HP 2110 cancel print alignment

On an hp 2110 psc all in one after changing the black ink cartridge I did the print alignment and following that, the message keeps telling me to do the print alignment over and over. I have unplugged and waited on power and USB cords and still the same message. thanks.

Hi , Welcome to the HP Forums! I noticed that you are unable to cancel the print alignment with your HP PSC 2110, and I am happy to help! Please try the steps within this guide, Press Enter to Align Cartridges, you will want to make sure you are using Genuine HP Ink Cartridges, and that none of your Ink Cartridges are empty or low. (Even though the guide title may not match your issue, I believe the solutions will help.) Hope this helps! “Please click the Thumbs up icon below to thank me for responding.”

Similar Messages

INSTALLED NEW INK CARTRIDGE and cancelled the alignment PRINT HEAD IS STUCK

Greeting everyone
I just put a new color 57 HP ink cartridge into my all in one 2210 printer & somehow I cancelled the alignment as it seemed not to be doing anything....and now it will not return the printer head and will do nothing.... how will I fix this?
this is just a printer problem as the printer was working fine before I changed the ink. My Dell inspiron 580 wi PC is working fine and I have been printing direct from my computer to printer every day until my goof up...... intel core (TM) i5 CPU @3.20 GHz 64 bit 8.00 GB RAM
Thank You Mary Svinth in Waldport Oregon Coast
[Personal Information Removed]

Hi - A couple of things to try:
- Unplug the power from the back of the printer.
- Open the top cover, and slide the carriage to the center.
- Remove the cartridge and try reinstalling. Make sure the ink cartridge snaps in and is firmly held by the carriage.
- Plug the power cord back into the printer and power it on.
If that doesn't work, try repeating the steps above, but this time, remove the USB cable, which will completely isolate the printer and narrow down the issue.
Hope that helps.
Say Thanks by clicking the Kudos thumbs up. Please mark the post that solves your problem as an Accepted Solution so other forum users can utilize the solution.
I am an HP employee.

Failure to print alignment page after changing ink cartridge

I just replaced the tricolor ink cartridge in my ENVY 5530 printer and after installing the new cartridge the unit is stuck in a loop of "Now printing alignment page..." however there is no noise indicating that the page is being fed. Attempts to cancel the action also result in a prolonged "Cancelling ..." but with no action. Based on other comments in this forum I have:unplugged the unit.removed all ink cartridgesRestarted the unit - where in I receive a message that I should use the power off button to prevent damage to the unit.reinstalled the cartridgesAttempted to print the alignment pageHowever the cycle simply repeats itself.Any assistance would be appreciated - the unit was functioning perfectly fine before it simply ran low on ink and used the ink cartridge sent by HP Ink service as the replacement unit. Many thanks in advance.

Hi SolomonI, Welcome to the HP Forums. I see that you are having an issue after you have installed new ink. I see that you have done numerous steps in the attempt to resolve this issue. You stated that you unplugged the unit from the power source. Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. One thing to try is to by pass the alignment page and see if the unit will print from a copy or print from the computer. Let me know how you make out. I will be happy to research other options if needed. Cheers,

Cancelled print but will not cancel and comes back on to print same job

cancelled print but will not cancel and comes back on to print same job on on hp deskjet all in one

Hi,
From the Control Panel, open Administrative Tools and select Sevices. Browse down to the print spooler service, right click it and select Properties then click on the Stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the job has been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

HP Officejet Pro 8000 -- keeps printing alignment page

I was having troubles with the black ink not printing correctly so after doing many cleanings I decieded to manually clean the print head. I took the printhead out of the printer then wipped the part where the ink comes out with a most paper towle. After I put the printhead back in the printer printed a print alignment page. OK. Now when ever I print anything the printer will after the print job is done print another alignment page. Is there a way to make it stop? Thanks for you help.
This question was solved.
View Solution.

@MacNeilBlue- I am sorry that you are having an issue with the alignment page printing repeatedly. I would remove, and reseat the cartridges. Then I would repeat the alignment process as shown below.
Open the HP product software:
Windows XP: Click Start ( ), click All Programs , click HP , click the folder for your HP product, and then click the icon for your HP product ( ).
Windows Vista or Windows 7: Click the Windows icon ( ), click All Programs , click HP , click the folder for your HP product, and then click the icon for your HP product ( ).
Windows 8:
Right-click or tap and hold the lower left corner of the screen, and then click or tap Search from the menu.
Click or tap Apps ( ) if it is not already selected.
Type HP in the search box.
Click or tap your printer ( ).
NOTE:You can also open the HP product software from your computer desktop: double-click the icon for your HP product ( ).
The product software opens in a new window.
In the product software, double-click Printer Actions ( ).
Double-click Maintenance Tasks ( ). The HP Toolbox opens.
Click the Device Services tab.
Click Align Ink Cartridges , and then follow the on-screen instructions to print the alignment page.
Lift the scanner lid.
Place the alignment page with the printed-side down on the right front corner of the scanner glass. See the engraved guide next to the scanner glass for help loading the alignment page.
Figure 6: Place the alignment page on the scanner glass
Close the scanner lid.
Press the button next to OK on the control panel display ( ) The product scans the alignment page.
When the Alignment successful message displays on the control panel screen, press the button next to OK on the control panel display ( ) to complete the alignment.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Cannot cancel print job - error ePC 551

