HP 250 G3 can not connect to modem when it returns from sleep

Hi, Ralink RT3290 Wifi adapter driver is loaded on my HP 250 G3. I can connect modem and internet. I can download and upload data from internet properly. However, if I put my PC on sleep, after waking up, PC cannot connect to modem. At every turn, to solve this problem, I turn off and turn on wireles adapter. Then, PC can connect modem and work properly. How can I solve this problem. Is there any problem on my wifi driver or something else? Please help me.

Thanks. How long is the delay?
I've had that on my Late 2007 MBP since Day One but the delay is usually only seconds--no more that three on a bad day.
I think its to do with waking from sleep. The standard sleep mode in the MBP is :Safe Sleep" where the computer writes the contents of RAM to the hard drove before sleeping as a safety net against the battery running dry while the computer sleeps. If the computer has to read this spot of info before completely awaking.
When I first purchased my MacBook Pro, a month ago, it would connect immediately upon waking from sleep. Now, for some unknown reason, it will not
That could be the result of now having more to write before sleep than when the computer was new because it's been in use a while and had other software added. For a test, see if the delay is reduced if you quit all open apps before sleep.
Having DashBoard active could also be a contibutor becasue many widgets have to "phone phone" for updates and could be preempting the connection opening for regular use. I use this widget:
http://www.apple.com/downloads/dashboard/status/dashquit_berenguierduncan.html
to shut down Dashboard without having to restart the computer. It's a carry-over from the old days of slower computers and expensive RAM but i find it still useful. This does not harm Dashboard or make if unavailable later. It 's basically the "off switch" that DashBoard should have been granted.
If, after quitting active programs and Dashboard, the delay is still more than a few seconds, then something else is at play. As the computer is new and under warranty, I would let an Apple Store look at it.

Similar Messages

I am trying to update my iphone 4 icloud but I keep getting can not connect to server when I click on the terms and conditions

I am trying to update my iphone 4 icloud but I keep getting can not connect to server when I click on the terms and conditions

" iTunes could not contact the iPhone software update server because you are not connected to the internet. Make sure your internet connention is active and try again."

Apple tv can not connect to library when wired to modem instead of wifi

My network consists of a Fios router, which I have shut off the wireless on. That is wired into a Nighthawk wireless router. So, there is only 1 wifi network.
The Fios router is wired directly into 3 Apple TVs. I am unable to airplay onto the AppleTVs nor is AppleTV able to find my Library (it finds the name and then can not connect). I presume the issue relates to the AppleTVs being wired into the modem - and even though that is wired directly into my wireless router, when I am on a wireless device in my house, it can not reach through the wifi router and to the modem, which connects to the AppleTVs. Similarly, the AppleTVs seem unable to reach back through the Fios router, through the wired connection to the wireless router, which is connected via wifi with my computer with iTunes running on it. Other than wiring the AppleTVs directly into the wireless router (instead of the Fios modem). I would have thought that the modem and wireless router would act as a single network if wired together, but that appears not to be the case. Thank you

PROBLEM SOLVED! holy crap i feel dumb.
Connect360 was running in the background on my Mac. I've noticed when I have my Mac streaming to my Apple TV, and when Connect360 is pulling from iTunes as well-they like to fight. I disabled Connect360 and my library popped right up.
Thanks for the help.

I've got ipad 4th generation but I can not connect to iTunes .when press video or music it ask me to g iTunes Store when press that the iTunes come up with white page and blue icon saying can connect to iTunes Store .any help please .thanks

I can not connect to iTunes from ipad

This what Apple's iTunes specific error codes support article says about that particular error.
Errors 3000-3999 (3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the update server (gs.apple.com) on ports 80 or 443.
Update to the latest version of iTunes.
Verify the computer's date and time are accurate.
Check that your security or firewall software is not interfering with ports 80 or 443, or with the server gs.apple.com.
Follow Troubleshooting security software. Often, uninstalling third-party security software will resolve these errors.
An entry in your hosts file may be redirecting requests to gs.apple.com (see "Unable to contact the iOS software update server gs.apple.com" above).
Internet proxy settings can cause this issue. If you are using a proxy, try without using one.
Test restoring while connected to a known-good network.

