HP 255 LAPTOP (Windows 8) MICROPHONE CANNOT BE MUTED---NEED HELP A.S.A.P!!!

Re: HP 255 microphone troubles.
Sorry! I typed "Windows XP" in the original heading, My bad!
NEED HELP IMMEDIATELY!!!
When I click on the Sound Icon in the lower right corner of the screen and select "Mixer" THERE IS NO MICROPHONE CONTROL!
I've gone into the Control Panel searching for it, typed "microphone" in the "Search" box at the upper right of the screen and...NOITHING!
THE MICROPHONE IS CAUSING A NASTY UNGROUNDED-LIKE SOUND WHICH IS QUITE LOUD.
I CANNOT RECORD VOICE OVERS (MY BREAD & BUTTER) WITH THIS INTERFERENCE! The internal microphone MUST BE MUTED/DISABLED OR DELETED!!
How do I go about doing this? I have deadlines to meet. This is a matter of utmost importance!
Your reply via Email would be appreciated greatly.
Thank You!,
VOArtist
This question was solved.
View Solution.

Try this:
Follow these steps to disable the built-in microphone.
a.     On the extreme right side of the Task Bar, right-click on the Speakers symbol and select Sounds.
b.     In the Recording Tab, right-click on the microphone and select Disable.
c.      Click on OK.
d.     If there is more than one, disable all.
Check if the issue is resolved.
If you want to enable the microphone, follow these steps:
a.     On the extreme right side of the Task Bar, right-click on the Speakers symbol and select Sounds.
b.     In the Recording Tab, right-click on empty space and select Show Disabled Devices.
c.      Right-click on the microphone and select Enable.
d.     Click on OK.

Similar Messages

  • HP Envy 110e printer (D411a) will not install with me using Windows 8 Consumer Preview. I need help

    Just pick up the new HP Envy D411a printer, i set up with my wi-fi and all was going well until i put the disk in my PC . Just to find out that my NEW printer will not work with the Windows 8 Consumer Preview . I need help with this or until UP update the new printer to work with Windows 8, which will be on the market soon. Can some one please HELP ME

    Available now is print and scan capability that HP worked with Microsoft to include into Windows 8.
    The Printer Install Wizard can provide you additional information:
    http://h30434.www3.hp.com/t5/Windows-8-Consumer-Preview/How-to-Get-Your-Inkjet-Printer-Working-with-...
    If I have helped you solve your issue please mark it as solved .....
    (I am an HP employee)

  • HT2729 how can i transfer hindi songs from laptop (window ultimate) to new ipad ? pl. help

    how can i transfer hindi songs from laptop (window ultimate) to new ipad ? pl. help

    If you haven't already done so then download and install iTunes : http://www.apple.com/itunes/download/
    Add the songs into your computer's iTunes via File > Add To Library
    Connect the iPad to your computer and select it on the left-hand side of your computer's iTunes, and on the right-hand side there should be a series of tabs, one of which should be Music - if you select that tab you can then select which of your iTunes music to sync to the iPad (it should sync to the Music app on the iPad).
    Syncing music : http://support.apple.com/kb/HT1351