I cannot cancel print jobs, when i click the cancel option I get and error code ePC551

Resolved...just had to go into Devices and Printers, select the printer and cancel the job.

Smartform - Output window (Accept, Cancel, Print, Preview)

Dears experts,
when i execute a preview of a Purchase Order, a message windows appears and you can select the diferents message( print, external send) and Accept, Cancel, Print or Preview.
I want to do 2 things.
- I only want to view Accept and Cancelled button in the Output Message window. how can i do it? with the parameters output?
- I want that when I accept the message with the OK ICON, execute the code to send the purhcase order as email. nowadays, the pdf code is execute when I chose Preview.
Any idea?
thanks a lot!

Hi friend sure.
You need to increment the index only at the loop no where else and the variable for holding the index value is global.
If you create before the read every time it gets trigerred.
After each loop you assign the sy-tabix value to that variable.
Just like this ,
v_index = sy-tabix.
Then at the window just read the table as shown
READ TABLE t_chq INTO x_chq INDEX v_index.
This will do friend.
I will update the flow of my code here, then you many understand it much clear.
Page1
Main window (below page1)
    Loop (inside Main win)
      program lines. code : v_index = sy-tabix. v_lines = lines( t_chq ). (inside loop)
      Condition (inside loop)
         True
            check the v_index < v_lines if true break page, for page break create a command and do it (Inside true condition)
         false
           blank.
Secondary window (below page1)
    program line (inside sec wind)
    Inside program lines the code is READ TABLE t_chq INTO x_chq INDEX v_index. (inside sec wind)
Secondary window2 (below page1)
     program line (inside sec wind2)
    Inside program lines some other code. (inside sec wind2)
This is my logic try like this friend.
I think for other records its coming fine because since it is an local variable its getting updated some where and also showing 1 bec its always initializing.
Try this you will get if any issues please revert back to me
Thanks,
Sri Hari
Edited by: srihari.kumar on Jan 6, 2012 11:04 AM
Edited by: srihari.kumar on Jan 6, 2012 11:05 AM

UNABLE TO CANCEL PRINT JOB THAT KEEPS PRINTING SAME COPIES

How do you cancel print job on a HP Deskjet D1520 with Windows Vista?
THANKS!

Since this printer does not have a physical "Cancel" button, the easiest way of stopping a document print is to clear the document from the Print Queue.
To remove a document from the print queue manually:
1. Depending upon your operating system, do one of the following:
• Windows Vista: On the Windows taskbar, click Start, click Control Panel, and
then click Printers.
• Windows XP: On the Windows taskbar, click Start, click Control Panel, and
then click Printers and Faxes.
• Windows 2000: On the Windows taskbar, click Start, point to Settings, and
then click Printers.
2. Double-click the icon for your product to open the print queue.
3. On the Printer menu, highlight the document, click Cancel or Purge Print Document,
and then click Yes to confirm.
Now, if the document has already started printing and you want to stop it before it finishes; then simply lift the top access door which will pause printing. Remove the document from the print queue now. If it is no longer in the print queue, then power off the printer. Wait about 30 seconds and power on the printer again. This should have stopped the document from printing.
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Delete "Cancel Print Job" pop up

5.23.11
Every time my HP Officejet Pro L7780 starts printing,
a pop up screen appears in the lower right hand corner
of my monitor: "Cancel Print Job". How do I prevent this
popup from displaying?
Dell 690, WinXP-Pro
Sincerely,
Ralphgold

Hi @TJBar, and welcome to the HP Forums!
I see you're looking into how to cancel your print jobs. I would like to assist.
When printing, on the front panel of your printer you will see a large red 'X'. This will allow you to cancel any print jobs by touching the X.
Please let me know if you have any questions. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

How to cancel print job with control panel on HP8610

Is there a way to cancel a print using the control panel of the HP8610 rather than using task manager?
This question was solved.
View Solution.

