMac you had, but an year old Mac isn;t going to be as fast likely, especially the way they've messed up, (enhanced), the internet! How are you connecting? Airport, Ethernet, Dial-up, other?
We can likely fix a few issues, & it should work, just not speedily.

HP 2009m lost sound

My HP 2009m monitor/speakers was working just fine untl last week when the speakers stopped working. System is configured properly as I can hear audio through headphones when they are plugged into back of computer. Are the speakers broken or can they be reconfigured.

How is the audio signal transfered?
Hdmi? Audio cable? Have you check all connections?
*** Say 'Thanks' with Kudos ***

HP 2009m adjust resolurion to 1600x900 xp pro

I reintalled XP pro OS.
My HP 2009m monitor was purchased with the Inspiron MT 537computer in 2009.
It worked by plug & play.
On the reinstall, there are no setting in the Control Panel (Display) for 1600x900.
How can I set the display to 1600x900?
(I've done it before, but have since forgotten)
Thanks
This question was solved.
View Solution.

GliqInfo, welcome to the forum.
Here is the HP Display Installer program for XP for your monitor. You should use this progam to assure that your monitor is setup properly.
Then, you can go into the Control Panel / Display to change the resolution.
Please click "KUDOS Thumbs Up" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Screan keeps going black while it is on

have a hp 2009m monitor it wont stay lit up turn it on stays on 2 seconds then goes black turn it off and back on again and it comes back on again for 2 more seconds then goes black again does any one knows what the problem might be thanks also im using windows 7 have another monitor and it works fine

Hello fixitguy,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand your monitor keeps going off and on. There is very little troubleshooting available to a monitor. I would suggest you un-plug the power cord from the wall and the computer. Hold down the power button for 30 seconds and then plug it back in. If you are still having issues you can try restoring it to factory in the menu options on the monitor.
Otherwise, if the monitor is under warranty contact HP Technical Support for repair options.
You can also try to replace the power cord using the following part numbers. The parts can be purchased from the HP Parts Store.
8121-0729 - Argentina
8121-0735 - Chile
8121-0739 - Singapore, Hong Kong and the UK
8121-0740 - USA, Canada, Mexico, and Taiwan
If it is not under warranty and the power cord replacement does not work, it looks like you may need a new monitor.
I would like to thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

P55-GD85 Smart Error (Bad Status) on Sandfornce SSD at POST

Hi,
I recently bought 2 x 64gb Microcenter G2 SSD which has Sandforce SF-1222 controllers on it. However, when I plugged it on my SATA Intel ICH10R SATA ports, every time I turn it on, It gives me an error indicating
"AHCI Port0 Device Error"
"AHCI Port1 Device Error"
Press F1 to resume ..
and it also gives a Smart error. By looking on the errors, one would assume that this is an SSD problem. So I went back to microcenter and they replaced it with new drives. After getting the new drives, it gave me the same error again.
I tried connecting the SSD to a different Intel sata port and still gives me an error (of course, changing port0 to whatever port I connect it). Despite having an error, I can still install an operating system to it, run benchmarks, and tests have good results. However, I noticed that the system POST went very slow. Like detection of drives are really really slow. I also tried changing the Intel Sata modes to IDE, AHCI, RAID, nothing. I actually ran and tested RAID 0 on this system and to my surprise, everything is SOOO LAGGY inside the Intel Matrix Storage ROM setup. Before, from the system turned off, from the moment I press the power button, POST compeletes in like 3-5 seconds. After putting these SSDs, POST completes in about 40 seconds.
Now I tried connecting the drives to the Marvell and the Jmicron ports and it did not give me any SMART errors. It boots fast and normal. RAID in Marvell works fine with these 2 SSDs. But Marvell is so crappy. I don't want to use it. I want the Intel Ports.
Before upgrading to these Microcenter SSDs, I originally had a Kingston 64gb SSDNow and it does not give me any kind of errors or problems. I also had a pair of Samsung 500GB spinpoint drives running in RAID-0, no issues.
I also tried connecting the Microcenter SSDs, to my Laptop and my other computer (ICH7 Gigabyte board) and never gives me any SMART error.
I read somewhere that this could only be a BIOS issue but my bios is the latest one (1.4)
Could anyone please help me?
THanks!
System specs:
P55-GD85 BIOS version A7585IMS version 1.4
Core i7-870 running at stock
8gb DDR3 G.Skill Ripjaws 1600 (XMP enabled)
Corsair PSU 650Watts (single 12v rail)
EVGA GTX 460 768mb
Sata DVDRom drive
2 x 500GB Samsung SpinPoint HDDs
1 x 64gb Kingston SSDNow (Jmicron Controllers)
2 x 64gb Mircocenter SSDs
2 x HP 2009m Monitors
Logitech MK300 Wireless KB + Mouse
Windows 7 / Linux Mint both 64-bit

I can't find anywhere in the BIOS (which I also find weird).
Anyway, I went ahead to Microcenter again and bought an Agility 2 60GB ssd which has Sandforce too. It's not giving me any errors. So I guess it is caused by just the Microcenter SSDs but I wonder why.

HP monitor 2009m goes black on a reandom basis.

