Hp 2133 mini audio device does not appear

I've got a hp 2133 mini,audio doesnt appear on windows xp but its working on ubuntu?can you give me some advice what to do?thanks

Heureka! since iTunes update 12.0.1 everything is working flawlessly

Similar Messages

  • I have music on my iTunes library that I want to put on my iPhone 4S, but when I plug in my phone to my computer, my device does not appear in iTunes. It is connected to my computer, but iTunes won't recognize it...

    I have music on my iTunes library that I want to put on my iPhone 4S, but when I plug in my phone to my computer, my device does not appear in iTunes. It is connected to my computer, but iTunes won't recognize it... I have restarted my phone and computer, uninstalled itunes and reinstalled it, and punched a wall. idk what to do..

    Unplug your Iphone out of your computer and replug it back in. It took me several times before I could do this

  • TS4006 Device does not appear in device list

    Device does not appear on device list

    Welcome to the Apple Support Communities
    It happens when you haven't registered that device in Find my iPhone. In the device you want to use with Find my iPhone, log in iCloud following these steps > http://www.apple.com/icloud/setup Then, turn on Find my iPhone, and the device will show up in the device list

  • The device does not appear in the application find my iphone

    The device does not appear in the application find my iphone. Because of this I can not lock my ipod 5

    Try
    iCloud.com from a computer
          Select the Find My iPhone green circle
               Top center select All Devices
    Note is it shows here you can remove it from here too.
    If it's not there it's linked to a different Apple ID

  • My device does not appear in the iTunes window.  Instead a separate window opens so I cannot sync

    My device does not appear in the iTunes window.  Instead a separate window opens so I cannot sync my device.  I have tried with both my iPad, my iPod and my iPhone.  In each case a separate window opens showing that it is fully connected to the computer, but it does not open in iTunes. 
    I have followed previous instructions to stop then start the device manager.  I have even uninstalled then reinstalled iTunes, but no luck.  Can someone help??

    Hello Linda Lev,
    It sounds like Windows recognizes that your devices are conneted, but iTunes does not. I recommend the troubleshooting from the article named:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Thank you for using Apple Support Communities.
    Take care,
    Sterling

  • Ipod shuffle 4th gen device does not appear in latest version iTunes

    ipod shuffle 4th gen device does not appear in latest version iTunes

    Mine is not recognized by PC-Windows, nor Itunes, and not by the "Mass Storage Device" removal Icon.  I've done all the diagnostic tests, Uninstalled Itunes then reinstalling, etc.etc to no avail. Yet never had a problem with old generation Ipod, (died of old age) and Gloria's Ipod after two plus years is going strong with never an issue.  I belive Apple is having significant problems with the 3/8 inch shorter newest Ipod generation.  If your Ipod is still under warranty you need to call Apple support.  

  • HT4259 I have my airport extreme plugged in within range but the device does NOT appear in airport utility (on the left).  Please advise.

    To extend wifi range, I plugged in my airport extreme within exisitng range but the device does not appear in my airport utility (on the left of the screen).  The airport extreme is blinking amber.  Please advise. Thank you.

    The AirPort Extreme can extend the signal from another Apple router wirelessly, so as long as you have a 802.11n version of the products, the extend function should work.
    Please check to locate the Model No of both of your AirPort routers. It will be on the bottom of the device. Starts with an "A" followed by four numbers, as in "A x x x x".
    Post back with that info.
    We also need to know the version of AirPort Utility that you are using. If you are not sure, click the AirPort Utility menu in the upper left corner of the screen, then click About AirPort Utility and post back with tht info as well.

  • TS1538 When I open itunes, "Devices" does not appear at all in the left column on the screen, therefore I can not sync my ipod touch.

    When I open itunes, "Devices" does not appear t all in the left column on the screen. I can not sync my ipod with my itunes library. Suggestions?

    If you  have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar

  • TS4006 Device does not appear in Find My iPhone and I tried all the options on the support page. What next?

    Device does not appear in Find My iPhone and I tried all the options on the support page. What next?

    Is the device lost or stolen? If so it may be turned off, not connected to the internet, and/or have a dead battery in which case it may never appear.
    The what next is then covered in:
    If your iPhone, iPad, or iPod touch is lost or stolen
    Reporting a lost or stolen Apple product

  • When trying to backup and sync my ipad and iphone with itunes the device does not appear int he upper right hand corner anymore

    when trying to backup and sync my ipad and iphone to itunes it does not appear in the upper right hand corner under devices for me to click on

    In that same window - the one where you see your backups - click on the box at the bottom that say -Prevent iPods, iPhones and iPads form syncing automatically. Then click OK and quit iTunes.
    Connect your iPad to the computer and launch iTunes. Right click on the iPad name on the left side under the devices heading and select - Restore from backup. A window will pop up from which you can select any of the backups that you have for the iPad. Select the backup that you want to restore from and then go agreed and restore the iPad. Sync with iTunes when you are done.
    Remember that when you restore from a backup - you restore everything in that backup to the iPad. You cannot selectively restore content. It is all or none.

