HP 2159m Monitor
I have dual HP 2159m monitors. Somehow my second monitor has become an analog monitor in its settings and I don't know how to covert it back to an HP 2159m in the settings. I have right-clicked on the monitor, set it as an HP 2159m monitor, but it reverts back to analog as soon as I click 'ok'.
This question was solved.
View Solution.
Hi,
Be sure to have only one active input to the monitor.
Select the Menu button on the lower right edge then toggle down to Source Control then Default Source. Select your preferred default and be sure to save when you exit.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT
Similar Messages
-
Hp 2159m Monitor is Set to 100 Brightness and is Dull
Im' using Windows 8 - 64 bit. Brightness is set to 100 and is till too dull. How can I boost the brightness?
Hello Susankaye,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that the brightness on your monitor is set to 100 and is too low and you are looking for help getting it brigher. I would be happy to assist you, but first I would encourage you to post your product number for your computer. I am linking an HP Support document below that will show you how to find your product number. As with this I can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Please re-post with the requested information and I would be happy to provide you with assistance. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
HP 2159M External Monitor - What gives?
I recently purchased an HP 2159m monitor, after hearing good reviews about it from people on this and other forums who use macs. I also purchased a Mini Displayport to HDMI adaptor from monoprice, and have the monitor all connected to my Macbook Pro.
Occasionally, my macbook's screen will flash baby blue when connected, and the monitor says it's connected, however in System Preferences the Macbook Pro does not recognize the monitor and says no external monitor is connected. Thinking drivers might perhaps fix it, I looked online and found that there are no OS X drivers for this monitor.
What gives? How are other people using this monitor when it apparently seems mac-incompatible for me? I've never even heard of a monitor being incompatible with a Mac.
Has anyone with a similar problem found a solution? HP technical support simply said sorry we don't have a driver for you, talk to the store you bought the monitor from.Sorry for reviving this thread from the dead, but I found a workaround and wanted to share it:
As mentioned on https://bugs.launchpad.net/ubuntu/+sour … bug/796030 this is a known(?) bug with Kernel versions newer than 2.6.34.
So after downgrading to this version I was able to use the full resolution of the screen, but with a ~ 200pixel wide stripe missing between the monitors (External left of internal => virtual Screen of 3200*1200) and a equally sized stripe of the most left screen on the most right side. This stripe was only missing for the screen, but not for the mousecursor => If I wanted to press a button I had to press it ~200pixel right of it
(But I was able to use Composite Effects in Compiz)
This was resolved by disabling Composite in xorg.conf
not the full xorg.conf
Section "Extensions"
Option "Composite" "Disable"
EndSection -
I have an HP 2159m monitor and over the past weeks have been using it for both my computer (DVI Connection) and my Playstation 3 (HDMI Connection) video outputs. At first everything was fine and working great. Now after about 3 weeks the DVI connection is completely fine but the PS3 to 2159m connection via HDMI cable is not working. When the monitor auto scans it says it's recieving a signal from the PS3 through HDMI and lists is as active but when I switch to this display it is always blank and there is no audio. I have tried setting the monitor to factory defaults, downloading the newest driviers, changing various PS3 settings as well as testing the HDMI cable as well as the HDMI ports of the PS3 and 2159m monitor seperately and both seem to work fine. I have heard of this problem before with o solutions so far. Is there anything that can be recommend for fixing this issue??
Ryan,
Try a monitor reset. It has worked for some with the a PS3. Unplug the monitor and hold down the power button for 30-60 seconds. Now plug the monitor back in and give it a go. Only connect one video cable to the monitor.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
Hp 2159 m compatibility with windows 8.1
I have recently purchased a new HP Pavilion 500 computer with Windows 8.1. I have an existing HP 2159m monitor (2009 model) which works perfectly - except it is not compatible with Windows 8.1.
I have attempted to download (from disc and on-line) the drivers for the monitor, however the Monitor does not show up in the screen resolution options.
I have spent two hours with an HP technician (paid) and no solution.
Any suggestions?Hi,
Please post the HP product number for your PC.
How to Find the HP Model Number and the HP Product Number or let HP automatically find your PC model number and HP network attached printers.
There is not a known compatiblity issue with the HP 2159m and Windows 8.1. I am using the HP 2159m with Windows 8.1, Windows 8 and Windows 7.
The HP 2159m monitor driver should install without issue. Use the driver listed under Windows 7 64 bit or 32 bit whichever applies to your situation. When installing the driver, right mouse click and select run as administrator. You need to be the PC admin.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
Windows latest forced nVidia update not compatible with HP Firebird PC
The latest windows update is including an "Important" October 2012 update from Nvidia that is not compatible with the Firbird's graphics. It completely trashes the graphics and will only run in the low-power hybrid mode. I re-installed the HP driver, only to have it reset again by the Windows update and had to do it all over again. If anyone is having this problem, make sure you disable the nVidia update.
(Firbird 803, Vista-64)I'm using Windows 7 but I assume Vista works more or less the same.
Select Windows Control Panel, System, Advanced System Settings, Hardware, Device Installation Settings, Never install driver software from Windows Update and Save Changes.
Select Windows Update and Check for Updates. Right-Click any Nvidia drivers and select Hide Update.
2 x HP Firebird 802 + 2 x HP 2159m monitor + Windows 7 Home Premium + Windows 8.1 Pro with Media Center
GeForce Driver Version 266.58 WHQL installs correctly without modification.
GeForce Driver Version 296.10 WHQL requires modified NV_DISP.INF file to install correctly but Nvidia Control Panel is broken.
GeForce Driver Version 340.52 WHQL requires modified NV_DISP.INF file to install correctly but 2-way SLI is broken. -
HP monitor 2159m Black after 2 sec.
Hello,
My monitor a Hp 2159m is working perfect for a lot of years now.
But I have a problem now! When I turn my screen on (don't matter wich computer it is connected to) after 2
seconds it turns black. It is not on a specific moment in the startingproces of the computer, or login screen always.
I cleaned al conection points and I used diffrent cables and computers. It is clearly a problem in the screen.
Can you help?
Yours Faithfully,
StijnHi,
Did you try a monitor reset?
Power off the monitor and PC. Unplug the monitor from the PC and the electrical power. Now hold down the power button on the monitor for 60 seconds. Plug everything back in and power up the monitor and PC. You may have to set the Source input in the monitor's menu. Only use one active video source input and set that as the default in the monitor's menu.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
HP monitors not Mac compatible?
Hi all.