HP monitor 2009m goes black on a reandom basis. Starting in safe mode (as recommended) OK once but not every time. What is causing the problem and how does the problem get fixed?
Sorb1

Eric Ross,
Hi,
I did as You indicated and found on the top left hot corner was set to "put display to sleep" and the lower left hot corner was set to " disable screen saver", Both Right side upper and lower hot corners were not set (they had a -)
So, I adjusted the two "set" hot corners to - to match the other two. No incidents since of any display going black on a intermittent basis or at all, Thank You Very Much for Your Reply and Insight! Will post as "Correct Answer"
6stringsor12

Hp Monitor 2009m power button blinks blue

I left my monitor on and came back serveral hours later and find that its black screen and the power button just flashes blue. Mouse, keyboard and cpu are all on.
What do I do?

Javid18, welcome to the forum.
Here is a guide that may help you solve your problem.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Monitor HP 2009m

I lost my driver software. I need to find this software for my monitor

Hello @kbent99,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how you are looking to download software for your monitor, and I would be happy to help you!
You can download software for your HP 2009 Series LCD Monitor below:
HP 2009 Series LCD Monitor Driver
I hope this helps!
Best Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

External monitor hooked to laptop keeps going "dark"

The screen on my laptop cracked and so I have hooked it up to an external monitor HP 2009m via VGA. Laptop is HP Pavillion dv6 with Win7 home premium with all current updates. After I have been working for about 30 minutes, the monitor keeps going off and I have to hit the power button which usually brings it back, but sometimes I also have to use the source button to cycle back to an active monitor. The "power lockout" shows up occasionally and sometimes it just refuses to stay on for more than 30 seconds. I have used the factory reset, have held the power button for 15-30 seconds and unplugged it but it still keeps happening. I have disabled OSD and sleep and everything else I can think of. Starting to suspect it is something coming from the laptop, have never seen anything like this and scoured forums for simliar problems/solutions (hence the holding power and factor reset items I have already tried). I am starting to suspect it might be Netflix, although this seems odd, but it definitely happens more often if I am listening to Netflix in the background.
Anyway, I will reboot and it will be ok for awhile. Actually, until I start watching netflix again. Any other ideas? Driving me insane. Can I just get the monitor on my laptop fixed replaced? Thanks in advance for any ideas.

you can check in power option and monitor options too
>> start menu >> control panel >> Power options
you will see the list on the left column and you will find monitor options
Please provide Kudos to whom has provided answers or
good points or advice..
Aslo if the questions or issues solved please check it
"Accepted"
Thanks and you are welcome _____ Rick

PowerMac G4 (AGP) and HD LCD Monitor

I gave my daughter a few years ago my old G4 PowerMac (AGP Graphics) which has a VGA port and is connected to a huge Apple 17" CRT Studio Display. I'd like to give her a modern LCD display. The HP 2009M HD LCD Monitor states that it comes with a standard analog VGA input. Is there any reason this monitor would not work with the G4 PowerMac?

I looked at the HP site and it didn't mention anything about being able to use this display w/ Mac computers. It Looks like this LCD panel is Windows XP/Vista only.
Not sure why it wouldn't be Mac-compatible, though.
You could just do a search for Mac-compatible LCD panels or monitors and see what comes up.
There are plenty of non-Apple LCD panels that work fine with Macs.
I had my girlfriend purchase an LCD flat panel monitor that was, relatively, cheap. It was labeled only worked with Windows. We bought it and it's connected up to a Radeon 7000 video card via DVI in a old beige G3 box upgraded to G4 status and it works fine.
With using the VGA connections, I can't see why the HP wouldn't work.
Personally, I have found that most LCD displays are not platform-specific, anyway.
The HP should work fine.

Monitor new---no signal after 2 days

tonight I was working just fine then when I rebooted to ensure some prefs were not still taking hold it gave me the "no signal" error then goes to sleep.
monitor: hp 2009m
it states that I should check the video cable but I don't know where that is. Is it the cable that goes from the back of the comp to the electricity?
the computer powers on but without the monitor it does me no good...i am using my laptop to come here for help.
any ideas where it is located?
all the cables from the monitor to the computer are connected firmly and I disconnected them and reconnected and still no monitor.

In that case, I have no experience with poweron.com. As for buying a used G4, you're probably aware that resellers of secondhand computers typically buy them in large lots at auction. If you ever saw a pallet of them stacked on their sides (sometimes 5 or 6 high), you'd probably never want to buy the one that was on the bottom. With metal-cased PCs, cosmetic damage is probably not as bad as with the plastic side-paneled G3s and G4s. Scratches on the ice-colored panels of a B&W G3 are noticeable, but not as glaring as ones on the crystal-clear side panels of a G4. If you're not particular about appearance, buying an affordable secondhand Mac from an online merchant is probably the way to go. Many used-computer dealers state something like "has the normal amount of scratches from everyday use." Excluding laptops that get toted around all of the time, most individuals don't scratch their computers in normal usage. The cosmetic damage seen on used computer exteriors was typically caused from rough handling, by the companies that reclaimed them from corporate use. If there are any dealers in your area that sell used Macs, you might want to check them out. If that's not an option for you, I'd press the web merchant for an accurate description of the overall condition of the unit that you'd be buying. If he's reluctant or gives a vague appraisal, consider yourself warned.

HP 2009m Monitor

Similar Messages

Maybe you are looking for