  • Compaq CQ56 154 laptop windows 7 recovery process fails. PLEASE HELP

    Compaq CQ56 laptop windows 7 recovery process fails because RM component runtime and no valid RP index. PLEASE HELP
    I have tried the recovery process on this laptop over 10 times now and with multiple new hdds and it seems like it comes to a fail at the very end.I have posted the error log that I get. Please help me out in regards to this. 
    The process completes unit and at the very end the error log gives this:
    Error encountered during RM component run time            
    Please contact RM team for investigation            
                        CopyRight @   SRD.cpp :   12                      CopyRight @   SRD.cpp :   13 SRD 1.1.0.0115 System Recovery Deployment, provided by CyberLink. (cNB)       
                        CopyRight @    SRD.cpp :  14           DeployRp:etSRDMode @ DeployRp.cpp : 3571 SetSRDMode 1          
                            wmain @    SRD.cpp :  73 Executing call 'L"drp.SetConfigIni('deployrp.ini')"'        
            DeployRp:etectMedia @ DeployRp.cpp :  371 Start to detect disks ...         
                  DeployRp:etUp @ DeployRp.cpp :  630 Get User Partition drive letter : c.        
            DeployRp:etectMedia @ DeployRp.cpp :  563 Disk Index : [HDD] 0, [N/A] -1         
          DeployRp:etTargetDisk @ DeployRp.cpp :  571 Start to load ini ...          
                  DeployRp:etUp @ DeployRp.cpp :  630 Get User Partition drive letter : c.        
                 DeployRp:etBp @ DeployRp.cpp :  643 Start to find Build Partition drive letter.        
                  DeployRp:etBp @ DeployRp.cpp :  650 Build Partition drive letter : c.         
          BuildConfig::LoadConfig @ BuildConfig.cpp :   28 Loading C:\RM\Tools\DeployRP\build.ini ...        
          BuildConfig::LoadConfig @ BuildConfig.cpp :  111 C:\RM\Tools\DeployRP\build.ini loading complete.       
                            wmain @    SRD.cpp :  83 Executing call 'L"drp.LoadBuildIni()"'         
           DeployRp::CheckRpExist @ DeployRp.cpp :  713 Start to check whether Rp exists.        
           DeployRp::CheckRpExist @ DeployRp.cpp :  750 Recovery Partition doesn't exist.        
    DeployRp::CheckSystemRecoveryDoneFlag @ DeployRp.cpp : 757 Start to check whether SystemRecoveryDone.flg exists.     
    DeployRp::CheckSystemRecoveryDoneFlag @ DeployRp.cpp : 794 SystemRecoveryDone.flg doesn't exist.      
           DeployRp::InstallMSXML @ DeployRp.cpp : 1248 Start to install MSXML6.dll         
           DeployRp::InstallMSXML @ DeployRp.cpp : 1292 Install MSXML6.DLL complete.        
          DeployRp::CreateLangIni @ DeployRp.cpp :  331 Create Lang.ini command: C:\RM\Tools\DeployRP\CreateLangIni.exe c     
         DeployRp::CheckSSRDFlags @ DeployRp.cpp : 1044 Start to check if SSRD flags exist        
         DeployRp::CheckSSRDFlags @ DeployRp.cpp : 1061 SSRD flags do not exist         
         DeployRp::CheckSSRDFlags @ DeployRp.cpp : 1063 Check if SSRD flags exist complete        
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1363 Creating BootRM.wim ...         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1374 Start to do setting.         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1377 SetWimImageDstPath.         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1382 Check tool existence.         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1385 Tool Path: c:\RM\Tools\opktools\dism.exe       
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1389 Dism.exe exists.         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1392 SetWimMountPath.         
        CWimMgr:etWimMountPath @ WimMgr.cpp :  199 Wim File Mounting Path = C:\RM\Tools\DeployRP\mount\      
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1397 SetLanguagePacksPath.         
       DeployRp::CreateBootRMWim @ DeployRp.cpp : 1402 SetToolsPath.          
            CWimMgr:etToolsPath @ WimMgr.cpp :  213 [SetToolsPath] lpszToolsPath = c:\RM\Tools\opktools\      
          CWimMgr:etToolsPath @ WimMgr.cpp :  220 [SetToolsPath] m_szDISMExeFullPath = c:\RM\Tools\opktools\dism.exe     
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1406 Setting complete.         
       DeployRp::CreateBootRMWim @ DeployRp.cpp : 1411 Start to do Initialization.         
