Hp 2311x repeatedly goes black

My 2311x monitor (Product no. XP598AA) consistently goes black, then comes back on with a "Monitor Status screen" as if I had just turned it on. The power button stays blue, so it's not going to sleep. This has happened since I first bought it in 2011, but it has become much more frequent and now happens almost constantly.
I have tried all of the following:
- Using a different DVI cable, as well as trying both HDMI and VGA Cables
- Using a different computer with the monitor
- Using a different power supply
- Factory Reset
- Monitor Reset with the power button
This problem still occurs no matter what I've tried, and I own two more of these monitors that work without issue, so I am reasonably confident this is a hardware issue with the monitor itself. Please help!

Hello,
I see that you have made this post sometime ago and you got no reply.
Well, you did a good troubleshooting and theres nothing else you can try...
Like you said, its a hardware issue and therefore there is nothing we can suggest to fix it. Only thing you can do is to exchange the monitor for another one.
Thanks,
I work for HP! Please remember to provide and if this helped click ON

Similar Messages

Just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

just bought a new iphone4 and was loading os6 and now it won't turn on. the apple glows like it is starting up, then the screen goes black and then repeats the same process over and over. i have tried to reboot multiple times now

I am assuming the phone was working prior to you installing IOS 6? Did you use itunes to install IOS 6 or just run from the phone?
When I tried to do the Over The Air update to IOS6 on my iPhone 4, it errored out and I had to connect it to iTunes and select "Restore" from the summary screen after iTunes finds the phone is connected. If this works for you, it will go through a couple of reboots that take a few minutes to complete. It should then give you the option to start with a fresh new phone or to use one of your previous backups to load your contacts and other information, provided you have backed up the phone previously.
I hope this helps you my friend!

Rented film, fully downloaded (eventually) press play now then screen goes to authorizing, then goes black blank, no film , repeated process 3 times, still no joy. first and last time I rent a film with Apple, how do I get my money back ? Thanks

Rented film from Apple TV fully downloaded (eventually) press play now then screen goes to authorizing for 10 mins, then goes black blank, no film , repeated process 3 times, still no joy. first and last time I rent a film with Apple, how do I get my money back ? Thanks

First, that cannot be an iBook G4 as that machine cannot run Snow Leopard let alone Mountain Lion. To run Snow Leopard it has to be an Intel processor, not a G4. What does it show as the Model Identifier in About This Mac, More Info, System Report, Hardware, Model Identifier?
Second, if you have erased the hard drive there should not be remnants of any prior content. Even though Disk Warrior is saying nothing is wrong with the hard drive, it sounds as though there are problems. You may want to consider simply replacing the hard drive so there are no questions about faults. A good source is OWC, http://www.macsales.com where they also have on-line videos showing how to do the replacement.
Third, you could also try again to restart using the Snow Leopard DVD/CD and use Disk Utility on that install disk to erase again, and do it a couple times, then try to install. If it continues to refuse, then it sounds as though there is a fault with the hard drive.

When I charge my ipod, the apple symbol comes up as if it was turning on, then it goes black and repeats the process. Sometimes it gets to where I have to put in my 4 digit code to unlock it then goes black, any suggestions on why it does this?

When I charge my ipod, the apple symbol comes up as if it was turning on, then it goes black and repeats the process. Sometimes it gets to where I have to put in my 4 digit code to unlock it then goes black, any suggestions on why it does this?

Does it work OK otherwise?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Try another cable and USB port and/or charging source
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

When ever i go to watch videos on youtube or any other apps, the screen goes black. you can hear the video but you cant see anything. how do i fix this?

i have an ipod tough 3g and its like about 4 to 5 years old it works perfectly fine except the home button is abit messed up and the ipod sometimes crashes. but other than that everything is fine. so i was watching something on an app and then al of a sudden i dont see the video i can just hear it. i then think its just the app but when i go on youtube the same exact thing happens. you click to watch a video and you can hear it perfectly but you cant see anything. the screen is just black when u ONLY watch a video. this happened last night so yea.i really hope somebody can help me figure out how to fix this and whats wrongwith it:)
thanks for your time and help!
Noor .T.

When it goes black do a very short press of the button on the right upper side of the phone and the screen will reappear. Make it a very short quick press.
OTOH, if you are using the speaker so you can watch the screen as you are talking when it goes dim touch the screen anywhere that it is blank and it will again go bright. On long calls you have to repeat this.
Many folks have had the same problem you described and what I have told you is the best and ONLY way around the screen going blank during a call.
JerryF

Ipad screen is white. Restored it on iTunes. Press home and on switch goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. 16GB OS 7.1.1

The ipad screen is white. Holding buttons didn't work so I restored it on iTunes. When I press home and on switch, the screen is white, goes black then back to white with no logo at all. Can't get past the white screen. This happened after running app updates. Is there any fix besides going to Apple store? In iTunes on computer can see what is on there. 16GB OS 7.1.1

FORCE IPAD INTO RECOVERY MODE
1. Turn off iPad
2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port.
DO NOT RELEASE BUTTON until you see picture of iTunes and plug
5. Release Home button.
ON COMPUTER
6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
7. Select "Restore iPad"...
Note:
1. Data will be lost if you do not have backup
2. You must follow step 1 to step 4 VERY CLOSELY.
3. Repeat the process if necessary.

