HP 2170 All in one printer not powering up.

Hi
I have a HP2170 series printer that will not power up when the on/off button is pushed. Is there anyway to reset this printer and/or is it susceptable to mains glitches?
Regards
Bernad

Unplug the power cord from the wall and the printer for 5 minutes. Plug back in and turn on.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

All in one printer not printing on windows 8.1

Hi my HP deskjet 3520 all in one printer used to work then i upgraded to windows 8.1...now it won't print...it shows as a printer in the devices window but does not show up when you ask to print...or sometimes it does but then a pop up window says there is no printer....i have reloaded the software a number of times and it all says it is connected to the wireless network....help please

Give this tool a try, it might help the printing - http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c03286146

HP Photosmart C7280 All In One printer not campatible with windows 8.1

I have an old Photosmart c7280 all in one printer. I bought a new computer that has windows 8.1. HP doesn't
have software or drivers that can make this printer compatible with my new computer. What can I do besides buy a new prfnter?

Hi,
Please download the following Software and Derivers and install on your new Windows 8.1 machine:
http://ftp.hp.com/pub/softlib/software12/COL30662/mp-110038-1/PS_AIO_02_Net_Full_Win_WW_140_408.exe
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

HP PSC 1410 All in one Printer not installed

In windows 8 after complete and lastest installation of Driver of HP PSC 1410v All in one, in the Control Pannel, Device and Printer Tab only scanner icon is showing no any printer icon and no other HP Icon, so i can use scanner only of this model but not printer. After reading suggestions I install the windows 7 driver in windows 8 after solution of fatel error here is also only scanner is showing no facility for printing, please help me where I am wrong or whats solution fast plzzzzzz.

Hello Jai_pareek,
Welcome to the HP Support Forums! I see you would like to install your HP PSC 1410 to your computer running the Windows 8 Operating system. You tried downloading the Windows 7 driver but are now getting a fatal error. Please go ahead and start with the steps listed below:
1. Unplug the USB if using a direct connection.
2. Remove the HP PSC 1410 software from your computers Control Panel's Uninstall a program option.
3. Restart the computer.
4. Make sure ALL the PSC 1410 software is gone from the programs list as well as your HP folder listed under the All programs in your Start Menu.
5. Now go ahead and download the software and drivers for your PSC 1410 (DO NOT plug in USB until the software prompts you to):
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=al-110055-2&cc=us&dlc=en&lc=en...
6. Go ahead and print a test page.
7. If you are unable to print a test page, please run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
Please let me know if this was successful! I will watch for your reply.
Thank you,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP 6500 officeject all in one printer not printing black ink

HI there, every time I install a new cartridge, I go through all of these steps and end up purchasing another set of ink because I exhausted all of the ink by cleaning the cartridges. I don't understand and wish that I would receive a refund for all of the ink I have purchased with no resolve. At 68.00 a pop, back to back, I am a little frustrated. I still have the same problem of black ink not printing. HELP! I have done everything to trouble shoot the problem!

Hi @sunnybaby
I appreciate the troubleshooting you have done thus far, and completely understand your frustration. There is something else I would suggest trying, if you have not done so already.
My own personal recommendation, not one of HPs, is to use the solution offered in the following video. I only suggest doing this if he printer and printhead are out of warranty.  Hot Water Printhead Flush - HP Ink Series Printers with removable Printhead.
I have recommended this solution to others and have seen success, but I can not guarantee this will resolve the issue, it is an end of the line kind of effort. I hope it helps.
PaganC wrote:
    flushing it worked, Yeah!!!!!!! thanks for your help.
Although the printer might be out of warranty, if the issue persists, HP may be able to offer you something. Maybe they can offer you a discount on a newer model, or discuss the option of replacing the printhead!  If after all of our efforts the issue remains, I suggest calling HP. If you are in Canada or US call 800 474 6836, or you can Contact HP Worldwide.
Thanks for reaching out to the HP Forums. I hope one of my recommendations resolves the issue.
- In support of Movember
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

HP PSC all-in-one printer not working

I reinstalled the driver cd disc, rebooted, corrected the printer default connection. I've unplugged everything. Printer doesn't work. It just stopped, but then sometimes it will print. Never jammed. I use power surge protectors high quality. All network connections working. I can hear the printing but nothing prints. Printer will print self-test but that's it. I noticed that the model number for the printer may not be correct in properties but can't figure out what the model is and how to correct the entry. Hmmm -- any ideas please?