This has come up before (http://discussions.info.apple.com/message.jspa?messageID=10776106) and in other forums. You plug an HP monitor into your MacBook Pro (I'm using DVI) and the screen periodically flashes blue, but there's no recognition of the monitor. I'm using an HP 2159m.
What gives?Just to leave a not-so-related solution here if anyone searches for "hdmi problems with HP 2159m."
In case anyone has an overscan issue (blurry text, underscan adjustment doesn't help, etc.) using the Mac Mini HDMI port, the solution is weird but simple.
Turn on your Mac and plug in the monitor and the image is crappy.
Turn off the monitor.
Press and hold the monitor's power button until the image shows up.
Try it a few times if it doesn't work. It works like a charm for me.
Thanks Apple for removing the "disable overscan" option from the display panel for PC monitors. -
Can I connect an HP2159m monitor to an HP probook6550b and if so how, as the cable to the desk top is not the right size.
Thanks for the assist.Hi,
The HP Probook 6550b has a display port and a VGA port. The HP 2159m has HDMI, DVI and VGA ports. A native VGA cable should work. If you wanted a digital video to the HP 2159m then you could try a display port to HDMI adapter with a native HDMI cable. http://h30094.www3.hp.com/product/sku/10264196
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT -
Monitor black after coming out of sleep mode
Every time my computer goes into sleep mode, after 5 minutes i think is what it set at, the screen is black. I can see the desktop on each side of the black part of the screen, but only about a 1/16th of an inch. I have to turn off, then back on the screen to get the picture. It doesnt seem to make any difference what i have for settings for the sleep time. Only if i turn off sleep mode of course. Ive downloaded all the updates but no success. This is a problem ive had for years just thought id take another crack at it. The monitor is a 2159m. Its about 6 or 7 years old now, but still this is very annoying. Any thing you can do to help would be greatly appreciated.
This question was solved.
View Solution.Thank you for the response. This issue could potentially have numerous causes, so I will suggest multiple troubleshooting avenues.
First, your Windows 7 might perform "hybrid sleep" instead of the regular sleep mode. This would illustrate the exact situation you have explained. For instructions on verifying, enabling, and disabling hybrid sleep mode, please reference this website: http://maximumpcguides.com/windows-7/turn-off-hybrid-sleep-in-windows-7/
If this does not resolve the issue, the next troubleshooting step will be restoring the power defaults to normal settings. To perform this task, go to the start menu, type “CMD” in the search bar. Now, you should see a shortcut for CMD above. Right click on it, and click “run as administrator”. If it asks you for administrative permission, please allow permission.
You should see Command Prompt open. Type the following command in this window and hit Enter afterward (without the quotations): "powercfg -restoredefaultschemes"
Restart the computer afterward and observe what happens. If the issue persists, this is next command I require you to enter in Command Prompt as administrator (without the quotations): "sfc /scannow".
This will take a series of minutes to complete. Running this might find a corrupted file or service and repair it. After it completes it will basically say either no corrupted files were found, corrupted files were found and repaired, or corrupted files were found but were unable to be repaired. Restart after this completes and observe the results.
If the issue still persists, the next step will be performing a hard reset on the desktop. To do this, turn off the computer, and unplug all cables attached to the tower and monitor (including all power sources) for a few minutes. Plug all the cables back in and turn on the computer, and see if the issue persists.
if the issue is not eliminated, I would attempt all pertinent troubleshooting steps in these HP documents below (since they address causes for black screens in various situations):
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01881110 (this document is specific to notebooks, so please follow all relevant troubleshooting)
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bph04760
If the issue is not resolved, you are likely experiencing a hardware failure. At that point you should contact HP technical support for additional information. You can utilize this website to locate the most suitable number, based on your region: http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
Please let me know if you found this information useful by marking it with a Kudos and Accepted Solution, and others will be able to locate this information easier. Please inform me with your results, and any additional questions or concerns. I will look forward to your response.
Mario
I worked on behalf of HP. -
Issues with using 3 monitors on 2 external gpu
Hi,
I have some issues with configuring Xorg to use 3 monitors. I have 2 external graphic cards (same model, no SLI). Monitors connected to the first gpu are recognized ok but I can't configure my 3rd monitor conencted to the second gpu via HDMI nor DVI.
1st is recognized as DVI-I-1, 2nd is DP-1 in first card, 3rd monitor is in second card (bus 22:00.0) as DP-1-2 (also tried connecting as DVI-I-2). I can see them in Xorg log but I can't configure my 3rd monitor via kscreen nor xrandr. :-/
lspci |grep VGA:
03:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)
22:00.0 VGA compatible controller: NVIDIA Corporation GF108GL [Quadro 600] (rev a1)
xrandr:
Screen 0: minimum 320 x 200, current 3840 x 1080, maximum 8192 x 8192
DVI-I-1 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 527mm x 297mm
1920x1080 60.0*+
1600x900 60.0
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
DP-1 connected 1920x1080+1920+0 (normal left inverted right x axis y axis) 527mm x 297mm
1920x1080 60.0*+
1600x900 60.0
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
Xorg config (autoconfig enable only 2 monitors, I generated config and tried to edit it with no luck, I noticed there is PCI:34:0:0 generated by Xorg so I also tried to change it to 22:0:0, I also tried to add that option "Monitor-<output>" but same result):
Section "ServerLayout"
Identifier "X.org Configured"
#Screen 0 "Screen0" 0 0
#Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "DELL"
Option "Monitor-DVI-I-1" "DVI-I-1"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "DELL"
Option "Monitor-DP-1" "DP-1"
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "DELL"
Option "Monitor-DP-1-2" "DP-1-2"
EndSection
Section "Device"
Identifier "Card0"
Driver "nouveau"
BusID "PCI:3:0:0"
Option "Monitor-DVI-I-1"
Option "Monitor-DP-1"
EndSection
Section "Device"
Identifier "Card1"
Driver "nouveau"
BusID "PCI:34:0:0"
Option "Monitor-DP-1-2"
EndSection
Xorg log (I can see that monitor at time 1767.316):
[ 1766.959]
X.Org X Server 1.14.5
Release Date: 2013-12-12
[ 1766.960] X Protocol Version 11, Revision 0
[ 1766.960] Build Operating System: Linux 3.12.5-1-ARCH x86_64
[ 1766.960] Current Operating System: Linux CZ09DT1XM5002 3.12.5-1-ARCH #1 SMP PREEMPT Thu Dec 12 12:57:31 CET 2013 x86_64
[ 1766.960] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=e2c593e5-b0f4-4c74-84fd-5a88db345ca4 rw quiet
[ 1766.961] Build Date: 13 December 2013 03:11:42PM
[ 1766.962]
[ 1766.962] Current version of pixman: 0.32.4
[ 1766.963] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1766.963] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1766.965] (==) Log file: "/var/log/Xorg.1.log", Time: Thu Jan 2 12:43:56 2014
[ 1766.965] (++) Using config file: "/etc/X11/xorg.conf.d/20-multimonitor.conf"
[ 1766.966] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1766.966] (==) ServerLayout "X.org Configured"
[ 1766.966] (==) No screen section available. Using defaults.