             CWimMgr::InitWimMgr @ WimMgr.cpp :  358 Windows PE Source Path = c:\RM\RP\sources\boot.wim      
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1420 Initialization complete.         
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1423 Start to mount WIM image.        
           CWimMgr::MountWimImage @ WimMgr.cpp :  437 Temp Working Path = C:\RM\Tools\DeployRP\temp\      
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1426 Mount WIM image complete.        
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1431 Start to setup language packs...        
       DeployRp::GetSupportedLang @ DeployRp.cpp : 1639 Lang.ini path: c:\RM\Tools\DeployRp\lang.ini       
       DeployRp::GetSupportedLang @ DeployRp.cpp : 1678 Supported Languages :           
        CWimMgr:etWinPELanguage @ WimMgr.cpp : 1134 CWimMgr:etWinPELanguage - Enter       
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1437 Setup language packs complete.        
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1443 Start to setup tool's language packages...       
            CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-setup.cab   
            CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-Scripting.cab   
            CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-SRT.cab   
            CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-WMI.cab   
            CWimMgr:etupPackage @ WimMgr.cpp : 1327 Package does not exist: c:\RM\Tools\DeployRp\WinPE_LangPacks\64\winpe-wds-tools.cab   
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1450 Setup tool's language packages complete.       
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1452 Start to un-mount WIM image...        
        DeployRp::CreateBootRMWim @ DeployRp.cpp : 1455 Un-mount WIM Image complete.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1696 Start to estimate recovery partition size ...       
            DeployRp::CalculateRp @ DeployRp.cpp : 1709 base.wim.wim size : 12452203405 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1725 install.log file size : 623780 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1735 WinRE and WinPe files size : 281055618 bytes.       
            DeployRp::CalculateRp @ DeployRp.cpp : 1740 RM Software size : 63933517 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1745 BootRM.wim size : 268793098 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1750 Patch Folder size : 369308088 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1755 File4Rp Folder size : 0 bytes.         
            DeployRp::CalculateRp @ DeployRp.cpp : 1761 Extra space : 2371154178 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1766 Prevented Extra size : 0 bytes.        
            DeployRp::CalculateRp @ DeployRp.cpp : 1776 Recovery Partition estimated size : 15807695464 bytes.      
            DeployRp::CalculateRp @ DeployRp.cpp : 1777 Recovery partition estimation complete.        
               DeployRp::CreateRp @ DeployRp.cpp : 2072 Start to create recovery partition ...        
                    DetToolRpInfo @ DeployRp.cpp :  122 PartitionCount: 4. PartitionType: 0. PartitionNumber: 0. PartitionStartAddr: 0 bytes. PartitionLength: 0 bytes  
                    DetToolRpInfo @ DeployRp.cpp :  122 PartitionCount: 4. PartitionType: 12. PartitionNumber: 3. PartitionStartAddr: 79917219840 bytes. PartitionLength: 108093440 bytes
                    DetToolRpInfo @ DeployRp.cpp :  122 PartitionCount: 4. PartitionType: 7. PartitionNumber: 2. PartitionStartAddr: 209715200 bytes. PartitionLength: 73013395456 bytes
                    DetToolRpInfo @ DeployRp.cpp :  122 PartitionCount: 4. PartitionType: 7. PartitionNumber: 1. PartitionStartAddr: 1048576 bytes. PartitionLength: 208666624 bytes
                    DetToolRpInfo @ DeployRp.cpp :  156 Can't find valid Rp index.         
               DeployRp::CreateRp @ DeployRp.cpp : 2090 Invalid Rp index          
                            wmain @    SRD.cpp :  93 Executing call 'L"drp.Deploy()"'         
                            wmain @    SRD.cpp :  38 Output            
    ERROR: call L"drp.Deploy()" failed.             
                           wmain @    SRD.cpp :  38 Output - Returned HRESULT = 0xe0ef002f    

