HP 2550L problem with printing in colors

Hello
I just reinstall my computer (win XP ) and install back printer HP2550L but doesn't do color printing. I did install the drivers from your page and put there new cartriges but nothing helps. When I do testprint , this one is in all color full, but when I try to print some color files they are just black and white.
Can you help
Thanks Patrik

This is related to printer settings. Nothinh to doas far as coding is concerned. Just check the printer settings in SPAD transaction. You can contact your basis team or your superior.
Regards,
Nageswar

Similar Messages

Problem with printing true colors

Had PSE7 and colors printed true and beautiful. Upgraded to PSE10 and all of a sudden colors printed muddy and dull with purplish overcast. Took printer in for service but problem persisted. Upgraded to PSE11 and once again colors were printing true and beautiful for over a year. Printed a card about 5 days ago using PSE11 - beautiful. Printed a card yesterday using PSE11 and colors muddy and dull with purplish overtones. Installed PSE13 and colors printing dull, muddy with purplish overcast.. I feel it is a problem somewhere in settings of PSE, but can't figure out where. I don't think it is a problem with printer. Both printer and PSE set to Adobe RGB. Color control set to optimize for printer. Using PC with Windows 7, 64 bit. Printer is Epson stylus photo 1400. Thanks for any help, Merrie

See if this helps:
http://helpx.adobe.com/photoshop-elements/kb/color-management-settings-best-print.html

Problems with printing( hp Color LaserJet)

Printer HP Color LaserJet 1500L under Mac OS 10.4.2 Tiger refuses to work normally. It prints 1 or sometimes 2 sheets of paper and then it stops working. All other tasks just move from the active category into completed one without any printing. Printer's indicator starts to wink but then it stops and nothing more happens. The next printing begins only after switching the printer off and on or after restarting operation system. After this it prints 1 or 2 pages and everything begins again. We tryed to use standart drivers which were attached to the printer and the drivers which we downloaded from the HP official site. There is no difference. We tryed to connect the printer to another Macintosh computer under Mas OS X 10.4.2 but the problems didn't disappear. Also we tryed to change USB cable between the printer and the computer. It also didn't matter. Before it the printer worked under Windows XP normally without any problems.

Same printer, similar problems. I get stopped jobs that refuse to print even after I hit the start printing button. There is a message on this site tackling this issue for an Epson printer. Haven’t tried it out yet myself.
MacBook Pro Mac OS X (10.4.6)

HP Laserjet 2550L Won't Print In Color

I recently upgraded to Leopard, and now my HP Laserjet 2550L will not print in color. I've tried printing for several different apps, but they always come out in b & w. It does however print in color when printing a test page from the printer itself, so it must be a driver issue.
Currently I'm running with the "HP color Laserjet 2550 series" driver available via PPDPicker. I've also tried several other drivers listed there to see if by chance one of them would work, but to no avail. I downloaded and tried installing HP Laserjet v5.5.2.051 from HP's website, but I can't get it to install. Actually this driver doesn't even show up in PPDPicker, because for some reason it saves as a text file, which seems weird since the dmg file is about 17mb.
Anyway, this has been driving me nuts all night, so if anyone has a solution or suggestion, I'm all ears.
Thanks.

I see you are having a print quality issue, no color on page, with your M251nw Laserjet. You changed the toner cartridges and the printer is still not printing in color. Have you tried taking all the color toner cartridges out of the printer and reseating them to make sure they are secure in their positions?
As well, I would advise taking a look at the document linked below. It will walk you through the process for troubleshooting a print quality issue with this printer.
Troubleshooting Print Quality Issues
Let me know the results.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

C4180 problem with printing photos

have a problem with printing photos on my C4180. Got a color photo ink 348 but the printer prints photos only in balck and white, anyone knows how to fix it??

printer model?
operating system?
Although I am working on behalf of HP, I am speaking for myself and not for HP.
Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
Happy Troubleshooting : )

Color problem with ProPhoto RGB color space

Hi, everyone,
I have wery special problem I think. I use MacBook pro 15" with retina display, adobe Photoshop CC and when I export RAW (from Nikon D7000) from Lightroom 5 to Photoshop with settings: 16 bit TIF, color space: ProPhoto RGB I have a problem with displaying the correct colors. As you can see in this picture:
My problem are some "green" artefacts in absolutely black and white picture. I tried myself to solve this problem and found the following facts: when I convert picture into Adobe RGB or sRGB color space is everything OK - without green artefacts.
But here is one important fact: I have calibrated monitor by datacolor spyder4elite and problem with ProPhoto RGB incorrect color displaying is only when the color calibration configuration is loaded. When I change my display calibration to standard apple color LCD profile than is everything OK.
But using uncalibrated monitor and also Adobe RGB color space are no right solutions for me.
My question is why I have problem with displaying ProPhoto RGB color space in photoshop under calibrated monitor profile and can anybody help me please?
Thanks for answers.