[ 1766.966] (**) |-->Screen "Default Screen Section" (0)
[ 1766.966] (**) | |-->Monitor "<default monitor>"
[ 1766.966] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1766.966] (**) | |-->Device "Card0"
[ 1766.966] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1766.966] (**) |-->Input Device "Mouse0"
[ 1766.966] (**) |-->Input Device "Keyboard0"
[ 1766.966] (==) Automatically adding devices
[ 1766.966] (==) Automatically enabling devices
[ 1766.966] (==) Automatically adding GPU devices
[ 1766.966] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1766.966] Entry deleted from font path.
[ 1766.966] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1766.966] Entry deleted from font path.
[ 1766.966] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1766.966] Entry deleted from font path.
[ 1766.966] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1766.967] Entry deleted from font path.
[ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1766.967] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1766.967] Entry deleted from font path.
[ 1766.967] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1766.967] Entry deleted from font path.
[ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1766.967] Entry deleted from font path.
[ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1766.967] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1766.967] Entry deleted from font path.
[ 1766.967] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1766.967] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 1766.967] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 1766.967] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 1766.967] (WW) Disabling Mouse0
[ 1766.967] (WW) Disabling Keyboard0
[ 1766.967] (II) Loader magic: 0x7fec20
[ 1766.967] (II) Module ABI versions:
[ 1766.967] X.Org ANSI C Emulation: 0.4
[ 1766.967] X.Org Video Driver: 14.1
[ 1766.967] X.Org XInput driver : 19.1
[ 1766.967] X.Org Server Extension : 7.0
[ 1766.967] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1766.967] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 1767.169] (--) PCI:*(0:3:0:0) 10de:0df8:10de:0835 rev 161, Mem @ 0xc6000000/16777216, 0xc8000000/134217728, 0xd0000000/33554432, I/O @ 0x00007000/128, BIOS @ 0x????????/524288
[ 1767.169] (--) PCI: (0:34:0:0) 10de:0df8:10de:0835 rev 161, Mem @ 0xfa000000/16777216, 0xf0000000/134217728, 0xf8000000/33554432, I/O @ 0x0000f000/128, BIOS @ 0x????????/524288
[ 1767.169] Initializing built-in extension Generic Event Extension
[ 1767.170] Initializing built-in extension SHAPE
[ 1767.170] Initializing built-in extension MIT-SHM
[ 1767.170] Initializing built-in extension XInputExtension
[ 1767.171] Initializing built-in extension XTEST
[ 1767.171] Initializing built-in extension BIG-REQUESTS
[ 1767.172] Initializing built-in extension SYNC
[ 1767.172] Initializing built-in extension XKEYBOARD
[ 1767.172] Initializing built-in extension XC-MISC
[ 1767.173] Initializing built-in extension SECURITY
[ 1767.173] Initializing built-in extension XINERAMA
[ 1767.174] Initializing built-in extension XFIXES
[ 1767.174] Initializing built-in extension RENDER
[ 1767.174] Initializing built-in extension RANDR
[ 1767.175] Initializing built-in extension COMPOSITE
[ 1767.175] Initializing built-in extension DAMAGE
[ 1767.175] Initializing built-in extension MIT-SCREEN-SAVER
[ 1767.176] Initializing built-in extension DOUBLE-BUFFER
[ 1767.176] Initializing built-in extension RECORD
[ 1767.176] Initializing built-in extension DPMS
[ 1767.177] Initializing built-in extension X-Resource
[ 1767.177] Initializing built-in extension XVideo
[ 1767.177] Initializing built-in extension XVideo-MotionCompensation
[ 1767.178] Initializing built-in extension XFree86-VidModeExtension
[ 1767.178] Initializing built-in extension XFree86-DGA
[ 1767.178] Initializing built-in extension XFree86-DRI
[ 1767.179] Initializing built-in extension DRI2
[ 1767.179] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 1767.179] (II) LoadModule: "glx"
[ 1767.179] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1767.179] (II) Module glx: vendor="X.Org Foundation"
[ 1767.179] compiled for 1.14.5, module version = 1.0.0
[ 1767.179] ABI class: X.Org Server Extension, version 7.0
[ 1767.179] (==) AIGLX enabled
[ 1767.180] Loading extension GLX
[ 1767.180] (II) LoadModule: "nouveau"
[ 1767.180] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 1767.180] (II) Module nouveau: vendor="X.Org Foundation"
[ 1767.180] compiled for 1.14.4, module version = 1.0.10
[ 1767.180] Module class: X.Org Video Driver
[ 1767.180] ABI class: X.Org Video Driver, version 14.1
[ 1767.180] (II) NOUVEAU driver
[ 1767.180] (II) NOUVEAU driver for NVIDIA chipset families :
[ 1767.180] RIVA TNT (NV04)
[ 1767.180] RIVA TNT2 (NV05)
[ 1767.180] GeForce 256 (NV10)
[ 1767.180] GeForce 2 (NV11, NV15)
[ 1767.180] GeForce 4MX (NV17, NV18)
[ 1767.180] GeForce 3 (NV20)
[ 1767.180] GeForce 4Ti (NV25, NV28)
[ 1767.180] GeForce FX (NV3x)
[ 1767.180] GeForce 6 (NV4x)
[ 1767.180] GeForce 7 (G7x)
[ 1767.180] GeForce 8 (G8x)
[ 1767.180] GeForce GTX 200 (NVA0)
[ 1767.180] GeForce GTX 400 (NVC0)
[ 1767.180] (--) using VT number 3
[ 1767.182] (II) [drm] nouveau interface version: 1.1.1
[ 1767.183] (II) [drm] nouveau interface version: 1.1.1
[ 1767.183] (II) Loading sub module "dri2"
[ 1767.183] (II) LoadModule: "dri2"
[ 1767.183] (II) Module "dri2" already built-in
[ 1767.183] (--) NOUVEAU(0): Chipset: "NVIDIA NVC1"
[ 1767.183] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1767.183] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 1767.183] (==) NOUVEAU(0): RGB weight 888
[ 1767.183] (==) NOUVEAU(0): Default visual is TrueColor
[ 1767.183] (==) NOUVEAU(0): Using HW cursor
[ 1767.183] (==) NOUVEAU(0): GLX sync to VBlank disabled.