    Hello k877
    I am sorry to hear you are having issues reinstalling your operating system. I am providing you with a link here to a document titled Recovery Disk Creation Error Codes (Windows 7). Now document is for creating the recovery disks but the error is showing up in your error log (0xe0ef002f). The error according to the document is the File/directory does not exist. It looks like a function call Deploy() is attempting to access this File/directory and is unable to.
    This leads me to think that it is the disks that you are using. It would stand to reason anyways as you state you have tried this on multiple hard drives. A good test would be to check to see if your error in the error log is the same every time. If it is happening at the same point each time then simply order a new set of discs from here.
    I hope this resolves your installation issue. Thank you for posting your question on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Windows phone error code 80188301,. please need help

    i am getting an error while updating my windows phone.  windows phone error code 80188301,.
    please need help

    Hi,
    If issue persists after using the solutions provided by Aman Raizada, then I would suggest you ask the question in Windows Phone support forum:
    http://www.windowsphone.com/en-US/how-to/wp-support
    Regards
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • My Mac Won't Read Windows XP Pro Disk T_T  I Need Help...

    My Mac will not read my XP Pro disc. It is not an original but it is an exact copy that runs perfectly on a PC. I have been told by a number of people that there is no reason that it won't work. I simply tell Boot Camp Assistant to start the installer and it says it can't find the installation disk. Is there something wrong with my computer???

    On the offensive, eh? For the record, I wasn't trying to bash you, I simply read your posts and they all gave off the same "hate" for Boot Camp, so I thought I would inquire a little further into the matter.
    If you can't load Windows and you want to eject the disc, press the alt/option key at start up, select your Mac partition and eject the disc from there. Sure, an eject button could come in handy at times, but aesthetics are also a big part of any Mac computer. A big honking eject button on an otherwise smooth surface would be rather obtrusive. Even if you did have an Apple Keyboard, and Windows wouldn't load, you still wouldn't get anywhere because you wouldn't have any Apple Keyboard driver to acknowledge the eject button is even there, unless you quickly pressed it at the white boot screen, and I'm not even sure if that would work.
    "You've loaded "tons" of windows on your mac, and did not have a problem...I gather that I've seen your "helpful and insightful" Mac directions, somewhere here on these forums, guiding Windows users to the answer, correct?"
    Is this an insult? I'm not sure... Yeah, I've helped people with their problems on here... man, I must be a real ****.
    "I may appear to be a fanboy of PC's too you, but at least we PC users can get help somewhere on the internet, that other users can relate with and point us in the right direction..."
    http://discussions.apple.com
    "Apple-ites seem to want to bash people who LIKE the ease of Windows (and common-sense buttons on our hardware, called Eject!)"
    When did I bash any Windows/PC hardware or software? If I wanted to bash Windows, why would I have it installed on my Mac? I'm sure there are a few buttholes on this forum that are, "omg y wud u install Windoz on Mac, u'll ruin ittuhh!1!!!one!", however, the majority of the people on the forum are rather kind and will attempt to help with whatever problem you/someone may have. Again, a big part of Macs are aesthetics.
    "if we happen to spend our dollars on a mac, the least you guys can do is APPRECIATE that we are trying to gravitate to the mac, but are having problems UNDERSTANDING decades of your culture...instead of finding fault in every little question on the mac's difficult usage and expecting us to humble ourselves for a little insight to our problem!"
    How are you supposed to find a solution if you can't find the fault? The user controls the computer, more often than not, it's the user that makes the mistakes, the computer doesn't just mess itself up. (not accusing you or anything, just saying.)
    Again, this wasn't an attempt to bash, but going around claiming Boot Camp is trash isn't the best way to introduce yourself. Boot Camp on the Mac side doesn't even really do anything, simply partitions the hard drive. On the Windows side, it simply installs drivers. There's nothing to really hate.
    If you'd like help with your Windows problems, I'd be glad to help, only if you choose to open your mind, accept help and not think of it as "ridiculing" or "finding faults".

  • Hp Pavilion a6863w getting disc boot error..can't get windows vista to open...need help diagnosing

    My computer will not open Windows Vista.. I get a disc boot error. I have run a few diagnostics but need help to preceed. Have important files on the computer I need access to. Can anyone help walk me through the process? Thanks  Also when I look at the check s that have been done it says something about a registry problem.  HP Pavilion a 6863w 
    {Edited for privacy}

    Have you run a Hard Drive test in BIOS?
    Jennifer P
    I work for HP.
    Please select the "Accept as Solution" button on the post that best answers your question. Also, you may select the "Kudos" button on any helpful post to give that person a quick thanks

  • Windows 7 and Bonjour--Printer issue--Need Help ASAP, Please!