That's a classic example of the basic problem with 16 bit color. There is no solution that I know of.

HP Officejet Pro 8600 "Problem with Printer or Ink System'

A gander at this forum suggests I am one ofa multitude of people perplexed by this issue. There is a notation beside one enquiry which says 'Problem Solved'.... well it isn't for me. My printer (typical!) is one month out of warranty. I had to replace the black cartridge and, when I did, it came up with this error prompt. I then replaced all the other cartridges. HP suggests removing the printhead and following that they say place it 'upside down on a clean sheet of paper'... NO instructions for cleaning it!! When it is replaced in the printer they suggest you 'rock the printhead left and right to make sure that the printhead fully seats in the carriage' and if THIS doesn't fix things 'try reseating the printhead up to 3 times'... This in itself is an admission of an 'issue' with this product. It doesn't sound like a very scientific engineering 'fix' to me!
A new printhead costs almost what we paid for the printer a year ago. I hate consigning anything to landfill that I can avoid... unfortunately it looks like that is where this unit belongs...

Hi @Robin_Perth,
Welcome to the HP Forums!
I am sorry to hear about you getting the problem with printer or ink system error, with your HP Officejet 8600, but I am happy to look into this for you!
I am assuming you have already been through this guide, A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup.
If this guide does not resolve the issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
This guide, Limited Warranty for HP Ink Cartridges and Customer-Replaceable Printheads for HP Inkjet Supplies, will help you to determine if your printhead is still in warranty or not.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP 4622 All in One Printer: Problem with Printer or Ink System

Problem with Printer or Ink System Error OXC19a0027.

charleshia wrote:
Thanks so much for replying to my post. I tried the fist suggestions and they did not work. So, I attempted to move on Dow to the cleaning of my printer. I am the the first to admit that I'm not the genius when it come to electronics buys, my printer do not seem to have what is described in the photos. I'd like to upload a photo of my ink cartage but do not know how.
Charleshia, you can upload a photo here to reply. Click Reply, then on the window you'll see the image below..
click the one which has the red box, it's where you insert the photo
Going back on your issue.. the basic step would be.. take out the inks then close the door... what error message you got? If it's saying "Missing Ink Cartridge" just hit OK. Unplug the power cable at back of the printer, plug it back in.. Clean the copper contacts on the ink cartridges using a lint free cloth then reinstall them. Let me know if it resolved it or not.. I can only give basic troubleshooting here

Problem with printing a PDF

Hi All,
I'm developing a web application written in J2EE that uses Java Reporting Component (JRC) to display crystal reports from some filters recovered from a jsp and passed to a report .rpt previously designed and invoked just at runtime.
I have a problem with printing a PDF:
I want, after entering the filters in a jsp, to print a report in PDF format (WORD) without opening it
with Adobe Reader (Microsoft Word). The class of API JRC used for export is ReportExportControl.
Can anyone help me?
I wish a great day to You all.

Hi Ted Ueda,
sorry for the delay of my answer.
I understand very well the problems related to security.
With the following code that I used to produce a report (PDF) at runtime,
is the PDF created on the server and then sent to the client, or is it directly created on the client as PDF
from RTF previously realized?
ReportExportControl exportControl = new ReportExportControl();
String report = report path;
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(report, OpenReportOptions._openAsReadOnly);
Object reportSource = null;
reportSource = reportClientDoc.getReportSource();
//The method setConnectionProperties() stores all the connection parameters in the collection
//ConnectioInfos
ConnectionInfos connInfos = setConnectionProperties(request, reportClientDoc);
exportControl.setEnableLogonPrompt(false);
exportControl.setEnableParameterPrompt(false);
exportControl.setReportSource(reportSource);
exportControl.setDatabaseLogonInfos(connInfos);
//Single method to pass parameters to Crystal Reports. Using classes ParameterFieldController and
//ParameterFieldDiscreteValue
setReportParametersValue(reportClientDoc, reportParameters, subReportParameters);
ExportOptions exportOptions = new ExportOptions();
//Set the export format (PDF)
exportOptions.setExportFormatType(ReportExportFormat.PDF);
PDFExportFormatOptions PDFExpOpts = new PDFExportFormatOptions();
exportOptions.setFormatOptions(PDFExpOpts);
exportControl.setExportOptions(exportOptions);
exportControl.setExportAsAttachment(true);
try {
      exportControl.getHtmlContent(request, response, getServletConfig().getServletContext());
} catch (ReportSDKExceptionBase e) {
throw new ApplicationException("error code", ": error message"); }
As, however, I predicted in my previous message about the direct printing on the client,
I read about ActiveX, but I don't know how to use them.
I read this information in the 'Crystal Reports for Eclipse Developer Guide' about "printMode" attribute:
"In ActiveX print mode, an ActiveX control is downloaded to the client machine and the report is send directly to the printer...."
The ActiveX alternative is a java applet that runs on the client and takes the pdf from the server and prints directly onto the clients through the commands that I used in the DOS command line:
1)     AcroRd32.exe /p /h FILENAME
where
/p = print
/h = hide window
to print the report and
2)     tkill AcroRd32
to close Adobe Reader, because it doesn't end automatically after printing and the command /h is used just to minimize the process.
I hope you can give me advice because I need to print directly on the client. Thank you