[ 1767.183] (==) NOUVEAU(0): Page flipping enabled
[ 1767.183] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
[ 1767.222] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
[ 1767.230] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 1767.265] (II) NOUVEAU(0): EDID for output DVI-I-1
[ 1767.265] (II) NOUVEAU(0): Manufacturer: DEL Model: a09b Serial#: 827608652
[ 1767.265] (II) NOUVEAU(0): Year: 2013 Week: 41
[ 1767.265] (II) NOUVEAU(0): EDID Version: 1.3
[ 1767.265] (II) NOUVEAU(0): Digital Display Input
[ 1767.265] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 1767.265] (II) NOUVEAU(0): Gamma: 2.20
[ 1767.265] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
[ 1767.265] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1767.265] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 1767.265] (II) NOUVEAU(0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
[ 1767.265] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 1767.265] (II) NOUVEAU(0): Supported established timings:
[ 1767.265] (II) NOUVEAU(0): 720x400@70Hz
[ 1767.265] (II) NOUVEAU(0): 640x480@60Hz
[ 1767.265] (II) NOUVEAU(0): 640x480@75Hz
[ 1767.265] (II) NOUVEAU(0): 800x600@60Hz
[ 1767.265] (II) NOUVEAU(0): 800x600@75Hz
[ 1767.265] (II) NOUVEAU(0): 1024x768@60Hz
[ 1767.265] (II) NOUVEAU(0): 1024x768@75Hz
[ 1767.265] (II) NOUVEAU(0): 1280x1024@75Hz
[ 1767.265] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 1767.265] (II) NOUVEAU(0): Supported standard timings:
[ 1767.265] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1767.265] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1767.265] (II) NOUVEAU(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 1767.265] (II) NOUVEAU(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 1767.265] (II) NOUVEAU(0): Supported detailed timing:
[ 1767.265] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 527 x 297 mm
[ 1767.265] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1767.265] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1767.265] (II) NOUVEAU(0): Serial No: 36WJX3A91TNL
[ 1767.265] (II) NOUVEAU(0): Monitor name: DELL P2414H
[ 1767.265] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 1767.265] (II) NOUVEAU(0): EDID (in hex):
[ 1767.265] (II) NOUVEAU(0): 00ffffffffffff0010ac9ba04c4e5431
[ 1767.265] (II) NOUVEAU(0): 2917010380351e78eaa0a5a656529d27
[ 1767.265] (II) NOUVEAU(0): 0f5054a54b00714f8180a9c0d1c00101
[ 1767.265] (II) NOUVEAU(0): 010101010101023a801871382d40582c
[ 1767.265] (II) NOUVEAU(0): 45000f292100001e000000ff00333657
[ 1767.265] (II) NOUVEAU(0): 4a5833413931544e4c0a000000fc0044
[ 1767.265] (II) NOUVEAU(0): 454c4c205032343134480a20000000fd
[ 1767.265] (II) NOUVEAU(0): 00384c1e5311000a20202020202000c2
[ 1767.265] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
[ 1767.265] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1767.265] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 1767.265] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1767.265] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1767.273] (II) NOUVEAU(0): EDID for output DP-1
[ 1767.273] (II) NOUVEAU(0): Manufacturer: DEL Model: a09a Serial#: 844123724
[ 1767.273] (II) NOUVEAU(0): Year: 2013 Week: 41
[ 1767.273] (II) NOUVEAU(0): EDID Version: 1.4
[ 1767.273] (II) NOUVEAU(0): Digital Display Input
[ 1767.273] (II) NOUVEAU(0): 8 bits per channel
[ 1767.273] (II) NOUVEAU(0): Digital interface is DisplayPort
[ 1767.273] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 1767.273] (II) NOUVEAU(0): Gamma: 2.20
[ 1767.273] (II) NOUVEAU(0): DPMS capabilities: Off
[ 1767.273] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[ 1767.273] (II) NOUVEAU(0): First detailed timing is preferred mode
[ 1767.273] (II) NOUVEAU(0): Preferred mode is native pixel format and refresh rate
[ 1767.273] (II) NOUVEAU(0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
[ 1767.273] (II) NOUVEAU(0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 1767.273] (II) NOUVEAU(0): Supported established timings:
[ 1767.273] (II) NOUVEAU(0): 720x400@70Hz
[ 1767.273] (II) NOUVEAU(0): 640x480@60Hz
[ 1767.273] (II) NOUVEAU(0): 640x480@75Hz
[ 1767.273] (II) NOUVEAU(0): 800x600@60Hz
[ 1767.273] (II) NOUVEAU(0): 800x600@75Hz
[ 1767.273] (II) NOUVEAU(0): 1024x768@60Hz
[ 1767.273] (II) NOUVEAU(0): 1024x768@75Hz
[ 1767.273] (II) NOUVEAU(0): 1280x1024@75Hz
[ 1767.273] (II) NOUVEAU(0): Manufacturer's mask: 0
[ 1767.273] (II) NOUVEAU(0): Supported standard timings:
[ 1767.273] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1767.273] (II) NOUVEAU(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1767.273] (II) NOUVEAU(0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 1767.273] (II) NOUVEAU(0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 1767.273] (II) NOUVEAU(0): Supported detailed timing:
[ 1767.273] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 527 x 297 mm
[ 1767.273] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1767.273] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1767.273] (II) NOUVEAU(0): Serial No: 36WJX3A92PNL
[ 1767.273] (II) NOUVEAU(0): Monitor name: DELL P2414H
[ 1767.273] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 1767.273] (II) NOUVEAU(0): EDID (in hex):
[ 1767.273] (II) NOUVEAU(0): 00ffffffffffff0010ac9aa04c4e5032
[ 1767.273] (II) NOUVEAU(0): 29170104a5351e783aa0a5a656529d27
[ 1767.273] (II) NOUVEAU(0): 0f5054a54b00714f8180a9c0d1c00101
[ 1767.273] (II) NOUVEAU(0): 010101010101023a801871382d40582c
[ 1767.273] (II) NOUVEAU(0): 45000f292100001e000000ff00333657
[ 1767.273] (II) NOUVEAU(0): 4a5833413932504e4c0a000000fc0044
[ 1767.273] (II) NOUVEAU(0): 454c4c205032343134480a20000000fd
[ 1767.273] (II) NOUVEAU(0): 00384c1e5311000a2020202020200053
[ 1767.273] (II) NOUVEAU(0): Printing probed modes for output DP-1
[ 1767.273] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1767.273] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 1767.273] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1767.273] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1767.273] (II) NOUVEAU(0): Output DVI-I-1 connected
[ 1767.273] (II) NOUVEAU(0): Output DP-1 connected