    Okay, add my name to the growing list of people with Windows 7 issues. (Actually, add my wife's name. I have a Mac, and I'm glad I do.)
    Anyway--she has a new HP laptop with Windows 7 preloaded. We use Airport Express as a wireless router for our 5 year old HP PSC 1350 all in one printer, requiring the use of Bonjour 1.0.6 on her new laptop to print wirelessly. Except it is only printing about 2/3's of a page and quitting. This also fouls up the printing que, meaning nothing else will print on her unit. (I have not tried printing from the Mac while her HP is AFU.)
    How do I rectify this, other than taking her HP back and getting the Mac she'd be happier with?
    Any and all help would be greatly appreciated, as she's in school and needs to print a lot of papers.
    Doc

    There has been no satisfactory answer to this. So, no, my question isn't really answered.
    Instead, we bought a new wireless printer, and I removed Bonjour and AirPort from her Windoze 7 unit.
    I'm not so thrilled, but she's happy. And if she's happy, it's okay.
    I guess.
    Doc

  • Xfi Xtreme Audio Problems with Microphone and other things NEED HELP!!!!

    ? Alright i have exhausted my search for an answer for my problems.... This is a last resort now!
    Im running Windows 7
    st Problem: I was having problems with my microphone where people heard themselves through my microphone. Ok well i have a creative Fatility series headset with a supposed noise canceling mic. So last night i was like screw it imma put in the install disk for my sound card Xfi Xtreme Audio.
    This Arose my 2nd Problem: Now that the drivers were installed and i finaly got a volume panel it says im running Windows Vista. The name next to my card says Sound Blast X-Fi Xtreme Audio (Vista). Alright so i am running windows 7.... What the heck! Next thing is my microphone doesnt even work! This is just awsome btw and im pretty sure the volume panel isnt even the way it was when i was on an XP system.
    So if anyone has a fix to this problem let me know it would be great!

    A quick update i was able to fix Problem 2, i had to get rid of what i installed so im just back to Problem . I dont have the VOlume Panel anymore but my microphone still seems to make it so that people can hear themselves....

  • VPS windows server 2008r2 RDP security issue, need help!

    system: VPS windows server 2008r2 at a remote location, directly exposed to internet
    Administration is possible only via Remote
    Desktop.
    I cannot disable&replace the default administrator account with a different username...which means I get a lot of brute force attacks.
    I created rules in the firewall to limit the scope of the remote IP addresses, even limited the scope of the RDP rules down to my client IP address only.I tested the rules by trying to
    access the vps server from a wifi hotspot (starbucks was useful for once) and indeed I was not to rdp into myserver.
    Yet I still find Nigerian , chinese taiwanese iranian and so on based IP addresses in the event log under audit failures. 
    I didn't want to limit the ip scope, because if my ISP changed my IP address ,I'd lose access to my VPS server... then again, why are the Nigerians still getting in?
    Anyway,
    is there a way to replace the username and password login with a public/private key method like it is under Linux? Or perhaps is there a better solution?
    Hope someone can help.
    Thank you in advance! 
    Paolo

    So, your suggestion gave me an idea.
    First I discovered why the Nigerians could keep getting in....a rule for utorrent opened everything...! That rule is gone now.
    The idea is as following: lock the RDP to the one ip address I use but install a SSH server open to any IP address that mandates key pair based logon only,using a public/private key pair that I only obviously have.
    Brute force will never work on a key pair only login shell. Let them
    try it if they want. (Assuming nobody manages to crack my home network and steal my files :-)
    If my ISP changes my ipaddress, I can login via SSH and modify the firewall rule (which I tested already).
    Of course this works for people like me who just have a VPS server for personal use with a very clear knowledge from which ipaddress they access their server.
    Anyway..hahahah take this Nigerians & Co hackers!
    Ok thanks for your inspiring suggestion!