  • My device does not appear when I plug it in to my I tunes?

    My device does not show up when I plug it in to I tunes?

    My device does not show up when I plug it in to I tunes?

  • IOS device does not appear in WIFI sync in iTunes

    It's been six years now that I had inserted the persistent ID of my main computer into iTunes of my second computer in the iTunes Library.xlm and iTunes Library.itl. So I could also copy content of the second computer via USB to the IOS device. Wi-Fi sync was ONLY activated on the main computer.This has worked for a long time, until:
    Wireless sync: After a certain update of OSX or iTunes in the past, the IOS devices no longer appeared in the main computer in the sidebar of iTunes.
    Now I wanted to undo the whole thing. The recovery of the original persistent ID of the second computer did not work. It was constantly reconstructing the persistent ID of the main computer.
    I have now reinstalled iTunes, created a new iTunes library and re-imported the audio / video data. iTunes Library now also has a new persistent ID.
    Unfortunately, it still does not work. Only when I turn off the second computer and reboot the main computer, the IOS devices via Wi-Fi sync appear in the sidebar of the main computer. Once the second computer is back online, the devices disappear from the sidebar.
    Console reported besides others duplicate entries in the application (i.e. MUX ID not found in directory mapping)
    The second computer must have noticed somewhere that iOS devices have been connected with it. But where?
    Who can help?
    PS: system on both machines = OS 10.9.4, iTunes 11.4

    Heureka! since iTunes update 12.0.1 everything is working flawlessly

  • Device does not appear

    Hi there. I've got a Kobo eReader and I can't seem to make it appear when I open digital editions. I've spent several hours trying. What am I doing wrong?

    Dear Concern,
    Thanks a lot !
    I have updated Campus manager version 4.06 to 4.0.13 and also common services 3.0.4 to 3.0.5 . After updating, devices that was missing earlier in the topology view are now coming in the topology view.
    But still there is a problem few links are not showing in the topology map.
    for example : One device has three links two links are showing but left one does not.
    Please help me . This is an urgent issue.

  • "Devices" does NOT appear in itunes and my itouch cannot be detected, help?

    For some unknown reason my itouch just quit syncing with itunes. I bought a new sync cord to no avail. I removed itunes from my laptop as directed and reinstalled. No change. In fact, itunes help, directs to reinstall the device only there is no "Devices" option anywhere in itunes. Under "File" and "Sync ipod" all of those options are grayed out. What must be done to fix this problem?

    I'm having the same issues. my ipod Touch does not show as a device in itunes on my Mac nor my PC. I have successfully synced my touch on the PC before, but not itunes doesn't show it ! help !
    I've updated latest version of itunes on my PC. Can't update to itunes 10 on Mac because of OS I have.
    Robin

  • Audio Waveform does not appear

    I'm having trouble with getting the audio waveform to show up in the project window.  I want to fade out music, but the option is not available because my audio clips do not have a waveform, only a solid green line (see pic below) --no matter what type of audio I put in.  Selecting the 'Show / Hide Waveforms' Option does not make a difference in the project window; it shows the waveform in the event window only.  Any ideas would be great!

    Hi,
    Tobimusic wrote:
    Well, I found the command but it was not applyable. Text is dimmed. Tried Update File Information but that made no difference.
    The file (not the region) needs to be selected for the option to be appliable.
    Tobimusic wrote:
    The graphic is well shown in the imported files but not in the newly recorded file.
    Yes, because the recording delay preference applies to recorded audio only.
    Tobimusic wrote:
    I´ll try the recording tip later today and come back on that. Perhaps that also fixes the tendency of delay in recording. (Forgot to write that earlier. )
    Yes, it will fix both problems.
    J.

Maybe you are looking for

  • How to call formhandler handler method using js onclick function

    I need to call formhandler handle method when user clicks on a link. I want to call that method in js function. any help will be appreciated.

  • I/o su PXI

    Buongiorno sto lavorando ad un progetti di tipo HIL. Ho sviluppato un modello in simulink, il quale gira correttamente (tramite l'apposita .dll) sia sul mio computer che sul dispositivo PXI (modello 1042Q). Tuttavia rimane un problema: non sono riusc

  • Web Services Return 403

    I am porting a web service from WLS 8.1 to 10.0. It deploys okay, but when I try to link to the WSDL using links found in the console's 'test' section I get a 403. The entire endpoint reference looks fine. Does anyone know why I should be getting thi

  • Zooming in on Final Cut Express 4

    How do I zoom in on Videos in Final Cut Express 4? What I mean is like I have a video and I want to zoom in on someone to let people see who the person is. Like if theres a school photo I want it the whole picture Zoom in on myself then zoom back to

  • Softwareupdate crash missing libFontParser.dylib

    ProductName: Mac OS X Server ProductVersion: 10.6.8 BuildVersion: 10K540 bash-3.2# softwareupdate -l dyld: Library not loaded: /System/Library/Frameworks/ApplicationServices.framework/Versions/A/Frameworks/ ATS.framework/Versions/A/Resources/libFontP