According to http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=3 74575&sw_lang=&os=219&#N701 there's no software, but only a driver that supports SL printing, but not scanning.

HP 5510xi All-In-One Printer Not Feeding Paper

I was printing a document and the paper got jammed. I removed the back panel to release the jam, but now the paper does not feed through. When I try to print something the printer acts as though it will print but it makes a sound just like when there is no paper in the tray and then a "Out of Paper" shows up on the screen.
I have tried unplugging it and re-plugging it to get it started again. But that didn't work. I cleaned the rollers and that didn't work either. I went through several things listed on the troubleshooting screen, but it still doesn't work.
If anyone can help me, please do! I have several cartridges that I have not opened and would go to waste if I cannot fix this printer.
Thanks

Unplug the power cord from the wall and the printer for 5 minutes. Plug back in and turn on.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Hp psc 1200 all in one printer not working

I reformatted my disk after downloading Yosemite, as some programs were very slow to respond.
My colors in laptop MacBookPro were washed off!
Now after downloading new Yosemite software, my printer is not getting recognised!
Drivers from HP site don't work too.
Any good advice is required.
Thanks

According to http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=3 74575&sw_lang=&os=219&#N701 there's no software, but only a driver that supports SL printing, but not scanning.

Deskjet 3520 e-all in one printer not printing black ink

I just installed a new hp 564xl black ink cartridge with an expiration date of 01/30/2017. Low and behold the black is not printing and the printer was purchased in 08/2012. I did everything that was suggested in the support forums and to no avail did anything work. The three other colors print out fine except the black. Based upon everyone's answers I guess there is no repair for it and I should scrap this unit after three years of constant use. I would think by now there would of been a solution posted to this problem but Hp has failed us. I've been using HP printer products since I purchased my first computer in 1992 and never had a problem with them until now. My second printer which was purchased in 2004 is still going strong, except that it is not wireless. If I need to purchase a new wireless printer, I'm sorry to say that I might have to look at the competition. If anyone knows of a solution I would appreciate it.

The post here has links to a troubleshooting document for the Deskjet 3520. If the steps there do not resolve the issue please contact HP Support, even if the printer is no longer under warranty. If the above does not give satisfactory results then please post back here and mention the country you are in.

Driver question - my all in one printer will print but not scan

Hi
I have an HP c4280 (you know, the all in one printer you could get for free with the mail in rebate in 2007). I just plug it in and my mac recognizes it as a printer, and it prints fine, but image capture does not recognize it as a scanner. Before I upgraded to leopard I had all of HP's stupid software installed but after upgrading to leopard it didn't work (surprise). A lot of other things didn't work either so I did an erase and install and now everything works beautifully (I feel like I have old Tiger back, but better). However, I do not want to install HP's stupid overbloated and highly unnecessary mountain of software on my nice new clean system (I have turned into kind of an apple-only purist I guess ^_^). I checked HP's website and all they have is the same ginormous software bundle for download, and the installation wizard does not allow the option to install only components of the software (its all 28 programs or nothing). So, my question is, does anybody know where I can find only the driver I need (or WHAT driver I need) to make this printer compatible with image capture so I can scan?

You need to download the full featured driver from the HP site, and it also seems HP has an update for the Leopard installation as well.
http://h10025.www1.hp.com/ewfrf/wc/softwareList?os=219&lc=en&cc=us&dlc=en&produc t=3192753&lang=en
I too have a C4280 and wasn't able to use my scanner until I had fully installed the HP software.