Can not connect Weblogic App Server 10.3 from Jdeveloper 10.1.3.5

Hi Friends,
I am trying to connect JDeveloper 10.1.3.5 to WebLogic server 10.3.
I am facing some problems.
I used JDeveloper 11g to do the same and it worked.
I found that JDeveloepr 10.1.3.5 does not have any wizard for Weblogic 10.3 connection, all the available wizards are
for server version 10.1.X.
So Please tell me if it is at all possible to do this.
The reason I am trying to do this is because I can not create composite applications, as my project works only with esb projects.
As I am new to Oracle SOA suite, I accidentally downloaded JDeveloper 11g and SOA Suite 11g etc.
But I found that JDEveloper 11g can not create any ESB projects, it can only create composite projects.
So I downloaded JDeveloper 10.1.3.5. So please help me configure this IDE with the Weblogic server I have.
If it is not possible, please suggest which App Server and OSB version I need to install.
Many thanks in advance.
Edited by: user10935249 on Aug 27, 2011 5:11 AM

@sweetfa:
Thanks a lot for your reply.
Although, I have to work only with 10g, but this info is helpful in that I will not try doing something that is not possible anyway.
And Mediator revealing the ESB project after migration was a completely new info to me and a pretty helpful one.
Edited by: user10935249 on Sep 1, 2011 4:03 AM

Can not connect to itunes when trying to purchase from app

Hello,
Everything was working fine, then i tryed to purchase gold for GoW game on my iphone and iPad but it say erroe connect connect to itunes. i have had it working for days and now for some unknown reason i can not purchase from this any more.
I attempet to buy a song to see if would work and i could buy a song but can not purhase from the game.
Anyone kow of any solutins, tried to contact apple support but have not heard back from them.
Thank you

Make sure the iTunes app is closed (Double-tap the home button and then swipe up on the app preview window above the icon) and then go Settings >iTunes & App Store and then press on your Apple ID...logout.
Reset your device by holding down the home button and lock button (top of phone) for 10-12 seconds until the Apple logo appears.
Once the phone comes back on, go back to the same location and log back in to the iTunes store. Now, try the app again.

Can not connect to web, itune or apps from my ipad

I just updated my ipad and now I can not get on the web, into itunes or apps. What did I do wrong?

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

MBA not connecting to network drives after waking from sleep

I have been having this problem over the past few days. When my lat 2010 MBA wakes from sleep it will not connect to my NAS. If I try to force it too connect finder will crash and I get the cannot find finder.app error -10801. The only way I have been able to get the MBA working is a hard reset. Then all is well until I close the lid and wake it up at some point.
I was thinking about re-loading SL, but thought I would check here for any thoughts on this problem.
Thanks
Jim

Hi Carl,
This will fix many problems AND clean up a lot of useless stuff.
Get Applejack...
http://www.versiontracker.com/dyn/moreinfo/macosx/19596
After installing, boot holding down CMD+s, then when the prompt shows, type in...
applejack AUTO
Then let it do all 5 of it's things.
One other "Wake" problem... ignore the HW and other symptims because it works in many other situations...
http://docs.info.apple.com/article.html?artnum=304482

Macbook pro tries to connect bluetooth keyboard when waking up from sleep

I have a 2012 Macbook pro and it is trying to connect to a bluetooth keyboard when I wake it up from sleep. The computer freezes while it is searching for the keyboard and only works properly once it discovers there is no keyboard connected. I have never used a bluetooth keyboard and I currently have my bluetooth switched off.
Doe anyone have any idea how I might stop this from happening? It can often freeze for quite a while, which can be very frustrating.

I have the exact same issue. MacBook Pro Mid 2012. OSX Yosemite 10.10.2. Mine is actually brand new.

HT1338 why do i lose wi-fi internet connection on iMac when computer wakes from sleep

Everytime my imac wakes from sleep I lose internet connection and have to go into network and reconnect. I am using OS X Mountain Lion software. Please help!

You might try looking at these Apple support articles:
http://support.apple.com/kb/PH11099
http://support.apple.com/kb/PH10662 - very simple suggestions only
Here is another thread with a suggestion:
https://discussions.apple.com/message/18848093#18848093
You also might want to consider filing a feedback report. A lot of people are having similiar problems:
http://www.apple.com/feedback/
If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.

I lose internet connection on iMac when it wakes from sleep

Everytime my imac wakes from sleep I lose Wi-Fi connection. I am using OS X Mountain Lion. Please help

You might try looking at these Apple support articles:
http://support.apple.com/kb/PH11099
http://support.apple.com/kb/PH10662 - very simple suggestions only
Here is another thread with a suggestion:
https://discussions.apple.com/message/18848093#18848093
You also might want to consider filing a feedback report. A lot of people are having similiar problems:
http://www.apple.com/feedback/
If you monitor the "More Like This" box (top right), other threads appear. Opening them usually displays other threads.

