Hp 2200 de printer on WIn 7 system

Yes, this printer is older, but still works well. However, I now have a new Win7 machine and can't find a decent driver to work with 4 bit Win7. There is a PCL 5 driver that sort of works (with USB printer hookup) but it won't do duplex printing. ALso, our XP laptop doesn't like any driver to print back through the Win7 machine. I tried using the drivers from the old XP machine (a PS driver that worked fine for duplex) but it won't work on the 64 bit Win7 machine. I have tried all the drivers that I can find on the HP site and the only one that seems to work at all is the PCL5 non-duplex one. Does anyone have any ideas or am I just out of luck with this printer and new Win7 machine? THANK YOU for any ideas you may have to help!

Hi there,
I can't seem to locate the printer you mentioned. Try using this link to locate your printer and posting back with your printer model.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

Cannot duplex print on Win 7. Duplex Unit "Install" not available

Printer Photosmart C6280. System Win 7 64bits Ultimate
The duplex printing was working fine on Windows XP. Bought a new computer, Win 7 and installed drivers and softwares from HP web site.
So far, I can only do manual duplexing. I tried following the instruction:
Step one: Add the Duplex Unit to your printer settings
On the Windows taskbar, Click the Windows icon ( ), and then click Devices and printers .
Right-click the printer icon ( ) for your product, click Printer Properties , and then click the product. The Printer Properties window opens.
Click the Device Settings tab.
If necessary, click the plus sign (+ ) next to Installable Options to expand the list.
Click Duplex Unit , and then click Installed .
Click Apply , and then click OK .
But the dropbox at item 5 "Duplex Unit" is disabled (grayed out). So what do I do from there?
Regards.
This question was solved.
View Solution.

This makes sense. However, I am the only user on this computer and my status is administrator. Anyways, I tried all combination of ctrl-right-click, shift-right-click, ctrl-shift-right-click in trying to get a "run as administrator" but none works. Any other ways to run the printer properties as administrator?

Unable to print from my Mac system, but my other computers work

Have you encountered a problem printing from your Mac computer and it seems to work from everything else?
I have looked at several posts regarding to printing from a Mac. PrintDoc seems has a solution that can resolve most of the printing issues from Mac when other devices work.
1. Reset the printing system by clicking on Mac OS X: How to reset the printing system and following the steps exactly. This will reset just the printing system back to a fresh start. This works for 10.5 to 10.7.
2. Download and install the driver package Apple has here. This driver package will work for most HP printers. There is a link at the bottom of the driver page to verify that your printer is included. If it is not, check HP's support and drivers page at www.hp.com to download the right driver package for your printer.
This will resolve printing issues on Mac systems when the problem is isolated to the Mac.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓
This question was solved.
View Solution.

I just wanted to share this information as this seems to be an issue that arises and has an easy fix.
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

HP Officejet J4550 All-in-one printer Unable to print pages/photos from system request !

I have an HP Officejet J4550 All-in-one printer that I had set p when I bought my new Acer system with Windows 7 installed and had no problem from the beginning to set-up the installation and have it running as My Default printer and has worked fine up until now ; when all of a sudden the system ;when I go to print a page/photo brings up the set-up - shows the printer as Default and then when I run PRINT...there is No page/photo printed out ? I have tried to run the Diagonistic software and shows the printer as Default and No problems and yet still delivers No Print out ? My system has had All up-dates automatically installed up till this point ...So I not being a Techie ,do not know what or where to look for help to resolve the issue next ? Anyone able to tell me what to look for to do or how to resolve the issue or do I need to just Un-install the printer and Re-set it up again ?? I have tried to look at all places on HP ;but it does not even show my older HP Officejet -J4550 - All-in One Printer ? Just keeps referring to HP Officejet -4550 ? Loooking for any answers ! Thank Yopu ,JS

Hi jspin3,
I'd like to help. For now, I would hold off on the uninstall and reinstall. Can you answer some questions?
Is the printer connected by USB, Ethernet or wireless?
Do you get any error messages?
Does a blank page come out or do no pages come out when you try to print from the computer?
If you put a document face down on the scanner glass, are you able to make a photocopy?
Can you estimate the ink levels, in percent full for each cartridge, by looking at the printer ink gauge? Click Here
If you print a Self Test Report, do all of the colors print?
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input ! ___________________________________ _____
Thank You,
Rich
Expert

My iMac with Mavericks update does not recognize my brother printer and I cannot even add the printer info in the system preferences printer list. What is WRONG?