Mac keeps FREEZING and screen goes BLACK!?!

My computer freezes up and eventually the screen goes black withe the rainbow waiting mouse. So I restart it manually by pressing the button, and turn it back on again. I login, the old programs come back on. I try to click something. The screen freezes andgoes black again with the rainbow waiting mouse.
This happens everytime.
Repeat. Repeat. Repeat.
-I left it off all night and tried it again in the morning. Didn't work.
-I think it started when I plugged my iPhone 4 in the usb.
-itunes wants to update but I can't do it.
-between restarts, I noticed that there was a software update sign, but my computer kept freezing and turning off.

its a MACBOOK PRO

Monitor enlarges display unexpectedly and goes black

I have had my preferences set for a long time, for display to 'sleep' after 5 min. Recently for no reason while I am working with mouse or keyboard, monitor will enlarge the screen image as it goes black.
Sometimes, I can turn the monitor off and then back on to resolve the issue.
Other times, I have to turn the monitor off and on 3-4 times.
If that doesn't work, I have to push the shut down button on the PowerMac,
and then push it right back on.
Recently, I also got a message to set date and time manually as these were prior to current date. Someone has replied to that issue that a failing pram battery could be the cause.
Could the battery be affecting function of the monitor as well?
How can I troubleshoot the problem?

I assume that the display is a CRT-type and not an LCD. From your description of the picture enlarging and then the display going black, I'd suspect a problem with the flyback transformer, which is responsible for producing/regulating the high voltage that drives the screen. Needing to repeatedly power OFF/ON the display to bring the screen back would support this diagnosis. Because of the shock hazard associated with diagnosing/repairing this portion of a CRT display, a trained professional should do it. It would be less expensive to replace it with a flat-screen display, than pay for the repair.

IBook flashing solid colors and goes black. Can anyone please help?

Hi there,
My 14-inch iBook has been flashing solid colors (green, red, blue, three different kinds of white) before going black for about a minute, and then start flashing again. I tried restarting repeatedly, and sometimes the normal screen would appear for about 1 minute before flashing colors again.
Can anyone please help?
iBook G4

Most likely its a problem with your logic board, specifically, the video memory. Apple has admited to this problem for the G3 ibook after a class action lawsuit was filed. My ibook, a g4 933mhz, which was made shortly after the computers that were part of this lawsuit has the problem. I stupidly paid apple $300 to fix the problem, because they told me that as long as the damage was not caused by me, then it could be fixed for $300. After i paid them and they shipped the laptop to their repair center, they called bacl to say that my logic board was damaged because i had spilled something on my keyboard, and that it would cost $700 to fix. I told them to ship it back, and of course they charged me $300 for nothing. I then tested the keyboard and inspected the laptop for this alleged "water damage" and found nothing. Apple offered no recourse to dispute their findings, and said that there were no problems with my laptops logic board that they were responsible for, despite the online petition having been signed over 700 times. They said that i could pay them an additional $70-$80 to have the apple store take my laptop apart and verify the water damage, and that it didnt guarentee anything, it would just make my case for demanding that the laptop be repaired stronger. Also, even though they orginally said that i had spilled something on the keyboard to cause the damage, when i told them that the keyboard was functioning, they said that i must have placed the laptop in water.
Here is the link to the online petition http://www.petitiononline.com/ibookg4/petition.html . Good luck with your laptop, obviously, unless yours is still under warrenty, i dont recommend sending it to apple for repairs. I should also note that they did originally think that my laptop was part of the problem batch when i brought it to the store, but after they checked the serial number and determined that it was not, then mysteriously the damage was caused by me, and they pocketed my $300.

Hp2509m goes black too fast to use any of the fixes

I have read, and tried to use, many of the previous forum answwers regarding an HP monitor screen going black. For example resetting the MENU to FACTORY DEFAULT; correcting OCD display errors; power-cycling; tenacity and patience with repeatedly pressinfg MENU, +/-, and volume et al. My problem: the screen will not stay lit long enough to effectively use/try any of the remedies mentioned! One other forum mentioned he could 'see' the menu using a flashlight up tp the screen even when dark - well mine goes absolutely black!
I hooked up an old monitor to be sure it wasn't a video card and the monitor works great.
It is an HP2509m that has worked great for years until trying to turn it on two days ago! It is attached to my HP Pavilion p6267c that i have had since 2010.
What else can I try? Thanks in advance.