[ 1767.273] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 1767.273] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
[ 1767.273] (II) NOUVEAU(0): Output DP-1 using initial mode 1920x1080
[ 1767.273] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1767.274] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1767.274] (**) NOUVEAU(0): Mode "1600x900": 119.0 MHz (scaled from 0.0 MHz), 55.9 kHz, 60.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1767.274] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[ 1767.274] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1767.274] (==) NOUVEAU(0): DPI set to (96, 96)
[ 1767.274] (II) Loading sub module "fb"
[ 1767.274] (II) LoadModule: "fb"
[ 1767.274] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1767.274] (II) Module fb: vendor="X.Org Foundation"
[ 1767.274] compiled for 1.14.5, module version = 1.0.0
[ 1767.274] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1767.274] (II) Loading sub module "exa"
[ 1767.274] (II) LoadModule: "exa"
[ 1767.274] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 1767.274] (II) Module exa: vendor="X.Org Foundation"
[ 1767.274] compiled for 1.14.5, module version = 2.6.0
[ 1767.274] ABI class: X.Org Video Driver, version 14.1
[ 1767.274] (II) Loading sub module "shadowfb"
[ 1767.274] (II) LoadModule: "shadowfb"
[ 1767.274] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 1767.274] (II) Module shadowfb: vendor="X.Org Foundation"
[ 1767.274] compiled for 1.14.5, module version = 1.0.0
[ 1767.274] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1767.274] (II) Loading sub module "dri2"
[ 1767.274] (II) LoadModule: "dri2"
[ 1767.274] (II) Module "dri2" already built-in
[ 1767.274] (--) NOUVEAU(G0): Chipset: "NVIDIA NVC1"
[ 1767.275] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
[ 1767.275] (==) NOUVEAU(G0): RGB weight 888
[ 1767.275] (==) NOUVEAU(G0): Default visual is TrueColor
[ 1767.275] (==) NOUVEAU(G0): Using HW cursor
[ 1767.275] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
[ 1767.275] (==) NOUVEAU(G0): Page flipping enabled
[ 1767.275] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
[ 1767.308] (II) NOUVEAU(G0): Output DVI-I-1-2 has no monitor section
[ 1767.316] (II) NOUVEAU(G0): Output DP-1-2 has no monitor section
[ 1767.339] (II) NOUVEAU(G0): EDID for output DVI-I-1-2
[ 1767.347] (II) NOUVEAU(G0): EDID for output DP-1-2
[ 1767.347] (II) NOUVEAU(G0): Manufacturer: DEL Model: a09a Serial#: 844124236
[ 1767.347] (II) NOUVEAU(G0): Year: 2013 Week: 41
[ 1767.347] (II) NOUVEAU(G0): EDID Version: 1.4
[ 1767.347] (II) NOUVEAU(G0): Digital Display Input
[ 1767.347] (II) NOUVEAU(G0): 8 bits per channel
[ 1767.347] (II) NOUVEAU(G0): Digital interface is DisplayPort
[ 1767.347] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 53 vert.: 30
[ 1767.347] (II) NOUVEAU(G0): Gamma: 2.20
[ 1767.347] (II) NOUVEAU(G0): DPMS capabilities: Off
[ 1767.347] (II) NOUVEAU(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 YCrCb 4:2:2
[ 1767.347] (II) NOUVEAU(G0): First detailed timing is preferred mode
[ 1767.347] (II) NOUVEAU(G0): Preferred mode is native pixel format and refresh rate
[ 1767.347] (II) NOUVEAU(G0): redX: 0.650 redY: 0.338 greenX: 0.320 greenY: 0.613
[ 1767.347] (II) NOUVEAU(G0): blueX: 0.154 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 1767.347] (II) NOUVEAU(G0): Supported established timings:
[ 1767.347] (II) NOUVEAU(G0): 720x400@70Hz
[ 1767.347] (II) NOUVEAU(G0): 640x480@60Hz
[ 1767.347] (II) NOUVEAU(G0): 640x480@75Hz
[ 1767.347] (II) NOUVEAU(G0): 800x600@60Hz
[ 1767.347] (II) NOUVEAU(G0): 800x600@75Hz
[ 1767.347] (II) NOUVEAU(G0): 1024x768@60Hz
[ 1767.347] (II) NOUVEAU(G0): 1024x768@75Hz
[ 1767.347] (II) NOUVEAU(G0): 1280x1024@75Hz
[ 1767.348] (II) NOUVEAU(G0): Manufacturer's mask: 0
[ 1767.348] (II) NOUVEAU(G0): Supported standard timings:
[ 1767.348] (II) NOUVEAU(G0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 1767.348] (II) NOUVEAU(G0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 1767.348] (II) NOUVEAU(G0): #2: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 1767.348] (II) NOUVEAU(G0): #3: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 1767.348] (II) NOUVEAU(G0): Supported detailed timing:
[ 1767.348] (II) NOUVEAU(G0): clock: 148.5 MHz Image Size: 527 x 297 mm
[ 1767.348] (II) NOUVEAU(G0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 1767.348] (II) NOUVEAU(G0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 1767.348] (II) NOUVEAU(G0): Serial No: 36WJX3A92PPL
[ 1767.348] (II) NOUVEAU(G0): Monitor name: DELL P2414H
[ 1767.348] (II) NOUVEAU(G0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 1767.348] (II) NOUVEAU(G0): EDID (in hex):
[ 1767.348] (II) NOUVEAU(G0): 00ffffffffffff0010ac9aa04c505032
[ 1767.348] (II) NOUVEAU(G0): 29170104a5351e783aa0a5a656529d27
[ 1767.348] (II) NOUVEAU(G0): 0f5054a54b00714f8180a9c0d1c00101
[ 1767.348] (II) NOUVEAU(G0): 010101010101023a801871382d40582c
[ 1767.348] (II) NOUVEAU(G0): 45000f292100001e000000ff00333657
[ 1767.348] (II) NOUVEAU(G0): 4a583341393250504c0a000000fc0044
[ 1767.348] (II) NOUVEAU(G0): 454c4c205032343134480a20000000fd
[ 1767.348] (II) NOUVEAU(G0): 00384c1e5311000a202020202020004f
[ 1767.348] (II) NOUVEAU(G0): Printing probed modes for output DP-1-2
[ 1767.348] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 1767.348] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1767.348] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
[ 1767.348] (**) NOUVEAU(G0): Mode "1920x1080": 173.0 MHz (scaled from 0.0 MHz), 67.2 kHz, 60.0 Hz
[ 1767.348] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync (67.2 kHz)
[ 1767.348] (==) NOUVEAU(G0): DPI set to (96, 96)
[ 1767.348] (II) Loading sub module "fb"
[ 1767.348] (II) LoadModule: "fb"
[ 1767.348] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1767.348] (II) Module fb: vendor="X.Org Foundation"
[ 1767.348] compiled for 1.14.5, module version = 1.0.0
[ 1767.348] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1767.348] (II) Loading sub module "exa"
[ 1767.348] (II) LoadModule: "exa"
[ 1767.348] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 1767.348] (II) Module exa: vendor="X.Org Foundation"