Welcome to the forums LucyRicky!
I understand you are looking to cancel print jobs with your Officejet 8610. I have found 2 guides for you to show you how to cancel them.
Windows: Cancel printing
Mac: Archived - Mac OS X: How to Delete Printers and Print Job Lists in the Print Center
I hope that helps resolve your question.
Happy Thursday
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Hp deskjet keeps printing alignment page

Hi:
Since i changed operating systems from WindowsXP32bit to Windows7 64bit, my printer keeps printing alignment pages. It will do it when i power on the printer, and it will do it after each printout. So far ive looked at HP's deskjet page. The HP Toolbox software isnt supported by Windows7, meaning that the handy print alignment and cartridge ink level software cant be used. I went to Hp's print alignment page ,they give you steps on what buttons to press on the printer to print an alignment page, to clean the printheads,print a print quality diagnostic page [which didnt work] ,and also to calibrate linefeed. I also cleaned the ink cartridges and removed any dry ink on them.
None of that seemed to help. Does anyone know a solution to this? [this printer does not have a scanner by the way].
I like this printer, and since theres no "windows7 compatible" HP inkjet printers available at this time, id like to keep this one.
Thanking you

The driver for the Deskjet 5150 is delivered though Windows Update as described here. The Deskjet 5550 driver would also be compatible, I would recommend the HP version rather than the earlier Microsoft version.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Can't do printer alignment test

I changed out the ink in my printer and went to do a printer alignment test and I am not able to perform the test. A message comes up that says my printer is in an error state and it has to be fixed before I can do the test. I am not sure what the error is, so I don't know how to fix it. I can print pages, but I need to do the test because there is a little bit of smearing of the ink when it prints. Any suggestions?

Hello jazzy3,
Welcome to the HP Forums.
I see that after changing the cartridges for your printer, you are trying to get the printer to do an alignment but can't due to an error state message. I will do my best to help you with the issue.
Where is the message coming up stating the printer is in an error state? If this is on the computer, have you checked the printer (provided it has a screen) for a message, or even blinking lights?
Which printer do you have? If you could provide the model number that would help greatly. (Finding Your HP Product Model Number)
That information would help me with providing you more accurate steps and suggestions for your issue. I look forward to your reply.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Can not cancel print job hp officejet 8500 in windows 8

I can not cancel print job for a HP officejet 8500 in windows 8
This question was solved.
View Solution.

Hi,
From the Desktop, hold down the Windows key and press R. Into the Run window, type services.msc and hit enter. Browse down to the print spooler service, right click it and select Properties then click on the Stop button. Now browse to C:\Windows\System32\Spool\PRINTERS and delete the job inside this folder - You may need to click a prompt to gain the appropriate authority to open the PRINTERS folder.
Restart the computer and you should find the document(s) have been removed.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Hp deskjet ink advantage 3545 printer alignment error

ON screen showing now printing alignment page
nothing process

Hello @OVTL
Welcome to the HP community,
I read your message about the alignment page not printing when the screen displays that it is. I would personally think that there could be an ink cartridge problem causing the alignment page not to print and I have a few suggestions for you to try.
1. Reset the Printer and try printing the alignment page again:
Press the Power button to turn on the product.
With the product turned on, disconnect the power cord from the rear of the product.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord back into the wall outlet.
Reconnect the power cord to the rear of the product.
If the product does not turn on by itself, press the Power button to turn it on.
2. Follow the steps shown in this guide for ink cartridge issues: A 'Cartridge Missing' or 'Incompatible Ink Cartridges' Error Message Displays for HP ENVY 4500 e-All...
If the alignment page will still not print, please give us a call to see what your printer options are:
Please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
Have a wonderful day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

I have a Canon MG6360 but error message says to cancel printing. How do I cancel print job from my iPad. Help please

I Have a Canon MG6360 air printer but unable to print last job. Error message says to cancel printing but how do I do this from my iPad? Help welcome please.

My hotmail was working properly until one month ago , then I do not what happens ... My mistake has been to cancel that account and try to re-load it... I am blocked at "unable to verify account details".
I read and follow carefully all your steps here above but it is not working!!
I also try to ask securiry code to mocrosoft and put it instead of hotmail password when creating new Ipad account but nothing.
I try to go everywhere on microsfot pages and on my mail account setting but I can not find any help from there. From PC is working
I try to choose "other" from the list of account and insert there hotmail account, both indicated adsHOTMAIL or OUTLOOK, but in this case it tells me "username or password for POP3.live.com are uncorrect.... what is POP3.live.com??
I already try everything find in the net here and elsewhere ... I have hotmail account since years can not thik to change it .... Some other help?? Some indication I have not yet try?
Why does not appear OUTLOOOK from the choice of default account in the "add account section"????!??!????

HP 2110 cancel print alignment

Similar Messages

Maybe you are looking for