With my hp office 5010 all in one printer, i'm not able to scan, and this is one of his duties. why

with my hp office 5010 all in one printer, i'm not able to scan, and this is one of his duties. why isn't it possible?? Bad ssoftware while downloading it from internet because I lost CD rom. No pilot available for scanning with it??? Bad version of soft??? I bauught this printer because of his utility and space occupped: able to print, copy and scan in same machine, gain of room, perfect, but my scanning function is not working!!!! I would like to solve this damned problem which upset me since several weeks.... Waiting for an answer and a solution, best regards

pmonteil31 wrote:
Waiting for an answer and a solution, best regards
Hi,
Sorry you have to wait longer because I can not find your printer model under Google. Must be very old ?
Regards,
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

IMac will not recognize scan function of all in one printer

My 24" iMac will print on the HP Photosmart 3210xi All in One, but will not scan.
Twice, (to ensure I didn't miss anything) I have run the manual un-install procedures prescribed from HP, and installed the appropriate driver for Mac with no success.
When I try to scan, the scanner wants to begin, but the computer displays the message, "Sorry, scanner could not be initialized. (Scanner not found.)" We have the correct driver (Not the Print only option).
This printer still works "full-up" on the clunker PC, so it's not a hardware issue with the printer.
Any others with similar all-in-one issues? Solutions?

I had the same problem with my HP Photosmart 2610xi All In One Printer. I went to the HP website and downloaded the full feature software/drivers and now it works great. Below is the software that you should download for your printer...hope it works for you!
HP Photosmart Full Feature Software/Drivers - Mac OS X v10.3 and v10.4 (Universal)
08-2007 9.5 170.57M

HP Deskjet F2120 all in one printer driver not installing after upgrading to Windows 7

I have a HP Deskjet F2120 all in one printer. I was working fine in Windows Vista Home Premium 32 bit.
Once I upgraded to Windows 7 Home Premium 32 bit the driver is failing to install.
I have tried all the solutions provided on the HP website but none of them worked.
I also wrote a mail to HP support but they replied that its out of warranty hence they will not be able to help.
If some genius can help me I will pray for him/her that all his/her wishes come true.
Thanks you in advance.
Imroz Baig

I just got my HP Deskjet F2120 working in Windows 7. Here's how:
Insert the setup disk in your CD/DVD drive. Choose to view the files in Explorer. Scroll down to the file "Setup," which is identified as an application.
Right-click the file and select "Properties." Click the "Compatibility" tab at the top of the resulting window.
Check off "Run this program in compatability mode for:" and choose "Windows Vista" from the pop-up menu.
ALSO check "Run this program as administrator" at the bottom of the window.
Press "Apply," then "OK."
Now you can double-click the "Setup" file and run the software installer.
It will 100% work inshallah...

My HP Officejet 4315 All-in-One does not print

My HP Officejet 4315 All-In-One printer does not print althoug it is connected to my laptop and working properly
The dial shows the word FAX instead of PRINT. How can I remove the word FAX? because I think this is the prolem
Any one with info pls email me at:[edited email by moderator] Thanks, pedrodomenech

Hello @pedrodomenech , and welcome to the HP Forums, I hope you enjoy your experience!
I can see you're running into fax/print issues.
I would love to help with that, but I need a little information to try and help you first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Please let me know what you find. Thanks for posting on the HP Forums!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Purchased an HP Photosmart 5520 all in one printer last year and a Macbook Pro in Jan. They worked together up to June. In Sept. when I tried to print wirelessly, it would not print. The laptop had been updated. Tried to update the printer via HP,couldn't

I have an HP Photosmart 5520 all in one printer and a MacBook Pro. Bought the MacBook Pro in Jan 2013 and the printer in Dec 2012. I was able to print to the wireless printer up until June 2013. In September, when I tried to use them together, I could not print. During the period between June and Sept., my laptop software was updated. I have tried to update the HP software on my laptop, but could not. What can I do to use this printer with my MacBook Pro? Please help!

The MacBook Pro is running at least 10.7.

HP 2170 All in one printer not powering up.

Similar Messages

Maybe you are looking for