I had to buy a new printer when I got my Imac and I chose the Brother multifunction inkjet MFCJ470DW. It worked fine when my Mavericks version was 10.9.1, but after the automatic update to 10.9.2 the computer no longer recognizes the brother, or says it isn't connected, and when I deleted it from printer preferences and attempted to re-enter it as default printer, I cannot even type anything into the list of printers when I press the + sign to add. What am I doing wrong? Can someone please tell me even how to add text into the printer preferences list?

I had some of the same issues your having, deleted the printer from Printer and Scanner in System Preference.
What I ended up doing was connecting the printer with a USB cable like it was a new set up, down loaded the drivers from Apple, still did not seem to work, but did a coupel of restarts and the printer was found then I completed the set up.

How to print Barcode in development system as well as in Sandbox?

Hi All,
We want to print barcodes in development system.
However, barcodes EAN13 and EAN 8 are displayed in Sandbox but not development system.
Are there any specific settings to be maintained?
Thanks,
AP

Hello, you didnt provide enough information to catch on. To ease printing of barcodes I can recommend moving to Adobe forms.

Please help, running oracle 8i on win 2k system

Hello,
I have been trying all day to get oracle working on my system. I am not networked as I am using it only on my win 2k system. everything installed fine, but some of the programs arent even working...i dont understand why it installed successfully if programs arent starting up. (net8 easy config, etc)
also, i am trying to start up SQL Plus and it is asking me for a user/pass/host string. i tried scott/tiger and nothing happened i get an error ORA12560: INS:protocol adapter error
I have used SQL Plus on an installed system before, but this is the first time i am starting everything from scratch.
Any help would be appreciated. Thank you.

check it please whether it is a database version or just you are installing a client. Install Enterprize database on 2k system. I you are running a client software then you are to deinstall it.

Firmware version 8.00.2 for WRT54G on a Win 98SE system

I tried to download the 8.00.2 firmware for the WRT54G on my Win 98SE computer, which is hardwired into the router. I had the laptops with Win XE or with Mac op sys shut down so they would not access the router. I downloaded a file with the extension *.bin. Neither WinZip mor PKZip could expand that file. When I double-clicked the file, I got asked what program to use to open the file. Please advise on how to use the downloaded file on a Win 98SE system.
Also, when I tried to download the users manual and the info sheet for this router, I got a blank screen. I'd love to see these.
Thanks for any help.

To upgrade a routers firmware, open up Internet Explorer 1st, then on the address bar, type the numbers 192.168.1.1 (username just leave it blank, password as a default is admin). Then go to the Administration tab, go to firmware upgrade, browse, and select the file that you downloaded (the one w/ the .bin extension).

CS2 Premium serial number not accepted at use on Win 7 system

I have at several years old version of the Creative Suite 2 Premium. It has been licensed on a Win XP system previously, but now I try to install it on my new Win 7 computer.
But the "Personalize your software" - window will not accept the serial number that I can read on the product casette from the label named "SERIAL NUMBER CREATIVE SUITE PREM".
Am pretty sure that it is entered correctly, and in fact the same serial number is accepted during installatin.
Please advise....
Ole C P

Hi Jeff,
The request for the serial number comes when I start up InDesign, I have not tried the other programs.
I enclose a screendump of the Serial number request and while I am at it a foto of the product case as well:
<Images removed by Moderator>
regards
Ole Carsten Pedersen

HP LaserJet 5100 Postscript network printer interface to Embedded system

HP LaserJet 5100 Postscript network printer interface to Embedded system.
I have the HP LaserJet 5100 Postscript Network printer and want to interface it to Embedded system designed by using the ARM Cortex microcontroller and TCP/IP stack is also ported.
Using the Windows XP, i am able to print test.ps file on the HP LaserJet 5100 PostScript Network Printer.
( copy test.ps \\print_server\Print_port )
i need the documents which will help me for same.
please help...

It appears your printer is a commerical LaserJet printer.
You may get a better reponse by posting in the commercial LaserJet forums.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Supress Printer Dialog box (Operating System) in Payslip Printing

Hi All,
I have design the smartform to print the payslip. In the main window i have created the loop and then desing the templates to display the details of employee and the wage types.I have only one page in it. I have develop the print program to call the smartfform. But when i try to print the payslip for number of employees the printer dialog box (Operating system Level) is appearing for the number of times the employees i have selected.I am able to suppress the Print Preview dialog box from SAP it is not showing and i have given the parameters to print immediately.But the Problem i am facing is if i select 3 employees the printer dialog box is coming 3 times. i have to click 3 times to print the payslips .
Mustafa