[ 1767.348] compiled for 1.14.5, module version = 2.6.0
[ 1767.348] ABI class: X.Org Video Driver, version 14.1
[ 1767.348] (II) Loading sub module "shadowfb"
[ 1767.348] (II) LoadModule: "shadowfb"
[ 1767.348] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 1767.348] (II) Module shadowfb: vendor="X.Org Foundation"
[ 1767.348] compiled for 1.14.5, module version = 1.0.0
[ 1767.348] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1767.348] (--) Depth 24 pixmap format is 32 bpp
[ 1767.351] (II) NOUVEAU(G0): Opened GPU channel 0
[ 1767.359] (II) NOUVEAU(G0): [DRI2] Setup complete
[ 1767.359] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
[ 1767.359] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
[ 1767.360] (II) EXA(256): Driver allocated offscreen pixmaps
[ 1767.360] (II) EXA(256): Driver registered support for the following operations:
[ 1767.360] (II) Solid
[ 1767.360] (II) Copy
[ 1767.360] (II) Composite (RENDER acceleration)
[ 1767.360] (II) UploadToScreen
[ 1767.360] (II) DownloadFromScreen
[ 1767.360] (==) NOUVEAU(G0): Backing store disabled
[ 1767.360] (==) NOUVEAU(G0): Silken mouse enabled
[ 1767.360] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 1767.360] (II) NOUVEAU(G0): [XvMC] Extension initialized.
[ 1767.360] (==) NOUVEAU(G0): DPMS enabled
[ 1767.360] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1767.360] (WW) NOUVEAU(G0): Option "Monitor-DVI-I-1" is not used
[ 1767.360] (WW) NOUVEAU(G0): Option "Monitor-DP-1" is not used
[ 1767.362] (II) NOUVEAU(0): Opened GPU channel 0
[ 1767.366] (II) NOUVEAU(0): [DRI2] Setup complete
[ 1767.366] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 1767.366] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 1767.366] (II) EXA(0): Driver allocated offscreen pixmaps
[ 1767.366] (II) EXA(0): Driver registered support for the following operations:
[ 1767.366] (II) Solid
[ 1767.366] (II) Copy
[ 1767.366] (II) Composite (RENDER acceleration)
[ 1767.366] (II) UploadToScreen
[ 1767.366] (II) DownloadFromScreen
[ 1767.366] (==) NOUVEAU(0): Backing store disabled
[ 1767.366] (==) NOUVEAU(0): Silken mouse enabled
[ 1767.366] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 1767.366] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 1767.366] (==) NOUVEAU(0): DPMS enabled
[ 1767.366] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1767.366] (--) RandR disabled
[ 1767.388] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1767.388] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1767.388] (II) AIGLX: enabled GLX_ARB_create_context
[ 1767.388] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1767.388] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 1767.388] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1767.388] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1767.389] (II) AIGLX: Loaded and initialized nouveau
[ 1767.389] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1767.390] (II) NOUVEAU(G0): NVEnterVT is called.
[ 1767.393] (II) NOUVEAU(0): NVEnterVT is called.
[ 1767.444] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
[ 1767.444] resize called 1920 1080
[ 1767.479] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 1767.479] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1767.479] (II) LoadModule: "evdev"
[ 1767.479] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1767.479] (II) Module evdev: vendor="X.Org Foundation"
[ 1767.479] compiled for 1.14.3, module version = 2.8.2
[ 1767.479] Module class: X.Org XInput Driver
[ 1767.479] ABI class: X.Org XInput driver, version 19.1
[ 1767.479] (II) Using input driver 'evdev' for 'Power Button'
[ 1767.479] (**) Power Button: always reports core events
[ 1767.479] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 1767.479] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1767.479] (--) evdev: Power Button: Found keys
[ 1767.479] (II) evdev: Power Button: Configuring as keyboard
[ 1767.479] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event2"
[ 1767.479] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1767.479] (**) Option "xkb_rules" "evdev"
[ 1767.479] (**) Option "xkb_model" "pc104"
[ 1767.479] (**) Option "xkb_layout" "us"
[ 1767.499] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 1767.499] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1767.499] (II) Using input driver 'evdev' for 'Power Button'
[ 1767.500] (**) Power Button: always reports core events
[ 1767.500] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 1767.500] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1767.500] (--) evdev: Power Button: Found keys
[ 1767.500] (II) evdev: Power Button: Configuring as keyboard
[ 1767.500] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event1"
[ 1767.500] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 1767.500] (**) Option "xkb_rules" "evdev"
[ 1767.500] (**) Option "xkb_model" "pc104"
[ 1767.500] (**) Option "xkb_layout" "us"
[ 1767.500] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event14)
[ 1767.500] (II) No input driver specified, ignoring this device.
[ 1767.500] (II) This device may have been added with another device file.
[ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event13)
[ 1767.500] (II) No input driver specified, ignoring this device.
[ 1767.500] (II) This device may have been added with another device file.
[ 1767.500] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event12)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.501] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event11)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.501] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event8)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.501] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
[ 1767.501] (II) No input driver specified, ignoring this device.
[ 1767.501] (II) This device may have been added with another device file.
[ 1767.502] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
[ 1767.502] (II) No input driver specified, ignoring this device.
[ 1767.502] (II) This device may have been added with another device file.