I can not connect to server when all other devices in house can

Why can't I connect my iPad to the server when all other devices can?

You may not really be connected to your WiFi network.
Your router may not have given your iPad a valid IP address. Go to Settings > Wifi > your network name and touch the ">" to the right to see the network details. If the IP address starts with 169 or is blank then your router didn't provide an IP address and you won't be able to access the Internet.
Sometimes the fix can be as simple as restarting your router (remove power for 30 seconds and restart). Next, reset network settings on your iPad (Settings > General > Reset > Reset network settings) and then attempt to connect. In other cases it might be necessary to update the router's firmware with the latest from the manufacturer's support web pages.
If you need more help please give more details on your network, i.e., your router make, model and version, the wifi security being used (WEP, WPA, WPA2), etc.

Can not connect to server when open new hardware target in Vivado 2014.2

hardware manager -> open a new hardware target-> connect to local server, and then the software stay connecting server, if i click cancel, it stay "canceling, please wait..."
at the same time, process of vcse_server and hw_server can be found in task manger, and the ISE can detect device via usb cable.

Use the" remote host" is feasible

My macbook is not connecting to wifi when working away from home (cafes,library etc). My phone connects no trouble but my laptop says connection timed out. Please help so that I can work away from home. Thank you

My laptop times out when connecting to wifi out of home. What do I need to do?
Please help.
Thank you.

Troubleshooting Wi-Fi issues in OS X
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About
Also try turning off Bluetooth

Can not connect to auxiliary when Duplicating

Hi all,
on 10g R2 on Windows 2003 , my auxiliary is in nomount state as it should and when I want to connect to by RMAn I have :
C:\Documents and Settings\Administrateur>rman nocatalog target sys@orcl2 auxiliary sys@TESTDUP
Recovery Manager: Release 10.2.0.4.0 - Production on Thu Feb 16 10:41:57 2012
Copyright (c) 1982, 2007, Oracle. All rights reserved.
target database Password:
connected to target database: ORCL2 (DBID=728416591)
using target database control file instead of recovery catalog
auxiliary database Password:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04006: error from auxiliary database: ORA-12528: TNS:listener: all appropriate instances are blocking new connections
C:\Documents and Settings\Administrateur>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 16-FEB-2012 10:42:50
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias                     LISTENER
Version                   TNSLSNR for 32-bit Windows: Version 10.2.0.4.0 - Production
Start Date                16-FEB-2012 10:40:29
Uptime                    0 days 0 hr. 2 min. 22 sec
Trace Level               off
Security                  ON: Local OS Authentication
SNMP                      OFF
Listener Parameter File   E:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Listener Log File         E:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=optim65-win)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "TESTDUP" has 1 instance(s).
Instance "TESTDUP", status BLOCKED, has 1 handler(s) for this service...
Service "TESTDUP_XPT" has 1 instance(s).
Instance "TESTDUP", status BLOCKED, has 1 handler(s) for this service...
Service "orcl2" has 1 instance(s).
Instance "orcl2", status READY, has 1 handler(s) for this service...
Service "orcl2XDB" has 1 instance(s).
Instance "orcl2", status READY, has 1 handler(s) for this service...
Service "orcl2_XPT" has 1 instance(s).
Instance "orcl2", status READY, has 1 handler(s) for this service...
The command completed successfully
C:\Documents and Settings\Administrateur>tnsping testdup
TNS Ping Utility for 32-bit Windows: Version 10.2.0.4.0 - Production on 16-FEB-2012 10:43:51
Copyright (c) 1997, 2007, Oracle. All rights reserved.
Used parameter files:
E:\oracle\product\10.2.0\db_1\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = optim65-win)(PORT = 1521)) (CONNECT_DATA = (SERVER
) (SERVICE_NAME = testdup)))
OK (10 msec)Any idea ?
Thank you.

yes thank you.
following worked :
From your link :
Option 1:Connect to the auxiliary instance using OS authentication (as /) and use password file authentication for target database and connect via Listener.For an example:
Here from auxiliary destination I issued the command and hence successfully connected.
bash-3.00$ rman target sys/a@neptune:1522/dbase AUXILIARY /
Great.

HP 250 G3 can not connect to modem when it returns from sleep

Similar Messages

Maybe you are looking for