  • Windows 2012 Nodes - Slow CSV Performance - Need help to resolve my iSCSI issue configuration

    I spent weeks going over the forums and the net for any publications and advice on how to optimize iSCSI connections and i'm about to give up.  I really need some help in determining if its something i'm not configuring right or maybe its an equipment
    issue. 
    Hardware:
    2x Windows 2012 Hosts with 10 Nics (same NIC configuration) in a Failover Cluster sharing a CSV LUN. 
    3x NICs Teamed for Host/Live Migration (192.168.0.x)
    2x NICS teamed for Hyper-V Switch 1 (192.168.0.x)
    1x NIC teamed for Hyper-V Switch 2 (192.168.10.x)
    4x NICs for iSCSI traffic (192.168.0.x, 192.168.10.x, 192.168.20.x 192.168.30.x)
    Jumbo frames and flow control turned on all the NICs on the host.  IpV6 disabled.  Client for Microsoft Network, File/Printing Sharing Disabled on iSCSI NICs. 
    MPIO Least Queue selected.  Round Robin gives me an error message saying "The parameter is incorrect.  The round robin policy attempts to evenly distribute incoming requests to all processing paths. "
    Netgear ReadyNas 3200
    4x NICs for iSCSI traffic ((192.168.0.x, 192.168.10.x, 192.168.20.x 192.168.30.x)
    Network Hardware:
    Cisco 2960S managed switch - Flow control on, Spanning Tree on, Jumbo Frames at 9k - this is for the .0 subnet
    Netgear unmanaged switch - Flow control on, Jumbo Frames at 9k - this is for .10 subnet
    Netgear unmanaged switch - Flow control on, Jumbo Frames at 9k - this is for .20 subnet
    Netgear unmanaged switch - Flow control on, Jumbo Frames at 9k - this is for .30 subnet
    Host Configuration (things I tried turning on and off):
    Autotuning 
    RSS
    Chimney Offload
    I have 8 VMs stored in the CSV.  When try to load all 8 up at the same time, they bog down.  Each VM loads very slowly and when they eventually come up, most of the important services did not start.  I have to load
    them up 1 or 2 at a time.  Even then the performance is nothing like if they were loading up on the Host itself (VHD stored on the host's hdd).  This is what prompted me to add in more iSCSI connections to see if I can improve the VM's
    performance.  Even with 4 iSCSI connections, I feel nothing has changed.  The VMs still start up slowly and services do not load right.  If I distribute the load with 4 VMs on Host 1 and 4 VMs on Host 2, the load up
    times do not change. 
    As a manual test for file copy speed, I moved the cluster resources to Host 1 and copied a VM from the CSV and onto the Host.   The speed would start out around 250megs/sec and then eventually drop down to about 50/60 megs/sec.  If I turn
    off all iSCSI connections except one, it get the same speed.  I can verify from the Windows Performance Tab under Task Manager that all the NICS are distributing traffic evenly, but something is just limiting the flow.  Like what I stated on top,
    I played around with autotuning, RSS and chimney offload and none of it makes a difference. 
    The VMs have been converted to VHDx and to fixed size.  That did not help.   
    Is there something I'm not doing right?   I am working with Netgear support and they are puzzled as well.  The ReadyNas device should easily be able to handle it. 
    Please help!  I pulled my hair out over this for the past two months and I'm about to give up and just ditch clustering all together and just run the VMs off the hosts themselves. 
    George