Problem with printing pdf file

hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank you

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problem with printing files created by tcpdf class

Hello,
I have problem with printing pdf files created with tcpdf php class which contain embedded fonts
http://www.tecnick.com/pagefiles/tcpdf/example_008.pdf
Could someone try to print that example file at his Reader (printing to file .ps will be fine).
I'm trying to determinate if problem is in my system (Ubuntu 8,04) in Reader or in class.
Thanks in advance

No problem with Adobe Reader 8 or 9 .

Problems with printer and network connectivity

So I've been using an HP B110a photosmart wireless e-all-in-one printer that I got with my macbook pro and at the start, everything worked perfectly in terms of wireless printing, ePrint, and AirPrint. But recently, when I try to print wirelessly, it says the printer is not connected and I also can't find it on the list of nearby printers on the 'add printer' window. I also had problems with printing via ePrint but those have cleared up (I don't know what was wrong but it's fine now). Printing with AirPrint on my iPod touch has stopped working as well because the printer doesn't show up when I search for nearby printers.
Here's what I've checked/tried so far:
All the wireless services are enabled on my printer and my mac
I've reset the printing system on my mac, printer settings to factory defaults
Restarted mac/printer/iPod
Restarted router
Reinstalled HP printing software that came with the printer
All software is up to date
Wireless printing on another windows computer does work
Setting up wireless printing using the HP install disc doesn't work
Trying to add a new printer using the HP software disc that came with the printer is unsuccessful in locating the printer as well.
Printing over USB is problem-free
When I tried restarting the printer/router, I could see the printer for just a few minutes in the 'add printer' list but then it would disappear from the list and the printer would be 'not connected' so I can't print wirelessly.
More info
MacBook Pro (13 inch, early 2011)
Mac OS X Lion (10.7.2)
HP Photosmart e-All-in-One B110a
Router is a Huawei HG556a that I got from Vodafone NZ
Thanks in advance!

http://support.apple.com/kb/DL907

Problem with printing ALV lists

Hey Guys,
I have a problem with printing ALV lists ,
I created a report with several ALV lists (not grids) on the same screen but when i attempt to print the report
it prints each alv list on a different page..so if i have 3 alv lists in the same report it will print the report on 3 pages
How can i print them all in one page?
Thanks in advance
Noha Salah.

Hey Max,
I tried setting the Layout-list_append before my block_list_append function call
And setting the is_print-NO_NEW_PAGE , it printed the 3 lists on one page the only problem i have
is that the lists are truncated and the list formats has totally been messed up..how can i restore them back
to their original format?

I had a problem with print preview of billing document.

HI all,
I had a problem with print preview of billing document which contains two output types ZR1 ZR2..
For the footer text of billing document I maintained the font size as 7,5 pts, But when i go for print preview from output type ZR1 the font size of footer text is very small and looks good for output type ZR2.
If i change the print options-->logical destination of output type ZR1 same as Output type ZR2, the footer text looks good.
I think there is some issue with logical destination in print options for the output type ZR1, how can i resolve it.

hi,
for both the output types , r u using same sapscript or smartform?
if yes then, u can control it in output options of smartform and also in sapscript , you can control through if condition.
and if differect sapscript or smartform then you should not get such problem.
you can check the sapscript or smartfrom in TNAPR table.

Problem with printing graphics in SAP Script

Hi,
I am facing problem with printing of graphics in SAP Script. I uploaded a bitmap file from pc to se78. Then I inserted it in SAP script.
I am able to view it in the printpreview as well as in the spool number. But it is not getting printed.
Plese tell me the solution.
Thanks,
Srinivas

You need to check your printer settings.Might be drivers are missing.

HP 2550L problem with printing in colors

Similar Messages

Maybe you are looking for