[ 1767.502] (II) config/udev: Adding input device DELL Dell USB Entry Keyboard (/dev/input/event4)
[ 1767.502] (**) DELL Dell USB Entry Keyboard: Applying InputClass "evdev keyboard catchall"
[ 1767.502] (II) Using input driver 'evdev' for 'DELL Dell USB Entry Keyboard'
[ 1767.502] (**) DELL Dell USB Entry Keyboard: always reports core events
[ 1767.502] (**) evdev: DELL Dell USB Entry Keyboard: Device: "/dev/input/event4"
[ 1767.502] (--) evdev: DELL Dell USB Entry Keyboard: Vendor 0x413c Product 0x2107
[ 1767.502] (--) evdev: DELL Dell USB Entry Keyboard: Found keys
[ 1767.502] (II) evdev: DELL Dell USB Entry Keyboard: Configuring as keyboard
[ 1767.502] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.5/4-1.5:1.0/input/input5/event4"
[ 1767.502] (II) XINPUT: Adding extended input device "DELL Dell USB Entry Keyboard" (type: KEYBOARD, id 8)
[ 1767.502] (**) Option "xkb_rules" "evdev"
[ 1767.502] (**) Option "xkb_model" "pc104"
[ 1767.502] (**) Option "xkb_layout" "us"
[ 1767.502] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
[ 1767.502] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 1767.502] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 1767.502] (**) Logitech USB Optical Mouse: always reports core events
[ 1767.502] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event5"
[ 1767.502] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
[ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 1767.502] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 1767.502] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 1767.502] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 1767.503] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 1767.503] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1767.503] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input6/event5"
[ 1767.503] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 9)
[ 1767.503] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 1767.503] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 1767.503] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 1767.503] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 1767.503] (II) No input driver specified, ignoring this device.
[ 1767.503] (II) This device may have been added with another device file.
[ 1767.503] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 1767.503] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[ 1767.503] (II) No input driver specified, ignoring this device.
[ 1767.503] (II) This device may have been added with another device file.
[ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
[ 1767.504] (II) No input driver specified, ignoring this device.
[ 1767.504] (II) This device may have been added with another device file.
[ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
[ 1767.504] (II) No input driver specified, ignoring this device.
[ 1767.504] (II) This device may have been added with another device file.
[ 1767.504] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
[ 1767.504] (II) No input driver specified, ignoring this device.
[ 1767.504] (II) This device may have been added with another device file.
[ 1767.504] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1767.504] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1767.504] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1767.504] (**) AT Translated Set 2 keyboard: always reports core events
[ 1767.504] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1767.504] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 1767.504] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 1767.504] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 1767.504] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1767.504] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 1767.504] (**) Option "xkb_rules" "evdev"
[ 1767.504] (**) Option "xkb_model" "pc104"
[ 1767.504] (**) Option "xkb_layout" "us"
[ 1767.505] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event19)
[ 1767.505] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 1767.505] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 1767.505] (**) PS/2 Generic Mouse: always reports core events
[ 1767.505] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event19"
[ 1767.505] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[ 1767.505] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[ 1767.505] (--) evdev: PS/2 Generic Mouse: Found relative axes
[ 1767.505] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[ 1767.505] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[ 1767.505] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 1767.505] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1767.505] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input7/event19"
[ 1767.505] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 11)
[ 1767.505] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[ 1767.505] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 1767.505] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 1767.505] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[ 1767.505] (II) No input driver specified, ignoring this device.
[ 1767.505] (II) This device may have been added with another device file.
[ 1767.505] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 1767.505] (II) No input driver specified, ignoring this device.
[ 1767.505] (II) This device may have been added with another device file.
[ 1774.230] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1774.230] (II) NOUVEAU(0): NVLeaveVT is called.
[ 1774.230] (II) NOUVEAU(G0): NVLeaveVT is called.
[ 1779.499] (II) evdev: PS/2 Generic Mouse: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) evdev: AT Translated Set 2 keyboard: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) evdev: Logitech USB Optical Mouse: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) evdev: DELL Dell USB Entry Keyboard: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) evdev: Power Button: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) evdev: Power Button: Close
[ 1779.499] (II) UnloadModule: "evdev"
[ 1779.499] (II) NOUVEAU(G0): NVLeaveVT is called.
[ 1780.500] Error dropping master: -22(Invalid argument)
[ 1780.501] (II) NOUVEAU(G0): Closed GPU channel 0
[ 1780.503] (II) NOUVEAU(0): Closed GPU channel 0
[ 1780.503] (EE) Server terminated successfully (0). Closing log file.
Thanks for any help!I have a similar issue except with two ATI cards and four monitors.
I have a working xorg.conf that uses Xinerama and all 4 work but have been trying to get xrandr to work since xinerama is deprecated supposedly.
I would like to switch to xrandr but there is some kind of magic voodoo I have with my current xorg.conf that doesn't even work on an exact same machine and cards that I tried to setup for a co-worker.
lspci:
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT]
04:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV610 [Radeon HD 2400 PRO/XT]
My xorg.conf:
Section "Device"
Identifier "ATI0"
Driver "radeon"
BusID "PCI:1:0:0"
Option "ZaphodHeads" "DVI-0"
Screen 0
EndSection
Section "Device"
Identifier "ATI1"
Driver "radeon"
BusID "PCI:1:0:0"
Option "ZaphodHeads" "DVI-1"
Screen 1
EndSection
Section "Device"
Identifier "ATI2"
Driver "radeon"
BusID "PCI:4:0:0"
Option "ZaphodHeads" "DVI-2"
Screen 0
EndSection
Section "Device"
Identifier "ATI3"
Driver "radeon"
BusID "PCI:4:0:0"
Option "ZaphodHeads" "DVI-3"
Screen 1
EndSection
Section "Monitor"
Identifier "DVI-0"
Option "Primary" "On"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
EndSection
Section "Monitor"
Identifier "DVI-1"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
EndSection
Section "Monitor"
Identifier "DVI-2"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
EndSection
Section "Monitor"
Identifier "DVI-3"
Option "DPMS" "true"
Option "PreferredMode" "1920x1080"
Option "TargetRefresh" "60"
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI0"
Monitor "DVI-0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "ATI1"
Monitor "DVI-1"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen2"
Device "ATI2"
Monitor "DVI-2"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Section "Screen"
Identifier "Screen3"
Device "ATI3"
Monitor "DVI-3"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1920x1080"
EndSubSection
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Screen0" 0 0
Screen "Screen1" RightOf "Screen0"
Screen "Screen2" Above "Screen1"
Screen "Screen3" Above "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "1"
EndSection
My Xorg.0.log shows all the DVI connections when I don't use a xorg.conf file but only two are "connected"
I see DVI-0 and DVI-1 connected and in "xrandr -q" but in Xorg.0.log I see DVI-1-2 and DVI-1-3.
xrandr --listproviders show the two cards as well.