    A few things...
    For starters, I recommend opening a case with Microsoft support.  They will be able to dig in and help you...
    Turn on the CSV Cache, it will boost your performance 
    http://blogs.msdn.com/b/clustering/archive/2012/03/22/10286676.aspx
    A file copy has no resemblance of the unbuffered I/O a VM does... so don't use that as a comparison, as you are comparing apples to oranges.
    Do you see any I/O performance difference between the coordinator node and the non-coordinator nodes?  Basically, see which node owns the cluster Physical Disk resource... measure the performance.  Then move the Physical Disk resource for the
    CSV volume to another node, and repeat the same measure of performance... then compare them.
    Your IP addressing seems odd...  you show multiple networks on 192.168.0.x and also on 192.168.10.x.   Remember that clustering only recognizes and uses 1 logical interface per IP subnet.  I would triple check all your IP schemes...
    to ensure they are all different logical networks.
    Check you binding order
    Make sure you NIC drivers and NIC firmware are updated
    Make sure you don't have IPsec enabled, that will significantly impact your network performance
    For the iSCSI Software Initiator, when you did your connection... make sure you didn't do a 'Quick Connect'... that will do a wildcard and connect over any network.  You want to specify your dedicated iSCSI network
    No idea what the performance capabilities of the ReadyNas is...  this could all likely be associated with the shared storage.
    What speed NIC's are you using?   I hope at least 10 GB...
    Hope that helps...
    Elden
    Hi Elden,
    2. CSV is turned on, I have 4GB dedicated from each host to it.  With IOmeter running within the VMs, I do see the read speed jumped up 4-5x fold but the write speed stays the same (which according to the doc it should).  But even with the read
    speed that high, the VMs are not starting up quickly.  
    4. I do not see any difference with IO with coordinator and non coordinator nodes.  
    5.  I'm not 100% sure what your saying about my IPs.  Maybe if I list it out, you can help explain further.  
    Host 1 - 192.168.0.241 (Host/LM IP), Undefined IP on the 192.168.0.x network (Hyper-V Port 1), Undefined IP on the 192.168.10.x network (Hyper- V port 2), 192.168.0.220 (iSCSI 1), 192.168.10.10 (iSCSI2), 192.168.20.10(iSCSI 3), 192.168.30.10 (iSCSI 4)
    The Hyper-V ports are undefined because the VMs themselves have static ips.  
    0.220 host NIC connects with the .231 NIC of the NAS
    10.10 host NIC connects with the 10.100 NIC of the NAS
    20.10 host NIC connects with the 20.100 NIC of the NAS
    30.10 host NIC connects with the 30.100 NIC of the NAS
    Host 2 - 192.168.0.245 (Host/LM IP), Undefined IP on the 192.168.0.x network (Hyper-V Port 1), Undefined IP on the 192.168.10.x network (Hyper- V port 2), 192.168.0.221 (iSCSI 1), 192.168.10.20 (iSCSI2), 192.168.20.20(iSCSI 3), 192.168.30.20 (iSCSI 4)
    The Hyper-V ports are undefined because the VMs themselves have static ips.  
    0.221 host NIC connects with the .231 NIC of the NAS
    10.20 host NIC connects with the 10.100 NIC of the NAS
    20.20 host NIC connects with the 20.100 NIC of the NAS
    30.20 host NIC connects with the 30.100 NIC of the NAS
    6. Binding orders are all correct.
    7. Nic drivers are all updated.  Didn't check the firmware.
    8. I do not know about IPSec...let me look into it.  
    9. I did not do quick connect, each iscsi connection is defined using a specific source ip and specific target ip.  
    These are all 1gigabit nics, which is the reason why I have so many NICs...otherwise there would be no reason for me to have 4 iscsi connections.  

  • Windows 7 64bit on a t500 - need help.

    Hi, I've just bought 2 banks of memory of 4 gb for my T500.
    To use them i need to install Windows 7 64 bit.
    I put the new OS on a USB pendrive but when I start the system I read in tehe screen " missing operating system".
    The pen is ok as I used it on other pc without any problem.
    Could you help me please?
    Solved!
    Go to Solution.

    welcome to the community.
    3 questions...
    how did you "put the OS on a USB pendrive"?
    are you sure that the usb stick is set up as bootable?
    did you set the BIOS boot order to "see" the USB stick first?
    regards.
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество
    Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
    PM requests for individual support are not answered. If a post solves your issue, please mark it so.
    X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
    I am not a Lenovo employee.

  • Windows 7 on iMAC 27" , I need help in the decision please?