Hi,
Try the monitor and cable on a different PC to see if you have the same issues.
Remove the power and data cables and hold down the power button for 60 seconds. Now give it a go.
You might try Google "HP2509m repair" and see what others have said about repair issues.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

If I stay on iPhoto too long, my screen goes black.

Hi all,
Recently, I was editing a photo in iPhoto when suddenly the screen went black. The computer hadn't switched off because the backlight keyboard was still lit.
After many restarts, I finally realised that if I were to open iPhoto and leave the appellation open for about 20 seconds, the screen would go black again. Eventually iPhoto said that my library could not be found and I had to go through the process of rebuilding my library. I now have all of my photos again, but the problem persists. If I open iPhoto and use it for about 20 seconds, the screen goes black.
Does anyone have any suggestions for this strange problem?
Thank you.

Log into another user account on your Mac and see if the problem persists there when you open iPhoto for a while.
If the problem doesn't repeat itself there then try the following in your account:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete the contents the following folder:
User/Library/Containers/com.apple.iPhoto
3 - reboot, launch iPhoto and try again.
NOTE: For Mavericks, 10.9, go to your Home folder and use the View ➙ Show View Options menu to bring the this window:
where you can check the Show Library Folder checkbox.

Photos in my iPhoto library will not enlarge when double clicked on. they fill the screen and then screen goes black. hasn't happened before. thanks--

photos in my iPhoto library will not enlarge when double clicked on. they fill the screen for a second (or less) and then screen goes black. hasn't happened before. thanks--

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/ Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help: As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

20"iMac Display Suddenly Goes Black

While I am using my iMac, occasionally suddenly goes black. If I hit a key (usually the space bar), it comes back as if I had put it to sleep.
What is happening? What should be done? What can I do?
Thanks for your help and information.

"Answered on another forum"
What a way to be helpful! I went through your posts and searched "display" and I did not find this mysterious answer you talk about.
I'm having the same issues on my Intel Core 2 Duo 20" iMac. if ANYONE could post a solution, I'd appreciate it.
The computer is still working correctly. It is not on sleep mode. I've press the power button and it goes to sleep, but then when I wake it up it repeats the black screen a couple of times until it finally settles on letting me work.
What is the point of user support forum if there are no moderators around to help people out? :/

IPhone 3GS works fine, unless I the screen goes black after no use. Then I'm stuck on the white screen until I reset the phone.

The title kind of sums it up. After having my 3GS for over a year without issue, it started acting up today. I had my phone on my desk at work, and had been checking my e-mail, news, and web intermittently throughout the morning. I set the phone down, in it's typical spot without issue. No dropping, no hits, no...nothing. Just set it on the desk and go about my work.
The next time I pick up the phone to use it, and hit the button, I'm greeted with an all-white screen. WTH? If I press and hold the home button the phone makes a "dunk" soud, like maybe I'm enabling the voice feature. Long story short, I can restart the phone, and reset the phone, and it's fine.
UNTIL the screen goes dark from inactivity. From that point on, it will ONLY come back in the full-white-screen mode UNTIL I reboot it again, in which case it's again functioning normally...UNTIL the screen goes black from inactivity. I can hear the phone make text-alert noises as texts come in, my e-mail continues to download regularly, etc. But it stays stuck in this white screen anytime the battery saver turns the screen black.
Any ideas on this?

So, I've received and installed a replacement digitizer screen / component. The good news is that the digitizer works just fine! Screen swipes, finger tracking, etc are all great.
The bad news...is that it didn't fix my white screen issue. Same symptoms...everything works fine at boot. As long as I keep the screen from going dark, everything continues to work fine (rapidly consuming battery, of course). If, at any time, the screen goes dark (get a call, accidentally press the top button to shut down the screen, etc), the screen will only come back on as a white screen.
All touch components are working fine at this time. I've grown to remember where the "power down" swipe is located, so I press and hold the power down button, then swipe where I know the "power down" swipe is located. Phone will shut down.
Restart the phone, and repeat the process. Anyone have any other ideas?

When i double click a photo in iphoto to edit, the screen goes black

when i double click a photo in iphoto to edit, the screen goes black. I'm using 10.7.5 with iPhoto 9.4.2. Can anyone help?

There are several possible causes for the Black Screen issue
1. Permissions in the Library: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Include the option to check and repair permissions.
2. Minor Database corruption: Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild.
3. A Damaged Photo: Select one of the affected photos in the iPhoto Window and right click on it. From the resulting menu select 'Show File (or 'Show Original File' if that's available). (On iPhoto 11 this option is under the File -> Reveal in Finder.) Will the file open in Preview? If not then the file is damaged. Time to restore from your back up.
4. A corrupted iPhoto Cache: Trash the com.apple.iPhoto folder from HD/Users/Your Name/Library/ Caches...
5. A corrupted preference file: Trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
If none of these help:
As a Test:
Hold down the option (or alt) key key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Hp 2311x repeatedly goes black

Similar Messages

Maybe you are looking for