Tried "xrandr --setprovideroutputsource 1 0" and they show up in KDE but as clones and then X crashes eventually.
"xrandr --setprovideroutputsource 0 1" just plain crashes X -
Often lose wireless connection when using HDTV as monitor
I have an unusual wireless networking problem when using my Samsung HDTV in my living room as a monitor for my MacBook (when watching Internet TV shows, for example). Frequently when I switch URLs, networking freezes, even though the connection appears strong, with the Airport symbol at the top of my screen showing all bars. To re-establish the wireless connection, I have to go through the process of re-joining my network through the “Join Other Network" option. The signal holds as long as I don’t try to change it, as in selecting another URL.
I connect to my HDTV via HDMI cable, using a mini-DVI to HDMI adapter from my Macbook’s video-out port. The audio connection is a mini-plug from the Mac’s headphone out jack to stereo RCA plugs associated with the TV’s HDMI port.
The wireless connection is through a Lynksys Wireless-G 2.4 Ghz, 54 Mpbs Broadband router.
I’d appreciate any solutions the Apple user community has to offer.I'd say this has nothing to do with your display. The problem will likely lie in either your router settings, network settings or a simple signal strength issue. Try first changing the broadcast channel on your router, and make sure all settings are correct for your desired network.
-
I have an insignia TV, an apple TV I just bought less than a month ago, and a Macbook Air (mountain Lion) and a MacBook pro (mountain lion).
I am able to connectboth of my computers with the TV to mirror my screen/monitor, but I have not been able to figure out how to use the apple TV to use my TV as a second monitor, like I was able to do with my HDMI cable.
when I bought the Apple TV the person who I talked to at the store told me I would be able to do it, but I havent been able to do it through system preferences and the options for display only show as mirroring through Airplay. I dislike mirroring because while I play something on my computer (or somebody else does) I'd like to still be able to use my computer for browsing or doing homework.
Please help me find a way in which I can make my TV as a second monitor tu my computer without having to have an HDMI cord across the room. I have a puppy and I have had problems with that. That is actually the reason why I considered buying the Apple TV device.
NOTE: In case you know a way to connect my TV to my Macs I have a time capsule and my TV has a DVI, two HDMI, and a USB ports.
thank you!
LydiaMorning jotref,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
About AirPlay Mirroring in OS X Mountain Lion
http://support.apple.com/kb/ht5404
Best of luck,
Mario -
How to connect my Cinema Display as a second monitor
I just purchased a new 27-inch iMac, and I explained to the Apple folks that I had a 17-inch cinema display (silver clad model) that I wanted to connect, for a dual monitor set up. They told me just to get the Mini DisplayPort to DVI Adapter, but I was surprised to realize that's not going to work.
Can anyone tell me how to do this, and what connector is actually needed? I have the big old white power brick that I bought to daisy chain my old 17 and 23 inch displays with my old configuration (Mac Pro).
Or can you not have a second monitor with an iMac?
Thanks in advance.Hi Cathy,
What connector is on that Cinema? ADC, VGA, or DVI?
Video Card:
GeForce GTX 675MX
VRAM Type:
GDDR5
Details:
This model has a NVIDIA GeForce GTX 675MX graphics processor with 1 GB of dedicated GDDR5 memory. At the time of purchase, it can be custom configured with a NVIDIA GeForce GTX 680MX with 2 GB of dedicated GDDR5 memory for an extra US$150.
Standard VRAM:
1 GB
Maximum VRAM:
1 GB*
Built-in Display:
27" 16:9 Widescreen
Native Resolution:
2560x1440
Details:
This model has a 27" LED-backlit 16:9 widescreen TFT active matrix display with IPS technology and a native resolution of 2560x1440. Apple also reports that the "cover glass is fully laminated to the LCD and an anti-reflective coating is applied." Previous Aluminum iMac models have the LCD covered by glass. The company no longer reports viewing angle or contrast ratio, however. Site sponsor Mission Repair offers free diagnosis of iMac hardware problems and a 24-hour repair service for this iMac. Display replacement, keyboard replacement, a hard drive upgrade service, and more are provided.
2nd Display Support:
Dual/Mirroring*
2nd Max. Resolution:
2560x1600 (x2)
Details:
*This model can simultaneously support two external displays up to 2560x1600 via Thunderbolt.
http://www.everymac.com/systems/apple/imac/specs/imac-core-i7-3.4-27-inch-alumin um-late-2012-specs.html -
I have a MBPro mid 2013 with 1 Thunderbolt port. Just bought a Mac monitor and want to daisy chain a PC monitor to it. Use a Mini DVI to VGA adapter from MBP to PC monitor. How do I daisy chain the 2 monitors?
Hall Palm Desert,
if your Mac monitor has Thunderbolt ports, and the PC monitor is on the end of the daisy chain, then you might be able to do it by connecting your PC monitor’s VGA cable to a Mini DisplayPort-to-VGA adapter (e.g. Apple, NewerTech), connecting that cable’s Mini DisplayPort end to one of the Mac monitor’s Thunderbolt ports, and then connecting a Thunderbolt cable between the other port on the Mac monitor and your MacBook Pro.
Maybe you are looking for
-
Why do 3 instances of Firefox open at the same time?
Every time I start up Firefox, 3 different instances of Firefox will open at the same time. Do I need to uninstall it and start over? I don't know why this is happening. When I open IE8 only one page opens; but when I open Firefox 3 tabs open at the
-
Sales Order Creation for Contracts
Hi, When I execute FM 'CRMXIF_ORDER_SAVE', it is going to dump with error "Inconsistency between Dictionary types "CRMXIF_BUSTRANS_ITEM_T". " if someone could help me sorting this out that would be great. I would also like to know if there is any oth
-
Why do you want all our info when will you put a box for what coulore pants i am wearing
why do you want all our info when will you put a box for what coulore pants i am wearing The only reason I can see you want this info for each install of office 365/2013 is so you know what every person in the world is upto sort it out microsoft
-
How do I display Album art on iPod 20GB color?
In iTunes I set the album art for each song, but I can't seem to find out how to display it in the iPod itself. Please help. Thanks
-
I am trying to buy some coins on Haypi game. it tells me that the purchase could not be completed contact itunes store support to complete this transaction. how can I do this?