    Hi All,
    I just got the iMAC 27" i7 with 4GB RAM and planning to upgrade to 8GB soon. I need to install Windows, but as I heard that BOOTCAMP supports vista and windows 7 is not officially supported,
    should i go for vista?
    or try to install windows 7? what are the issues?
    * If windows 7, should I go to Windows 7 64bit & why?
    I do really need some guidance in this one....

    Hi and welcome to Discussions,
    Apples BootCamp lets you install a 32-bit Windows XP with at least SP2 or Windows Vista onto an Intel-based Mac.
    And 64-bit Windows Vista on these Macs http://support.apple.com/kb/HT1846
    Windows 7 support is currently in the pipeline.
    See the Tech Specs of BootCamp here http://support.apple.com/kb/HT1899
    And the announcement of Windows 7 support http://support.apple.com/kb/HT3920
    Personally I use XP 32-bit and never had any problem.
    I avoided Vista since I don't need it and therefor see no reason to shell out money for it.
    Quite a lot of people have already installed Windows 7 even without official support from Apple.
    The hatter has an ongoing thread full of helpful tips about Windows 7 http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=15
    With the 8GB RAM you plan to get I would suggest the 64-bit version of Windows 7, since with 32-bit Windows you won't be able to use all the RAM.
    Regards
    Stefan

  • I backed up 10.4 but cannot migrate data, need help

    Hi, New here. I had a 1 on 1 training and was recommended to back up my computer (Tiger OS) which I did. I installed Leopard, but cannot migrate data back. I backed up on a USB IOmega drive. The person I spoke with at the apple store either did not know or did not remember to tell me to turn off the File Vault. Now I cannot bring back much of the data or settings I had.
    Here's my question, If I reinstall Tiger, will I be able to transfer the data back from the back-up drive, and then just do an upgrade instead of a complete fresh install of Leopard?
    Thanks,
    Mike

    You should be able to mount your file vault directory- the sparse image- within Leopard from your backup, and then copy the data to your new user directory.
    You should be able to copy the data from your backup drive if you re-install Tiger, but since its not clear why you can't copy the data from the drive now, its not clear whether the issue preventing you from getting at it will go away after you reinstall Tiger.
    I think maybe you might want to restate your problem in more detail.

  • Uninstalled without deactivating, now cannot reinstall.  Need help

    Photoshop elements 8 began crashing when I try to edit a photo.  So I uninstalled, thought I would reinstall.  Now I have discovered I cannot reinstall because I did not deactivate.  Can anyone help me?

    Customer Care, Call or Chat under the Contact Customer Care
    We are not Adobe Employees, but forum volunteers, so we are unable to handle activations.
    Also Photoshop Elements has a separate forum, and they are the best at Elements issues. Photoshop Elements
    Gene

Maybe you are looking for

  • Trouble upgrading to kernel 2.6.22 [SOLVED]

    Hi, It's been awhile since I updated my system.  Ran pacman -Syu today, and I'm now having difficulty booting to the new kernel.  On boot, at "loading Modules", the system is responding: FATAL: Could not load /lib/modules/2.6.21-ARCH/modules.dep Ther

  • OSX lion

    just brought my macbookpro one week ago, can i download osx lion for free?

  • About Drag and drop issue

    As title, i am a newbie to flash using ActionScript 2.0 , and currently i enounter the problem with drag and drop coding. Below is my code: function dragSetup(clip, targ, position) { clip.onPress = function() { startDrag(this); clip.x +=2; clip.swapD

  • Xcelsius Engage 2008 installation error - office xp required

    I'm install a new machine, moving my applications from Vista to 7. On the new system i've already installed Office 2010.. I am trying to install Xcelsius Engage 2008 and recieve the following error msg's: 1. Office XP application: Excel, Word, Outloo

  • I accidently deleted a folder on my storage card. Can it be recovered?

    I have the new (Sprint) Treo 800w. I accidently deleted a folder on my storage card. Is there a trash can on the phone? I tried to recovery in the active sync folder, however it only shows item that are on the device. Is there anyway I can recovery t