Hi,
Please find the code below. I have made the changes but agian it is asking for the printer dialog box for the number of times the employees i have selected.
call function 'SSF_FUNCTION_MODULE_NAME'
exporting
   formname                 = 'ZHR_F_MMG_PAYSLIP'
VARIANT                  = ' '
DIRECT_CALL              = ' '
IMPORTING
   FM_NAME                  = V_FM_NAME
EXCEPTIONS
   NO_FORM                  = 1
   NO_FUNCTION_MODULE       = 2
   OTHERS                   = 3.
if sy-subrc <> 0.
WRITE: / 'ERROR 1'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
loop at i_payslip_details.
gv_control-no_dialog = 'X'.
gv_control-no_open   = 'X'.
gv_control-no_close = 'X'.
I_SSFCOMPOP-TDDEST = 'ZMMG_Print'.
I_SSFCOMPOP-TDNEWID = ''.
I_SSFCOMPOP-TDNOPREV = 'X'.
AT FIRST.
    gv_control-no_open = ''.
    endat.
    AT LAST.
      gv_control-no_close = ''.
      ENDAT.
CALL FUNCTION V_FM_NAME
EXPORTING
   CONTROL_PARAMETERS         = gv_control
   OUTPUT_OPTIONS             = I_SSFCOMPOP
TABLES
    I_PAYSLIP_DETAILS          = I_PAYSLIP_DETAILS
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
endloop.

HP2600n suddenly stopped printing in Windows 7 system 64-bit--why? No error mes, no system changes

After two months, HP2600n suddenly stopped printing in Windows 7 system 64-bit--why? No error mes, no system changes.
I tried reinstalling the drivers, changing USB ports and cables, printing from Notepad, and disconnecting the printer.
My computer will not let me uninstall the driver software, and I tried downloading the software upgrade to do that.
Printer works with computer running XP.
I am guessing that I need a driver upgrade.
Which one?
Thanks, whoever!

Which version of the tool box are you using?Mine would not open after installting updates but after installating the latest version its working fine
http://www-307.ibm.com/pc/support/site.wss/MIGR-73783.html
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Printer shows up in System Preferences, Says Ready, but nothing prints

Hi, I migrated successfully last week from a G5 to a MacPro. My printer was working up until yesterday. It is an epson stylus photo 1400, connected by usb. I downloaded a new driver from Epson, but still can't make it work. Have run Tech Tool Pro, reloaded software several times. Printer shows up in system preferences window, and when I go to print it appears to be working, but then disappears from the list and never prints. Have been checking posts, but not finding an answer. Please help if you can. Thanks, S

Not knowing how you mucked things up when you locked yourself out or what you used with BatChnod, resolving things can be an issue. Check See Niel's guide. and ensure you've done things correctly. If resetting things appropriately doesn't do the trick, reinstall Snow Leopard, run Software Update, repair permissions, and restart.

HP 2200 dtn printer not found by one Mac on network

My local network comprises a desktop Mac Pro connected through an ethernet hub to a Time Capsule, and four Macbook Pros connected to the network by Airport wireless. All Macs are running OS 10.8.5. A HP 2200 dtn printer is connected to the network through the ethernet hub. This network has been very reliable. After replacing a faulty JetDirect card on the printer and deleting the printer on all machines, all the Macbooks readily detected the printer and automatically reinstalled it and there is no problem with printing. The Mac Pro is connected to the network by ethernet, but it cannot detect the printer and it does not appear as an option for installation. I have tried installing the printer by entering its static IP address, selecting JetDirect, and selecting the HP 2200 driver from the software list (or the generic PS driver). But in both cases I get a message "unable to verify printer on your network...unable to connect due to an error."
Any suggestions on what to try next?

Hi Good Ole Boy,
I'm sorry to hear that you are having issues with the one Mac Pro and your HP LaserJet 2200 printer.
Your HP Printer is a commercial product. I have included a link to HP Product Support Page for your printer. There is a section that discusses your printer and Mac OS X 10.8.
If the information you are looking for is not there, for more exposure I would suggest posting on the HP Commercial Products forum that can be found at http://h30499.www3.hp.com/hpeb/
HP LaserJet 2200 Printer Series Support
http://h20565.www2.hp.com/portal/site/hpsc/public/psi/home/?sp4ts.oid=28861
I hope this helps.
Happytohelp01
I work on behalf of HP

How to uninstall Flash Player Incubator from a 64-bit Win 7 system?

Hi all,
How can I uninstall flash player incubator from a 64-bit win 7 system?
Regards,
Manos

Check this thread.
Once I have downloaded FP 11.0.1.3 debug, I can't uninstall it to get back the shipping version

Hp 2200 de printer on WIn 7 system

Similar Messages

Maybe you are looking for